Gregory Nutt
8c001f6807
Merged in paulpatience/nuttx (pull request #21 )
...
Add SSD1351 OLED controller support
2015-08-28 17:01:24 -06:00
Paul A. Patience
01b68e90d0
Add SSD1351 OLED controller support
2015-08-28 18:37:01 -04:00
Gregory Nutt
8811681d7f
networking: Big performance improvement for local loopback driver
2015-08-27 11:05:53 -06:00
Gregory Nutt
63071a563a
Costmetic changes
2015-08-27 10:38:43 -06:00
Gregory Nutt
b1e09d4847
net/socket and net/tcp: Fix a problem in whent there are multiple network devices. Polls were being sent to all TCP sockets before. This is not good because it means that packets may sometimes be sent out on the wrong device. That is inefficient because it will cause retransmissions and bad performance. But, worse, when one of the devices is not Ethernet, it will have a different MSS and, as a result, incorrect data transfers can cause crashes. The fix is to lock into a single device once the MSS is locked locked down.
2015-08-27 09:06:46 -06:00
Gregory Nutt
3bcdb218ff
Networking: Get rid of the tcp_mss macro. It is confusing and only obfuscates what is really going on
2015-08-27 08:39:17 -06:00
Gregory Nutt
007aabc46f
Fix a badly formatted comment
2015-08-26 19:18:04 -06:00
SaeHie Park
a268e0aeb9
Fix a typo from an earlier commit
2015-08-26 18:12:58 -06:00
Gregory Nutt
7a168a791f
Networking: Fix loopback device MTU
2015-08-26 10:33:44 -06:00
Juha Niskanen
70620d3dd6
rivers/rwbuffer: Fix some logic errors
2015-08-26 07:18:50 -06:00
Gregory Nutt
32de036490
Local loopback: Set the IFF_UP flags during initialization because the local loopback device is always up
2015-08-25 20:09:12 -06:00
Saehie ParK
e6dbd3d903
Networking: Fix network device name assignment logic for the case of the local loopback device. There is only one local loopback network device and it is unnumbered
2015-08-25 20:03:25 -06:00
Gregory Nutt
fb53c29292
Merged in rnouse/nuttx (pull request #20 )
...
Compilation warning fixup
2015-08-25 15:29:37 -06:00
Anton D. Kachalov
b125c36849
Field `d_sndlen' is unsigned. It is always >= 0.
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-08-26 00:16:52 +03:00
Anton D. Kachalov
8d57be2b6f
Eliminate compilation warnings
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-08-26 00:14:50 +03:00
SaeHie Park
e983e547e1
Networking: Correct return value from psock_tcp_accept(). From SaeHie Park
2015-08-25 07:15:21 -06:00
Gregory Nutt
79aa3d40b0
Kconfig: CONFIG_NET_MULTILINK and CONFIG_NET_MULTINIC must be support if the loopback device and any real network device are selected
2015-08-25 06:51:15 -06:00
Gregory Nutt
a2c0068011
Fix some IPv6 loopback device problems
2015-08-24 17:27:38 -06:00
Gregory Nutt
3018dc31e5
Network local loopback: Another structural simplication
2015-08-24 16:08:17 -06:00
Gregory Nutt
9d5a86753e
Update TODO list
2015-08-24 15:52:14 -06:00
Gregory Nutt
6158086dd4
Update some comments
2015-08-24 15:41:45 -06:00
Gregory Nutt
eea69cf6e3
Networking: Local loopback, fix a error in last commit + fix a bad functional partitioning
2015-08-24 15:23:09 -06:00
Gregory Nutt
4d040d572a
Networking: Eliminate recursion from the local loopback driver
2015-08-24 15:16:03 -06:00
Gregory Nutt
d99e217906
Urefresh submodule
2015-08-24 14:26:12 -06:00
Gregory Nutt
3c5f817513
Networking: Local loopback is basically functional and is no longer EXPERIMENTAL
2015-08-24 13:58:57 -06:00
Gregory Nutt
933d74e5c1
Networking: With these changes, I can ping the local loopback device from the simulator
2015-08-24 13:49:12 -06:00
Gregory Nutt
0b012c7978
Fix some initial loop back device compilation errors; mark configuration as EXPERIMENTAL
2015-08-24 11:29:54 -06:00
Gregory Nutt
ccb24e1766
drivers/net: Add a basic prototype for a local loopback device
2015-08-24 11:03:36 -06:00
Gregory Nutt
07bdff9ef7
Networking: Add NetDB support for the local loopback device
2015-08-24 10:08:26 -06:00
Gregory Nutt
e21501c699
Merge remote-tracking branch 'origin/master' into localhost
2015-08-24 08:29:36 -06:00
Gregory Nutt
569ff602ea
Networking: Remove bogus references to PPP as a link layer protocol
2015-08-24 08:29:07 -06:00
Gregory Nutt
ea2fafb024
Add definitions to support a local loopback link layer
2015-08-24 08:25:08 -06:00
Gregory Nutt
3743d3d84a
Add configuration options for forthcoming st25fl1 devices
2015-08-24 08:00:39 -06:00
Gregory Nutt
47bab42498
Update submodules
2015-08-23 17:21:34 -06:00
Gregory Nutt
2e9b81ee83
Update submodule
2015-08-23 12:17:31 -06:00
Gregory Nutt
6fc449f689
Moving canned_symtab from nuttx/libc to apps/system
2015-08-23 11:33:29 -06:00
Alan Carvalho de Assis
9b036311c0
Missing comma in spi.h header file
2015-08-23 11:06:32 -06:00
Gregory Nutt
4723ff5563
Update README
2015-08-23 10:46:11 -06:00
Gregory Nutt
f12692b78f
Extend canned symbol table logic to work in protected build mode
2015-08-23 10:44:04 -06:00
Pavel Pisa
9ab3f03153
Define some symbol export conditions, correct errno and add sleep and usleep. From Pavel Pisa
2015-08-23 09:05:40 -06:00
Pavel Pisa
81a257eeb0
Optional canned symtab inclusion to the build. When option CONFIG_LIBC_SYMTAB is selected and symbol table file libc/symtab/canned_symtab.inc is prepared then application can use system provided complete symbol table. The option has substantial effect on system image size. Mainly code/text. If loading of applications at runtime is not planned do not select this. From Pavel Pisa.
2015-08-23 08:38:58 -06:00
Pavel Pisa
ad5448d9b4
mksymtab: declare g_symtab array as conts to occupy RO section (Flash).
2015-08-23 08:17:30 -06:00
Gregory Nutt
64cff54894
Upate submodules
2015-08-22 10:16:51 -06:00
Gregory Nutt
7f3a36fb78
Update ChangeLog
2015-08-21 18:36:12 -06:00
Pavel Pisa
23035ca68d
[PATCH] gethostbyname(): correct returned address format when DNS is used. The hostent.h_addr_list should point to raw in_addr or in6_addr as defined in the standard. Original implementation used that
...
for numeric addresses but for DNS lookup returned pointer to whole sockaddr_in or sockaddr_in6.
getaddrinfo() should be preferred in a long term perspective. Return of complete addresses from the lookup would be better in such case but it requires significant changes anyway - multiple addresses support and most probably dynamic memory allocation which is bad for many RT applications. So gethostbyname() is sufficient for most applications now.
Signed-off-by: Pavel Pisa <ppisa@pikron.com>
2015-08-21 18:33:03 -06:00
Gregory Nutt
0b2fbd7a2c
Fix a DEBUGASSERTion
2015-08-21 12:33:14 -06:00
Gregory Nutt
89b5ef8d35
wdogs: Fix counting of free, pre-allocated wdog timers. The could could get decremented below zero in some situations
2015-08-21 11:30:22 -06:00
Pavel Pisa
12b1c04508
recvfrom(): Correct wait for new data when NET_UDP_READAHEAD is enabled. Fix size accounting when recvfrom_udpreadahead() sets state.rf_recvlen == -1. I have not checked if data are accumulated to the right position in the buffer however.
...
Signed-off-by: Pavel Pisa <ppisa@pikron.com>
2015-08-21 09:15:06 -06:00
Max Neklyudov
622c5c9aa6
Another TUN driver fix from Max Neklyudov
2015-08-21 07:40:13 -06:00
Gregory Nutt
2a81a76c33
Update ChangeLog
2015-08-20 07:56:20 -06:00
