When allocating a CPU interrupt, make sure to select the correct
CPU core to query for it. Simply checking for the current CPU does
not satisfy this requirement because the CPU allocation thread may
be executed by the other core: it's necessary to stick with the
intended CPU passed as an argument of the `esp32s3_setup_irq`.
The registered `task_create_wrapper` receives the `core_id`, but
the current implementation ignores this parameter while calling
`esp_task_create_pinned_to_core`. This commit fix this.
When allocating a CPU interrupt, make sure to select the correct
CPU core to query for it. Simply checking for the current CPU does
not satisfy this requirement because the CPU allocation thread may
be executed by the other core: it's necessary to stick with the
intended CPU passed as an argument of the `esp32_setup_irq`.
clock_getcycle always returns an incremented cycle value
If the hardware does not support perf event it will use arch_alarm's up_perf_gettime
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
1) Previously adjustments less than 1 microsecond per tick would be
completely ignored. Now they are applied over a shorter period at
a rate of 1 us per tick.
2) Previously CLOCK_ADJTIME_PERIOD was in units of 1/100th of second.
Change to milliseconds to be more generally useful unit.
Change setting name to CLOCK_ADJTIME_PERIOD_MS to make the unit change
easier to notice.
3) Previously CLOCK_ADJTIME_SLEWLIMIT was in percentage.
Most clock crystals have better accuracy than 1%, so the minimum slew
rate was excessive. Change to CLOCK_ADJTIME_SLEWLIMIT_PPM with setting
value in parts per million.
4) No need to use floating point math in clock_adjtime.c.
The SHM physically backed memory does not belong to the user process,
but the page table containing the mapping does -> delete the page table
memory regardless.
Update the gcc compiler to 10.3-2021.10 to be able to compile the latest NuttX version
Fix for error:
arm-none-eabi-g++: error: unrecognized command line option '-std=gnu++20';
did you mean '-std=gnu++2a'?
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This is a collection of tweaks / optimizations to the driver to limit
CPU usage as well as interrupt processing times.
The changes are as follows:
- setfrequency is now no-op if the frequency does not change. Accessing
MPFS_SPI_CONTROL requires synchronization to the FIC domain, which
takes unnecessary time if nothing changes
- load/unload FIFO loops optimized so !buffer, priv->nbits and i==last are
only tested once (instead of for every word written in loop).
- Disable the RX interrupt only once (again, FIC domain access is slow)
- In case a spurious MPFS_SPI_DATA_RX interrupt arrives, just wipe the
whole RX FIFO, instead of trying to read it byte-by-byte
we can mount a zipfile in nuttx use mount command like this:
mount -t zipfs -o /data/test.zip /zip
The zipfs is a read only file system,The advantage is that it
does not occupy additional space when reading the decompressed file.
When used, reading and decompression operations are simultaneous.
The known disadvantage is that when using seek to read forward,
it will reopen and cause slow speed problems.
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Allows setting the advertised route lifetime, and also to set
it to 0 for advertising only the prefix.
From RFC4861:
A router might want to send Router Advertisements without advertising
itself as a default router. For instance, a router might advertise
prefixes for stateless address autoconfiguration while not wishing to
forward packets. Such a router sets the Router Lifetime field in
outgoing advertisements to zero.
