Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Previous fix to RNDIS response queueing caused unaligned access
to response buffer in some configurations. On ARM Cortex-M, this
would cause hardfault if optimizer used strd instruction.
Fix by allocating the buffer as uint32_t. RNDIS messages are always
a multiple of 4 bytes in size, so this ensures alignment.
Gracefully handle output queue full conditions. This shouldn't happen
in practice as the host is supposed to limit the number of commands
simultaneously in execution.
Reset the response queue on RNDIS_RESET_MSG. This way communication
can recover even if host and device get out of sync.
Sometimes Windows would send RNDIS_KEEPALIVE_MSG and RNDIS_QUERY_MSG close
to each other. This would cause the latter command to overwrite the reply for
the prior command. This in turn will cause Windows to drop the connection after
a 20 second timeout.
Easy way to reproduce the issue is to open the Windows "Adapter Status" dialog that
shows the realtime TX/RX byte counts. This causes multiple RNDIS_QUERY_MSGs per
second, and the connection will drop in less than an hour.
This commit fixes this issue, and other potential race conditions (such as USB
descriptor read in middle on RNDIS query) by using a separate queue for the reply
packets.
to save the preserved space(1KB) and also avoid the heap overhead
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I694073f68e1bd63960cedeea1ddec441437be025
* Simplify EINTR/ECANCEL error handling
1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx
* Unify the void cast usage
1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
Squashed commit of the following:
Author: Gregory Nutt <gnutt@nuttx.org>
Ran nxstyle against many of the affected files. But this job was too big for today. Many of the network drivers under arch are highly non-compiant and generate many, many faults from nxstyle. Those will have to be visited again another day.
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
This effects all network drivers as well as timing related portions of net/: devif_poll_tcp_timer shouldn't be skipped in the multiple card case. devif_timer will be called multiple time in one period if the multiple card exist, the elapsed time calculated for the first callback is right, but the flowing callback in the same period is wrong(very short) because the global variable g_polltimer is used in the calculation. So let's pass the delay time to devif_timer and remove g_polltimer.
RNDIS composite support
* NuttX usb/composite.h: Forward-declare composite_devdesc_s.
This avoids "error: conflicting types for 'composite_initialize'"
on some versions of GCC. Because of the cross-inclusion between
usbdev.h and composite.h, the full declaration is not always
available.
* NuttX: USB Composite driver: Fix strid comparison
The last string ID used by composite driver is 4, and
the number of IDs used is 5 (0..4). The comparison
strid <= COMPOSITE_NSTRIDS caused composite driver to
reply with -EINVAL for id 5, even though it should be
available for subdevices to use.
* NuttX: RNDIS USB driver: Add support for composite configuration.
Approved-by: GregoryN <gnutt@nuttx.org>
drivers/usbdev: Fix buffer overrun check in rndis.c
The rndis driver has been working since 13 Nov 2017.
However, I finally found that it depends on network and buffer
configurations. If a receiving TCP packet is devided into smaller
ones based on USB max packet size, this condition check works
correctly.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: GregoryN <gnutt@nuttx.org>
This makes the user interface a little hostile. People thing of an MTU of 1500 bytes, but the corresponding packet is really 1514 bytes (including the 14 byte Ethernet header). A more friendly solution would configure the MTU (as before), but then derive the packet buffer size by adding the MAC header length. Instead, we define the packet buffer size then derive the MTU.
The MTU is not common currency in networking. On the wire, the only real issue is the MSS which is derived from MTU by subtracting the IP header and TCP header sizes (for the case of TCP). Now it is derived for the PKTSIZE by subtracting the IP header, the TCP header, and the MAC header sizes. So we should be all good and without the recurring 14 byte error in MTU's and MSS's.
Squashed commit of the following:
Trivial update to fix some spacing issues.
net/: Rename several macros containing _MTU to _PKTSIZE.
net/: Rename CONFIG_NET_SLIP_MTU to CONFIG_NET_SLIP_PKTSIZE and similarly for CONFIG_NET_TUN_MTU. These are not the MTU which does not include the size of the link layer header. These are the full size of the packet buffer memory (minus any GUARD bytes).
net/: Rename CONFIG_NET_6LOWPAN_MTU to CONFIG_NET_6LOWPAN_PKTSIZE and similarly for CONFIG_NET_TUN_MTU. These are not the MTU which does not include the size of the link layer header. These are the full size of the packet buffer memory (minus any GUARD bytes).
net/: Rename CONFIG_NET_ETH_MTU to CONFIG_NET_ETH_PKTSIZE. This is not the MTU which does not include the size of the link layer header. This is the full size of the packet buffer memory (minus any GUARD bytes).
net/: Rename the file d_mtu in the network driver structure to d_pktsize. That value saved there is not the MTU. The packetsize is the memory large enough to hold the maximum packet PLUS the size of the link layer header. The MTU does not include the link layer header.
RNDIS support on STM32F4Discovery
* stm32f4discovery: Add stm32_netinit.c to avoid a compilation error
* stm32f4discovery: Add rndis initialization in stm32_bringup.c
NOTE: MAC address for the host side starts 0xaa. This assignment
scheme should be fixed later.
* stm32f4discovery: Add rndis configuration
NOTE: STM32F4Discovery + DM-STF4BB
* drivers/usbdev/rndis.c: Fix some issues in rndis.c
Introduce rndis_transmit() and change rndis_rxdispatch() to avoid
packet corruption. Introduce max packet size for dual speed which
is mainly used for high speed mode. Fix adjusting MTU warning
on Linux host. Fix data corruption if a packet size excceds MTU.
NOTE: Max packet size is not configured dynamically. This should
be fixed in the future version.
* stm32f4discovery: Modify #ifdef condition for rndis in stm32_bringup()
* drivers/usbdev/rndis.c: Change HPWORK to ETHWORK
* drivers/usbdev/rndis.c: Merge the commit 07b98ccbb5
Previous commit b09365784a was based on old rndis.c thus resulted
in reverting the commit 07b98ccbb5. This change merges the commit.
NOTE: In the commit 07b98ccbb5, max packet size of bulkout was
assumed to be 64. In this commit, priv->epbulkout->maxpacket is
used instead.
Approved-by: Gregory Nutt <gnutt@nuttx.org>
