sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
32,518 Commits 1 Branch 0 Tags 291 MiB
8a1f3d6fa1
Commit Graph

3721 Commits

Author SHA1 Message Date
Gregory Nutt
f3229cc00a include/nuttx/usb/max3421e.h: Update MAX3421E header file. 2018-07-01 16:03:59 -06:00
Gregory Nutt
83d6c9b1b9 Update MAX3421E header file. 2018-07-01 13:03:53 -06:00
Gregory Nutt
3e9ba72441 net/sixlowpan: Fix typo uint16->uint16_t. Also picks up some cosmetic USB host changes. 2018-07-01 10:05:15 -06:00
Gregory Nutt
e59b26370d Squashed commit of the following: 
Fix a few typo/compilation problems.
    net/:  Remove all CONFIG_NET_xxx_TCP_RECVWNDO configuration variables.  They were used only to initialize the d_recwndo of the network device structure which no longer exists.
    net/:  Remove the device TCP receive window field (d_recvwndo) from the device structure.  That value is no longer retained, but is calculated dynamically.
    Remove some dangling references to CONFIG_NET_TCP_RWND_CONTROL.
    net/tcp:  Take read-ahead throttling into account when calculating the TCP receive window size.
    net/tcp: tcp_get_recvwindow() now returns the receive window size directly (vs. indirectly via the device structure).
    net/tcp:  Remove CONFIG_NET_TCP_RWND_CONTROL.  TCP window algorithm is now trigged only by CONFIG_NET_TCP_READAHEAD.
 2018-07-01 07:59:33 -06:00
Gregory Nutt
6ec8f9ce83 include/nuttx/usb: Add header file for the MAX3421E. 2018-07-01 07:09:36 -06:00
Sebastien Lorquet
65be13bffe net/udp: Finish support for the UDP_BINDTODEVICE protocol socket option 2018-06-25 15:07:53 -06:00
Gregory Nutt
872a11b4a0 Correct some errors found in build testing. 2018-06-25 14:16:19 -06:00
Gregory Nutt
c65e1aa3df Squashed commit of the following: 
syscalls/:  Add syscall support for if_nametoindex() and if_indextoname()
    net/: Update some comments.
 2018-06-25 12:41:28 -06:00
Gregory Nutt
7c1394d814 Squashed commit of the following: 
net/netdev:  Add implementation of if_nametoindex() and if indextoname().
    net/pkt:  Raw AF_PACKET sockets now depend on CONFIG_NETDEV_IFINDEX.
    net/procfs:  Tweak to handle traversal of interfaces if CONFIG_NETDEV_IFINDEX is not defined.
    net/netdev.h:  Update netdev_findbyaddr() to use the assigned device index.
    Trivial typo fix
    net/netdev:  Add support for assigned an interface index to a device when it is regisgtered.
 2018-06-25 12:08:10 -06:00
Gregory Nutt
0786b5d053 net/tcp: Re-think CONFIG_NET_TCP_RWND_CONTROL TCP windowing controls. 2018-06-24 14:46:12 -06:00
Gregory Nutt
fe592d502c include/limits.h: Fix a signed-ness error introduced in a recent commit. Documentation/: Update acronym list. 2018-06-23 17:43:55 -06:00
Gregory Nutt
a0e169ad7b net/: Fix a sixlowpan typo bug recently introduced; Rename g_ipv6_allzeroaddre with the more meaning g_ipv6_unspecaddr since the all-zero address is the IPv6 unspecified address (sometime IN6_ADDR_ANY). Remove more inline tests for IPv6 multicast with tcommint net_is_addr_mcast() macro. Update some comments. 2018-06-23 12:53:27 -06:00
Gregory Nutt
5bb216fb90 net/: There are many different checks for IPv6 multicast addresses. Most of the checks are different. RFC 3513 clearly specifies how to detect an IPv6 multilcast address: they should begin with 0xffxx. I did not change some of the checks in ipv6_input.c, however. In that file, the comments indicate that the code should only pick of certain mulicast address that begin withi 0xff02. 2018-06-23 10:13:38 -06:00
Gregory Nutt
5db2f993f9 Trivial updates from review of vecto I/O logic. 2018-06-23 09:01:42 -06:00
Gregory Nutt
706a6a2c19 Trivial typo fixes 2018-06-23 06:20:25 -06:00
Sebastien Lorquet
8fa3f54ba9 include/sys/socket.h: Break up some long lines 2018-06-22 12:34:31 -06:00
Gregory Nutt
341497484e include/sys/syscall.h: Fix some kruft that snuck into the file with the last changes. 2018-06-16 13:07:12 -06:00
Gregory Nutt
8fca244f36 syscall: clock_systimer() is no longer a system call. It has been replaced with the equivalent, standard interface clock() as the system call. 
sched/clock:  Move the implementation of clock() from libs/libc/time to sched/clock.  This is necessary because it calls the (now) internal OS function clock_systimer.  clock() is now accessed only via a system call in certain configuratins.
libs/libc/wqueue:  Replace calls to clock_systimer() with calls to the equivalent clock().
 2018-06-16 12:50:28 -06:00
Gregory Nutt
8fdbb1e0a4 Elimate use of the non-standard type systime_t and replace it the equivalent, standard type clock_t 
Squashed commit of the following:

    sched:  Rename all use of system_t to clock_t.
    syscall:  Rename all use of system_t to clock_t.
    net:  Rename all use of system_t to clock_t.
    libs:  Rename all use of system_t to clock_t.
    fs:  Rename all use of system_t to clock_t.
    drivers:  Rename all use of system_t to clock_t.
    arch:  Rename all use of system_t to clock_t.
    include:  Remove definition of systime_t; rename all use of system_t to clock_t.
 2018-06-16 12:16:13 -06:00
Juha Niskanen
5b899b76c4 drivers/sensors: Add support for Telair T6713 carbon dioxide sensor 2018-06-15 06:52:16 -06:00
Gregory Nutt
c213bac2c4 include/netdb.h: remove use of 'restrict'. Causes compile errors with some toolchains. Add formal parameter names to prototypes so that they are more self-documenting. 2018-06-12 21:11:48 -06:00
Masayuki Ishikawa
9f682056f9 Merged in masayuki2009/nuttx.nuttx/termios_branch (pull request #655) 
libs/libc/termios: Add lib_cfmakeraw.c

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: GregoryN <gnutt@nuttx.org>
 2018-06-12 14:05:39 +00:00
Juha Niskanen
1f4a1eab6d libs/libc/netdb: Add getaddrinfo() and friends. 2018-06-08 07:07:21 -06:00
Gregory Nutt
a94e3284b3 syslog: Enable is partial, crippled version of syslog_flush(); arch/: Call syslog_flush() from assertion handling logic. 2018-06-07 16:29:16 -06:00
Gregory Nutt
a581d7c2e3 arch/: Relasted to last big change to force interrupts to be disabled. In the SMP case, we still must call leave_critical_section() at least once in order to compensate for the fact that the irqcount was incremented in up_schedsigaction(). 2018-06-06 17:04:12 -06:00
Masayuki Ishikawa
fb07bd7e27 Adds loopback test for digital MIC on lc823450 via i2schar driver. 
Squashed commit of:

  configs/lc823450-xgevk: Enable DMDIN0 (Digital MIC)
  I2S: Add ioctl interface to i2s_ops_s and i2schar driver
  arch/arm/src/lc823450: Add DGMIC in lc823450_i2s.c
  configs/lc823450-xgevk: Add i2schar driver to lc823450_wm8776.c
  configs/lc824350-xgevk: Enable AUDIO_I2SCHAR in audio/defconfig
  configs/lc823450-xgevk: Update README.txt
 2018-06-05 10:34:22 -06:00
Mateusz Szafoni
b5ec5349b0 Merged in raiden00/nuttx (pull request #648) 
libdsp: initial commit

* libdsp: initial commit

* libdsp: cosmetics

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-05-30 12:36:06 +00:00
Gregory Nutt
f3392e0a6c drivers/serial: Add a timeout to uart_tcdrain(). Even if tcflush() is used to discard buffered data, the close() can still hang if (a) hardware flow control is enabled, (b) CTS == 1, and (c) there is data stuck in the hardware Tx FIFO. tcflush() does not currently clear the MCU serial drivers' hardware Tx FIFOs. This is a workaround for that. 2018-05-27 11:39:34 -06:00
Gregory Nutt
9da3d4a2a9 drivers/lcd and configs/olimex-lpc1766stk: Remove support for the Nokia6100 LCD. That LCD uses a 9-bit SPI interface (the 9th bit being the command/data bit that is normally a discrete). That communication was never successfully integrated. I now believe that it would would require some special support from the low-level, MCU SPI driver to manage that 9th bit. The deleted code is still available in the Obsoleted repository in the nuttx/drivers/lcd, nuttx/configs/olimex-lpc1766stk, and Patches directories. 2018-05-19 16:46:21 -06:00
Gregory Nutt
2366c13f87 include/nuttx/fb.h: Fix a type _BEND -> _BLEND 2018-05-18 13:36:58 -06:00
Gregory Nutt
c84342d357 include/nuttx/video/fb.h: No, I was right the first time. sys/types.h is needed in some inclusion contexts. 2018-05-18 08:21:08 -06:00
Gregory Nutt
d813c867aa include/nuttx/fb: Last change was wrong. It was not a missing header. It was just a dumb typo. 2018-05-18 08:03:48 -06:00
Gregory Nutt
eaa1570fba include/video/fb.h: Use of size_t requires inclusion of sys/types.h 2018-05-18 07:50:10 -06:00
Gregory Nutt
8b0b7636a8 include/nuttx/video/fb.h: Make type used for overlay number consistent; Use standardized types (size_t and fb_coord_t) whenever possible. 2018-05-18 07:24:36 -06:00
Gregory Nutt
af8b1abf73 Merged fboverlay into master 2018-05-17 16:11:09 -06:00
Gregory Nutt
8befa072a5 include/sys/resource.h: Trivial typo fix. 2018-05-13 12:12:49 -06:00
Gregory Nutt
3208e4835e include/sys: Add resource.h 2018-05-13 10:59:49 -06:00
Gregory Nutt
4a9a421c34 Back out part of f4bcaa4fc2dc2f06d5632d3b74f43c25a6e7e845.If CONFIG_ARCH_IDLE_CUSTOM is defined, then it should not use the version of lc823450_idle.c in arch/arm/src/lc823450. That part was correct before the PR. If CONFIG_ARCH_IDLE_CUSTOM, then the build should use a custom IDLE loop in the board src/ directory. 2018-05-11 06:26:01 -06:00
Gregory Nutt
024364eeef Clean up some spacing in the last commit... Seemed like a good idea at the time, but it is better to be consisten than better. 2018-05-10 15:59:40 -06:00
Michael Jung
29af41a85f libc/unistd: Initial, minimal implementation of sysconf(). Only sufficient to support the functionality of less standard getdtabilesize(). 2018-05-10 14:08:34 -06:00
Michał Łyszczek
16ce1552bc /include/nuttx/mtd/configdata.h: Fix copy-paste comment in configdata.h 2018-05-08 09:09:47 -06:00
Anthony Merlino
b1275abd4b Merged in antmerlino/nuttx/ina3221 (pull request #636) 
drivers/sensors: Adds support for INA3221 power sensor. This has a 3 channel bus/shunt voltage pairs.

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-05-02 22:29:59 +00:00
Gregory Nutt
cd12ea7788 Costmetic changes from review of last PR. 2018-05-02 16:29:22 -06:00
Anthony Merlino
385d4a9108 Merged in antmerlino/nuttx/rgb_multichan (pull request #635) 
drivers/rgbled: Adds support for multichannel PWM (multiple PWM channels on a single timer)

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-05-02 22:21:49 +00:00
Michael Jung
121211f096 progmem interface: Discern r/w and erase page sizes. Introduce new up_progmem_erasesize architecture API to be able to communicate the read/write page size independently from erase page size. Implement up_progmem_erasesize for all architectures that already support progmem, assuming that for those architectures the sizes of both read/write and erase pages are identical. 2018-05-01 06:23:52 -06:00
Gregory Nutt
fd844f8eac include/nuttx/wireless/bluetooth: Move Bluetooth header files from include/nuttx/wireless to include/nuttx/wireless/bluetooth for symmetry with other wireless technologies. 2018-04-29 12:43:09 -06:00
Gregory Nutt
f5d0fc7447 fs/vfs and net/udp: Repartition logic of commit 0c963449d6, moving into net/udp. Add support to handle connected UDP sockets. The correct 'optimal blksize' to return is the MSS. The MTU is always too big. 2018-04-27 08:36:25 -06:00
Gregory Nutt
47bf3376d1 Costmetic changes to README and to comments. 2018-04-26 22:00:11 -06:00
hhuysqt
144e335b85 drivers/wiresless/ieee80211: Correct some initialization problems with BCM43362 chip. Adds BCM43428 support. arch/arm/src: Add support for SDIO card to SDIO driver. 
Squashed commit of the following:

Author: Gregory Nutt <gnutt@nuttx.org>
    include/nuttx/wireless/ieee80211:  Cosmetic, coding standard changes from review of last merge.
    drivers/wireless/ieee80211:  Cosmetic, coding standard changes from review of last merge.
    configs/photon:  Cosmetic, coding standard changes from review of last merge.
    arch/arm/src/stm32:  SDIO changes from last review:  Fix a few long lines and other coding standard issues; Make additions for SDIO card support dependent on a configuration option.

Author: hhuysqt <hyq9606@126.com>
    Return IEEE 802.11 MAC address just as ethernet does
    Modifyed bcmf_board_setup_oob_irq declaration
    Modified OOB ISR function types
    Add some logic according to WICED SDK
    Bug fixed: data_offset counts in 4-bytes
    Add BCM43438 logic for future developement
    Add tips on using telnet
    Use SDIO in-band interrupt instead of OOB interrupt, because Photon seems to unconnect the OOB interrupt line...
    add SDIO in-band interrupt logic
 2018-04-26 08:10:23 -06:00
Pelle Windestam
0c963449d6 fs/vfs: Added support for checking if a descriptor is a socket in fstat(). 2018-04-26 06:49:13 -06:00