sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
30,136 Commits 1 Branch 0 Tags 291 MiB
8a4be7175e
Commit Graph

1161 Commits

Author SHA1 Message Date
Andrew Webster
cdd187a7f3 TCP: check for sndcb before using it 2016-01-22 15:54:45 -06:00
Andrew Webster
df211ee46a TCP: add writable check during poll 
When a poll requesting POLLOUT happens, the poll should return
immediately if a write will not block.  This change adds that, as
opposed to the old behaviour of blocking until a timer from the
Ethernet driver eventually triggers the poll to complete.

This is only implemented for buffered TCP.  Unbuffered TCP should
behave as before.
 2016-01-22 15:52:14 -06:00
Andrew Webster
99f5fcda70 iTCP: use lowlevel syslog to avoid infinte recursion 
If stdout is a socket (e.g. telnet), then the debug message will cause
more TCP data to be sent, which generates another message, and so on
 2016-01-22 15:41:48 -06:00
Gregory Nutt
f348e68069 Update to use 64-bit timer when available 2016-01-21 11:54:26 -06:00
Gregory Nutt
8e9f884eb7 Step 1 in /etc/resolv.conf support 2016-01-13 15:06:44 -06:00
Gregory Nutt
f87358faf9 correct some conditional compilation; update some comments 2016-01-12 07:05:50 -06:00
Gregory Nutt
1608b7c33f Some networking logic was used helpers from apps/netutils. Not good. Quick fix is to duplicate logic 2016-01-09 15:56:08 -06:00
Gregory Nutt
795ddd7e80 OS modules: Add basic procfs support. A module registry that will eventually be used to support lsmod 2015-12-12 17:42:25 -06:00
Gregory Nutt
59b912477e Fix some warnings: Mismatched prototypes 2015-12-05 10:36:00 -06:00
Gregory Nutt
c16648b3fd Most cosmetic but also includes a fix for a compile problem from Ken Pettit 2015-12-01 12:54:57 -06:00
Gregory Nutt
6af3ba78b9 Remove CONFIG_NET_PINGADDRCONF. This was a uIP way of assigning IP addresses, but is not standard and not a appropriate feature in general. 2015-12-01 07:48:56 -06:00
Gregory Nutt
eb8668b0f7 net/: Add procfs support for network device status 2015-11-27 16:39:14 -06:00
Gregory Nutt
9d8462aa23 net/: Move net_procfs.c to net/procfs/. Partition logic a little better to make space to support net device procfs as well 2015-11-27 13:53:33 -06:00
Gregory Nutt
e4236941c6 net/net_procfs.c: Add basic support for networking procfs entries 2015-11-27 12:33:58 -06:00
Gregory Nutt
2a93c66948 include/nuttx/net/netdev.h and several Ethernet drivers in arch/: Most network drivers to not support statistics. Those that do only support them when DEBUG is enabled. Each driver collects an architecture specific set of statistics and there is no mechanism in place to view those statistics. Thus, the driver feature was mostly useless. This change standardizes the driver statistics and puts the definition in the common network device structure defined in netdev.h where they can be accessed by network applications. All Ethernet drivers that collect statistics have been adapted to use these common statistics. 2015-11-26 12:08:09 -06:00
Gregory Nutt
6209c51206 net/: More clean-up of spacing/alignment issues 2015-10-08 15:10:04 -06:00
Gregory Nutt
af086c40ff Remove dangling whitespace 2015-10-04 15:28:54 -06:00
Gregory Nutt
0b12dbf95d Fix some spacing problems 2015-10-04 15:04:00 -06:00
Gregory Nutt
cb9e27c3b0 Standardize naming used for public data and function groupings 2015-10-02 16:30:35 -06:00
Gregory Nutt
fec3d2cf62 recvfrom: Fixes for compilation with only raw, packet sockets 2015-09-14 09:06:08 -06:00
Gregory Nutt
a7e43c7fdb Eliminate some warnings 2015-09-08 09:20:18 -06:00
Gregory Nutt
d700793077 Fix a compile error when IPv6 is enabled 2015-09-07 16:34:25 -06:00
Alan Carvalho de Assis
f10a103108 Fix tcp_send_unbuffered when NET_ETHERNET is not defined. 2015-09-07 13:31:35 -06:00
Gregory Nutt
9c66bde5b0 Fix typo in pre-processor command noted by Pierre-noel Bouteville. Also move # of pre-processior command to column 1 2015-09-05 09:10:48 -06:00
Gregory Nutt
14297afb83 Cosmetic fix to break up long line 2015-09-03 07:33:50 -06:00
Gregory Nutt
36f4d0e9fc Fix a error in some comments 2015-09-02 20:03:28 -06:00
Gregory Nutt
0e2986f131 net/tcp: The logic that binds a specific networkd device to a connection was faulty for the case of multiple network devices. On bind(), the local address should be used to associate a device with the connection (if the local address is not INADDR_ANY); On connect(), the remote address should be used (in case the local address is INADDR_ANY). On accept(), it does not matter but the remote address is the one guarenteed to be available. 2015-09-02 19:48:31 -06:00
Gregory Nutt
9fcad39a45 Trivial typo fix 2015-09-02 10:09:33 -06:00
Paul A. Patience
3b89eabd50 Correct #if to #ifdef when the macro can be undefined. Fix bug in AT24XX driver: it should compare AT24XX_ADDRSIZE to 2. 2015-09-01 13:52:29 -04:00
Gregory Nutt
63071a563a Costmetic changes 2015-08-27 10:38:43 -06:00
Gregory Nutt
b1e09d4847 net/socket and net/tcp: Fix a problem in whent there are multiple network devices. Polls were being sent to all TCP sockets before. This is not good because it means that packets may sometimes be sent out on the wrong device. That is inefficient because it will cause retransmissions and bad performance. But, worse, when one of the devices is not Ethernet, it will have a different MSS and, as a result, incorrect data transfers can cause crashes. The fix is to lock into a single device once the MSS is locked locked down. 2015-08-27 09:06:46 -06:00
Gregory Nutt
3bcdb218ff Networking: Get rid of the tcp_mss macro. It is confusing and only obfuscates what is really going on 2015-08-27 08:39:17 -06:00
Gregory Nutt
007aabc46f Fix a badly formatted comment 2015-08-26 19:18:04 -06:00
SaeHie Park
a268e0aeb9 Fix a typo from an earlier commit 2015-08-26 18:12:58 -06:00
Saehie ParK
e6dbd3d903 Networking: Fix network device name assignment logic for the case of the local loopback device. There is only one local loopback network device and it is unnumbered 2015-08-25 20:03:25 -06:00
Anton D. Kachalov
b125c36849 Field `d_sndlen' is unsigned. It is always >= 0. 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-08-26 00:16:52 +03:00
SaeHie Park
e983e547e1 Networking: Correct return value from psock_tcp_accept(). From SaeHie Park 2015-08-25 07:15:21 -06:00
Gregory Nutt
79aa3d40b0 Kconfig: CONFIG_NET_MULTILINK and CONFIG_NET_MULTINIC must be support if the loopback device and any real network device are selected 2015-08-25 06:51:15 -06:00
Gregory Nutt
3c5f817513 Networking: Local loopback is basically functional and is no longer EXPERIMENTAL 2015-08-24 13:58:57 -06:00
Gregory Nutt
933d74e5c1 Networking: With these changes, I can ping the local loopback device from the simulator 2015-08-24 13:49:12 -06:00
Gregory Nutt
0b012c7978 Fix some initial loop back device compilation errors; mark configuration as EXPERIMENTAL 2015-08-24 11:29:54 -06:00
Gregory Nutt
07bdff9ef7 Networking: Add NetDB support for the local loopback device 2015-08-24 10:08:26 -06:00
Gregory Nutt
e21501c699 Merge remote-tracking branch 'origin/master' into localhost 2015-08-24 08:29:36 -06:00
Gregory Nutt
569ff602ea Networking: Remove bogus references to PPP as a link layer protocol 2015-08-24 08:29:07 -06:00
Gregory Nutt
ea2fafb024 Add definitions to support a local loopback link layer 2015-08-24 08:25:08 -06:00
Gregory Nutt
89b5ef8d35 wdogs: Fix counting of free, pre-allocated wdog timers. The could could get decremented below zero in some situations 2015-08-21 11:30:22 -06:00
Pavel Pisa
12b1c04508 recvfrom(): Correct wait for new data when NET_UDP_READAHEAD is enabled. Fix size accounting when recvfrom_udpreadahead() sets state.rf_recvlen == -1. I have not checked if data are accumulated to the right position in the buffer however. 
Signed-off-by: Pavel Pisa <ppisa@pikron.com>
 2015-08-21 09:15:06 -06:00
Gregory Nutt
4c4868c69f More cosmetic changes: Fix some errors in comments and some indentation problems 2015-08-11 19:23:51 -06:00
Gregory Nutt
850225223d Costmetic fix to a comment 2015-08-11 19:21:15 -06:00
Gregory Nutt
530d229361 net/udp: Add support for send() with connected UDP sockets 2015-08-11 19:17:55 -06:00
Max Neklyudov
7d04104485 Networking: Allow receipt of empty UDP packets. From Max Neklyudov 2015-08-11 08:34:16 -06:00
Gregory Nutt
f94fe747ae Undo part of a previous change. Move get/sethostname back from net/netdb to libc/unistd 2015-07-08 11:11:52 -06:00
Gregory Nutt
fca919f3d2 Networking: Fix some compilation issues noted with network is build with CONFIG_BUILD_KERNEL 2015-07-05 11:18:56 -06:00
Gregory Nutt
6380832ab7 Move the header of set/sethostname from libc/unisted to net/netdb. This is OS internal stuff 2015-07-05 10:43:37 -06:00
Stavros Polymenis
701509f9bd Add implementations of uname() and gethost(). From Stavros Polymenis. 2015-07-03 07:50:27 -06:00
Gregory Nutt
09c7373f24 Fix misc. compilation error/warning detected by tools/testbuild.sh 2015-07-01 14:33:37 -06:00
Gregory Nutt
342f5fe33d Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
0ad53183e1 Networking: Fix a compile problem introduced in NuttX-7.6 when CONFIG_NET_SENDFILE=y 2015-06-24 14:52:57 -06:00
Gregory Nutt
ed9c45bcef Networking: Fix compilation error if IPv6 is enabled 2015-06-17 15:00:04 -06:00
Gregory Nutt
8f7752d956 Networking: Modify how callback structures are stored to avoid another potential use of a stal pointer. 2015-06-03 08:11:57 -06:00
Gregory Nutt
edbb5d0840 networking: Correct a typo introduced with recent networking changes 2015-06-02 15:04:02 -06:00
Gregory Nutt
e22deff1ab TCP connect. Move the location where the socket is marked as connected in order to avoid a potential race condition 2015-05-31 12:24:24 -06:00
Gregory Nutt
b493dde4cf TCP networking: In the TCP connection operation, it was trying to setup the network monitor BEFORE the socket was successfully connected. This, of course, has ALWAYS failed because the socket is not yet connected and the TCP state is not yet correct for a connected socket. However, because of other changes net_startmonitor(0 no returns a failure condition that causes worse problems when trying to connect. The fix is to move the logic that starts the network monitor to AFTER the socket has been successfully connected. 2015-05-31 11:35:28 -06:00
Gregory Nutt
a47a0d237c Costmetic changes to networking logic 2015-05-31 10:29:53 -06:00
Gregory Nutt
33085cb309 Networking: The network device list was protected by a re-entrant semaphore. With the recent change to support network device callback, the network stack needs to access the network device list too. Some drivers, however, run the network stack from the interrupt level -- this is bad but a fact in the current state. Of course,those drivers are unable to take the semaphore and will assert. 
The solution here is to eliminate the device devices semaphore altogether.  This eliminates netdev_semtake() and netdev_semgive() and replaces them with net_lock() and net_unlock() which have larger scope as needed for this purpose.
 2015-05-31 08:34:03 -06:00
Gregory Nutt
6687e156e6 Revamp last change. IFF_UP only required when allocating callback, not freeing. 2015-05-30 21:13:58 -06:00
Gregory Nutt
28b46c7bfa To be valid, a network device must not only exist, but be in the UP state 2015-05-30 12:54:18 -06:00
Gregory Nutt
cc340aaa92 TCP networking: Since the network monitor now allocates a callback structure, it is critical to make sure that the networking monitor is stopped when the socket is closed or any other loss of connection. What was innocuous before would now be a memory leak 2015-05-30 11:49:55 -06:00
Gregory Nutt
8b029fbbee TCP networking: Hook the network monitor into the device event notification logic 2015-05-30 11:29:47 -06:00
Gregory Nutt
933b95ac80 Forgot to add a file in the last commit 2015-05-30 09:17:46 -06:00
Gregory Nutt
04a661a97c TCP networking: Add support for network driver events 2015-05-30 09:12:27 -06:00
Gregory Nutt
ab50e9d04d Networking: Get rid of g_ipv4_allzeroaddr and g_ipv4_alloneaddr. It is more efficient and more intuitive to use INADDR_ANY and INADDR_BROADCAST 2015-05-29 15:16:11 -06:00
Gregory Nutt
34509a9ad5 UDP should use dev=NULL if the address in the lookup is INADDR_ANY 2015-05-29 14:56:44 -06:00
Gregory Nutt
0bdf2d5360 UDP Networking: Misc fixes to get the last changes working + cleanup 2015-05-29 14:32:56 -06:00
Gregory Nutt
fa8b7c19b7 Forgot to add a file in the last commit 2015-05-29 11:03:02 -06:00
Gregory Nutt
f10fdf7ad4 Networking: Add a test to see a device pointer is still valid 2015-05-29 11:01:03 -06:00
Gregory Nutt
2102892e7b Fix missing file and some compilation errors from the last UDP committ 2015-05-29 10:45:41 -06:00
Gregory Nutt
e672bcebfd UDP Networking: Add support for device event notification for UDP transfers. 2015-05-29 10:21:06 -06:00
Gregory Nutt
e28a8b1416 Raw sockets: Correct some compile issues; better modularized device-related logic 2015-05-29 08:47:21 -06:00
Gregory Nutt
988fbf0dcc Merge branch 'master' of ssh://git.code.sf.net/p/nuttx/git into multinic 
Conflicts:
	nuttx/ChangeLog
 2015-05-29 08:15:17 -06:00
Gregory Nutt
5337176cdf Networking: setsockopt() fails when setting timeouts to values less that an 100 msec. That is because the timeout is limited to stops of 1 decisecond and because the conversion of structure timeval was truncating the microsecond remainder. The utility net_timeval2dsec now accespts and option to determin how it handles the remainder: truncate, discarding the remainder, use the remainder to round to the closed decisecond value, or use any non-zero remainder to the next larger whole decisecond value. 
For the setsockopt() case, it will always use the final option.  This means that a time of zero (i.e., not timeout) can only occur if the value zero was explicated provided to setsockopt().
 2015-05-29 07:17:15 -06:00
Gregory Nutt
0595d54470 Correct some comments 2015-05-28 19:44:04 -06:00
Gregory Nutt
4747c04c94 Trivial correction to some comments 2015-05-28 19:43:35 -06:00
Gregory Nutt
b5c005d5a4 Merge remote-tracking branch 'origin/master' into multinic 
Conflicts:
	nuttx/ChangeLog
 2015-05-28 19:30:48 -06:00
Gregory Nutt
7ec0725533 Missed a couple of function headers 2015-05-28 19:28:41 -06:00
Gregory Nutt
d319b7c6f0 Networking: PKT logic now uses the device event list 2015-05-28 12:40:05 -06:00
Gregory Nutt
e81f279315 Networking: Modify event list handling: Now there are two event lists each device structure: (1) One is for ARP and ICMP data related evetns, the other is for device related events. Callback allocation/free routines no accept a device paramter as well as a list: If the device paramter is added, then the callback goes into both the connection-related liast AND the device event list. Thus each socket type can received both custom data-related events as well as common device related events. 2015-05-28 12:01:38 -06:00
Gregory Nutt
3606d05888 Merge branch 'multinic' 2015-05-28 09:07:18 -06:00
Gregory Nutt
3260db7dbe Reorder some network events bitset to make the event class clearer 2015-05-28 08:55:36 -06:00
Gregory Nutt
01d176af76 net_startmonitor.c always returned zero. In the case where a socket has already been closed, it correctly handled the disconnetion event but still returned OK. Returning OK causes the callers of net_startmonitor to assume that the connection was okay, undoing the good things that net_startmonitor did and causing the socket to be marked as connected. This behavior was noted by Pelle Windestam. 2015-05-28 08:23:51 -06:00
Gregory Nutt
0e2b6929b4 Add function headers to prototypes in net/socket/socket.h 2015-05-28 07:26:03 -06:00
Gregory Nutt
d6c3ed1c6f Networking: Fixes an important TCP bug: 16-bit flags was being converted to 8-bits in a few locations, causing loss of status indications 2015-05-27 17:17:42 -06:00
Gregory Nutt
4fd0192a3e Networking: No that ARP, ICMP, and ICMPv6 reside in the same list we need to make the definitions of ARP_POLL, ICMP_POLL, and ICMPv6_POLL different because there are small differences in the context for each. 2015-05-27 15:04:51 -06:00
Gregory Nutt
390eeaae69 Add function headers to netdev.h header file 2015-05-27 14:34:15 -06:00
Gregory Nutt
2ecff2a432 Add some missing NETDEV_DOWN support for ICMPv6 auto configuration and router support 2015-05-27 12:49:39 -06:00
Gregory Nutt
7d8e8bc188 Missed a place where NETDEV_DOWN needs to be added to notification flags 2015-05-27 12:22:07 -06:00
Gregory Nutt
b94321cfb4 Extend device specific callbacks to ICMPv6 and ARP. Fix some IPv6 compilation errors that have crept in 2015-05-27 11:39:44 -06:00
Gregory Nutt
8ecb84ed89 Improve icmp handling if MULTINIC enabled. From Max Neklyudov 2015-05-27 09:26:00 -06:00
Gregory Nutt
608f812407 Fix bug in IPv6 router from Max Neklyudov. 2015-05-13 07:26:24 -06:00
Gregory Nutt
f20ac5ef93 Add inclusion of assert.h in networking files where needed to avoid compilation errors. From Max Neklyudov. 2015-05-13 07:24:22 -06:00
Gregory Nutt
8cb4e78a1a Complete implementation of the IPv6 routing logic. From Max Neklyudov. 2015-05-13 07:22:02 -06:00
Gregory Nutt
0f5c35260b Local sockets: Local stream sockets had problem of double releasing pipes (both server and client attempt release), which causes wrong pipe pair being closed in multi-client case. Solve by adding per connection instance ID to pipe names. From Jussi Kivilinna (2015-05-12). 2015-05-12 07:47:32 -06:00
Gregory Nutt
3c1af2feed Local sockets: Add poll support for Unix stream sockets. From Jussi Kivilinna. 2015-05-12 07:41:12 -06:00
Gregory Nutt
2fcb93d2ca Correct some network lock logic: Two error conditions where the network was not being unlocked and one where it was getting unlocked twice. From Jussi Kivilinna. 2015-05-12 07:28:26 -06:00
Gregory Nutt
1f3ee83134 Increase the size of the number of bytes sent from uint16_t to uint32_t in order to avoid TCP errors with long sessions. For exmple: 
int hello_main(int argc, char *argv[])
{
   uint32_t i;
   for(i = 0; i < 65536; i++)
    {
      printf("Hello, World!!\n");
    }

  printf("press any key!!\n");
  if (getchar()=='t')
    return 0;
  else
    return 1;
}

When ran in a Telnet session, the "press any key" is not displayed because the tcp session closed unexpectedly with:

tcp_input: ERROR: conn->sndseq xx, conn->unacked xx"

This is fixed by increasing the width of conn->sent to 32-bits to prevent overflow.

From Rony XLN
 2015-05-11 07:14:25 -06:00
Gregory Nutt
d35926ea4a Fix typo introduced by commit a00f14a60a8ec54fbcf63e44d00f7101ec7cb5a3 2015-05-08 14:19:18 -06:00
Gregory Nutt
00011d4766 Another newly missing semicolon after a debug assertion. Noted by Librae 2015-04-29 15:56:08 -06:00
Gregory Nutt
621eae86b1 Networking: If IPV6 is not enabled, an warning occurs for an unused variable, which is currently used inside the IPV6 block, but declared outside. From ObitalFox. 2015-04-27 11:28:28 -06:00
Gregory Nutt
7a745c3fa4 Use common macro(s) for calculating link layer header length. From Brennan Ashton. 2015-04-13 13:53:13 -06:00
Gregory Nutt
3840c2a14b Fix several typos in comments 2015-04-09 16:13:03 -06:00
Gregory Nutt
3ba9dda227 socket: net_dupsd: Do not call sockfd_socket() twice. From Juha Niskanen 2015-03-12 08:11:08 -06:00
Gregory Nutt
21d6e41032 Add TUN device. From Max Neklyudov 2015-03-11 06:52:56 -06:00
Gregory Nutt
5c13722416 Networking: Improve the network device registration logic. When multiple link types are used, modify how each interface number is assigned to the device name by incrementing the device number individually for each interface link type. From Max Neklyudov. 2015-02-27 08:23:14 -06:00
Gregory Nutt
19f3d46eb0 Fix a list handling error in netdev_unregister(). From Max Neklyudov 2015-02-27 08:01:31 -06:00
Gregory Nutt
cded7ea682 Fix some time value changes; mostly changing greater than 1000000000 to greater than or equal to 1000000000. From Juha Niskanen 2015-02-20 07:07:36 -06:00
Gregory Nutt
63ab39b274 VFS: The inode unlink method should not be support if operations on the root pseudo-filesystem are disabled. 2015-02-18 09:34:58 -06:00
Gregory Nutt
db741dd695 Move some useful internal logic from recvfrom.c and udp_callback.c and put them in ip.h where they can be used more generally 2015-02-17 07:37:44 -06:00
Gregory Nutt
686dcbb79c Move some useful internal macros from udp_send.c and put them in ip.h where they can be used more generally 2015-02-17 07:08:11 -06:00
Gregory Nutt
eb8f5e548f Purely cosmetic changes resulting from last review IPv6 UDP change 2015-02-16 15:23:02 -06:00
Gregory Nutt
3f5ff4b210 IPv4 mapping to IPv6 implementation. Just for UDP. From Macs Neklyudov 2015-02-16 14:33:58 -06:00
Gregory Nutt
d6704a1cd7 Suffer the consequences of moving struct timeval to its correct location 2015-02-15 15:18:35 -06:00
Gregory Nutt
8337710084 Stray semicolon caused compile failure when IPv6 enabled 2015-02-14 09:30:22 -06:00
Gregory Nutt
8840102554 Networking: Divide net_intiialize() into net_setup() and net_initialize() to solve a chicken-and-egg problem. net_setup() must be caleld before up_initialize() is called so that networking data structures are ready to register new network devices. 
net_initialize() now does only timer related operations and is called AFTER up_initialize() where the timers are configured.  This is really.
 2015-02-14 06:36:53 -06:00
Gregory Nutt
77d8f2f63d Add some inclusions of nuttx/net.h to two files. Without these there can be compilation errors in certain configurations. From Max Neklyudov. 2015-02-13 13:43:19 -06:00
Gregory Nutt
005643de2c Networking: Fix a compilation error recently introduced into the raw packet logic 2015-02-11 09:30:30 -06:00
Gregory Nutt
a82b8fd71f Networking: Fix several build errors/warning with IPv4 + IPv6 + multiple networks are enabled. 2015-02-10 06:54:10 -06:00
Gregory Nutt
8a380a084d IOB Configuration: Default number of IOB changes must be more than zero is UDP read-ahead is enabled. 2015-02-10 06:25:55 -06:00
Gregory Nutt
b756df982d net/: Lots of build problems introduced into multiple NIC support. Many places where conditional logic based on CONFIG_NETDEV_MULTINIC is confused with CONFIG_NET_MULTILINK. Lots of code changed with IPv6 that was never compiled with MULTINIC enabled. Still some problem with parameter passing. 2015-02-09 18:15:34 -06:00
Gregory Nutt
559f1ef825 Networking: Clean up and consolidate some clunky stuff by adding new net_timedwait() function 2015-02-09 07:50:10 -06:00
Gregory Nutt
1928feafca Networking: Fix some errors that crept in with IPv6 2015-02-06 13:34:19 -06:00
Gregory Nutt
252802d1cd Remove inclusion of some un-necessary header files. 2015-02-06 08:50:53 -06:00
Gregory Nutt
3e6705b526 IPv6: Separate function that converts prefix lengths to a netmask 2015-02-06 08:11:09 -06:00
Gregory Nutt
10cf7e9634 Make some conditional compilation consistent 2015-02-05 14:26:11 -06:00
Gregory Nutt
3bd6dcf435 IPv6 fixes: Both ICMPv6 autonomous auto-configuration and the ICMPv6 router function appear to be fully functional. 2015-02-05 12:48:02 -06:00
Gregory Nutt
c7f71c99a5 Networking: Changes need to build ICMPv6 'router' configuration on STM32 with network debug enabled 2015-02-05 11:47:56 -06:00
Gregory Nutt
6568d94902 ICMPv6: Add logic to behave like a router (if so configured): NuttX will not send the router advertisement message in response to any router solicitation messages. 2015-02-05 09:43:29 -06:00
Gregory Nutt
111f4a45a3 Forgot to add this file before a previous commit 2015-02-05 09:43:07 -06:00
Gregory Nutt
da1d1d7139 ICMPv6: Add option to send Router Advertisement Messages. 2015-02-05 09:28:00 -06:00
Gregory Nutt
6f3f43d930 IPv6: Add a netmaks for the local link address 2015-02-05 05:43:57 -06:00
Gregory Nutt
453c25cdbb Minor logic simplification 2015-02-04 21:06:11 -06:00
Gregory Nutt
28b89b7a65 ICMPv6 Auto-configuration: If no router reponds to the Router Solicitation, claim the link local address by sending the Neighbor Advertisement and return success 2015-02-04 16:13:27 -06:00
Gregory Nutt
c5ed77120f ICMPv6: Separate out Neighbor Advertise message so that we can reuse it 2015-02-04 15:43:54 -06:00
Gregory Nutt
f558dfbb96 Remove unnecessary, inappropriate inclusion of ARP head file in IPv6 code 2015-02-04 14:52:46 -06:00
Gregory Nutt
24d800398e Networking: Break out Ethernet definitions into a separate file; add IPv6 multicast addresses as common globals, Ethernet drivers need to filter link-local, all nodes Ethernet address 2015-02-04 14:51:20 -06:00
Gregory Nutt
6159d1307d Forgot to add a file from a previous commit 2015-02-03 17:45:24 -06:00
Gregory Nutt
0e38ca9a42 ICMPv6: Fix some multi-cast addresses 2015-02-03 17:26:05 -06:00
Gregory Nutt
f7ace410d1 Minor updates to comments, debug messages, documentation 2015-02-03 17:01:48 -06:00
Gregory Nutt
154d3ce955 ICMPv6: Some initial bugfix from first tests of the ICMPv6 auto-configuration logic. so far so good but a lot more testing is needed 2015-02-03 16:19:08 -06:00
Gregory Nutt
9791e829f5 ICMPv6: This completes coding of the ICMPv6 auto-configuration feature. It is not yet functional 2015-02-03 15:40:56 -06:00
Gregory Nutt
66f0198e3f Networking: Add support for sending ICMPv6 Router Solicitation and receiving Router advertisement. This is a part of the ICMPv6 auto-configuration logic is still still not complete 2015-02-03 13:25:28 -06:00
Gregory Nutt
553b93cd23 Costmetic updates to comments 2015-02-03 11:19:33 -06:00
Gregory Nutt
0e23712db4 Add an ioctal() that can be used to perform ICMPv6 auto-configuration 2015-02-03 08:54:42 -06:00
Gregory Nutt
b427e8288b Add netlib and application hooks for ICMPv6 auto-configuration (still incomplete 2015-02-03 08:01:55 -06:00
Gregory Nutt
d89073ae13 Add some comments to C files 2015-02-03 06:04:54 -06:00
Gregory Nutt
88f6573f31 ICMPv6: Add file/build structure that will eventually support ICMPv6 auto-configuration 2015-02-02 17:54:48 -06:00
Gregory Nutt
f019d11384 Restore 20Msec default 2015-02-02 14:59:49 -06:00
Gregory Nutt
bba3fccd74 Networking: Apply the same ARP fix for the Neighbor Solicitation logic 2015-02-02 14:50:16 -06:00
Gregory Nutt
e4c602747b Networking: Fixes another CONFIG_NET_NOINTS issues. When called sem_timedwait() with the network locked, the network stays logcked while we wait which is not what we want (without CONFIG_NET_NOINTS, interrupts are re-enabled while we wait and all is well). 2015-02-02 14:48:11 -06:00
Gregory Nutt
fb72b1b1b7 Auto neighbor solicitation is no longer EXPERIMENTAL and is the default for the DK-TM4C129X/ipv6 configuration 2015-02-02 14:09:06 -06:00
Gregory Nutt
a07a764d42 ICMPv6: Adds basic logic to support verification that we have the IPv6 address in the Neighbor Table. This feature is important because otherwise the first packet sent to a remote peer will fail (it will be replaced with a Neighbor Solicitation). 2015-02-02 13:44:31 -06:00
Gregory Nutt
4ce94a7e95 IPv6: Eliminate a warning from UDP code 2015-02-02 11:37:22 -06:00
Gregory Nutt
b1b8c0e47d IPv6: More framework for automatic neighbor solicition. I think this also corrects and error in a broadcast/multicast address chedk 2015-02-02 11:34:51 -06:00
Gregory Nutt
3385082b99 IPv6: Remove an unusd file (kruft from original IPv6 develoment); Add inital hooks to support automatic Neighbor Solitication 2015-02-02 10:49:50 -06:00
Gregory Nutt
011ff49685 Cosmetic update to a few comments 2015-02-01 12:23:57 -06:00
Gregory Nutt
6d7891c4de Fix compile issues with configs/sim/nettest 2015-02-01 12:00:30 -06:00
Gregory Nutt
898d511e05 Unix domain: Fix some bugs in logic the frees stream FIFOs 2015-02-01 09:16:55 -06:00
Gregory Nutt
f8bb77365a Unix domain: Enable logic to clean up the FIFOs underlying stream sockets with those sockets are disconnected. Tehre is still no corresponding clean-up logic in place for Unix domain datagram sockets because the life of the FIFO is not as well known in that case 2015-02-01 08:52:26 -06:00
Gregory Nutt
0fc8d2fcc5 Unix domain: Add options to build in stream or datagram support separately 2015-01-31 07:58:51 -06:00
Gregory Nutt
6b8da59df6 Networking: Add fcntl support for Unix domain sockets and UDP sockets with read-ahead enabled 2015-01-30 14:41:09 -06:00
Gregory Nutt
f421723fbd Fix some errors in debug assertions 2015-01-30 13:29:56 -06:00
Gregory Nutt
62b706fa68 If a Unix domain socket is non-blocking, then the underlying FIFO should also be opened non-blocking 2015-01-30 12:43:37 -06:00
Gregory Nutt
e8a74527a0 Fix mimatched #if/#endif 2015-01-30 12:28:29 -06:00
Gregory Nutt
e86d00913e Unix domain/FIFOs: Fix a race condition between FIFO buffer operations and the opening and closing of FIFOs which necessary when the FIFOs are used to support Unix domain, datagram sockets. The default policy is the deallocate FIFO buffering when the last client closes the pipe. When when used for datagram communicatinos, packets left in the FIFO will be lost. Some like UDP read-ahead is needed: The buffered data in the FIFO needs to be retained until the reader gets a chance to re-open the FIFO. Added an ioctl (PIPEIOC_POLICY) to control the buffer policy. Default (0) is the legacy behavior; Unix domain datagram logic sets the alternative policy so that the packet data persists after the FIFO is closed. 2015-01-30 11:14:24 -06:00
Gregory Nutt
4205d68505 Networking: Any linger UDP read-ahead buffers must be freed when UDP socket is closed 2015-01-30 09:44:00 -06:00
Gregory Nutt
2a39105b3f Unix domain: Add logic to release references to the half duplex FIFO after sendto and recvfrom 2015-01-30 09:28:55 -06:00
Gregory Nutt
52f9a2744c Should fix another warning reported by Travis 2015-01-30 08:57:35 -06:00
Gregory Nutt
a76b87305a Networking: Should fix a few compile errors/warnings reported by Travis 2015-01-30 08:54:40 -06:00
Gregory Nutt
f357ba6c80 Fix error just introduces into recvfrom. From Macs N. 2015-01-30 08:22:44 -06:00
Gregory Nutt
a438784054 Forgot to add a file in the last commit 2015-01-30 07:28:30 -06:00
Gregory Nutt
5736cf10af Networking: Separate TCP poll logic out of net/sockets/net_poll.c and move it into the new net/tcp/tcp_netpoll.c. 2015-01-30 07:25:01 -06:00
Gregory Nutt
de91d34a19 Networking: Separate out UDP poll logic from socket/net_poll.c into a new udp/udp_netpoll.c; Create a skeleton local/local_netpoll.c for future poll support on Unix domain sockets. 2015-01-30 07:09:25 -06:00
Gregory Nutt
6eda06888a Eliminate a warning 2015-01-30 06:39:23 -06:00
Gregory Nutt
ccc72edc0b Networking: Add UDP read-ahead support and support for poll/select on UDP sockets. From Macs N. 2015-01-30 06:08:26 -06:00
Gregory Nutt
7e7d228cd7 Update a comment 2015-01-30 05:40:28 -06:00
Gregory Nutt
7f95e4fb2c Networking: Fix a major TCP bug introduced with commit e71c09ce9777ff732cb60bd07fb43d85522f79d6. Some connection logic was reorder -- setting the socket got moved BEFORE the point where the check was made if the socket was already connected. The resulting behavior was odd: Telnet would connect, but then when you exit and reconnect, it would fail to connect. But then if try again, it would connect okay. So the symptom was connect-fail-connect-fail-... 2015-01-29 16:30:47 -06:00
Gregory Nutt
8b9958b7ba Fix two compilation errors that occur when Unix domain occurs an IPv6 are enabled 2015-01-29 12:31:29 -06:00
Gregory Nutt
0deca5b039 Unix domain: Various fixes to get apps/examplex/udgram working 2015-01-29 11:05:04 -06:00
Gregory Nutt
e5f820a2cd Unix domain: Add sendto logic for SOCK_DRAM protocoal 2015-01-29 10:40:10 -06:00
Gregory Nutt
9abd8e2e64 Fix typo in conditional compilation 2015-01-29 10:08:16 -06:00
Gregory Nutt
f6bec26e53 Elminate some warnings with TCP and UDP are disabled 2015-01-29 09:33:45 -06:00
Gregory Nutt
ffb16f658f Unix domain: Add initial cut at redvfrom() for Unix domain datagram sockets 2015-01-29 07:47:09 -06:00
Gregory Nutt
1c8ddae655 Fix a typo in comments 2015-01-28 17:51:59 -06:00
Gregory Nutt
72ac79e7a1 Minor fixes after initial tests with apps/examples/udgram 2015-01-28 15:27:54 -06:00
Gregory Nutt
dfa642601a Merge remote-tracking branch 'origin/master' into afunix 2015-01-28 14:58:49 -06:00
Gregory Nutt
35a814abca net/socket/accept.c: Ooops.. deleted one too many header files 2015-01-28 14:56:06 -06:00
Gregory Nutt
2c7123197c Networking: Move UDP-specifc parts of sendto() out of socket/sendto.c and into udp/udp_sendto.c. Hook in Unix domain sokcet sendto() logic (still just a stub for the moment) 2015-01-28 13:41:24 -06:00
Gregory Nutt
508f8aefa6 Unix domain socket support is no longer EXPERIMENTAL 2015-01-28 13:22:53 -06:00
Gregory Nutt
e4e863e752 Merge remote-tracking branch 'origin/master' into afunix 2015-01-28 12:14:00 -06:00
Gregory Nutt
5c2aad64cd Networking: Missed header file inclusion 2015-01-28 12:09:00 -06:00
Gregory Nutt
9c2af5317f Merge remote-tracking branch 'origin/master' into afunix 2015-01-28 12:03:43 -06:00
Gregory Nutt
371a9fd84c Networking: Fix another deadlock condition. tcp_write_buffer_alloc() calls sem_wait() with network locked. That worked if CONFIG_NET_NOINTS was not defined because interrupts are automatically restored when the wait happens. But with CONFIG_NET_NOINTS=y, the wait blocks with the network locked -- bad style and also can lead to a deadlock condition 2015-01-28 11:56:11 -06:00
Gregory Nutt
6a1bfc9594 Unix domain: Fix a typo and some missing conditional compilation 2015-01-28 11:48:23 -06:00
Gregory Nutt
cba78c7349 Unix domain: More fixes. With these changes, apps/examples/ustream works 2015-01-28 08:39:48 -06:00
Gregory Nutt
5f9837dcc8 Merge remote-tracking branch 'origin/master' into afunix 
Conflicts:
	nuttx/ChangeLog
 2015-01-27 21:47:12 -06:00
Gregory Nutt
c4bd6f52b5 Networking: The are issues with the TCP write-ahead buffering if CONFIG_NET_NOINTS is enabled: There is a possibility of deadlocks in certain timing conditions. I have not seen this with the Tiva driver that I have been users but other people claim to see the issue on other platforms. Certainly it is a logic error: The network should never wait for TCP read-ahead buffering space to be available. It should drop the packets immediately. 
This was fixed by duplicating most of the IOB interfaces:  The versions that waited are still present (like iob_alloc()), but now there are non-waiting verisons of the same interfaces (like iob_tryalloc()).  The TCP read-ahead logic now uses only these non-waiting interfaces.
 2015-01-27 21:23:42 -06:00
Gregory Nutt
b76db036da Unix domain: A few more bugfixes 2015-01-27 17:31:42 -06:00
Gregory Nutt
ca2102febb Unix domain: A few fixes from early integration 2015-01-27 16:39:30 -06:00
Gregory Nutt
55d94b6748 Unix domain: With these changes I can build a system with no link layer enabled, only Unix domain sockets 2015-01-27 15:26:03 -06:00
Gregory Nutt
c250c97186 Unix domain: More fixed to build without Ethernet or Slip 2015-01-27 14:26:10 -06:00
Gregory Nutt
8f517ad0c1 recvfrom(): Missing else in conditional logic of recvfrom() 2015-01-27 14:14:53 -06:00
Gregory Nutt
c49c7bc447 Merge remote-tracking branch 'origin/master' into afunix 2015-01-27 14:12:41 -06:00
Gregory Nutt
cbf0608513 Various fixes to get Unix domain sockets to build on the simulator without Ethernet 2015-01-27 14:11:46 -06:00
Gregory Nutt
8f29039f42 Unix sockets: Fleshes out the recvfrom() logic 2015-01-27 11:51:24 -06:00
Gregory Nutt
120efa4717 Local sockets: Add basic packet send logic 2015-01-27 08:05:09 -06:00
Gregory Nutt
1f7b40ce15 Local sockets: Remove some ill-conceived logic 2015-01-27 07:03:20 -06:00
Gregory Nutt
a88b824f96 Networking: Hook in send and revcfrom Unix domain socket logic; still needs hooks for sendto logic 2015-01-26 18:47:48 -06:00
Gregory Nutt
2201c9b449 Add stub files for sending and receiving on FIFOs 2015-01-26 17:28:36 -06:00
Gregory Nutt
1828badd1d Networking: Add FIFO management logic needed to support Unix domain sockets 2015-01-26 13:30:27 -06:00
Gregory Nutt
a25f6cb7fd Replace an un-necessary goto 2015-01-25 17:53:01 -06:00
Gregory Nutt
f756545eb0 Networking: Add local Unix domain socket accept logic 2015-01-25 16:27:25 -06:00
Gregory Nutt
90e59217c6 Networking: Move TCP specific logic out of net/socket/accept.c to net/tcp/tcp_accept.c; add hooks for local, Unix doamin sockets 2015-01-25 15:46:05 -06:00
Gregory Nutt
0def771c8d Networking: Move TCP specific logic out of net/socket/accept.c to net/tcp/tcp_accept.c; add hooks for local, Unix doamin sockets 2015-01-25 15:45:51 -06:00
Gregory Nutt
59f9a1a286 Networking: Add local Unix domain socket listen logic 2015-01-25 14:16:44 -06:00
Gregory Nutt
c3f2023089 Networking: Add local Unix domain socket connection logic 2015-01-25 12:37:40 -06:00
Gregory Nutt
ffc02f30b0 Networking: Add logic for binding Unix domain sockets 2015-01-25 08:33:39 -06:00
Gregory Nutt
3b64518049 Networking: A litle more Unix domain socket logic 2015-01-25 07:36:16 -06:00
Gregory Nutt
666ee755da Hook local socket functions into socket creation and close logic 2015-01-24 15:19:50 -06:00
Gregory Nutt
81a3daca6d Add basic build structure for Unix domain sockets 2015-01-24 14:03:32 -06:00
Gregory Nutt
f4bb7f14e1 Networking: Clean up network status collection and presentation for IPv6 2015-01-24 08:26:12 -06:00
Gregory Nutt
96a53254dd Some minor clean-up of IPv4/6 flags 2015-01-24 07:29:43 -06:00
Gregory Nutt
e5d1ff373b Networking: IPv4 and IPv6 work together. This fixes a bug necessary to accomplish that as well as cleaning up a couple of other issues 2015-01-23 16:40:18 -06:00
Gregory Nutt
e02ced8c98 Networking: Final fixes. IPv6 pings now work in both directions 2015-01-23 15:10:47 -06:00
Gregory Nutt
8e844a3c27 Networking: Various bugfixes related to IPv6 ping 2015-01-23 14:40:09 -06:00
Gregory Nutt
30f0a942e1 Networking: First cut at ICMPv6 ping logic 2015-01-23 14:06:08 -06:00
Gregory Nutt
51f8e9dbf6 IPv6 is not longer EXPERIMENTAL 2015-01-23 11:43:03 -06:00
Gregory Nutt
af71b7a1ed Networking: Eliminate a warning with UDP checksums are suppressed 2015-01-23 11:42:12 -06:00
Gregory Nutt
f4ce875711 Networking: Fix issues with UDP packet length and checksum calculations when IPv6 is selected 2015-01-23 09:33:18 -06:00
Gregory Nutt
e22848c19c Networking: UDP checksums must always be used with IPv6 2015-01-23 09:31:44 -06:00
Gregory Nutt
b51c00c8d7 Networking: Need to set the IPv6 EtherType on outgoing IPv6 packets 2015-01-23 09:30:50 -06:00
Gregory Nutt
c77426e550 Cosmetic changes to comments; refresh configuration 2015-01-22 14:46:36 -06:00
Gregory Nutt
1c8dae4eee Correct calculation of initial MSS 2015-01-22 12:29:49 -06:00
Gregory Nutt
eac4ea7ae5 Networking: Back out a previous change. It is incorrect 2015-01-22 12:10:16 -06:00
Gregory Nutt
46fc574f0f Forgot to remove some debug instrumentation in the last commit 2015-01-22 10:35:11 -06:00
Gregory Nutt
7106469191 Armv7-M: Remove Px4-only setting of stack to 0xff. This is incompatible with standard NuttX stack montitoring logic 2015-01-22 10:09:10 -06:00
Gregory Nutt
2e8667d304 Networking: New domain field in socket structure is created by socket(), but missed cases where a socket is created via accept() or dup() 2015-01-22 07:50:31 -06:00
Gregory Nutt
6175e9eec5 Networking: Correct the value returned by accept() in the case where net_lockingwait() is called. It was returning -1 and losing the errno value. Noted by Rony Xln 2015-01-22 06:51:31 -06:00
Gregory Nutt
4ab8e85dba Networking: Change some debug outputto vebose debug output 2015-01-21 14:23:50 -06:00
Gregory Nutt
4db99c631f Networking IPv6: Fix and error when adding a neighbor to the table. Comparing wrong address. Add more debug info too 2015-01-21 14:13:57 -06:00
Gregory Nutt
7dd07f7179 Networking: IPv6 receipt logic errors. Don't save neighbor address in table when solicitation is recieved. Save it when the advertisement is received 2015-01-21 14:13:03 -06:00
Gregory Nutt
8132afb3de Fix some errors in memcpy arguments. No ampersands on array arguments. 2015-01-21 12:42:22 -06:00
Gregory Nutt
5e23a855ec More typos in debug statements 2015-01-21 10:32:59 -06:00
Gregory Nutt
354bc626ab Fix a typo introduced in the last commit 2015-01-21 10:31:18 -06:00
Gregory Nutt
3202819328 IPv6 -- various fixed from problems found in testing 2015-01-21 10:29:18 -06:00
Gregory Nutt
4498bf9f5b ICMPv6 Neighbor Advertisement: Need to set O flag or response is not used. Also, TTL=255 seems to be more-or-less standard in this message 2015-01-21 08:37:23 -06:00
Gregory Nutt
5d31687e75 Correct name of fields in struct sockaddr_in6: sin6_port and sin6_family, not sin_port and sin_family 2015-01-20 18:14:09 -06:00
Gregory Nutt
cdff532bfa Networking: When sending ICMPv6 advertisements and solicitations, set the NOARP bit so that we don't overwrite the destination MAC address 2015-01-20 15:59:52 -06:00
Gregory Nutt
67a655ecf0 Networking: Add logic to search the Neighbor Table and update the destination address in the output Ethernet header OR to send an ICMPv6 Neighbor Solicitation if there is no entry in the Neighbor table for the IPv6 address 2015-01-20 14:37:02 -06:00
Gregory Nutt
41bb57efea Fix typo in function name 2015-01-20 13:48:42 -06:00
Gregory Nutt
109c7c7437 Networking: Clean up IPv6 Neighbor Table logic 2015-01-20 12:31:56 -06:00
Gregory Nutt
d68cd0d8de Networking: Update ICMPv6 logic to RFCs 2015-01-20 11:06:51 -06:00
Gregory Nutt
aec4528882 Cosmetic standardization of some naming in comments 2015-01-19 16:02:56 -06:00
Gregory Nutt
33d95bdcee Networking: Hook in ICMPv6 polling operations into periodic network logic 2015-01-19 15:51:40 -06:00
Gregory Nutt
2fd334432c Networking: Fix to ICMPv6 logic: Needs to set source and destination address in the Ethernet header 2015-01-19 14:57:55 -06:00
Gregory Nutt
6d901e4d8b Networking: Costmetic changes 2015-01-19 14:56:35 -06:00
Gregory Nutt
13149536f2 Networking: Update ICMPv6 message numbers 2015-01-19 14:04:16 -06:00
Gregory Nutt
bd3d26ccd7 Networking: Fix an IPv6 bug: Wrong network byte order in comparison 2015-01-19 13:21:26 -06:00
Gregory Nutt
ce75017d7c Networking: net/neighbor/Make.defs was not being included by Makefile 2015-01-19 10:36:22 -06:00
Gregory Nutt
adc91965ed NSH library: Disable put and get commends of TFTP client is not enabled; disable wget command if web client is not enabled 2015-01-19 10:32:46 -06:00
Gregory Nutt
2842b5c5d6 Networking: Fix some problems with debug is enabled; fix a warning 2015-01-19 10:16:37 -06:00
Gregory Nutt
59c0757183 Fix a few more dangling IPv6 issues found by code inspection 2015-01-18 10:33:27 -06:00
Gregory Nutt
eb3c6e8390 Networking: Some fixes for compilation when both IPv4 and IPv6 are enabled 2015-01-18 09:23:22 -06:00
Gregory Nutt
f7663ef0ab Networking: Final detangle off IPv4 and IPv6 TCP/UDP send logic. The Networking subsystem now compiles with IPv6 enabled 2015-01-18 08:56:05 -06:00
Gregory Nutt
ea52bda8f9 Networking: Add IPv6 suppport to TCP application level sending logic 2015-01-17 18:18:19 -06:00
Gregory Nutt
d8b046f2fb Networking: Fix a simple IPv6 compile error 2015-01-17 17:48:15 -06:00
Gregory Nutt
2a2c925259 Merge remote-tracking branch 'origin/master' into ipv6 2015-01-17 17:08:22 -06:00
Gregory Nutt
86f617cc88 Networking: Straighten up use if IPv6/IPv4 in TCP connection logic 2015-01-17 17:07:54 -06:00
Gregory Nutt
cfbe12adb2 Networking: Fix some errors detected by Travis in configuration that have TCP on and UDP off and vice versa 2015-01-17 17:00:19 -06:00
Gregory Nutt
b187b4f381 Networking: Straighten up use if IPv6/IPv4 in TCP connection logic 2015-01-17 15:17:35 -06:00
Gregory Nutt
b80cdb3880 Fix a few warnings introduced with the last commit 2015-01-17 14:25:40 -06:00
Gregory Nutt
f7681dbb43 Networking: Detangling IPv6/4 logic in UDP connection structures 2015-01-17 14:13:56 -06:00
Gregory Nutt
94f9312150 Networking: Save the IP domain in the connection structure 2015-01-17 13:07:48 -06:00
Gregory Nutt
4a0eb1f0b1 Networking: Calculation of TCP and UDP checksums differ with IPv4 and IPv6 2015-01-17 12:31:39 -06:00
Gregory Nutt
e2933ca4cc Networking: Oops. Forgot to add a couple of files that were part of an earlier commit 2015-01-17 09:35:27 -06:00
Gregory Nutt
820509eadc Networking: Fix accept() so that it returns the correct IP address for the selected socket IP domain. 2015-01-17 09:27:05 -06:00
Gregory Nutt
4ad5998db3 net/socket and net/tcp: When we are ready to receive data or when we have outgoing data ready to be sent, we need to the notify the appropriate device driver of this condition. The notifying socket will be configured as either PF_INET or PF_INET6 and must look up the correct driver using the correct IP domain. 2015-01-17 08:33:14 -06:00
Gregory Nutt
2c251d845c include/net/if.h: Add a bit to the device flags to indicate if the device packet buffer holds an IPv4 or an IPv6 domain packet. Set/clear the flag along with the correct offset to the application payload data as each packet is received. 
net/socket, net/tcp, net/udp:  Add logic to select the domain of the outputgoing packet before sending any UDP or TCP packet.  This sets the bit to indicate the IPv4 or IPv6 domain and the correct offset to the output going payload data.
 2015-01-17 07:42:09 -06:00
Gregory Nutt
88a0e82934 Networking: Remove field d_sndata from the device structure. It is the same as d_appdata and unnecessary 2015-01-17 05:59:13 -06:00
Gregory Nutt
0f364f6ae6 Networking: Move net/ipv6 to net/neighbor 2015-01-16 16:49:48 -06:00
Gregory Nutt
8f8259a0d6 Networking: UDP and TCP MSS depends on the IP header size (as well as the link layer header size) and cannot be represented with a single value. 2015-01-16 15:03:10 -06:00
Gregory Nutt
2663538b0a Networking: Replace all references to the macros net_ipaddr_copy, net_ipaddr_hdrcopy, net_ipaddr_cmp, net_ipaddr_hdrcmp, and net_ipaddr_maskcmp with the appropriate IPv4 or IPv6 version of the macro (such as net_ipv4addr_copy). The goal is to support both IPv4 and IPv6 simultaneously. This requires that the macros be distinct and not conditionally defined to one on or the other. 2015-01-16 13:01:08 -06:00
Gregory Nutt
5e938941a6 Networking: Replace all references to net_ipaddr_t with either in_addr_t on net_ipv6addr_t. The goal is to support both IPv4 and IPv6 simultaneously. This requires that the two types be distinct and not conditionally typedef'ed to net_ipaddr_t. 2015-01-16 12:30:18 -06:00
Gregory Nutt
bee89be4f4 Networking: Drivers can have both IPv4 and IPv6 addesses, but a socket can only only one or the other; The socket connnection structures need to include a union of IPv4 and IPv6 addresses for the local address binding and for the remote address connections 2015-01-16 10:01:54 -06:00
Gregory Nutt
fe8b3c5220 Networking: More detangling of IPv6 logic. Next steps will be more invasive and will get moved to a branch 2015-01-16 08:51:18 -06:00
Gregory Nutt
5b45605991 Clean a few more IPv6 compilation issues; Add implementation of net_ipv6_maskcmp() 2015-01-15 15:55:52 -06:00
Gregory Nutt
630366272a Networking: Seperate tcp_input() and udp_input() into seprate functions tcp_ipv4_input(), tcp_ipv6_input(), udp_ipv4_input(), and upd_ipv6_input() than can deal will the data offsets caused by the differing sizes of the IP header. 2015-01-15 15:06:46 -06:00
Gregory Nutt
60e50ff3b5 Networking: More IPv6 detanglement 2015-01-15 13:08:28 -06:00
Gregory Nutt
5a441ce03b Networking: Misck IPv6 detanglement 2015-01-15 12:19:44 -06:00
Gregory Nutt
89538ac4a2 - Rename devif_input() ipv4_input() 
- Copy net/devif/devif_input.c to ipv6_input.c.  Remove all IPv4-specific logic.
- Rename net/devif/devif_input.c to ipv4_input.c.  Remove all IPv6-specific logic
- Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s
 2015-01-15 08:03:56 -06:00
Gregory Nutt
a49f0231d2 Networking: A few more IPv6-related fixes 2015-01-14 18:34:28 -06:00
Gregory Nutt
a7ce1279f9 Networking: (1) Copied all ICMP sources files to net/icmpv6 with proper renaming and removal of IPv4 logic, (2) remove IPv6 logic from files in net/icmp, (3) copied include/nuttx/icmp.h to icmpv6.h and removed IPv4 specific logic, (4) removed all IPv6 logic from icmp.h, (5) IP_HDRLEN became IPv4_HDRLEN and IPv6_HDRLEN, (6) ip_chksum() became ipv4_chksum() and ipv6_chksum(), and (7) added partial support for ICMPv6 statistics. 2015-01-14 16:10:38 -06:00
Gregory Nutt
99a18c84ff Networking: Remove all logic conditioned upon IPv6 from the net/icmp/directory 2015-01-14 14:47:40 -06:00
Gregory Nutt
fcd65e9d7d Networking: Make a home for ICMPv6 2015-01-14 14:26:50 -06:00
Gregory Nutt
7d68c22d7f Networking: Add support for IPv6 ioctls 2015-01-14 13:03:12 -06:00
Gregory Nutt
babe9cf08e Network: Add an IPv4 configuration option. Hardcoded to =y for now, but I would like to be able to select IPv4 and/or IPv6 in the future 2015-01-14 10:51:09 -06:00
Gregory Nutt
a6a9452c05 net/tcp/tcp_conn.c: Fix a logic error when CONFIG_NETDEV_MULTINIC is selected: net_unlock(flags) will be called will an uninitialized variable (2015-01-03). 2015-01-02 12:03:08 -06:00
Gregory Nutt
1aa528a572 More fixes to problems noted by cppcheck. Some are kind of risky; some are real bugs. 2014-11-25 14:10:35 -06:00
Gregory Nutt
6a3a2f466c Update comments and README 2014-11-24 07:25:40 -06:00
Gregory Nutt
8de38d719a Fix included IPv6 file name 2014-11-24 07:25:03 -06:00
Gregory Nutt
aa9700c1ab Update comments and read me 2014-11-23 12:52:18 -06:00
Gregory Nutt
b36dbe1d89 Add logic to netdev_findbyaddr() to return the correct network device for the case where a broadcast address is used. This change caused trivial ripples through other files because additional parameters are required for netdev_findbyaddr() when CONFIG_NET_MULTINIC 2014-11-23 11:00:22 -06:00
Gregory Nutt
43d036f587 Network routing: Refuse to perform routing table lookups for the Broadcast IP address. From Brennan Ashton 2014-11-23 08:36:34 -06:00
Gregory Nutt
d2a323ca19 Back inclusion of ipv6.h 2014-11-22 13:26:27 -06:00
Gregory Nutt
dc7a45ecf8 Extensions to ECP conneciton structure for the case of multiple networks. See additional comments regarding the similar change for UDP 2014-11-22 10:46:37 -06:00
Gregory Nutt
fbd82712da Add a comment 2014-11-22 09:08:31 -06:00
Gregory Nutt
d76ed2cbc5 Fix UDP routing error in last commit 2014-11-22 09:08:06 -06:00
Gregory Nutt
251249a954 Back out a misconception about INADDR_ANY introduce with some previous commits 2014-11-22 07:55:45 -06:00
Gregory Nutt
80fc094734 Make tcp_listener static scope; it is not used outside of tcp_conn.c 2014-11-22 07:14:17 -06:00
Gregory Nutt
2c2b5e6738 Fix routing of muli-network UDP packets 2014-11-21 17:44:12 -06:00
Gregory Nutt
15c07e0d67 Network: Misc changes to UDP bind logic for the case of multiple networks 2014-11-21 17:00:08 -06:00
Gregory Nutt
4dd021f351 Some ideas for how port assignments might work with multiple network interfaces 2014-11-21 14:21:30 -06:00
Gregory Nutt
fbedc361bb File missed in previous commit 2014-11-21 14:19:36 -06:00
Gregory Nutt
735aa4289a Network: Add logic to get a default network device (for the case where are multiple devices). For INADDR_ANY 2014-11-21 14:14:39 -06:00
Gregory Nutt
d297b623b4 Network: Add a file of IPv6 globals 2014-11-21 14:10:25 -06:00
Gregory Nutt
c64cb19861 Move IP header flags from tcp.h to ip.h and rename IP_FLAGS vs TCPFLAGS. The problem fixed here is that there IP flags were not available when TCP was disabled. The IP flags are used in ICMP and IGFMP 2014-11-17 17:16:46 -06:00
Gregory Nutt
8b2b7afdae Update TODO; Cosmetic changes to comments 2014-11-17 15:34:50 -06:00
Gregory Nutt
57bcb28991 changes for clean build with Ethernet+SLIP 2014-11-16 11:27:53 -06:00
Gregory Nutt
38754a3466 Completes basic changes to support per-device/per-link TCP receive window size 2014-11-16 11:15:21 -06:00
Gregory Nutt
2340d46d20 Rename NET_LL_MTU to NET_DEV_MTU; rename d_llmtu to d_mtu 2014-11-16 10:42:19 -06:00
Gregory Nutt
859748a94e Completes conversion of CONFIG_NET_BUFIZE to CONFIG_NET_ETH/SLIP_MTU 2014-11-16 09:22:38 -06:00
Gregory Nutt
ca7486d7f3 Add link MTU size to network device structure. 2014-11-16 08:49:14 -06:00
Gregory Nutt
51adb90e9a Network: Update SLIP configuration; Fix compile issues when building SLIP only 2014-11-15 14:36:49 -06:00
Gregory Nutt
daa94934eb Network: netdev_register() must assign the device name appropriately according to the link layer type 2014-11-15 14:21:11 -06:00
Gregory Nutt
08de18c1a6 Network: Various fixes for clean compile with both Ethernet and SLIP 2014-11-15 13:52:39 -06:00
Gregory Nutt
2e55db369d Network: All logic will now handle varialbe length link layer protocol headers within incoming packets. This permits use of multiple network interfaces with differing data links. For example, ETHERNET + SLIP 2014-11-15 13:13:23 -06:00
Gregory Nutt
a831ab21bc Merge remote-tracking branch 'origin/master' into llhdrlen 2014-11-15 10:04:49 -06:00
Gregory Nutt
ebb6fd1e9c Resove merge conflicts 2014-11-15 10:04:33 -06:00
Gregory Nutt
25d787ff12 Remove use of NET_LL_HDRLEN from net/arp logic. Use ETH_HDRLEN instead 2014-11-15 09:13:50 -06:00
Gregory Nutt
2b758537ea Network: Misc fixes for clean complete with both Ethernet and SLIP enabled 2014-11-15 08:55:50 -06:00
Gregory Nutt
388ef8db1a Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday 2014-11-15 08:22:51 -06:00
Gregory Nutt
64d18bfe12 NET: Fix some some more ARP/Ethernet releated configuration 2014-11-14 21:22:45 -06:00
Gregory Nutt
0d7c378e4e Costmetic change 2014-11-14 18:51:57 -06:00
Gregory Nutt
ebdff66c8b ARP: Add support for the case where there are multiple networks: One being Etherenet and the other not (say slip or perhaps someday PPP). In that case, we need to suppress ARP-related operations on the SLIP/PPP interface only 2014-11-14 18:25:33 -06:00
Gregory Nutt
e03c764d92 I don't think that the net_route function has ever worked correctly. The source ip was updated in the match struct instead of the route ip. From Brennan Ashton. 2014-11-14 16:45:25 -06:00
Gregory Nutt
8e5ae2ee18 EFM32: Fix typo in connecting ODD GPIO interrupt. Noted by Pierre 2014-11-08 06:18:21 -06:00
Gregory Nutt
ae3cc327c7 AIO now also supports socket transfers 2014-10-11 08:15:23 -06:00
Gregory Nutt
0abe6c66d7 Update everything under nuttx/net to use the corrected syslog interfaces 2014-10-08 10:48:11 -06:00
Gregory Nutt
d914f3ceec Major structure of file system functions to better support asynchronous I/O. Respository should not be trusted until I have a chance to verify everything 2014-10-06 10:53:25 -06:00
Gregory Nutt
205260d5e2 Reanem kzalloc to kmm_zalloc for consistency 2014-08-31 17:34:44 -06:00
Gregory Nutt
1780810d3d Rename kmalloc to kmm_malloc for consistency 2014-08-31 17:26:36 -06:00
Gregory Nutt
54fa3b0b59 Rename kfree to kmm_free for consistency with other naming conventions 2014-08-31 17:04:02 -06:00