Alan Carvalho de Assis
803aadd5b7
Various initialization functions in configs/: Change /dev/slcd to /dev/slcd0 for consistency
2018-11-25 14:00:20 -06:00
Gregory Nutt
c790450ba2
Remove CONFIG_ARCH_CALIBRATION. It is awkward to use and no longer necessary now that we have apps/examples/calib_udelay.
2018-08-19 10:06:36 -06:00
Gregory Nutt
e4922ed9f0
Remove instructures to CD to tools/ before running ./configure.sh
...
Squashed commit of the following:
configs/*/README.txt: Replace each occurrence of './configure.sh' with 'tools/configure.sh'
configs/*/README.txt: Remove 'cd ..' after each './configure.sh'
configs/*/README.txt: Remove 'cd -' after each './configure.sh'
configs/*/README.txt: Remove 'cd tools' before each './configure.sh'
configs/README.txt: Remove instruction to CD tools/ before running configure.sh.
2018-05-09 11:41:46 -06:00
Gregory Nutt
c867d42018
arch/arm/src/lpc54xx: Add support for card detect and write protect to SDMMC driver. configs/lpcxpresso-lpc54628: Add logic to bring up SDMMC.
2017-12-20 10:52:05 -06:00
Gregory Nutt
43a221f308
configs: Remove some old, redundant, obsolete boilerplate regarding toolchains that has been cloned into most of the board README files.
2017-11-26 11:36:03 -06:00
Gregory Nutt
413cfdfa75
Update some README files.
2017-10-15 16:15:05 -06:00
Gregory Nutt
9aac1dd44d
configs: Remove all setenv.bat files. Remove all references to setenv.sh and setenv.bat from all config README files.
2017-04-26 10:12:13 -06:00
Gregory Nutt
9ec104834a
Remove CONFIG_USARTn_ISUART
2016-05-25 11:21:48 -06:00
Gregory Nutt
3e0efd7279
Fix all URLs to the NuttX repository
2016-04-06 17:56:40 -06:00
Gregory Nutt
de50bc82a7
Remove CONFIG_SPI_OWNBUS: Now it is not just a good idea, it is the law
2016-01-23 18:21:36 -06:00
Gregory Nutt
e46cd30c14
Change use of mknulldeps.sh to mkwindeps.sh
2016-01-09 14:13:44 -06:00
Gregory Nutt
9e99cfa4e0
Correct many bitbucket.org URLs
2015-06-28 09:14:52 -06:00
Gregory Nutt
7214e52fb2
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
2015-06-28 08:08:57 -06:00
Gregory Nutt
46bd0bc307
This cleans up most of the remaining SourceForge references
2015-06-26 18:13:20 -06:00
Gregory Nutt
51950d7850
Undefine IRQPRIO in all configurations it should not be set
2014-04-16 08:29:39 -06:00
Gregory Nutt
0cefef9cb5
Documentatin updated; fix errors in some comments
2014-03-28 09:52:07 -06:00
Gregory Nutt
2ba8224cdc
SAM3/4: Rename CONFIG_GPIO*_IRQ to CONFIG_SAM34_GPIO*_IRQ in all board-related files
2014-03-23 15:48:10 -06:00
Gregory Nutt
58eed436e9
Removed almost all ostest configurations
2014-02-28 19:19:11 -06:00
Gregory Nutt
23ac55e302
Add configuration for the SAMD20 Xplained Pro board. Initial check a low-effor, unverified clone of thoe SAM4L Xplained Pro board configuration
2014-02-12 17:21:28 -06:00
Gregory Nutt
efded598fd
Finally... renamed all CONFIG_DRAM_ settings to CONFIG_RAM_
2013-07-26 10:09:17 -06:00
Gregory Nutt
381c8c2509
Basic framework to support the AT91SAMA5D3 family and the SAMA5D3x-EK board(s) in particular
2013-07-19 15:23:03 -06:00
Gregory Nutt
288adb2f5a
Add peripheral configuration logic for the SAM3X/3A; Change all references to SAM3/4 SPI to SPI0 for compatibity with the SAM3X/3A which has SPI0 and SPI1; Add directory which will eventually holdl an Arduino Due port
2013-06-26 18:46:44 -06:00
Gregory Nutt
179bae1aee
Add support for a separate CCM memory allocator for members of the STM32 family that support CCM memory
2013-06-25 09:13:30 -06:00
Gregory Nutt
841f149a3d
Fix UG-2832HSWEG04 landscape. Add reverse landscape support to UG_2864AMBAG01 and UG-9964HSWAG01. Fixe NXHELLO default colors for 1-bit mono modes
2013-06-24 12:37:02 -06:00
Gregory Nutt
581e409c37
Add support for the UG-2843HHSWEG04 OLED and for the SAM4L Xplained Pro OLED module that uses that OLED.
2013-06-23 14:39:56 -06:00
Gregory Nutt
d235cf8b8a
SAM4L Xplained SLCD driver is complete
2013-06-23 09:05:20 -06:00
Gregory Nutt
ba516dcc32
Beginning debug of SAM4L Xplained SLCD
2013-06-22 17:01:44 -06:00
Gregory Nutt
d2a3bb145b
The SAM4L Xplained Pro SLCD driver is code complete but untested
2013-06-22 10:39:25 -06:00
Gregory Nutt
35840871b4
Fix test of NULL pointer in the SAM3/4 SPI driver
2013-06-18 12:16:52 -06:00
Gregory Nutt
a2db1035dc
SAM3/4 SPI phase control (CPHA) is inverted
2013-06-18 09:29:55 -06:00
Gregory Nutt
7a9d4058f5
MMC/SD driver needs to manage SPI mode and data width as well
2013-06-17 12:31:24 -06:00
Gregory Nutt
28a7c22757
Re-architected SAM3/4 SPI interface; Change BUSY bit handling in the ADS7843E driver
2013-06-16 10:09:21 -06:00
Gregory Nutt
6f24ea780b
SAM MMCSD/SPI related changes
2013-06-15 17:00:52 -06:00
Gregory Nutt
0112ad14ba
Add support for the SAM4L Xplained Pro I/O1 module
2013-06-15 10:56:08 -06:00
Gregory Nutt
30ecf0ca43
Fixes for SAM4S and 4L due to recent changes to SAM3S; Updated README files
2013-06-14 08:54:24 -06:00
Gregory Nutt
9ab85d01ef
Remove CONFIG_XYZ_BUILTIN configurations, replace with the single CONFIG_NSH_BUILTIN_APPS. Add SAM3/4 sam_periphclks.h which is just a header file that includes the right header file. Misc SAM3U-EK cleanup
2013-06-12 17:32:00 -06:00
Gregory Nutt
5e192c767b
SAM4S: GPIO, chip characteristics, peripheral Kconfig
2013-06-11 12:28:31 -06:00
Gregory Nutt
8aee2ce8c9
Add a directory to hold configurations for the SAM4S Xplained board
2013-06-10 18:20:30 -06:00
Gregory Nutt
2896bc7c99
SAM4L: Add an NSH configuration and C++ support
2013-06-09 11:43:20 -06:00
Gregory Nutt
d9dffb2c2b
SAM4L: Mic fixes to get the SAM4L Xplained running. The ostest now passes.
2013-06-09 10:57:42 -06:00
Gregory Nutt
63c8b4353e
SAM4L: Add logic to enable selected peripherals on power up; Extend configuration so that each peripheral can be selected -- even though the drivers are not yet implemented
2013-06-07 14:59:33 -06:00
Gregory Nutt
0cb54ca565
SAM4L alternate pin mapping header file; Use USART1 for virtual COM port console
2013-06-03 17:53:05 -06:00
Gregory Nutt
936c435d2e
Add a skeleton configuration that will eventually support the SAM4L Xplained Pro board
2013-06-03 15:11:56 -06:00
