Gregory Nutt
5f9bcfd5bf
Trivial changes from review of last PR
2016-06-09 09:36:06 -06:00
Gregory Nutt
03c44c3583
Merged in marten_svanfeldt/nuttx-public/for_upstream/is25 (pull request #44 )
...
Added driver of IS25xP SPI flash devices
2016-06-09 09:30:34 -06:00
Marten Svanfeldt
edeb2eed4e
Added driver of IS25xP SPI flash devices
...
Based on sst25xx driver
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2016-06-09 05:13:06 +02:00
Gregory Nutt
a18dbfda6e
Remove drivers/mtd/flash_eraseall.c. It is not used in the OS and is just a dumb wrapper around the MDIOC_BULKERASE IOCTL call.
2016-06-02 10:44:13 -06:00
Sebastien Lorquet
880b59aa26
Additional configuration option to enable SST26 driver debug output. Using comming FS debug output generates too much output.
2016-05-25 13:43:44 -06:00
Sebastien Lorquet
f4fa4799f7
Add a driver for SST26F spi/qspi flash devices (SPI mode only)
2016-05-10 11:09:15 -06:00
ziggurat29
d3fbd86657
bug in smart.c; return code of smart_scan not checked, can cause success result in failure case, leading to 'dev' pointer being invalid.
2016-04-27 19:33:45 -05:00
Gregory Nutt
e8f0965d35
Mostly cosmetic changes from review of last PR
2016-04-17 14:13:44 -06:00
ziggurat29
1b9d837df3
add MTD support for Micron N25Qxxx family of QSPI flash
2016-04-17 12:20:07 -05:00
Gregory Nutt
84cd720479
FTL: Make it clear the the unlink method has not been implemented
2016-04-15 07:03:28 -06:00
Paul A. Patience
c62bb9beb1
Fix issues detected by cppcheck
2016-03-22 15:46:47 -04:00
Gregory Nutt
3ef25dc49d
AT24xx: Add logic to unregister from the procfs file system if the driver is uninitialized
2016-03-17 09:55:10 -06:00
Max Neklyudov
1951b9df57
Improve m25px driver
2016-03-17 07:37:45 -06:00
Gregory Nutt
7fa0adff83
Fix a misplaced right bracket
2016-03-08 15:33:33 -06:00
Frank Benkert
4d9c41fd57
AT24XX: Correct address calculation in Multi-Block-Read
2016-03-08 15:31:23 -06:00
Gregory Nutt
0fb035f76b
Standardize some naming in code section comments
2016-02-21 18:09:04 -06:00
Gregory Nutt
009e9f76cb
I2C: Fixes/improvements from last massive I2C commits
2016-02-02 07:13:03 -06:00
Gregory Nutt
69ce24c70c
I2C: Remove the setfrequency method from the interface
2016-02-01 16:31:13 -06:00
Gregory Nutt
f9053182d3
I2C: Remove setaddress method
2016-02-01 12:14:31 -06:00
Gregory Nutt
8c9bddf998
I2C: Eliminate the I2C_WRITE and I2C_READ macros
2016-02-01 08:57:22 -06:00
Gregory Nutt
3a781a2d3f
Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s.
2016-01-30 08:36:47 -06:00
Gregory Nutt
ceb415204e
Move include/nuttx/i2c.h to include/nuttx/i2c/i2c_master.h
2016-01-30 08:00:16 -06:00
Gregory Nutt
7edf921c5e
Remove CONFIG_SPI_OWNBUS: Now it is not just a good idea, it is the law
2016-01-23 18:54:36 -06:00
Gregory Nutt
f6e49caba8
All SPI-based device drivers needs to call SPI_HWFEATURES() with zero in order to co-exist with drivers that use H/W features
2016-01-23 16:18:13 -06:00
Gregory Nutt
f348e68069
Update to use 64-bit timer when available
2016-01-21 11:54:26 -06:00
Gregory Nutt
c16648b3fd
Most cosmetic but also includes a fix for a compile problem from Ken Pettit
2015-12-01 12:54:57 -06:00
Gregory Nutt
3af1def49a
Fix an error in a function prototype
2015-11-29 14:42:56 -06:00
Ken Pettit
5821af1bbe
drivers/mtd: Add support for /dev/smart loop device. From Ken Petit
2015-11-28 09:00:26 -06:00
Gregory Nutt
6ff67d3061
Minor changes from code review
2015-11-25 14:57:25 -06:00
Ken Pettit
d4a58af380
drivers/mtd/mtd/mtd_procfs/c and include/nuttx/mtd/mtd.h: Add an interface to un-regiser an MTD procfs entry.
...
drivers/mtd/filemtd.c: New new MTD conversion layer that will convert a regular file (or driver file) to an MTD device. This is useful for testing on the simulation using the hostfs.
From Ken Petit
2015-11-25 14:46:28 -06:00
Gregory Nutt
289b3e281f
drivers/mtd/smart.c: Fix a compile error when CONFIG_MTD_SMART_MINIMIZE_RAM=y
2015-11-22 17:18:43 -06:00
Gregory Nutt
891589b307
drivers/mtd/smart.c: Add some run-time geometry tests
2015-11-22 17:10:42 -06:00
Gregory Nutt
54549ef082
Revert "Add option to specify logical sector size during low level format plus adds some run-time geometry tests. fs/smartfs: Remove the 'mksmartfs()' code from the kernel 'fs'"
...
This reverts commit 96faf0fa3251ca10a17daddc728d931be5a206e0.
2015-11-22 10:15:06 -06:00
Gregory Nutt
64e8f12e2b
Add option to specify logical sector size during low level format plus adds some run-time geometry tests. fs/smartfs: Remove the 'mksmartfs()' code from the kernel 'fs'
...
directory and build.
2015-11-22 10:07:35 -06:00
Gregory Nutt
db2fe45666
Update some comments
2015-11-20 09:55:18 -06:00
Ken Pettit
d30b73be82
W25: Add support for byte write mode. From Ken Petit
2015-11-20 07:34:07 -06:00
Gregory Nutt
1c86c004c4
FLASH progmem memory MTD: Need to register with PROCFS if enabled
2015-11-19 06:57:02 -06:00
Ken Pettit
7b590ec9a2
drivers/mtd/smart.c Fixed SmartFS wear level error that occurs when the logical sector size is too small to save all wear level status bytes in a single sector. Logical sectors 1 and 2 were simply not being allocated and then the read_sector and write_sector routines were failing. From Ken Petit
2015-11-18 18:12:06 -06:00
Ken Pettit
f0f7dd9956
drivers/mtd/smart.c: Fix a Smart wear-leveling bug. From Ken Petit
2015-11-18 07:01:13 -06:00
Ken Pettit
7e58e4c4cf
W25: Fix W25 page read/write logic
2015-11-18 06:56:53 -06:00
Gregory Nutt
e61d51dab3
If multiple AT24xx devices are supported and resources are allocated, then it may also be necessary to free those resource
2015-11-17 08:39:06 -06:00
Gregory Nutt
724901ceb9
Add support for multiple AT24xx EEPROM devices
2015-11-17 07:40:17 -06:00
Gregory Nutt
015429684f
MTD progmem: Fix an address calculation
2015-11-13 11:32:34 -06:00
Gregory Nutt
2706b4f8aa
mtd_progmem.c: Fix calculation of block size
2015-11-13 09:19:25 -06:00
Gregory Nutt
fdb17620a0
Need a prototype for progmem_initialize in include/nuttx/mtd/mtd.h
2015-11-12 16:03:24 -06:00
Gregory Nutt
ef59f83a38
drivers/mtd/mtd_progmem.c: Add an upper-half driver that can be used with any FLASH library that provides the itnerfaces defined in include/nuttx/progmem.h
2015-11-12 13:40:18 -06:00
Gregory Nutt
9f3edd6373
MTD Smart: Remove checks for 64KB erase block size. erasesize was changed to 32-bits in struct mtd_geometry_s
2015-11-11 08:25:03 -06:00
Gregory Nutt
2ff1b173f2
SmartFS: Backout last change. It alters the behavior when it should not. Obviously there is something that I do not understand
2015-11-11 08:15:08 -06:00
Gregory Nutt
08200d8f86
S24FL1: Fix so that the driver compiles with 512 byte block support
2015-11-10 13:34:33 -06:00
Gregory Nutt
eb1191df63
S24FL1: Fix an error in the page write logic
2015-11-10 12:48:29 -06:00
