sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
32,519 Commits 1 Branch 0 Tags 291 MiB
898fdbded0
Commit Graph

49 Commits

Author SHA1 Message Date
Gregory Nutt
e4922ed9f0 Remove instructures to CD to tools/ before running ./configure.sh 
Squashed commit of the following:

    configs/*/README.txt: Replace each occurrence of './configure.sh' with 'tools/configure.sh'
    configs/*/README.txt:  Remove 'cd ..' after each './configure.sh'
    configs/*/README.txt:  Remove 'cd -' after each './configure.sh'
    configs/*/README.txt:  Remove 'cd tools' before each './configure.sh'
    configs/README.txt:  Remove instruction to CD tools/ before running configure.sh.
 2018-05-09 11:41:46 -06:00
Anthony Merlino
046a94e363 Merged in merlin17/nuttx (pull request #485) 
drivers/xbee: Fixes a few warnings

* drivers/xbee: Fixes a few warnings

* configs/clicker2-stm32: Updates sections about i8sak usage in the README

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-09-15 19:41:24 +00:00
Gregory Nutt
88a87f8e3f 6LoWPAN: The original, Contiki-based design used only a single buffer for reassemblying larger packets. This could be a problem issue for hub configurations which really need the capability concurrently reassemble multiple incoming streams concurrently. These was also a design issue in that the reassembly buffer could be corrupted by outgoing packets. The design was extended to support multiple reassembly buffers, each associated with the reassembly tag and source address. This assures that there can be be no corruption of the reassembly once it has started. 2017-08-26 10:00:47 -06:00
Gregory Nutt
a668806b94 Update some README files; Plus minor simplification to a preceding change. 2017-08-24 06:44:35 -06:00
Gregory Nutt
873de7b480 configs/*/README.txt: Update to the new URL for obtaining the ARM toolchain. 2017-08-13 07:18:19 -06:00
Gregory Nutt
2947ca06c9 Avoid some harsh, inappropriate DEBUGASSERT's. 2017-08-05 12:32:31 -06:00
Gregory Nutt
c2fbef2062 b-l475e-iot01a: Add configurations to support a star topology. 2017-08-05 07:53:55 -06:00
Gregory Nutt
ae1771454a 6LoWPAN: TCP send logic was returning a failure in one case when, in fact, the send was successful. 2017-06-30 16:07:51 -06:00
Gregory Nutt
af8c5c86f3 6LowPan: Change how the destination node address is handled in the start endpoint configuration. When the star endpoint sent the IPv6 destination address, the HC06 compression logic elided the address -- meaning that it could be reconstructed by the recipient based on the receiver's assigned short address. However, when intercepted by the hub, the uncompressed address does not know the short address of the recipient and instead uses the short address of the hub. This means two things: (1) it looks like the hub address is the destination address, and (2) the uncompressed UDP packet has a bad checksum. This change assures that the destination IPv6 address is not elided in the case of the star endpoint configuration. 2017-06-30 09:32:17 -06:00
Gregory Nutt
ad3ea72ff5 Update a README; refresh some configurations. 2017-06-29 10:55:01 -06:00
Gregory Nutt
6d8df90b79 Clicker2-STM32 + net/: Add configurations to support the endpoint and hub roles in a star topology. Fix various things that broke when IPv6 forwarding was enabled. 2017-06-29 08:16:46 -06:00
Gregory Nutt
76644b6ead Update a README. 2017-06-27 09:53:55 -06:00
Gregory Nutt
70cefcf551 Clicker2-STM32: Add support for the Telnet client to the mrf24j40-6lowpan configuration. Useless at the moment because the NuttX telnet daemon does not yet support IPv6. 2017-06-27 07:44:41 -06:00
Gregory Nutt
8cb4636bb1 Update README 2017-06-26 11:54:43 -06:00
Gregory Nutt
aa1708e7c0 6LoWPAN: Update README; fix duplicate and bad memcpy in loopback driver. 2017-06-26 10:53:57 -06:00
Gregory Nutt
249ab6eb18 6LoWPAN: Eliminate a global variable. 2017-06-26 10:49:02 -06:00
Gregory Nutt
5a8668b362 6LoWPAN TCP: Fix more ACK handling, fix some callback flag settings. Now the TCP test appears fully functional on 6LoWPAN. 2017-06-25 13:00:42 -06:00
Gregory Nutt
ff08f799ca IEEE802.15.4: Update RX statistics in network driver. Update README files. 2017-06-25 11:18:27 -06:00
Gregory Nutt
74c97f7e7f 6LoWPAN: Various fixes for a clean build if either TCP or UDP are disabled. Given the current state of TCP, it is recommended that you disable TCP. 2017-06-24 16:53:00 -06:00
Gregory Nutt
96af668ab8 6LoWPAN: Handle case where the local address is zero (listen socket) 2017-06-24 11:57:59 -06:00
Gregory Nutt
f0cdb0e6b4 clicker2-stm32/mrg24j40-6lowpan: Add apps/examples/nettest. Refresh all configurations that enable the nettest. 2017-06-23 18:11:15 -06:00
Gregory Nutt
328a464f99 6LoWPAN: Fix a typo in an index that prevented use with HC1 and extended addresses. 2017-06-23 10:08:03 -06:00
Gregory Nutt
1a46ea644d 6LoWPAN: Add missing IPv6 address creation to HC1 decode logic. 2017-06-23 09:45:09 -06:00
Gregory Nutt
4a517ad48d 6LoWPAN: Just adds more debug output 2017-06-22 15:19:18 -06:00
Gregory Nutt
b49c52226e Update README 2017-06-21 18:05:36 -06:00
Gregory Nutt
d9f549121c ieee802154_req_data: Don't modify the IOB until we are certain that no EINTR errors will occur. Otherwise, the retry will fail 2017-06-20 14:27:22 -06:00
Gregory Nutt
a82ab4b729 mac802154_req_data() can return without releasing the exclsem 2017-06-20 11:23:31 -06:00
Gregory Nutt
68a2b84277 Update a README 2017-06-19 16:01:35 -06:00
Gregory Nutt
c5ae864624 /configs/clicker2-stm32/mrf24j40-6lowpan: Enables both client and server UDP tests on the target; Update a README file. 2017-06-19 13:28:48 -06:00
Gregory Nutt
cfea8adacb L should be capitalized in 6LoWPAN 2017-06-18 16:00:08 -06:00
Gregory Nutt
84a75996fb IEEE 802.15.4 Network Driver: Add logic to setup the network mask, update the MAC-based IPv6 addressing when the network is brought up. The idea is that addressing changes are supposed to occur only while the network is down but won't take effect until the network is up again. 2017-06-18 15:26:56 -06:00
Gregory Nutt
4588226d71 Clicker2-STM32: Enable networking and 6loWPAN in the mrf24j40-6lowpan configuration. Fix a couple of new 6loWPAN compile issues revealed by this new configuration. 2017-06-16 16:47:27 -06:00
Gregory Nutt
ab2028d73e Fix a long line in a README file 2017-06-16 09:55:21 -06:00
Gregory Nutt
389144412c Merge branch 'ieee802154' of bitbucket.org:nuttx/nuttx into ieee802154 2017-06-16 07:53:07 -06:00
Gregory Nutt
777964a0cf Clicker2-STM32: Enable RAMLOG in mrf24j40-6lowpan configuration. Update README. 2017-06-16 07:49:23 -06:00
Gregory Nutt
af25740ca5 Update README: 2017-06-15 16:37:18 -06:00
Gregory Nutt
b8e968f191 clicker2-stm32: Add a configuratino that will, eventually, be used for 6loWPAN testing. 2017-06-15 14:26:10 -06:00
Gregory Nutt
150907a9b4 Rename configs/mrf24j40-radio to mrf24j40-mac 2017-06-15 12:30:58 -06:00
Gregory Nutt
e87991bbdc Merge remote-tracking branch 'origin/master' into ieee802154 2017-05-01 18:05:38 -06:00
Gregory Nutt
0e3438b854 clicker2-stm32: Add protected build knsh configuration. 2017-05-01 15:19:23 -06:00
Gregory Nutt
feba99e99c Merge remote-tracking branch 'origin/master' into ieee802154 2017-04-26 10:39:45 -06:00
Gregory Nutt
9aac1dd44d configs: Remove all setenv.bat files. Remove all references to setenv.sh and setenv.bat from all config README files. 2017-04-26 10:12:13 -06:00
Gregory Nutt
dfb9fe9b67 Clicker2-STM32: Rename configuration to mrf24j40-radio. Update remove. Remove some bad settings in the defconfig file (like OTGFS host support). 2017-03-25 07:20:04 -06:00
Gregory Nutt
b47e1888f5 Clicker2-STM32: Add usbnsh configuration. 2017-03-25 06:59:27 -06:00
Gregory Nutt
c3990e1b7f Update README and some comments 2017-03-24 12:46:01 -06:00
Gregory Nutt
c12b066f14 Update README file 2017-03-24 12:11:31 -06:00
Gregory Nutt
20b8ccd9d4 More updates to README.txt 2017-03-23 13:43:48 -06:00
Gregory Nutt
123a057be9 Update README 2017-03-23 11:43:32 -06:00
Gregory Nutt
2ec72c8f94 Clicker2-STM32: Add a README file 2017-03-23 11:17:43 -06:00