net_chksum_adjust is used for fast checksum adjustment after modifying some fields in a network packet. Will be used in NAT.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
devif/ipv6_input.c: In function 'ipv6_input':
devif/ipv6_input.c:59:33: error: 'TCPIPv6BUF' undeclared (first use in this function); did you mean 'IPv6BUF'?
59 | #define PAYLOAD ((FAR uint8_t *)TCPIPv6BUF)
| ^~~~~~~~~~
devif/ipv6_input.c:302:14: note: in expansion of macro 'PAYLOAD'
302 | payload = PAYLOAD; /* Assume payload starts right after IPv6 header */
|
Signed-off-by: chao an <anchao@xiaomi.com>
Error: route/net_del_ramroute.c:94:9: error: format specifies type 'unsigned long' but the argument has type 'unsigned int' [-Werror,-Wformat]
HTONL(match->target), HTONL(match->netmask));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/github/workspace/sources/nuttx/include/debug.h:232:23: note: expanded from macro 'ninfo'
^
/github/workspace/sources/nuttx/include/debug.h:102:43: note: expanded from macro '_none'
do { if (0) syslog(LOG_ERR, format, ##__VA_ARGS__); } while (0)
~~~~~~ ^~~~~~~~~~~
/github/workspace/sources/nuttx/include/netinet/in.h:233:17: note: expanded from macro 'HTONL'
^
/github/workspace/sources/nuttx/include/endian.h:63:25: note: expanded from macro '__swap_uint32'
^
Error: route/net_del_ramroute.c:94:31: error: format specifies type 'unsigned long' but the argument has type 'unsigned int' [-Werror,-Wformat]
HTONL(match->target), HTONL(match->netmask));
~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
/github/workspace/sources/nuttx/include/debug.h:232:23: note: expanded from macro 'ninfo'
^
/github/workspace/sources/nuttx/include/debug.h:102:43: note: expanded from macro '_none'
do { if (0) syslog(LOG_ERR, format, ##__VA_ARGS__); } while (0)
~~~~~~ ^~~~~~~~~~~
/github/workspace/sources/nuttx/include/netinet/in.h:233:17: note: expanded from macro 'HTONL'
^
/github/workspace/sources/nuttx/include/endian.h:63:25: note: expanded from macro '__swap_uint32'
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
cunittest error case: protocol invalid need return 123(EPROTONOSUPPORT)
now return 106(EAFNOSUPPORT)
inet_setup will check type ande protocol
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Fixed by commit:
| net: remove pvconn reference from all devif callback
|
| Do not use 'pvconn' argument to get the connection pointer since
| pvconn is normally NULL for some events like NETDEV_DOWN.
| Instead, the connection pointer can be reliably obtained from the
| corresponding private pointer.
Signed-off-by: chao an <anchao@xiaomi.com>
1.Add cellular link layer enum definition and register flow
2.Add ioctl flow to set cellular NICs parameters
Signed-off-by: luojun1 <luojun1@xiaomi.com>
Signed-off-by: chao an <anchao@xiaomi.com>
Issue description:
usrsock will wait for state.recvsem forever because no event triggers
state.recvsem post operation when connect operation in server side is
non-blocking.
Solution:
trigger state.recvsem post operation after receive USRSOCK_EVENT_SENDTO_READY.
Signed-off-by: liangchaozhong <liangchaozhong@xiaomi.com>
igmp/igmp_input.c: In function 'igmp_input':
igmp/igmp_input.c:201:31: warning: the comparison will always evaluate as 'false' for the address of 'grpaddr' will never be NULL [-Waddress]
201 | if (igmp->grpaddr == 0)
| ^~
In file included from nuttx/include/nuttx/net/netstats.h:67,
from igmp/igmp_input.c:53:
nuttx/include/nuttx/net/igmp.h:132:12: note: 'grpaddr' declared here
132 | uint16_t grpaddr[2]; /* 32-bit Group address */
| ^~~~~~~
Signed-off-by: chao an <anchao@xiaomi.com>
fix build warning on GCC 12.2.0
In file included from local/local_fifo.c:25:
In function 'local_hd_name',
inlined from 'local_open_receiver' at local/local_fifo.c:593:3:
local/local_fifo.c:128:12: warning: '%s' directive output may be truncated writing up to 107 bytes into a region of size 97 [-Wformat-truncation=]
128 | CONFIG_NET_LOCAL_VFS_PATH "/%s" LOCAL_HD_SUFFIX, inpath);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
local/local_fifo.c: In function 'local_open_receiver':
local/local_fifo.c:128:40: note: format string is defined here
128 | CONFIG_NET_LOCAL_VFS_PATH "/%s" LOCAL_HD_SUFFIX, inpath);
| ^~
In function 'local_hd_name',
inlined from 'local_open_receiver' at local/local_fifo.c:593:3:
local/local_fifo.c:127:3: note: 'snprintf' output between 15 and 122 bytes into a destination of size 109
127 | snprintf(outpath, LOCAL_FULLPATH_LEN - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
128 | CONFIG_NET_LOCAL_VFS_PATH "/%s" LOCAL_HD_SUFFIX, inpath);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: chao an <anchao@xiaomi.com>
f_domain is used to determine protocol family when CONFIG_NET_IPv4 and CONFIG_NET_IPv6 are both defined, but not correctly used in ipv4_dev_forward because of typo (there's not a config named CONFIG_NET_IPv5) which may cause IPv4 packets to be forwarded as IPv6.
Signed-off-by: wengzhe <wengzhe@xiaomi.com>
NuttShell (NSH) NuttX-10.3.0
ap> ifconfig
=================================================================
Program received signal SIGSEGV, Segmentation fault.
==3920365==ERROR: AddressSanitizer: global-buffer-overflow on address 0x57fb4f2a at pc 0x57177067 bp 0xf1ffebb8 sp 0xf1ffeba8
READ of size 1 at 0x57fb4f2a thread T0
...................
| #10 0xf7ac4339 in __asan::__asan_report_load1 (addr=1476087594) at ../../../../../src/libsanitizer/asan/asan_rtl.cpp:117
| #11 0x57177067 in strncmp (cs=0x57fb4f2a "", ct=0x582d36e0 "stat", nb=4) at string/lib_strncmp.c:40
| #12 0x57f3b467 in netprocfs_opendir (relpath=0x57fb4f26 "net", dir=0xf1ffed80) at procfs/net_procfs.c:398
| #13 0x572b3ae1 in procfs_opendir (mountpt=0xf4602c20, relpath=0x57fb4f26 "net", dir=0xf1ffed80) at procfs/fs_procfs.c:625
| #14 0x572879ff in open_mountpoint (inode=0xf4602c20, relpath=0x57fb4f26 "net", dir=0xf1ffed80) at vfs/fs_dir.c:127
...................
Signed-off-by: chao an <anchao@xiaomi.com>
I noticed that the conn instance will leak during stress test,
The close work queued from tcp_close_eventhandler() will be canceled
by tcp_timer() immediately:
Breakpoint 1, tcp_close_eventhandler (dev=0x565cd338 <up_irq_restore+108>, pvpriv=0x5655e6ff <getpid+12>, flags=0) at tcp/tcp_close.c:71
(gdb) bt
| #0 tcp_close_eventhandler (dev=0x565cd338 <up_irq_restore+108>, pvpriv=0x5655e6ff <getpid+12>, flags=0) at tcp/tcp_close.c:71
| #1 0x5658bf1e in devif_conn_event (dev=0x5660bd80 <g_sim_dev>, flags=512, list=0x5660d558 <g_cbprealloc+312>) at devif/devif_callback.c:508
| #2 0x5658a219 in tcp_callback (dev=0x5660bd80 <g_sim_dev>, conn=0x5660c4a0 <g_tcp_connections>, flags=512) at tcp/tcp_callback.c:167
| #3 0x56589253 in tcp_timer (dev=0x5660bd80 <g_sim_dev>, conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_timer.c:378
| #4 0x5658dd47 in tcp_poll (dev=0x5660bd80 <g_sim_dev>, conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_devpoll.c:95
| #5 0x5658b95f in devif_poll_tcp_connections (dev=0x5660bd80 <g_sim_dev>, callback=0x565770f2 <netdriver_txpoll>) at devif/devif_poll.c:601
| #6 0x5658b9ea in devif_poll (dev=0x5660bd80 <g_sim_dev>, callback=0x565770f2 <netdriver_txpoll>) at devif/devif_poll.c:722
| #7 0x56577230 in netdriver_txavail_work (arg=0x5660bd80 <g_sim_dev>) at sim/up_netdriver.c:308
| #8 0x5655999e in work_thread (argc=2, argv=0xf3db5dd0) at wqueue/kwork_thread.c:178
| #9 0x5655983f in nxtask_start () at task/task_start.c:129
(gdb) c
Continuing.
Breakpoint 2, tcp_update_timer (conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_timer.c:178
(gdb) bt
| #0 tcp_update_timer (conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_timer.c:178
| #1 0x5658952a in tcp_timer (dev=0x5660bd80 <g_sim_dev>, conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_timer.c:708
| #2 0x5658dd47 in tcp_poll (dev=0x5660bd80 <g_sim_dev>, conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_devpoll.c:95
| #3 0x5658b95f in devif_poll_tcp_connections (dev=0x5660bd80 <g_sim_dev>, callback=0x565770f2 <netdriver_txpoll>) at devif/devif_poll.c:601
| #4 0x5658b9ea in devif_poll (dev=0x5660bd80 <g_sim_dev>, callback=0x565770f2 <netdriver_txpoll>) at devif/devif_poll.c:722
| #5 0x56577230 in netdriver_txavail_work (arg=0x5660bd80 <g_sim_dev>) at sim/up_netdriver.c:308
| #6 0x5655999e in work_thread (argc=2, argv=0xf3db5dd0) at wqueue/kwork_thread.c:178
| #7 0x5655983f in nxtask_start () at task/task_start.c:129
Since a separate work will add 24 bytes to each conn instance,
but in order to support the feature of asynchronous close(),
I can not find a better way than adding a separate work,
for resource constraints, I recommend the developers to enable
CONFIG_NET_ALLOC_CONNS, which will reduce the ram usage.
Signed-off-by: chao an <anchao@xiaomi.com>
1. separate command catagory of bt/pktradio from wireless ioctl
2. Remove commoand count limit to support vendor command
Signed-off-by: chao an <anchao@xiaomi.com>
* net/netdev/netdev_ioctl.c:
(netdev_ifr_ioctl): The ioctl SIOCGIFHWADDR provides the hardware
address (e.g., Ethernet MAC, etc.) of a network interface. It is
based on Linux. (BSD-based systems don't have this ioctl.) The Linux
implementation sets sa_family to ARPHRD_ETHER for Ethernet and IEEE
802.11 interfaces [1]. NuttX was setting it to NET_SOCK_FAMILY for
these interface types as well as 6LoWPAN and PKTRADIO; this was
incorrect and also the value of NET_SOCK_FAMILY varies based on
Kconfig settings. Correcting this to ARPHRD_ETHER for Ethernet and
IEEE 802.11 and ARPHRD_IEEE802154 for 6LoWPAN and PKTRADIO.
References:
[1] 'man 7 netdevice' on Linux.
* net/netdev/netdev_ioctl.c:
(netdev_ifr_ioctl): The ioctl SIOCSIFHWADDR sets the hardware address
(e.g., Ethernet MAC, etc.) of a network interface. Radio devices may
have different lengths of hardware addresses, such as
NET_6LOWPAN_EADDRSIZE (8), NET_6LOWPAN_SADDRSIZE (2), or
RADIO_MAX_ADDRLEN (8). Also, Kconfig CONFIG_PKTRADIO_ADDRLEN allows
the user to set any arbitrary size. Note that while the sister ioctl
SIOCGIFHWADDR "get hardware address" copies
`dev->d_mac.radio.nv_addrlen` bytes, SIOCSIFHWADDR was copying
NET_6LOWPAN_ADDRSIZE bytes unconditionally. Depending on which radio
is used, this could be incorrect. Fixing it to use
`dev->d_mac.radio.nv_addrlen` for SIOCSIFHWADDR as well. Also adding
DEBUGASSERT to ensure this is within bounds of source and
destination of the copy.
