sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
44,753 Commits 1 Branch 0 Tags 291 MiB
8a80a853b7
Commit Graph

607 Commits

Author SHA1 Message Date
Gregory Nutt
21859af6d9 Add check of return value in drivers affected by last change: Report the error on a failure to set the bit order. 2016-08-08 08:40:37 -06:00
Gregory Nutt
7d4cb73bd6 STM32 and EFM32 SPI drivers adopted an incompatible conventions somewhere along the line. The set the number of bits to negative when calling SPI_SETBITS which had the magical side-effect of setting LSB first order of bit transmission. This is not only a hokey way to pass control information but is supported by no other SPI drivers. 
This change three things:  (1) It adds HWFEAT_LSBFIRST as a new H/W feature.  (2) It changes the implementations of SPI_SETBITS in the STM32 and EFM32 derivers so that negated bit numbers are simply errors and it adds the SPI_HWFEATURES method that can set the LSB bit order, and (3) It changes all calls with negative number of bits from all drivers: The number of bits is now always positive and SPI_HWFEATUREs is called with HWFEAT_LSBFIRST to set the bit order.
 2016-08-08 08:28:13 -06:00
Gregory Nutt
9965cbe428 drivers/: Review and correct some stylistic inconsistencies 2016-08-07 09:43:48 -06:00
Alan Carvalho de Assis
10a7698112 drivers/wireless/mfrc522.c: Fix memory free command 2016-08-07 07:34:01 -06:00
Alan Carvalho de Assis
bfac90f720 Add MFRC522 RFID ISO14443 and Mifare transceiver driver 2016-08-06 08:45:52 -06:00
Gregory Nutt
1660329d06 Rename up_rnginitialize to devrandom_register 2016-07-18 10:55:37 -06:00
Gregory Nutt
2a751068e6 Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err(). 2016-06-20 12:44:38 -06:00
Gregory Nutt
43eb04bb8f Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
Gregory Nutt
2b445ddccc Remove lowsyslog(). The new syslog() includes all of the functionality of lowsyslog(). No longer any need for two interfaces. 2016-06-20 08:57:08 -06:00
Gregory Nutt
0c8c7fecf0 Add _ to the beginning of all debug macros to avoid name collisions 2016-06-16 12:33:32 -06:00
Gregory Nutt
7d0950bb22 net/: Change some nerr() ERRORS to nwarn() WARNINGS. Anomolous network events are not errors. 2016-06-12 07:09:37 -06:00
Gregory Nutt
e18e2b351b Need a info() macro mapping 2016-06-11 19:05:32 -06:00
Gregory Nutt
f12da847d8 drivers/wireless: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-11 19:03:57 -06:00
Gregory Nutt
a1469a3e95 Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err() 2016-06-11 15:50:49 -06:00
Gregory Nutt
e99301d7c2 Rename *lldbg to *llerr 2016-06-11 14:55:27 -06:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
fc3540cffe Replace all occurrences of vdbg with vinfo 2016-06-11 11:59:51 -06:00
Sebastien Lorquet
0ef10e6d0e fix atmel driver for new 802154 radio api 2016-06-01 13:11:49 +02:00
Sebastien Lorquet
b0afc4807d synthetic commit to import ieee branch from old repo 2016-06-01 12:12:21 +02:00
Gregory Nutt
1f8212679c NRF24L01: Fix backward calculation of relative frequency. Noted by Henry Zhang 2016-04-15 07:07:22 -06:00
Paul A. Patience
c62bb9beb1 Fix issues detected by cppcheck 2016-03-22 15:46:47 -04:00
Gregory Nutt
1c31e10397 NRF2410L: Add missing conditional logic in vtable initialization 2016-03-08 16:11:08 -06:00
Gregory Nutt
0970d43ab8 Cosmetic changes to comments 2016-02-28 07:48:16 -06:00
Gregory Nutt
d777110cbe Eliminate a warning 2016-02-27 07:27:45 -06:00
Sebastien Lorquet
dc7adfa817 drivers/wireless/ieee802154/Kconfig 
drivers/wireless/ieee802154/Make.defs
    Changes to the build infrastructure to include the mrf24j40 driver

include/nuttx/spi/spi.h
    Define a IEEE SPI device

include/nuttx/wireless/ieee802154/ieee802154_radio.h
    This file defines the API of a IEEE 802.15.4 radio device, to be used by the future common MAC 802.15.4 layer

drivers/wireless/ieee802154/mrf24j40.c
drivers/wireless/ieee802154/mrf24j40.h
    The main MRF24J40 IEEE 802.15.4 radio driver

include/nuttx/wireless/ieee802154/mrf24j40.h
    This file allows instanciation of the MRF24j40 driver from board configurations
 2016-02-26 18:39:27 -06:00
Gregory Nutt
1ecb092e51 Add wireless/ieee802154 to the build 2016-02-26 17:27:58 -06:00
Gregory Nutt
cfe018e991 Rename CONFIG_WIRELESS to CONFIG_DRIVERS_WIRELESS 2016-02-26 16:50:26 -06:00
Gregory Nutt
309beae2cd Move drivers/ieee802154 to drivers/wireless/ieee802154; rename include/nuttx/net ieee802154 to 6lowpan.h 2016-02-26 15:03:16 -06:00
Gregory Nutt
0fb035f76b Standardize some naming in code section comments 2016-02-21 18:09:04 -06:00
Gregory Nutt
2244ed46bc nuttx/drivers: Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section() 2016-02-14 07:32:58 -06:00
Gregory Nutt
bf8120d51d Fix some odd logic in CC3000 semaphore handling. Noted by Vladimir Komendantskiy 2016-02-10 09:50:28 -06:00
Gregory Nutt
564a1ce606 Cosmetic clean-up of comments 2016-01-24 08:21:55 -06:00
Gregory Nutt
7edf921c5e Remove CONFIG_SPI_OWNBUS: Now it is not just a good idea, it is the law 2016-01-23 18:54:36 -06:00
Gregory Nutt
f6e49caba8 All SPI-based device drivers needs to call SPI_HWFEATURES() with zero in order to co-exist with drivers that use H/W features 2016-01-23 16:18:13 -06:00
Gregory Nutt
63301fe213 Cosmetic changes from review of last pull request 2016-01-17 14:52:11 -06:00
Janne Rosberg
fb1bf10a3d add pn532 support 
Signed-off-by: Janne Rosberg <janne.rosberg@offcode.fi>
 2016-01-17 22:17:49 +02:00
Gregory Nutt
c955cdccd9 Move rivers/wireless/cc3000/security.c to crypto/aes.c; move include/nuttx/wireless/cc3000/security.h to include/nuttx/crypto/aes.h 2015-11-16 13:31:02 -06:00
Gregory Nutt
cdc646ae68 Another typo introduced in previous commit 2015-10-10 12:31:31 -06:00
Gregory Nutt
5f9c47a83f drivers/wireless: Fixes to spacing and alignement 2015-10-10 11:51:32 -06:00
Gregory Nutt
863ded3584 Standardize the width of all comment boxes in C header files 2015-10-03 07:45:15 -06:00
Gregory Nutt
16b32bbadd Standardize the width of all comment boxes in C files 2015-10-03 07:25:53 -06:00
Gregory Nutt
0f90500f72 Standardize the width of all comment boxes in header files 2015-10-02 17:48:24 -06:00
Gregory Nutt
5b51a9fcdd Standardize the width of all comment boxes in C files 2015-10-02 17:43:18 -06:00
Pierre-noel Bouteville
8651e0f2ca CC3300: Add const to pointers in arguments to wlan_connect; remove an unused function prototype 2015-09-09 16:34:37 -06:00
Gregory Nutt
afdb3c751a Fix typos from a previous commit 2015-09-08 12:45:30 -06:00
Gregory Nutt
a7e43c7fdb Eliminate some warnings 2015-09-08 09:20:18 -06:00
Gregory Nutt
48d7930631 CC3300: Eliminate some compile time warnings 2015-09-08 07:37:19 -06:00
Gregory Nutt
342f5fe33d Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
0476d8168a More missing semicolons after DEBUGASSERT 2015-05-27 13:32:39 -06:00
Gregory Nutt
e4d2822af8 Make some file section headers more consistent with standard 2015-04-08 07:15:32 -06:00
Gregory Nutt
e2e7c791c1 Refreshed Spark Configurations 2015-02-28 15:44:58 -06:00
Gregory Nutt
d6704a1cd7 Suffer the consequences of moving struct timeval to its correct location 2015-02-15 15:18:35 -06:00
Gregory Nutt
f24520acbb Backout use of named initializers. Not C99 2015-01-31 12:29:21 -06:00
Gregory Nutt
64ce7563f2 CC3000: Fix yet another typo in last two commitsgit diff I should not be doing this when I have the flugit diff 2014-12-18 16:27:46 -06:00
Gregory Nutt
49a22f1ccb CC3000: Oops. Fix an error in the last commit 2014-12-18 07:39:55 -06:00
Gregory Nutt
2fe506d70c CC3000 Fix: Data can be unaligned. When dereferences as an input ntosh(), a bad value is returned. Reported by Alan Carvalho de Assis 2014-12-18 07:18:00 -06:00
Gregory Nutt
e42f7b552f This commit is a set of patches 02/11 through 03/11 correcting issues with the CC3000 networking (01/11 was committed separated). Among these 10 patches: 
03/11: CC3000 driver was getting stuck at recv() when remote host closed connection and application tried to read data from remotely shutdown socket. This patch adds proper handling for remotely closed socket event.

07/11: Socket state initialization was done in 'register', while it should be initialized in 'open' and deinitialized in 'close'. Old way caused problems when device is closed, power-cycled and then reopened as old socket state was left enabled.

08/11: Select thread was getting stuck after 'close, power-cycle, reopen', since selectsem was not properly setup and cleaned up.

09/11 'maxFD' was not properly reset in select worker and not checked for before calling cc3000_select().

10/11: After wlan_stop()/cc3000_close(), irqsem was left with count '-1'. Therefore on next wlan_start()/cc3000_open(), initial value for irqsem was wrong. Additional repeated wlan_start()/wlan_stop() decreased irqsem value further. Obviously this causes driver not to function correctly and freeze.

Patch moves initialization and destruction of waitsem, irqsem and readysem to cc3000_open/cc3000_close.

All are: Signed-off-by: Jussi Kivilinna <jussi.kivilinna@haltian.com>
 2014-11-28 08:52:52 -06:00
Gregory Nutt
5f0343bed9 Use usleep instead of usdelay as CONFIG_BOARD_LOOPSPERMSEC might not be calibrated correctly and CC3000 is fine with longer wait. 
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@haltian.com>
 2014-11-28 08:16:30 -06:00
Gregory Nutt
9ac09db800 More fixes to problems noted by cppcheck. Some are kind of risky; some are real bugs. 2014-11-25 13:46:14 -06:00
Gregory Nutt
d7d759f7a7 Update everything under nuttx/drivers to use the corrected syslog interfaces 2014-10-08 10:18:58 -06:00
Gregory Nutt
1780810d3d Rename kmalloc to kmm_malloc for consistency 2014-08-31 17:26:36 -06:00
Gregory Nutt
54fa3b0b59 Rename kfree to kmm_free for consistency with other naming conventions 2014-08-31 17:04:02 -06:00
Gregory Nutt
9cd1ddada4 Rename kmemalign to kmm_memalign and krealloc to kmm_realooc for consistency with other naming 2014-08-31 15:27:37 -06:00
Gregory Nutt
2a509d560f CC3000: Fix build when POLL is enabled. From Jussi Kivilinna. 2014-05-21 07:37:46 -06:00
Gregory Nutt
b584ecb967 CC3000: Fix a race condition in start-up of unsoliced_thread. From Jussi Kivilinna 2014-05-21 07:32:32 -06:00
Gregory Nutt
b2d26436de Configuration has CC3000_SPI_MODE settings but source uses CONFIG_CC3000_SPIMODE. From Jussi Kivilinna 2014-05-21 07:20:09 -06:00
Gregory Nutt
a9d89b5442 Correct SPI mode for CC3000 is CPOL=0 CHPA=1. From Jussi Kivilinna 2014-05-21 07:17:46 -06:00
Gregory Nutt
972c4cbab5 Nucleo F401RE: Remove PX4 cruft that can in with the port 2014-04-22 12:18:08 -06:00
Gregory Nutt
3a1324741a More trailing whilespace removal 2014-04-13 14:32:20 -06:00
Gregory Nutt
056aed1274 Make sure that there is one space between while and condition 2014-04-12 13:09:48 -06:00
Gregory Nutt
6092b5813a Numerous updates to the CC3000 driver from David Sidrane 2014-02-18 14:16:51 -06:00
Gregory Nutt
91b002a043 Many changes to reduce complaints from CppCheck. Several latent bugs fixes, but probably some new typos introduced 2014-02-10 18:08:49 -06:00
Gregory Nutt
0d0c3e66fb Updates to sparck configuration from David Sidrane 2013-11-01 11:40:19 -06:00
Gregory Nutt
890417a0f4 Missing files from last CC3000 driver update from David Sidrane 2013-10-31 09:00:05 -06:00
Gregory Nutt
85e90b0064 Updated CC3000 driver from David Sidrane 2013-10-30 14:37:13 -06:00
Gregory Nutt
6b8c1cc480 CC3000 driver updates from David Sidrane 2013-10-30 10:50:26 -06:00
Gregory Nutt
77c0c6c2d6 CC3000 driver updates from David Sidrane 2013-10-27 18:54:10 -06:00
Gregory Nutt
70a191159b drivers/wireless/cc3000: CC3000 driver update from David Sidrane 2013-10-26 17:42:08 -06:00
Gregory Nutt
607acec781 CC3000 driver update from David Sidrane 2013-10-25 16:23:53 -06:00
Gregory Nutt
ba5e6669d0 CC3000 driver update from David Sidrane 2013-10-24 08:03:32 -06:00
Gregory Nutt
76764003a5 Add logic to enable DEBUG_NET if NET=n but WL_CC3000=y 2013-10-23 11:48:57 -06:00
Gregory Nutt
4cf9540563 CC3000 driver updates from David Sidrane 2013-10-23 09:07:32 -06:00
Gregory Nutt
6fda497bc1 Updated Spark/cc3000 files from David Sidrane 2013-10-18 17:14:58 -06:00
Gregory Nutt
8ad32012ab New touchscreen scaling algorithm for the case where measured X values vary with y position (and vice versa) 2013-10-17 12:07:14 -06:00
Gregory Nutt
8cd7eea7ad CC3000 driver changes from David Sidrane 2013-10-16 13:18:53 -06:00
Gregory Nutt
4e44868f12 CC3000 driver changes from David Sidrane 2013-10-16 11:59:26 -06:00
Gregory Nutt
48a8364267 CC3000 driver changes from David Sidrane 2013-10-16 11:59:22 -06:00
Gregory Nutt
e555cfaa5b Updated CC30000 example from David Sidrane 2013-10-16 07:29:25 -06:00
Gregory Nutt
ce6368793a Some restructing of the CC3000 build 2013-09-04 16:40:57 -06:00
Gregory Nutt
64f1c78367 CC3000 driver updates from Alan Carvalho de Assis 2013-09-04 09:45:59 -06:00
Gregory Nutt
29d4748b1b Initial cut of a driver for the TI CC3000 network module with support on the Freescale KL25Z board from Alan Carvalho de Assis 2013-09-03 14:59:48 -06:00
Gregory Nutt
09faaccc02 Created new directories to hold SPI-related files 2013-07-01 08:11:54 -06:00
Gregory Nutt
0e37ec1bfc Add NSRF42L01 driver. From Laurent Latil 2013-06-01 08:03:55 -06:00
patacongo
2def0d877d A few native window build updates 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5387 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-25 20:58:39 +00:00
patacongo
4ee266d94b Centralized the definition of the INCDIR script in tools/Config.mk 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5346 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-13 20:24:30 +00:00
patacongo
50321df42d Remove executable property from source and make files 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5146 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-13 18:46:10 +00:00
patacongo
7a9457bb07 Email address change in nuttx/ 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5145 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-13 18:32:24 +00:00
patacongo
cc5b31a286 Add support for the TI PGA11x amplifier/multiplexer 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4977 42af7a65-404d-4744-a932-0658087f49c3
 2012-07-25 18:41:10 +00:00
patacongo
330b89ca0e Add kconfig documentation 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4567 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-06 16:45:52 +00:00
patacongo
4b8c0c41c8 Adding skeleton Kconfig files (part 1 of 2) 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4564 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-06 15:49:35 +00:00
patacongo
a87259ebc6 Add support for multiplexed SDIO pins from Uros 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3898 42af7a65-404d-4744-a932-0658087f49c3
 2011-08-19 16:51:04 +00:00
patacongo
8501188ee2 More TSC2007 driver updates 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3830 42af7a65-404d-4744-a932-0658087f49c3
 2011-07-30 15:31:23 +00:00
patacongo
c472fe3913 Add support for STM3210E-EVAL button interrupts 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3750 42af7a65-404d-4744-a932-0658087f49c3
 2011-07-07 16:20:35 +00:00
patacongo
1ba2240762 Add initial CC1101 wireless logic from Uros 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3617 42af7a65-404d-4744-a932-0658087f49c3
 2011-05-16 15:09:39 +00:00
patacongo
9a9ebcd417 Mostly cosmetic changes from Uros 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3575 42af7a65-404d-4744-a932-0658087f49c3
 2011-05-07 19:22:15 +00:00
patacongo
5867444e73 Fix RTL driver MAC address 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3529 42af7a65-404d-4744-a932-0658087f49c3
 2011-04-21 18:17:41 +00:00
patacongo
8da8486fcb Updates from Uros 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3527 42af7a65-404d-4744-a932-0658087f49c3
 2011-04-20 13:32:49 +00:00