Gregory Nutt
|
e8738e1f55
|
Minor update to some comments.
|
2017-08-04 09:00:58 -06:00 |
|
Gregory Nutt
|
bbc06dcd8e
|
RAMTRON: Should be able to select chunked write mode via a configuration option, not by editing the file.
|
2017-08-04 08:49:07 -06:00 |
|
Boris Astardzhiev
|
79ee0a5209
|
RAMTRON: Add support for splitting block writes in chunks. Some Re-RAMs like MB85AS4MT has a write buffer size limitation.
|
2017-08-04 08:12:59 -06:00 |
|
Jussi Kivilinna
|
9fc5f44ef6
|
syslog: CONFIG_CLOCK_MONOTONIC
|
2017-08-04 08:02:52 -06:00 |
|
Juha Niskanen
|
0113b0db95
|
drivers: handle I2C_TRANSFER return value consistently. Some I2C peripherals transfers return zero on success, others number of completed transfers. Make drivers robust against this.
|
2017-08-04 07:31:36 -06:00 |
|
Gregory Nutt
|
4cc13f8d94
|
Simulator: x86 stack needs to be aligned to 16-byte boundaries.
|
2017-08-04 07:03:39 -06:00 |
|
Gregory Nutt
|
36e7a18181
|
spirit: Modify reg needs to toggle CS to get the correct status. Remove some delbug left in last commit. make sprit_unlock an inline function.
|
2017-08-03 15:15:15 -06:00 |
|
Gregory Nutt
|
d2b5078e01
|
Spirit: Mostly cosmetic fixes to names and comments. Tx timeout should run on the HP work queue.
|
2017-08-03 11:47:38 -06:00 |
|
Gregory Nutt
|
76c9ef4844
|
Spirit: Fix a few RX-related issues.
|
2017-08-03 11:08:33 -06:00 |
|
Jussi Kivilinna
|
81b5118727
|
mm_mallinfo: do heap end debug assert check with heap semaphore held
|
2017-08-03 10:01:26 -06:00 |
|
Jussi Kivilinna
|
027a446158
|
poll: fix poll for regular files and block devices. Open Group documentation tells that poll (and select) support regular files and that 'Regular files shall always poll TRUE for reading and writing'.
|
2017-08-03 09:58:20 -06:00 |
|
Gregory Nutt
|
b3e788e11b
|
Spirit: Fix typos in conditional compilation. Add debug output. Remove extra clear of pending interrupts, could cause missing interrupts. Add spirit_reg_modify() which is not currently used.
|
2017-08-03 09:55:30 -06:00 |
|
Gregory Nutt
|
8a785c4b66
|
Spirit Network Device: Fix a deadlock. Also several other design improvements to eliminate corner cases.
|
2017-08-03 08:37:05 -06:00 |
|
Gregory Nutt
|
d5e7ebed02
|
configs/stm32f746g-disco: Remove inclusion of STm32-specifiy header files from board.h
|
2017-08-02 17:34:29 -06:00 |
|
Ivan Ucherdzhiev
|
e0fd3a2d11
|
Fix for stm32f746g-disco board for button support with interrupt. This change is tested with buttons app example and it is working with interrupts (signals). I tried the test with polling but at this point it doesn't work.
|
2017-08-02 17:28:55 -06:00 |
|
Gregory Nutt
|
1029f06321
|
b-l475e-iot01a: crude update to +CONFIG_BOARD_LOOPSPERMSEC. Not precise.
|
2017-08-02 17:11:24 -06:00 |
|
Gregory Nutt
|
fecc12df38
|
Update a README
|
2017-08-02 14:34:24 -06:00 |
|
Gregory Nutt
|
0579825b69
|
Fix some errors in IOCTL decoding macros
|
2017-08-02 14:28:17 -06:00 |
|
Gregory Nutt
|
1ae9748170
|
Networking: Add support for some packet radio IOCTL commands; Spirit: Fix a few bugs from testing.
|
2017-08-02 11:53:03 -06:00 |
|
Gregory Nutt
|
42b3ee4cfc
|
Fix a few errors that crept in with my review changes.
|
2017-08-02 09:19:29 -06:00 |
|
Gregory Nutt
|
0960b50f3f
|
Changes from review of 6f94e4e9e7
|
2017-08-02 08:36:17 -06:00 |
|
Gregory Nutt
|
5f2d4b8f84
|
Changes from review of commit e851a24329
|
2017-08-02 08:26:08 -06:00 |
|
Gregory Nutt
|
a6fa3b311d
|
b-l475e-iot91a: Add apps/examples/nettest and eamples/udp to Spirit1 configuration. Add telnet support. fix driver statistics configuration.
|
2017-08-02 07:01:42 -06:00 |
|
Masayuki Ishikawa
|
0a05f3a492
|
Merged in masayuki2009/nuttx.nuttx/lc823450 (pull request #450)
lc823450 support
Approved-by: Gregory Nutt <gnutt@nuttx.org>
|
2017-08-02 12:48:09 +00:00 |
|
Masayuki Ishikawa
|
6f94e4e9e7
|
configs/lc823450-xgevk: LC823450-XGEVK board support
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
|
2017-08-02 21:10:15 +09:00 |
|
Masayuki Ishikawa
|
e851a24329
|
arch/arm/src/lc823450: Initial support for ON Semiconductor LC823450
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
|
2017-08-02 21:09:43 +09:00 |
|
Gregory Nutt
|
fee6653cb4
|
network procfs: Fix so that PktRadio address are shown correctly
|
2017-08-01 17:21:13 -06:00 |
|
Gregory Nutt
|
1275c3e249
|
Spirit: Network driver needs to setup IP address based on configured node address. If no node address is provided, then it will use a default. Also upate a README.
|
2017-08-01 16:33:34 -06:00 |
|
Gregory Nutt
|
735095d040
|
Spiri: Fixe some typos. One is critical since it is conditional compilation.
|
2017-08-01 15:18:40 -06:00 |
|
Gregory Nutt
|
09bb6ff16b
|
Spirit: Add more debug output. Make sure device is in READY state after reset and before changing to STANDBY.
|
2017-08-01 13:48:59 -06:00 |
|
Gregory Nutt
|
ceca6c69a8
|
Spirit: Add a function to wait for a state change with a timeout.
|
2017-08-01 10:31:12 -06:00 |
|
Gregory Nutt
|
bd027b9019
|
serial.c: Use common TX drain logic when closing a driver as with the TCDRAIN IOCTL.
|
2017-08-01 10:14:24 -06:00 |
|
Titus von Boxberg
|
b7b3876e8f
|
Merged in elbeinformatik/nuttx/NX-PR (pull request #449)
NX PR
Approved-by: Gregory Nutt <gnutt@nuttx.org>
|
2017-08-01 15:02:14 +00:00 |
|
Gregory Nutt
|
2cb5ec542b
|
Spirit: Fix a bad debug assertion.
|
2017-08-01 09:01:46 -06:00 |
|
Titus von Boxberg
|
55e9c8990c
|
stm32_rcc: code style
|
2017-08-01 16:25:19 +02:00 |
|
Titus von Boxberg
|
a4e97d5daf
|
Added functions for DSI clock source selection
|
2017-08-01 16:24:48 +02:00 |
|
Gregory Nutt
|
4f0238339e
|
serial.c: Finish implementation of TCDRAIN. Based partly on logic from Sebastien Lorquet.
|
2017-08-01 07:39:08 -06:00 |
|
Gregory Nutt
|
2c504003f3
|
stm32f746g-disco: Make the initialization logic identical to the standard way that is done for all other board.
|
2017-08-01 07:02:29 -06:00 |
|
Ivan Ucherdzhiev
|
a9e4e02c81
|
Fixes for compilation of stm32f746g-disco
|
2017-08-01 06:50:53 -06:00 |
|
Sebastien Lorquet
|
e22912db37
|
drivers/serial/serial.c: Add support for TCFLUSH
|
2017-08-01 06:30:52 -06:00 |
|
Gregory Nutt
|
05ea22e9ab
|
STM32F7: Fix for coding standard violations that came in with cd3ca1140e -- missed a file last time
|
2017-07-31 18:36:38 -06:00 |
|
Gregory Nutt
|
5f4fdb42be
|
STM32F7: Fix for coding standard violations that came in with cd3ca1140e
|
2017-07-31 18:35:37 -06:00 |
|
Gregory Nutt
|
959f2042a4
|
IoT Board/Spirit: Fix a few issues that interfered with testing. Move console to the VCOM port (USART) for all configurations. Rename the spirit-mac configuration to spirit-6lowpan. Add lots of debug output the spirit network driver.
|
2017-07-31 18:26:17 -06:00 |
|
Titus von Boxberg
|
cd3ca1140e
|
Merged in elbeinformatik/nuttx/NX-PR (pull request #448)
Bug fixes for STM32F769
Approved-by: Gregory Nutt <gnutt@nuttx.org>
|
2017-08-01 00:22:37 +00:00 |
|
Titus von Boxberg
|
604a6dc0fa
|
improved help text
|
2017-08-01 01:23:28 +02:00 |
|
Titus von Boxberg
|
bdee01f492
|
added function for reset
|
2017-08-01 01:23:28 +02:00 |
|
Titus von Boxberg
|
0947b31fbb
|
STM32_RCC_DCKCFGR2 has nothing to do with PLLI2S; PLLI2S is not dependent on LTDC, instead on SAICLK1/2 generated from PLLI2S
|
2017-08-01 01:23:28 +02:00 |
|
Titus von Boxberg
|
9d56dbb403
|
comment corrected
|
2017-08-01 01:23:28 +02:00 |
|
Titus von Boxberg
|
63bce1fc34
|
no board specific dithering values used; corrected comment; corrected dithering init
|
2017-08-01 01:23:28 +02:00 |
|
Titus von Boxberg
|
ec95720d13
|
corrected LIPOS/LIPCR calculation
|
2017-08-01 01:23:28 +02:00 |
|