sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
44,753 Commits 1 Branch 0 Tags 291 MiB
8a80a853b7
Commit Graph

316 Commits

Author SHA1 Message Date
Frank Benkert
c6942f6137 drivers/serial/serial.c: Optimize wait time in tcdram() for buffer emptying 
According to the specification, the close function must wait until all data
has been written before it closes the file (except O_NONBLOCK is set). The
maximum waiting time for this is not specified.

To be able to edit the file list of the process, the close function has to lock
the file list semaphore. After that the close function of the serial driver is
called.

Waiting for the complete transmission of all data is done in the serial driver.
This causes the semaphore to remain locked until all data has been sent.
However, no other thread of the process can edit the file list for that time
(open, close, dup2, etc.). This is not optimal in a multithreaded environment.
Therefore, we have to keep the waiting time within the driver as short as possible.
 2017-11-02 08:53:14 -06:00
Gregory Nutt
85a1a3cc98 drivers/usbdev: Correct input flow control logic when watermarks are not enabled. Problem not by and change based on suggestion by Juha Niskanen. 2017-10-18 06:49:11 -06:00
Gregory Nutt
5b04c25dcd drivers/serial/tcdrain: tcdrain() was recently added to the NuttX C library. But there is a problem. The specification of tcdrain() requires that it be a cancellation point. In order to do this, tcdrain was moved from the C library into the OS and the addition cancellation point hooks were added. In non-FLAT builds, access via system calls is also now supported. 2017-10-06 10:55:36 -06:00
Gregory Nutt
936df1bcb5 Adds new OS internal functions nxsig_sleep() and nxsig_usleep. These differ from the standard sleep() and usleep() in that (1) they don't cause cancellation points, and (2) don't set the errno variable (if applicable). All calls to sleep() and usleep() changed to calls to nxsig_sleep() and nxsig_usleep(). 
Squashed commit of the following:

    Change all calls to usleep() in the OS proper to calls to nxsig_usleep()

    sched/signal:  Add a new OS internal function nxsig_usleep() that is functionally equivalent to usleep() but does not cause a cancellaption point and does not modify the errno variable.

    sched/signal:  Add a new OS internal function nxsig_sleep() that is functionally equivalent to sleep() but does not cause a cancellaption point.
 2017-10-06 10:15:01 -06:00
Gregory Nutt
9568600ab1 Squashed commit of the following: 
This commit backs out most of commit b4747286b1.  That change was added because sem_wait() would sometimes cause cancellation points inappropriated.  But with these recent changes, nxsem_wait() is used instead and it is not a cancellation point.

    In the OS, all calls to sem_wait() changed to nxsem_wait().  nxsem_wait() does not return errors via errno so each place where nxsem_wait() is now called must not examine the errno variable.

    In all OS functions (not libraries), change sem_wait() to nxsem_wait().  This will prevent the OS from creating bogus cancellation points and from modifying the per-task errno variable.

    sched/semaphore:  Add the function nxsem_wait().  This is a new internal OS interface.  It is functionally equivalent to sem_wait() except that (1) it is not a cancellation point, and (2) it does not set the per-thread errno value on return.
 2017-10-04 15:22:27 -06:00
Gregory Nutt
42a0796615 Squashed commit of the following: 
sched/semaphore:  Add nxsem_post() which is identical to sem_post() except that it never modifies the errno variable.  Changed all references to sem_post in the OS to nxsem_post().

    sched/semaphore:  Add nxsem_destroy() which is identical to sem_destroy() except that it never modifies the errno variable.  Changed all references to sem_destroy() in the OS to nxsem_destroy().

    libc/semaphore and sched/semaphore:  Add nxsem_getprotocol() and nxsem_setprotocola which are identical to sem_getprotocol() and set_setprotocol() except that they never modifies the errno variable.  Changed all references to sem_setprotocol in the OS to nxsem_setprotocol().  sem_getprotocol() was not used in the OS
 2017-10-03 15:35:24 -06:00
Gregory Nutt
83cdb0c552 Squashed commit of the following: 
libc/semaphore:  Add nxsem_getvalue() which is identical to sem_getvalue() except that it never modifies the errno variable.  Changed all references to sem_getvalue in the OS to nxsem_getvalue().

    sched/semaphore:  Rename all internal private functions from sem_xyz to nxsem_xyz.  The sem_ prefix is (will be) reserved only for the application semaphore interfaces.

    libc/semaphore:  Add nxsem_init() which is identical to sem_init() except that it never modifies the errno variable.  Changed all references to sem_init in the OS to nxsem_init().

    sched/semaphore:  Rename sem_tickwait() to nxsem_tickwait() so that it is clear this is an internal OS function.

    sched/semaphoate:  Rename sem_reset() to nxsem_reset() so that it is clear this is an internal OS function.
 2017-10-03 12:52:31 -06:00
Gregory Nutt
8394f9b60f Squashed commit of the following: 
configs/z80sim and xtrs:  Serial driver lower halfs ioctl methods should return a negated errno value, not set the errno variable.

    drivers/wireless:  CC1101 driver not permitted to set errno.

    drivers/sensors:  LIS331DL driver not permitted to set errno.

    drivers/lcd: ILI9341 initialize method not permitted to set errno,

    drivers/serial: 16550 UART driver IOCTL method must not set errno; it must return a negated errno value.
 2017-09-30 12:59:33 -06:00
Gregory Nutt
bd027b9019 serial.c: Use common TX drain logic when closing a driver as with the TCDRAIN IOCTL. 2017-08-01 10:14:24 -06:00
Gregory Nutt
4f0238339e serial.c: Finish implementation of TCDRAIN. Based partly on logic from Sebastien Lorquet. 2017-08-01 07:39:08 -06:00
Sebastien Lorquet
e22912db37 drivers/serial/serial.c: Add support for TCFLUSH 2017-08-01 06:30:52 -06:00
Gregory Nutt
0de294a586 Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they. 2017-05-11 13:35:56 -06:00
Gregory Nutt
d3b9f5b37f Syslog buffering: Use IOBs to buffer data, not an on-stack buffer 2017-05-10 17:36:08 -06:00
Stefan Kolb
591f35be87 I discovered a problem in the file drivers/serial/serial.c concerning the function uart_close(…). In the case that a serial device is opened with the flag O_NONBLOCK the function uart_close(…) blocks until all data in the buffer is transmitted. The function close(…) called on an handle opened with O_NONBLOCK should not block. The problem occurred with a CDC/ACM device. 2017-05-10 07:59:58 -06:00
Gregory Nutt
e3c9e9e0b8 UART 16550: Missing left parenthesis in function prototype. This is Bitbucket Issue #41. 2017-04-20 06:50:11 -06:00
Jussi Kivilinna
e2702cbe4e STM32F7: fix UART7 and UART8 IFLOWCONTROL options 2017-04-06 08:46:24 -06:00
Gregory Nutt
b4ff7391f8 Convert more drivers to use use irq_attach with argument. 2017-02-27 10:44:13 -06:00
Mark Schulte
b3222bbc8a irq_dispatch: Add argument pointer to irq_dispatch 
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
 2017-02-27 06:27:56 -06:00
Gregory Nutt
08c001196b drivers/: Remove all explicit use of 'hidden' macro _info. Code must never use this directly. Code must always use a debug macro such as info which is basic on _info but can be appropriately filtered. 2017-01-15 13:00:50 -06:00
Gregory Nutt
4fcbe8e410 drivers: Disable priority inheritance on all semaphores used for signaling 2016-11-03 11:00:47 -06:00
Gregory Nutt
47b043df1e drivers/serial.c: Make sure that priority inheritance is not enabled for the signaling semaphores used in the serial driver. 2016-11-03 08:16:59 -06:00
Gregory Nutt
79c8bb7ddf Updae more comments 2016-07-27 08:03:09 -06:00
Gregory Nutt
59e0c4411f Correct some comments 2016-07-26 13:39:20 -06:00
Gregory Nutt
0c7f5d62e4 More comments 2016-07-26 12:13:30 -06:00
Gregory Nutt
084d200a66 PTY: Cosmetic, update some comments 2016-07-26 10:09:35 -06:00
Gregory Nutt
eaaa69da0a serial.c: Fix an error in FIONWRITE calculation 2016-07-26 06:47:53 -06:00
Gregory Nutt
e0b4a10dfa drivers/serial/pty.c, serial.c, usbdev/cdcacm.c, include/nuttx/fs/ioctl.h: Fix FIONWRITE and add FIONSPACE. All implementations of FIONWRITE were wrong. FIONWRITE should return the number of bytes waiting in the outgoing send queue, not the free space. Rather, FIONSPACE should return the free space in the send queue. 2016-07-25 14:06:32 -06:00
Gregory Nutt
9a8c3572db serial.c: Fix a race condition noted by Stefan Kolb. Between the test if the TX buffer is full and entering a critical section, bytes may be removed from the TX buffer making the wait unnecessary. The unnecessary wait is an inefficiency, but not really a problem. But with USB CDC/ACM it can be a problem because the entire TX buffer may be emptied when we lose the race. If that happens that uart_putxmitchar() can hang waiting for data to be removed from an empty TX buffer. 2016-07-22 07:47:59 -06:00
Gregory Nutt
10fff9011a Move include/nuttx/configdata.h to include/nuttx/mtd/configdata.h 2016-07-21 13:34:54 -06:00
Gregory Nutt
4b4dbc79a2 Move driver related prototypes out of include/nuttx/fs/fs.h and into new include/drivers/drivers.h 2016-07-20 13:15:37 -06:00
Gregory Nutt
2cacc6204a Kconfig: If Pseudo-terminals are enabled, then pipes must be selected as well 2016-07-19 14:26:40 -06:00
Gregory Nutt
318f34fb7d Psuedo-terminal pipe size is now configurable 2016-07-19 14:26:41 -06:00
Gregory Nutt
56582e2263 Update some comments 2016-07-19 10:40:23 -06:00
Gregory Nutt
8bf4684de8 Update some comments 2016-07-19 09:53:52 -06:00
Gregory Nutt
a4458c5016 PTY: Fix a race condition in test-fifo-empty-before-read logic 2016-07-19 06:45:02 -06:00
Gregory Nutt
d9fbf4c90f Eliminate some warnings 2016-07-18 11:27:06 -06:00
Gregory Nutt
1660329d06 Rename up_rnginitialize to devrandom_register 2016-07-18 10:55:37 -06:00
Gregory Nutt
6194467c13 PTY: Fix termios read input processing.. what was I thinking? Also, if some data was read, pty_read() should not block on the empty FIFO. 2016-07-18 08:00:56 -06:00
Gregory Nutt
ded91e451b PTY: Add TERMIOS support. 2016-07-16 10:43:44 -06:00
Alan Carvalho de Assis
8fa14b8fed Fix poll-related compile issues introduced with recent PTY changes 2016-07-16 07:03:38 -06:00
Gregory Nutt
6a75f2df89 PTY: Add some encode to reduce the likely of misinterpreting the return value of the file open() method 2016-07-15 17:13:21 -06:00
Gregory Nutt
4b1553d3ad PTY: Fix some tricky issues. Now seems to be working. A lot more testing is needed 2016-07-15 14:29:32 -06:00
Gregory Nutt
4b5149b244 PTY: Fix a few errors from early testing 2016-07-15 14:09:02 -06:00
Gregory Nutt
9ecd558002 Add the correct implementation of the file_poll() function 2016-07-15 11:34:08 -06:00
Gregory Nutt
f7f7036db8 Update some comments 2016-07-15 11:15:33 -06:00
Gregory Nutt
4d1b811117 PTY: Add support for the poll() method. 2016-07-15 10:07:33 -06:00
Gregory Nutt
95555a0199 PTY: Add ioctls to support locking and unlocking of the slave. LIBC: Add implementation of unlockpt() 2016-07-15 09:39:33 -06:00
Gregory Nutt
6139860c0b PTY: Added PTY IOCTL command definitions. Add support for TIOCGPTN. LIB: Implement ptsname() and ptsname_r() 2016-07-15 08:33:47 -06:00
Gregory Nutt
bcbe9806d2 In SUSv1 model, need to tried the PTY driver pair as unlinked if the master closes its reference 2016-07-15 07:33:48 -06:00
Gregory Nutt
14c216107a PTY: Need to free PTMX minor number is slave is unlinked 2016-07-15 07:22:36 -06:00
Gregory Nutt
e50646336b Add PTY header files 2016-07-15 07:19:42 -06:00
Gregory Nutt
7fa5093fff PTYs prototypes hooked into build and configuration system (as EXPERIMENTAL) 2016-07-15 06:48:10 -06:00
Gregory Nutt
ccf4bfafcb Prototype versions of ptmx/pty suppoprt. Still under developement; not yet hooked into build or configuration system. 2016-07-14 20:20:48 -06:00
Heath Petersen
dc72e16625 handle when CONFIG_SERIAL_UART_ARCH_IOCTL is not enabled 2016-07-12 06:50:58 +00:00
Gregory Nutt
29a99bef0f serial/Kconfig: Oops put SERIAL_CONSOLE definition within if-endif condition. Better outside 2016-06-20 17:49:16 -06:00
Gregory Nutt
9434d3e945 There is now one-and-only-one copy of syslog_putc. It is in the SYSLOG channel logic and can redirect syslog output as needed. All former syslog_putc versions were renamed and the corresponding SYSLOG device initializaiton now calls syslog_channel() 2016-06-19 13:03:20 -06:00
Gregory Nutt
0c8c7fecf0 Add _ to the beginning of all debug macros to avoid name collisions 2016-06-16 12:33:32 -06:00
Gregory Nutt
efb02f2ef1 drivers/: Change some nerr() ERRORS to nwarn() WARNINGS. Anomolous network evernts are not errors. 2016-06-12 08:31:22 -06:00
Gregory Nutt
a1469a3e95 Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err() 2016-06-11 15:50:49 -06:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
fc3540cffe Replace all occurrences of vdbg with vinfo 2016-06-11 11:59:51 -06:00
Paul A. Patience
f8f7b7582c Silence some warnings 2016-05-26 14:06:13 -04:00
Gregory Nutt
9ec104834a Remove CONFIG_USARTn_ISUART 2016-05-25 11:21:48 -06:00
Gregory Nutt
c089a2f241 Rename CONFIG_ARCH_HAVE_OTHER_UART to CONFIG_OTHER_UART_SERIALDRIVER 2016-05-25 10:48:33 -06:00
Gregory Nutt
e2e6ce3f1b Rename CONFIG_ARCH_HAVE_SCIn to CONFIG_SCIn_SERIALDRIVER 2016-05-25 10:46:55 -06:00
Gregory Nutt
2a87741e72 Rename CONFIG_ARCH_HAVE_UARTn to CONFIG_UARTn_SERIALDRIVER 2016-05-25 10:45:01 -06:00
Gregory Nutt
249a2e48e5 Rename CONFIG_ARCH_HAVE_USARTn to CONFIG_USARTn_SERIALDRIVER 2016-05-25 10:39:23 -06:00
Gregory Nutt
050f544782 Fix typo in variable name in serial BREAK logic. Review other serial implementations for similar naming problems. 2016-05-05 11:30:47 -06:00
Gregory Nutt
0fb035f76b Standardize some naming in code section comments 2016-02-21 18:09:04 -06:00
Gregory Nutt
2244ed46bc nuttx/drivers: Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section() 2016-02-14 07:32:58 -06:00
Gregory Nutt
ce2a0b6b51 Eliminate a warning 2016-01-06 10:05:39 -06:00
Gregory Nutt
ab9d124528 serial: Remove confusing inline functions. Correct attribution for serial DMA logic 2015-11-15 08:39:01 -06:00
Gregory Nutt
7f1ac36194 Serial driver: Move serial DMA logic to a separate file 2015-11-15 07:58:08 -06:00
Max Neklyudov
d54a39832a Implement high level DMA infrastructure for serial devices 2015-11-12 14:16:19 -06:00
Gregory Nutt
cf14f8d1b5 drivers/: Fixes to spacing and alignement 2015-10-10 10:41:00 -06:00
Gregory Nutt
0b12dbf95d Fix some spacing problems 2015-10-04 15:04:00 -06:00
Paul A. Patience
3b89eabd50 Correct #if to #ifdef when the macro can be undefined. Fix bug in AT24XX driver: it should compare AT24XX_ADDRSIZE to 2. 2015-09-01 13:52:29 -04:00
Anton D. Kachalov
1bb74504a8 Add support for custom platform IOCTL on UART 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-08-03 15:32:51 +03:00
Anton D. Kachalov
a07ed262b4 Revert "Two more places there THRE is used with inverted sense" 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-08-03 13:21:01 +03:00
Anton D. Kachalov
2fa6237b49 Revert THRNE-patch. The problem was in u16550_putc 
Regarding to:
https://github.com/tanzilli/ariag25-linux-2.6.39/blob/ariag25/drivers/tty/serial/8250.c#L1584
https://github.com/tanzilli/ariag25-linux-2.6.39/blob/ariag25/drivers/tty/serial/8250.c#L1913

When UART_LSR_THRE bit is set, then we ready to transmit more.

Current u16550_putc loops while UART_LSR_THRE bit is set. This logic have to be inverted.

Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-08-03 13:19:55 +03:00
Anton D. Kachalov
274b7986be [drivers/serial/uart_16550] Typo fix in data bits setup 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-07-31 20:19:54 +03:00
Gregory Nutt
fb82061bf7 Two more places there THRE is used with inverted sense 2015-07-29 20:42:49 -06:00
Gregory Nutt
8935ff34d5 16550 UART Driver: Add a configuration option to indicate the the THR empty bit is inverted. This is the the case for the moxART SoC. Based comments from Anton D. Kachalov 2015-07-29 16:31:21 -06:00
Gregory Nutt
342f5fe33d Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
e4d2822af8 Make some file section headers more consistent with standard 2015-04-08 07:15:32 -06:00
Gregory Nutt
b83cea4f99 Back out 70cb75adaf3243478276cebf367c5f47c4725715 2015-03-13 10:40:09 -06:00
Gregory Nutt
3473bb1635 drivers/serial: Report correct number of bytes free in serial buffer with FIONWRITE. From Jussi Kivilinna. 2015-03-13 07:22:43 -06:00
Gregory Nutt
6f335dc6c6 STM32 SPI: The source clock for SPI 4,5, and 6 should be PCLK2, not PCLK1 (for F411, F427, and F429). Per David Sidrane. 2015-02-07 13:59:45 -06:00
Gregory Nutt
52aeabb4b2 Cosmetic changes 2015-01-02 13:59:47 -06:00
Gregory Nutt
5ee81c0d50 Serial: Allow serial console selection even if /dev/console is disabled: There can still be a serial console with no file system at all 2014-12-28 15:23:05 -06:00
Gregory Nutt
089578319a STM32 Serial: PX4 HW workarround for flaky STM32 RTS. From David Sidrane 2014-12-27 18:58:18 -06:00
Gregory Nutt
33f7151cd9 Remove STM32-specific RX flow control logic from the upper level serial driver to the lower level STM32 serial driver 2014-12-27 09:45:45 -06:00
Gregory Nutt
32fd858dc6 Serial RX Flow Control: Fix a bunch of compile problems introduced into unbuilt, conditioned out logic 2014-12-27 08:15:41 -06:00
Gregory Nutt
2fadd0da4b Eliminate an unnecessary calculation in the serial RX flow control logic 2014-12-27 08:00:48 -06:00
Gregory Nutt
aefde565d3 Serial Upper Half: Add watermarks to RX flow control logic 2014-12-27 07:43:06 -06:00
Gregory Nutt
623757d77c Update TODO list and add REVISIT comment 2014-12-13 08:44:28 -06:00
Gregory Nutt
d09bb13833 In case a thread is doing a blocking operation (e.g. read()) on a serial 
device, while it is being terminated by pthread_cancel(), then
uart_close() gets called, but the semaphore (dev->recv.sem in the above
example) is still blocked.

This means that once the serial device is opened next time, data will
arrive on the serial port (and driver interrupts handled as normal), but
the received characters never arrive in the reader thread.

This patch addresses the problem by re-initializing the semaphores on the
last uart_close() on the device.
 2014-12-13 08:07:21 -06:00
Gregory Nutt
0ec5043a4e Add an interface definition and upper half driver for a discrete joystick device 2014-11-27 17:42:16 -06:00
Gregory Nutt
5d231b25f0 SAMA5D3 Xplained: Add an apps/examples/bridge configuration 2014-11-20 16:24:30 -06:00
Gregory Nutt
5120d745fd Fix some typos 2014-10-29 10:48:50 -06:00
Gregory Nutt
6c9f325e1e Move selection for CONFIG_SERIAL_TERMIOS out of MCU Kconfigs to common drivers/serial/Kconfig. Add CONFIG_ARCH_HAVE_SERIAL_TERMIOS to indicate if an MCU supports TERMIOS 2014-10-27 11:31:16 -06:00
Gregory Nutt
37e08c3b49 The olimex-efm32g880f128-stk now defaults to use LEUART1 as the serial console. Also fixes lots of compile bugs from the original LEUART checkin 2014-10-21 11:38:51 -06:00
Gregory Nutt
d13c9a08b9 EFM32: Add configuration support for LEUARTs 2014-10-21 09:37:02 -06:00
Gregory Nutt
47d55c28dc Mostly cosmetic changes 2014-09-04 10:28:38 -06:00
Gregory Nutt
320707fdfa SAMA5: Fix bugs in timer/counter interrupts and one-shot timer 2014-08-10 10:47:38 -06:00
Gregory Nutt
b5efb9dd77 Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna 2014-05-08 09:01:14 -06:00
Gregory Nutt
7594d8b8cf Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna 2014-05-08 09:00:33 -06:00
Gregory Nutt
7ad2ace833 Costmetic changes to some comments 2014-04-14 16:36:07 -06:00
Gregory Nutt
3a1324741a More trailing whilespace removal 2014-04-13 14:32:20 -06:00
Gregory Nutt
cbdc9155ab SAMA5: Add support for DBGU. Xplained board now uses DBGU for the serial console 2014-04-01 11:24:15 -06:00
Gregory Nutt
113d5a2a81 Correct an error introduced in this file in very recent commits 2014-03-06 15:33:02 -06:00
Gregory Nutt
17a96f6e1e configs/us7032evb1/ostest: Configuration converted to use the kconfig-frontends tools 2014-03-06 09:17:11 -06:00
Gregory Nutt
ba6fe788ea SAMA5 serial: Restore logic to minimize TX interrupts. Oddly, seems to improve ADC stability 2013-10-26 16:02:07 -06:00
Gregory Nutt
0ab6d8382f SAMA5 TC: Debug instrumentation 2013-10-26 14:03:30 -06:00
Gregory Nutt
bc46b447dc Fix all occurrences of "the the" in documentation and comments 2013-08-27 09:40:19 -06:00
Gregory Nutt
dd3c682443 SAMA5: Some improvements to the HSCMI card removal/insertion logic 2013-08-11 11:13:11 -06:00
Gregory Nutt
82b528e0c8 Serial FIONREAD, FIONWRITE, and TERMIOS I/O processing from Mike Smith, Andrew Tridgell, and and Lorenz Meier 2013-08-10 19:14:05 -06:00
Gregory Nutt
968b2553cd Rearrange configuration settings so that ARCH_HAVE_SDIO is moved to higher, sharable level 2013-08-10 09:06:53 -06:00
Gregory Nutt
77e1c27005 Update SAMA5D3x-EK board configuration to support on-board UART connections, LEDs, and push buttons 2013-07-24 12:27:12 -06:00
Gregory Nutt
9cf942bcb2 SAM3/4: Loop counter for PLL delay must be volatile or it may get optimized away 2013-06-13 16:18:25 -06:00
Gregory Nutt
3edec35c51 Add flow control support to the STM32 serial driver; Fix some issues with UART2 and 5. From Lorenz Meier and Mike Smith 2013-06-06 14:49:14 -06:00
Gregory Nutt
420ca1b256 configs/freedom-kl25z: Change references to NuTiny to Freedom KL25Z 2013-04-25 20:09:15 -06:00
Gregory Nutt
b630e6a153 Useless TIOCSERGSTRUCT logic in most serial drivers is not compiled unless CONFIG_DEBUG and CONFIG_SERIAL_TIOCSERGSTRUCT are defined 2013-04-25 15:52:48 -06:00
patacongo
0bfa1b75e2 Add support for STM32 F427/437 chips. From Mike Smith 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5807 42af7a65-404d-4744-a932-0658087f49c3
 2013-04-01 13:43:31 +00:00
patacongo
ebf9960deb convert Kwikstik K40 configurations to use kconfig-frontends tools 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5784 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-25 17:33:41 +00:00
patacongo
730dc3e202 Add missing implementation of O_NONBLOCK for serial writes 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5755 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-18 16:04:29 +00:00
patacongo
d621681866 Some NuTiny-SDK-NUC120 size reduction; All serial driver vtables should be static const 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5683 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-27 22:24:49 +00:00
patacongo
ad447766ff Fix a readline bug. If a NUL is received, it would return end-of-file 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5633 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-10 00:46:27 +00:00
patacongo
cf411bec51 A spurious checkin... I just want to improve some code structure 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5597 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-02 01:50:34 +00:00
patacongo
11aa231cf0 drivers/serial.c: Fix some race conditions. Some bad things code happen if we lost a USB connection at certain times. 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5596 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-02 00:29:55 +00:00
patacongo
9a05ccdbbc Last minute 6.25 change 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5595 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-01 22:51:34 +00:00
patacongo
1b94639432 Misc clean; mark assertions as non-returning; allow toolchain prefix to be overriden from make command line 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5591 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-31 23:29:34 +00:00
patacongo
cdbbfaa464 Fix readline return value; Add support for removable serial devices 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5589 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-31 16:52:20 +00:00
patacongo
df9a72994f configs/xtrs/nsh and pashello now use kconfig-frontends and build Windows native 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5422 42af7a65-404d-4744-a932-0658087f49c3
 2012-12-09 17:34:53 +00:00
patacongo
620d1c9a33 configs/xtrs/ostest converted to kconfig-frontend and Windows native 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5421 42af7a65-404d-4744-a932-0658087f49c3
 2012-12-08 23:21:34 +00:00
patacongo
a93d7eb69e Shenzhou board is first to use ONLY Kconfig for configuration 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5114 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-08 13:56:21 +00:00
patacongo
08ef9d0367 Add Kconfig settings for the LPC17xx 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5094 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-05 17:20:19 +00:00
patacongo
e3f1d80ed6 Refactor serial configuratin; AVR teensy Kconfig now builds 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5092 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-05 12:45:35 +00:00
patacongo
59588247bf Kconfig changes + back out part of last check-in: The 2STOP setting must be integer 0/1, not boolean 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5086 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-04 15:28:56 +00:00
patacongo
70b1c3f2f6 Make the lib/ subdirectory build more like other directories 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5025 42af7a65-404d-4744-a932-0658087f49c3
 2012-08-13 22:27:06 +00:00
patacongo
b7a1b00c08 drivers/serial/serial.c open, read, write, and poll methods will not return a short transfer or an EINTR error if a signal is received while waiting (only) 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5022 42af7a65-404d-4744-a932-0658087f49c3
 2012-08-12 17:37:04 +00:00
patacongo
5b7341f5db drivers/, drivers/pipes, and drivers/serial file clean-up 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4944 42af7a65-404d-4744-a932-0658087f49c3
 2012-07-15 14:56:25 +00:00
patacongo
be3ebf6201 More Kconfig files 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4632 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-18 19:17:30 +00:00
patacongo
e91f97ada2 drivers/serial: Don't disable Rx interrrupts on each character 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4631 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-18 17:08:27 +00:00
patacongo
e828b09381 Kconfig updates 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4606 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-14 13:31:14 +00:00
patacongo
0830ef18dd Minor kconfig fixes 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4600 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-13 15:04:05 +00:00
patacongo
1dc41e329b Kconfig update 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4599 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-13 14:27:44 +00:00
patacongo
330b89ca0e Add kconfig documentation 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4567 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-06 16:45:52 +00:00
patacongo
4b8c0c41c8 Adding skeleton Kconfig files (part 1 of 2) 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4564 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-06 15:49:35 +00:00
patacongo
1c1dee962d A couple of fixes to common and STM32 serial handling to fix some data overrun conditions 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4550 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-02 01:02:41 +00:00
patacongo
34b7ebdf68 Move serial header files to include/nuttx/serial 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4500 42af7a65-404d-4744-a932-0658087f49c3
 2012-03-21 19:47:23 +00:00
patacongo
2fe4ad52f8 Move file-system header files to include/nuttx/fs 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4499 42af7a65-404d-4744-a932-0658087f49c3
 2012-03-21 18:01:07 +00:00
patacongo
e69cbad010 Add logic so that a RAM log can be used in place of a console device 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4380 42af7a65-404d-4744-a932-0658087f49c3
 2012-02-11 03:50:52 +00:00
patacongo
8d01473fff Move lib/stdio/lib_fgets.c to apps/system/readline; simplify fgets(); use readline instead of fgets in NSH 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4356 42af7a65-404d-4744-a932-0658087f49c3
 2012-02-01 19:07:57 +00:00
patacongo
ee04a259db ADS7843E driver is code complete 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4018 42af7a65-404d-4744-a932-0658087f49c3
 2011-10-04 17:08:59 +00:00
patacongo
95e415d274 Re-architect FAT data structures to support long file names 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3780 42af7a65-404d-4744-a932-0658087f49c3
 2011-07-13 13:30:38 +00:00
patacongo
62d94bb3d6 Add wchar_t type; Add LPC17xx CAN driver from Lzyy; Fix serial bug reported by Lzyy 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3775 42af7a65-404d-4744-a932-0658087f49c3
 2011-07-12 16:36:45 +00:00
patacongo
2ad95a1d10 Correct error handling in the case of an overrun error in the serial driver 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3774 42af7a65-404d-4744-a932-0658087f49c3
 2011-07-12 14:29:08 +00:00
patacongo
fe7a627a50 Update documents and comments 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3723 42af7a65-404d-4744-a932-0658087f49c3
 2011-06-18 15:49:59 +00:00
patacongo
1ba2240762 Add initial CC1101 wireless logic from Uros 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3617 42af7a65-404d-4744-a932-0658087f49c3
 2011-05-16 15:09:39 +00:00
patacongo
fff9db3c57 First set of changes to incorporate the RGMP port 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3595 42af7a65-404d-4744-a932-0658087f49c3
 2011-05-12 17:42:01 +00:00
patacongo
a3c96a8df6 Add QEMU NSH configuration 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3358 42af7a65-404d-4744-a932-0658087f49c3
 2011-03-10 04:13:44 +00:00
patacongo
046aa70b2a Fix basic QEMU port 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3357 42af7a65-404d-4744-a932-0658087f49c3
 2011-03-10 00:58:10 +00:00
patacongo
9634f25391 Changing NuttX fixed size type names to C99 standard names -- things will be broken for awhile 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2343 42af7a65-404d-4744-a932-0658087f49c3
 2009-12-15 14:25:14 +00:00
patacongo
9535a28d7a Eliminate some hcs12 compile errors/warnings 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2329 42af7a65-404d-4744-a932-0658087f49c3
 2009-12-13 15:13:37 +00:00
patacongo
9b04ee217e Move some drivers to separate subdirectories 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2156 42af7a65-404d-4744-a932-0658087f49c3
 2009-10-18 13:52:21 +00:00