Gregory Nutt
8bd9cfe038
Squashed commit of the following:
...
arch/arm: Remove support for CONFIG_ARMV7M_CMNVECTOR. It is now the only vector support available. Also remove CONFIG_HAVE_CMNVECTOR. That no longer signifies anything."
arch/arm/src/stm32: This commit removes support for the dedicated vector handling from the STM32 architecture support. Only common vectors are now supported.
2018-06-20 12:30:37 -06:00
Gregory Nutt
e4922ed9f0
Remove instructures to CD to tools/ before running ./configure.sh
...
Squashed commit of the following:
configs/*/README.txt: Replace each occurrence of './configure.sh' with 'tools/configure.sh'
configs/*/README.txt: Remove 'cd ..' after each './configure.sh'
configs/*/README.txt: Remove 'cd -' after each './configure.sh'
configs/*/README.txt: Remove 'cd tools' before each './configure.sh'
configs/README.txt: Remove instruction to CD tools/ before running configure.sh.
2018-05-09 11:41:46 -06:00
Louis Mayencourt
bd81664b31
configs/stm32f746g-disco: Add stm32f746g-disco Ethernet configuration. Add USART1 support (connected to the USB virtual serial port)
2018-02-19 14:38:22 -06:00
Gregory Nutt
873de7b480
configs/*/README.txt: Update to the new URL for obtaining the ARM toolchain.
2017-08-13 07:18:19 -06:00
Gregory Nutt
5f31999b75
Trivial fix to spacing
2017-07-27 11:50:59 -06:00
Titus von Boxberg
28eab902d0
No FSMC, only FMC for STM32F7
2017-07-27 18:27:01 +02:00
Titus von Boxberg
006fa75171
corrected typos and inconsistencies for USB OTG configuration
2017-07-18 11:43:53 +02:00
Gregory Nutt
44545781e5
configs/: Remove dangline space at the end of lines in .txt files.
2017-06-28 13:18:41 -06:00
Gregory Nutt
9aac1dd44d
configs: Remove all setenv.bat files. Remove all references to setenv.sh and setenv.bat from all config README files.
2017-04-26 10:12:13 -06:00
Gregory Nutt
3dbdb3bb31
CONFIG_SDIO_DMA: Was been defined in several low-level architecute Kconfig files, but used at the highest levels in the code. Both are bad and both are fixed with this commit
2017-01-31 11:52:00 -06:00
Gregory Nutt
9ac00a355f
Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots.
2017-01-31 09:16:01 -06:00
Gregory Nutt
4742999e45
Remove references to non-existent kostest from README.txt
2016-06-28 14:45:30 -06:00
Gregory Nutt
ac81ecf65b
Remove configs/stm32f746g-disco/netnsh. It does not build. Probably a corrupted, hand-editted defconfig file.
2016-06-28 14:43:58 -06:00
Gregory Nutt
1377452394
Refresh all ARM configurations
2016-06-23 15:59:14 -06:00
Gregory Nutt
63b1eb09e6
Centralize definitions associated with CONFIG_DEBUG_CAN
2016-06-15 15:45:27 -06:00
Gregory Nutt
1cdc746726
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
2016-06-11 14:14:08 -06:00
Gregory Nutt
650ba80ac0
All setenv.sh files updated to use the path to the ARM 4.0 2015q2 toolchain
2015-07-31 08:40:40 -06:00
Gregory Nutt
8451cbc3cd
Update README
2015-07-21 15:32:57 -06:00
Gregory Nutt
796cb1e13c
STM32F746G-Disco: Add support for a protected build. C++ initialization logic moved to apps/platform where it belongs
2015-07-21 11:16:44 -06:00
Gregory Nutt
03ab4e8c75
Update README.txt file
2015-07-21 07:58:02 -06:00
Gregory Nutt
2e09cf3112
STM32F746-DISCO: Enable the NSH telnet sessions
2015-07-20 10:54:47 -06:00
Gregory Nutt
ba105349a4
STM32F746G-DISCO: Add a network-enabled NSH configuratino for network testing
2015-07-19 14:13:26 -06:00
Gregory Nutt
4cb2464e77
STM32 F7 disco: Enabled I-/D-Cache, DTCM, recallibrate delay loop. Update README.txt
2015-07-19 10:40:32 -06:00
Gregory Nutt
1b341a30d8
STM32 F7: Update configuration variable naming
2015-07-16 19:48:39 -06:00
Gregory Nutt
0850780a03
Add initial support for the STM32 F7 Discovery board
2015-07-16 11:41:40 -06:00
