Gregory Nutt
895f01dd80
Merged in david_s5/nuttx/upstream_revert_265af481209d60033f7cd4c4216048b1ce3eb435 (pull request #194 )
...
Revert "STM32 serial: Make input hardware flow-control work with RX DMA. From Jussi Kivilinna"
2017-01-12 17:58:20 -06:00
Gregory Nutt
bd696b8c40
Merged in david_s5/nuttx/upstream_to_greg_HSI_ON_re (pull request #193 )
...
HSI should not be turned off
2017-01-12 17:47:16 -06:00
David Sidrane
20e723715c
HSI should not be turned off
2017-01-12 13:44:03 -10:00
Gregory Nutt
d5cdab0e51
Revert "HSI should not be turned off"
...
This reverts commit 4e051c05fb
2017-01-12 16:27:04 -06:00
Gregory Nutt
3191549116
Merged in david_s5/nuttx/upstream_to_greg_HSI_ON (pull request #191 )
...
HSI should not be turned off
2017-01-11 17:14:14 -06:00
Gregory Nutt
62fe2bf11a
Merged in david_s5/nuttx/upstream_to_greg_HSI_not_req_on_F4 (pull request #192 )
...
STM32F4 does not have the requierment that the HSI be on for FLASH erase/write operations
2017-01-11 17:13:36 -06:00
David Sidrane
0dbf44e3ad
STM32F4 does not have the requierment that the HSI be on for FLASH erace/write operations
2017-01-11 12:47:24 -10:00
David Sidrane
4e051c05fb
HSI should not be turned off
2017-01-11 12:18:12 -10:00
Gregory Nutt
b9e2bd4f37
Merge branch 'master' of bitbucket.org:nuttx/nuttx
2016-12-31 12:25:20 -06:00
Gregory Nutt
17cbec16dc
STM32 SDIO: Remove warning about unused variable in STM32 F4 builds.
2016-12-31 12:24:02 -06:00
Aleksandr Vyhovanec
a0814ece13
Fix typos
2016-12-30 09:49:31 +03:00
Gregory Nutt
ea7b673174
Merged in david_s5/nuttx/upstream_sdio_1bit_dma (pull request #188 )
...
Allow dma in 1 bit mode in STM32F4xxx
2016-12-24 20:21:03 -06:00
David Sidrane
df9ae3c13f
Revert "STM32 serial: Make input hardware flow-control work with RX DMA. From Jussi Kivilinna"
...
This reverts commit 265af48120
2016-12-23 14:12:57 -10:00
David Sidrane
76ceb37553
Allow dma in 1 bit mode in STM32F4xxx
2016-12-22 09:19:37 -10:00
David Sidrane
ec85425041
STM32: Fix some STM32F7 copy paste errors
2016-12-17 08:31:12 -06:00
Gregory Nutt
4795d58e03
Back out most of 46dbbe837e. The order is correct -- or, rather, the order is the same as the order that response data is provided. Change the order will break all other drivers.
2016-12-15 07:16:24 -06:00
Gregory Nutt
c83da3c48f
Remove minnsh configurations and support logic: up_getc() and lowinstream.
...
This was an interesting exercise to see just how small you could get NuttX, but otherwise it was not useful: (1) the NSH code violated the OS interface layer by callup up_getc and up_putc directly, and (2) while waiting for character input, NSH would call up_getc() which would hog all of the CPU. NOt a reasonably solution other than as a proof of concept.
2016-12-13 18:01:23 -06:00
David Sidrane
64ae731c99
stm32_allocateheap.c edited online with Bitbucket
2016-12-09 16:35:35 +00:00
David Sidrane
df9c5b33a0
Added STM32F469 RAM size and deliberated STM32F446 size
2016-12-09 05:02:31 -10:00
David Sidrane
dd309ad9e8
I was wrong - the original commit was correct. Assume a write op on the last word: address of 0xxxxxfe and count of 2. It is a valid operation and address+count is == STM32_FLASH_SIZE - so that is OK
2016-12-08 21:14:31 +00:00
David Sidrane
c77bda47d7
BUGFIX:STM32F427 was rebooting. Over reached family.
2016-12-08 20:31:56 +00:00
Gregory Nutt
b9be0279b1
Coding standard requires a blank line after every comment.
2016-12-07 06:52:15 -06:00
Gregory Nutt
cae56b825b
Merged in david_s5/nuttx/upstream_to_greg_SDIO_fix (pull request #177 )
...
Allow a config to override the SDIO clock edge setting
2016-12-07 12:48:11 +00:00
David Sidrane
7cc0a06f44
STM32: Allow the config to override the clock edge setting
2016-12-06 13:30:07 -10:00
Gregory Nutt
e190e1ee5b
stm32fxxxxx_otgfs.h edited online with Bitbucket
2016-12-06 15:58:05 +00:00
Gregory Nutt
8e447453e1
Add a missing bit field definitions that was lost when stm32_otgfs.h was deleted.
2016-12-06 09:22:03 -06:00
Gregory Nutt
d6437407b1
Fix broken build. Previous commit removed a file that was being used.
2016-12-06 09:03:00 -06:00
Gregory Nutt
b6a21edb42
Merged in david_s5/nuttx/upstream_to_greg (pull request #176 )
...
Upstream to greg
2016-12-06 12:22:42 +00:00
David Sidrane
885b718552
Expanded otgfs support to stm32F469 and stm32f446
...
Added missing bits definitions
Used stm32F469 and stm32f446 bit definitions
Removed unsed header file
2016-12-05 18:07:57 -10:00
David Sidrane
50f36f8967
Added support for stmf469 SAI and I2S PLL configuration and STM446 fixes
2016-12-05 14:21:46 -10:00
David Sidrane
8b31eda4d8
Added Timers 2-5 and control of SAI and I2S PLLs
2016-12-05 14:19:56 -10:00
Gregory Nutt
7467329a98
Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed.
2016-12-03 16:28:19 -06:00
Janne Rosberg
a03d26e88d
stm32_otghshost: if STM32F446 increase number of channels to 16
2016-11-30 12:17:12 -06:00
Gregory Nutt
934aded293
arch/: Adapt all Ethernet drivers to work as though CONFIG_NET_MULTIBUFFER were set. Remove all references to CONFIG_NET_MULTIBUFFER
2016-11-29 16:06:48 -06:00
Marc Rechté
3f91bd6056
STM32 DAC: Fix shift value whenever there are is a DAC2 and, hence, up to three interfaces.
2016-11-29 07:03:54 -06:00
Maciej Wójcik
0d0b1b64e2
Fix for F1 RTC Clock, tested on F103
2016-11-25 06:17:18 +01:00
Gregory Nutt
0804286ad3
arch/: Add option to use low-priority work queue to all Ethernet drivers in arch that support CONFIG_NET_NOINTS.
2016-11-19 09:20:01 -06:00
Paul A. Patience
8d9804d57b
STM32: STM32F303xB and STM32F303xC chips have 4 ADCs
2016-11-18 19:28:09 -05:00
Gregory Nutt
19c1c9d78b
All timer lower half drivers. Port Sebastien's changes to all all other implementations of the timer lower half. Very many just and untested. Expect some problems.
2016-11-17 15:03:31 -06:00
Marc Rechté
eb9a8ed790
STM37xx PWM: Add PWM driver support for STMF37xx. The changes have been tested successfuly for TIM4 and TIM17 (different IPs).
2016-11-07 09:35:48 -06:00
Gregory Nutt
8bd8ab1a45
configs/nucleo_f303re: Various fixes to get the adc configuration building again after PR. Refresh all configurations.
2016-11-04 06:59:28 -06:00
Gregory Nutt
0a5b4f684a
arch: Disable priority inheritance on all semaphores used for signaling in the rest of the MCU drivers
2016-11-03 17:38:26 -06:00
Gregory Nutt
d28181da10
arch: Disable priority inheritance on all semaphores used for signaling in all USB host drivers
2016-11-03 17:05:53 -06:00
Gregory Nutt
bb6bfa633e
arch: Disable priority inheritance on all semaphores used for signaling in all SD card drivers
2016-11-03 15:13:27 -06:00
Gregory Nutt
8b07aa6f7c
arch: Disable priority inheritance on all semaphores used for signaling in all SPI drivers
2016-11-03 14:51:44 -06:00
Gregory Nutt
e1cd9febbf
arch: Disable priority inheritance on all semaphores used for signaling in all I2C/TWI drivers
2016-11-03 14:23:42 -06:00
Paul A. Patience
93e9387689
STM32 ADC: Fix compilation error when DMA isn't enabled
2016-11-02 12:52:19 -04:00
David Sidrane
d870f4ab29
I think, that Size is (highest address+1 - Base address)
...
Base address has been removed and if address+count >= size we are outside of the Flash
2016-11-01 22:27:35 +00:00
Aleksandr Vyhovanec
2bb15fe789
Minor changes
2016-11-01 23:48:44 +03:00
Aleksandr Vyhovanec
20a1642552
To write the last page
2016-11-01 23:34:30 +03:00
