Create the nuttx.asm in the disassembly format using the objdump program.
NOTE:
'>', objdump doesn't take arguments for output file,
but result is printed to standard out, and is redirected.
Signed-off-by: fanjiangang <fanjiangang@lixiang.com>
Signed-off-by: chao an <anchao@lixiang.com>
Pass CP15_CACHE_INVALIDATE argument with r1 register to cp15_dcache_op_level.
cache level is 0(L1 D-Cache) with r0 register.
prototype:
void cp15_dcache_op_level(uint32_t level, int op)
Signed-off-by: Jinliang Li <lijinliang1@lixiang.com>
stdint.h is needed in uart_16550.h for some types, e.g. uint32_t,
uintptr_t. Otherwise there will be building issue unless that stdint.h
is added before uart_16550.h by all files which needs uart_16550.h.
Signed-off-by: Jinliang Li <lijinliang1@lixiang.com>
warning C5101: use of preprocessor directive in function-like macro argument list is undefined behavior
Co-authored-by: chenxiaoyi <chenxiaoyi@xiaomi.com>
Co-authored-by: xuxin19 <xuxin19@xiaomi.com>
for sources that have implemented multiple prog_main,
there is a situation where you don't need to add source files but need to register.
the add_application method is enhanced so that it can be registered without entering SRCS.
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
the Unix-specific commands used in the CMake implementation of savedefconfig are not
supported on the Windows platform, which will cause compatibility issues.
replace it with CMake implementation, which can be cross-platform and has been verified on Windows.
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
"/mnt/yang/qixinwei_vela_warnings/nuttx/include/nuttx/spinlock.h", line 252: warning #76-D:
argument to macro is empty
SP_DSB();
^
"/mnt/yang/qixinwei_vela_warnings/nuttx/include/nuttx/spinlock.h", line 261: warning #76-D:
argument to macro is empty
SP_DMB();
^
"/mnt/yang/qixinwei_vela_warnings/nuttx/include/nuttx/spinlock.h", line 252: warning #76-D:
argument to macro is empty
SP_DSB();
^
"/mnt/yang/qixinwei_vela_warnings/nuttx/include/nuttx/spinlock.h", line 261: warning #76-D:
argument to macro is empty
SP_DMB();
^
"/mnt/yang/qixinwei_vela_warnings/nuttx/include/nuttx/spinlock.h", line 296: warning #76-D:
argument to macro is empty
SP_DSB();
^
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
according to armv6-m/armv7-m arch reference manual:
the three ISB {<opt>}, DSB {<opt>}, DMB {<opt>} instructions <opt>
field are defined as:
Specifies an optional limitation on the ISB/DSB/DMB operation. Allowered
values are:
Full system ISB/DSB/DMB operation, encoded as option=='1111'. Can be
omitted.
All other encodings of the options are RESERVED.
the "#opt" field of "isb #opt"
So we could remove the options field in Armv7-m platform.
The following are the build error with greenhills compiler:
CC: common/arm_exit.c [asarm] (error #2071) /tmp/gh_001h70j1.si 92: bad parameter
isb 15
------^
[asarm] (error #2071) /tmp/gh_001h70j1.si 112: bad parameter
isb 15
------^
[asarm] (error) errors during processing
According to armv8-m arch reference manual:
the ISB/DMB instruction's "opt" encoding rule is same as
armv6-m/armv7-m, but the "DSB" instruction is different, in armv8-m, the
"DSB {<opt>}" field has two valid encoding options: 0b0000, 0b0100.
and all other encoding options are reserved.
In Armv7-a/Armv8-a, the dsb/dmb option field has 8 valid state value.
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
The following are the compile error that reported
by GreenHills compiler:
"/mnt/yang/qixinwei_commit/nuttx/include/arch/syscall.h", line 156 (col. 17): error #2036-D:
cannot allocate "reg0" to specified caller-saved register
"/mnt/yang/qixinwei_commit/nuttx/include/arch/syscall.h", line 157 (col. 17): error #2036-D:
cannot allocate "reg1" to specified caller-saved register
Then we fix this greenhills compilation error by explicitly specifying
the registers in the clobber list in the inline assembly code.
This fix is successful in compiling on the
nuttx/boards/arm/mps/mps2-an500/configs/nsh platform and passes
the ostest test.
However, if we keep the implementation the same for both the default
and Greenhills compilers, the default compiler will report the
following two issues:
1. the "sys_call6" function will report compile error when
compiling on "./vendor/qemu/boards/smartspeaker/configs/smartspeaker-knsh"
platform, the detailed error info:
CC: proxies/PROXY_mq_getattr.c In file included from /home/guoshichao/work_profile/vela_os/vela_qemu_1/nuttx/include/sys/syscall.h:35,
from /home/guoshichao/work_profile/vela_os/vela_qemu_1/nuttx/include/syscall.h:30,
from proxies/PROXY_mmap.c:5:
In function 'sys_call6',
inlined from 'mmap' at proxies/PROXY_mmap.c:9:22:
/home/guoshichao/work_profile/vela_os/vela_qemu_1/nuttx/include/arch/syscall.h:297:3: error: 'asm' operand has impossible constraints
297 | __asm__ __volatile__
| ^~~~~~~
2. when running on qemu-armv7-a platform, the modification to
"smh_call()" function will make the system fail to boot up, so
we need to keep the default compiler implementation and greenhills
compiler implementation separate
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
(cherry picked from commit cb48b749b1c9cad8cfb96bff7c5e9b6ebf20fc8a)
Some multicore RV chips (mpfs, jh7110 etc) have hart clusters
and globally numbered mhartids. Clusters with single hart or
SMP support can be managed by one NuttX instance. Currently
NuttX expects to use cluster-local ids.
This allows us to get local ids by offsetting mhartids with a
base value.
Note that there are chips (e.g. k230) that use cluster-local
ids directly, so this is not needed for them.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This reverts both 2afdcfb6a6 and 0a0af89de9 to restore the 128K kflash
design as the implementation depends on that to work, checked with:
```
$ qemu-system-arm -M lm3s6965evb -nographic -device \
loader,file=nuttx.bin,addr=0x0 -device \
loader,file=nuttx_user.bin,addr=0x2000
```
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
