Commit Graph

19426 Commits

Author SHA1 Message Date
ligd
8a3683fb9f rptun: add ns_match callback to resolve rptun deadlock
thread A: accept -> net_lock -> socket_rpmsg_accept
          -> rpmsg_register_callabck -> rptun_lock
thread B: ns_bind -> rpmsg_socket_ns_bind -> get_tx_payload_buffer
          -> rptun_wait_tx -> usrsock_rpmsg_ept_cb -> usrsockdev_write
          -> net_lock -> deadlock

fix:
add ns_match callback

Signed-off-by: ligd <liguiding1@xiaomi.com>
2022-07-27 20:36:51 +08:00
Peter van der Perk
9e7e45df76 Evaluate n in preprocessor before masking 2022-07-25 23:47:05 +08:00
Peter van der Perk
ec118743ea NX style fixes 2022-07-25 23:47:05 +08:00
Peter van der Perk
eae3f77673 Fix wrong comment style 2022-07-25 23:47:05 +08:00
Peter van der Perk
b3590f00b3 NXStyle and preprocessor fixes
Co-authored-by: Jari van Ewijk <jari.vanewijk@nxp.com>
2022-07-25 23:47:05 +08:00
Jari van Ewijk
dd1096695d Add initial support for NXP S32K3 MCU family
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
2022-07-25 23:47:05 +08:00
raiden00pl
8eae3bb5ff stm32f0l0g0/stm32_spi.c: fix receiving data for half duplex mode 2022-07-25 23:46:33 +08:00
raiden00pl
351c9dc837 stm32f0l0g0/stm32_spi.c: remove unused spi_readbyte function 2022-07-25 23:46:33 +08:00
raiden00pl
af4d65416a stm32f0l0g0/stm32_spi.c: add missing SPI mode config and fix ifdef 2022-07-25 23:46:33 +08:00
raiden00pl
69986fad84 stm32f0l0g0/hardware/stm32_spi.h: remove unused definitions 2022-07-25 23:46:33 +08:00
raiden00pl
92b676479a stm32l4/Kconfig: add support for STM32L476JG and STM32L476JE 2022-07-23 16:51:31 -03:00
curuvar
c21c7ac8dc Added Adafruit QT Py RP2040 board.
Added ability to configure indivdual UART, SPI and I2C pin location.
2022-07-23 18:25:38 +08:00
curuvar
421b8ae3e7 Ability to use newer pico-sdk with RP2040 builds (Issue #4919) 2022-07-23 14:36:52 +08:00
Fotis Panagiotopoulos
ad7f503cfa sim: Increased priority of loop task. 2022-07-23 00:22:35 +08:00
Jouni Ukkonen
e268b23142 OpenSBI: Add configurable support for domain init
Initialize .domains_init function entry point in sbi_platform_operations when
CONFIG_OPENSBI_DOMAINS=y. In this case, the board specific code must provide
the "board_domains_init" function.

Signed-off-by: Jouni Ukkonen <jouni.ukkonen@unikie.com>
2022-07-22 19:00:33 +03:00
ligd
8f54f9e1c3 sim: idle pm should do PM_RESOTRE in critical section
Signed-off-by: ligd <liguiding1@xiaomi.com>
2022-07-22 09:06:38 +03:00
Fotis Panagiotopoulos
30f8d33bca Fixed path calculation in BBS RAM. 2022-07-22 10:59:57 +08:00
ligd
df365008b2 arm_secure_irq: fix NVIC_IRQ_DBGMONITOR un-secure set failed
NVIC_DEMCR.SDME is a read-only bit

Signed-off-by: ligd <liguiding1@xiaomi.com>
2022-07-22 01:48:55 +03:00
Petro Karashchenko
2291f601ee arch/arm/samv7: fix SPI 16-bit transactions in DMA mode
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-07-21 23:26:20 +08:00
Abdelatif Guettouche
ae1cbc47ef esp32&c3/Kconfig: CONFIG_ESP32(C3)_WIRELESS doesn't need to be user
selectable.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2022-07-20 22:02:28 +03:00
Abdelatif Guettouche
20c6996e81 esp32c3/Kconfig: Don't select options already selected.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2022-07-20 22:02:28 +03:00
Abdelatif Guettouche
4ccedb176e arch/esp32: Re-organise shared functions and options for ESP32 Wireless code
- Introduce the ESP32_WIFI option to replace the broader
ESP32_WIRELESS option.  ESP32_WIRELESS is used by both WIFI and BLE.

 - Move common functions from esp32_wifi_adapter to esp32_wireless.

 - Change the order of including the external libraries to avoid undefined references.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2022-07-20 22:02:28 +03:00
Abdelatif Guettouche
770147ffe3 arch/esp32: Introduce the ESP32_RTC option.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2022-07-20 22:01:25 +03:00
Masayuki Ishikawa
06b158a490 arch: arm64: Fix warnings in arm64_cpstart.c
Summary:
- Fix warnings in arm64_cpstart.c if CONFIG_DEBUG_INFO=n

Impact:
- None

Testing:
- Tested with qemu-a53:nsh_smp

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-07-19 10:49:32 +08:00
Xiang Xiao
2166c98809 Add printflike and scanflike to all printf/scanf like functions
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-07-18 14:14:36 +03:00
Xiang Xiao
61dff1c125 arch/arm64: Implement up_nputs
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-07-17 17:31:19 +03:00
Xiang Xiao
aad5fbd2fb arch: Add up_nputs function to handle the non '\0' string correctly
and change up_puts as a simple macro

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-07-17 17:31:19 +03:00
Michal Lenc
4484d04a8d samv7: add RX DMA support to serial driver
This commit adds RX DMA support to serial driver. The DMA is currently
supported only for USART peripherals, not for UART. It uses two circular
buffers which size can be setup by SAMV7_SERIAL_RXDMA_BUFFER option.

The idle bus interrupt is enabled to ensures data are read even if the
buffer is not yet full. The timeout can be setup by
SAMV7_SERIAL_DMA_TIMEOUT option.

This adds support only for RX transfers.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2022-07-16 15:39:20 +03:00
Michal Lenc
e3e282bd8a samv7: add DMA API for circular buffers
This commit adds functions sam_dmarxsetup_circular() and
sam_dmarxstart_circular() that create API for operating with two or more
circular buffers. This can be used for DMA operation with serial driver
or ADC where ping pong buffers are required to successfully transfer the
data at high speed.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2022-07-16 15:39:20 +03:00
Michal Lenc
89a2b51b96 samv7: add RS-485 mode support to USART driver
This commit enhances SAMV7 serial driver with RS-485 mode available to
USART peripherals. The hardware automatically sets RTS pin high when
data are transfered and low then no transfer occurs. Only USART peripherals
support this mode, UART peripherals do not.

This mode can be enabled by configuration option SAMV7_USARTx_RS485MODE.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2022-07-16 15:39:20 +03:00
raiden00pl
8e5e6ab8cb stm32/Kconfig: stm32_i2s needs SPI_DMA enabled 2022-07-16 11:10:01 +03:00
raiden00pl
a8e7f7742c stm32f0l0g0/Kconfig: set default n for hidden options 2022-07-16 11:10:01 +03:00
raiden00pl
d307e5a7f5 stm32f0l0g0/Kconfig: hide STM32F0L0G0_SPI_DMA option and select it automatically 2022-07-16 11:10:01 +03:00
raiden00pl
1b45982521 stm32f0l0g0/Kconfig: remove the duplicated SPI DMA section 2022-07-16 11:10:01 +03:00
raiden00pl
e39afbf277 stm32/Kconfig: set default n for hidden options 2022-07-16 11:10:01 +03:00
raiden00pl
12273d0aa9 stm32/Kconfig: hide STM32_SPI_DMA option and select it automatically 2022-07-16 11:10:01 +03:00
raiden00pl
1616edbb81 stm32f7/Kconfig: hide STM32F7_SPI_DMA option and select it automatically 2022-07-16 11:10:01 +03:00
raiden00pl
6aef19617b stm32h7/Kconfig: hide STM32H7_SPI_DMA option and select it automatically 2022-07-16 11:10:01 +03:00
raiden00pl
cb94579ab7 stm32wl5/Kconfig: hide STM32WL5_SPI_DMA option and select it automatically 2022-07-16 11:10:01 +03:00
raiden00pl
3c0a3dabfc stm32f0l0g0/SPI: add support for half duplex, simplex rx and simplex tx modes 2022-07-16 02:00:53 +08:00
curuvar
d69d9eb0c9 Added I2C Slave to RP2040
Added length to I2C slave callback.
2022-07-16 01:56:52 +08:00
raiden00pl
2428438037 stm32f0l0g0/SPI: fix compilation for DMA enabled 2022-07-15 11:38:36 -03:00
raiden00pl
c7e6366e91 stm32f0l0g0/SPI: enable SPI for STM32G0 2022-07-15 11:38:36 -03:00
raiden00pl
f702c89c33 stm32f0l0g0/SPI: configure DMA support individually for each SPI 2022-07-15 11:38:36 -03:00
raiden00pl
056e11a3e5 stm32f0l0g0/SPI: only SPI1 and SPI2 are present in STM32 M0 devices 2022-07-15 11:38:36 -03:00
raiden00pl
47e29d9402 stm32f0l0g0: remove references to non-existent ADCs, only ADC1 present on STM32 M0/M0+ devices 2022-07-15 11:36:43 -03:00
Masayuki Ishikawa
82cd9b0a4a arch: arm64: Add stack coloration for SMP
Summary:
- This commit adds stack coloration for SMP

Impact:
- None

Testing:
- Tested with qemu-a53:nsh_smp

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-07-15 16:16:02 +08:00
Masayuki Ishikawa
3682bcd4b3 arch: arm64: Fix do_stackcheck()
Summary:
- Since the stack coloration is done for every 32bits
  this function should be done in the same way.

Impact:
- None

Testing:
- Tested with qemu-a53:nsh

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-07-15 16:16:02 +08:00
qinwei1
e77b06721b arch: arm64: ARMv8-A support for NuttX
N/A

Summary:

Arm64 support for NuttX, Features supported:

1. Cortex-a53 single core and SMP support: it's can run into nsh shell at
   qemu virt machine.

2. qemu-a53 board configuration support: it's only for evaluate propose

3. FPU support for armv8-a: FPU context switching at NEON/floating-point
  TRAP is supported.

4. psci interface, armv8 cache operation(data cache) and smccc support.

5. fix mass code style issue, thank for @xiaoxiang781216, @hartmannathan @pkarashchenko

Please refer to boards/arm64/qemu/qemu-a53/README.txt for detail

Note:
1. GCC MACOS issue
The GCC 11.2 toolchain for MACOS may get crash while compiling
float operation function, the following link describe the issue
and give analyse at the issue:

https://bugs.linaro.org/show_bug.cgi?id=5825

it's seem GCC give a wrong instruction at certain machine which
without architecture features

the new toolchain is not available still, so just disable the MACOS
cibuild check at present

Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
2022-07-14 09:35:49 -04:00
Gustavo Henrique Nihei
68c722c051 xtensa/esp32: Build patched IDFBoot for Protected Mode support
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
2022-07-14 14:57:57 +08:00