proxies/PROXY_gettid.c: In function 'gettid':
proxies/PROXY_gettid.c:12:41: error: 'SYS_gettid' undeclared (first use in this function); did you mean 'SYS_getpid'?
12 | return (pid_t)sys_call0((unsigned int)SYS_gettid);
| ^~~~~~~~~~
| SYS_getpid
proxies/PROXY_gettid.c:12:41: note: each undeclared identifier is reported only once for each function it appears in
proxies/PROXY_gettid.c:13:1: warning: control reaches end of non-void function [-Wreturn-type]
13 | }
| ^
CC: proxies/PROXY_mmap.c
Makefile:83: recipe for target 'PROXY_gettid.o' failed
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
Change-Id: Ib4d6e315aa7f17235292dd2d6550458a53bc1596
base/time/time_exploded_posix.cc:190:14: error: ‘struct tm’ has no member named ‘tm_zone’; did you mean ‘tm_mon’?
190 | timestruct.tm_zone = nullptr; // not a POSIX field, so mktime/timegm ignore
| ^~~~~~~
| tm_mon
Change-Id: I9f93e63b50c0692a7a2bfc47abd9d07aa2c8e8db
Signed-off-by: chao.an <anchao@xiaomi.com>
The WS2812 is very common in LED strips as it is an integrated
controller and LED. It is driven by a single data line, but
the timing requirements can be met by using most SPI controllers
and the use of DMA.
This driver has been validated on the nRF52 arch both with a
single LED and a strip of 144.
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
1.Reduce the default size of task_group_s(~512B each task)
2.Scale better between simple and complex application
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ia872137504fddcf64d89c48d6f0593d76d582710
Summary:
- ARCH_GLOBAL_IRQDISABLE was initially introduced for LC823450 SMP
- At that time, i.MX6 (quad Cortex-A9) did not use this config
- However, this option is now used for all CPUs which support SMP
- So it's good timing for refactoring the code
Impact:
- Should have no impact because the logic is the same for SMP
Testing:
- Tested with board: spresense:smp, spresense:wifi_smp
- Tested with qemu: esp32-core:smp, maix-bit:smp, sabre-6quad:smp
- Build only: lc823450-xgevk:rndis, sam4cmp-db:nsh
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
If the buffer to be flushed isn't multipled by the erase size,
let's pad the buffer proactively to avoid the allocation in ftl.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I6d7904aafab93a7886a594319d65826b81cd3cd1
3Change-Id: I88276149cc7826e7416929ca60b06314e96079a6
https://linux.die.net/man/2/epoll_ctl:
EPOLLONESHOT (since Linux 2.6.2)
Sets the one-shot behavior for the associated file descriptor.
This means that after an event is pulled out with epoll_wait(2)
the associated file descriptor is internally disabled and
no other events will be reported by the epoll interface.
The user must call epoll_ctl() with EPOLL_CTL_MOD to
rearm the file descriptor with a new event mask.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I6c0dc93e1cdae0e8cea5b487c7005de2da2c2ec3
Linux Programmer's Manual
NAME
epoll_create, epoll_create1 - open an epoll file descriptor
...
SYNOPSIS
#include <sys/epoll.h>
int epoll_create1(int flags);
...
epoll_create1()
If flags is 0, then, other than the fact that the obsolete
size argument is dropped, epoll_create1() is the same as
epoll_create(). The following value can be included in flags
to obtain different behavior:
EPOLL_CLOEXEC
Set the close-on-exec (FD_CLOEXEC) flag on the new file
descriptor. See the description of the O_CLOEXEC flag in
open(2) for reasons why this may be useful.
https://man7.org/linux/man-pages/man7/epoll.7.html
sync the struct epoll_event define with linux:
Linux Programmer's Manual:
DESCRIPTION
EPOLL_CTL_DEL
...
The event argument describes the object linked to the file descriptor
fd. The struct epoll_event is defined as:
typedef union epoll_data {
void *ptr;
int fd;
uint32_t u32;
uint64_t u64;
} epoll_data_t;
struct epoll_event {
uint32_t events; /* Epoll events */
epoll_data_t data; /* User data variable */
};
https: //man7.org/linux/man-pages/man2/epoll_ctl.2.html
Change-Id: I3ad447b485fd331190e461a198ef7c39301eb1bb
Signed-off-by: chao.an <anchao@xiaomi.com>
to save the preserved space(1KB) and also avoid the heap overhead
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I694073f68e1bd63960cedeea1ddec441437be025
1.Expose the notification through fb_vtable_s::updatearea
2.Incorporate old nx_notify_rectangle into the new updatearea callback
3.Migrate the calle of nx_notify_rectangle to fb_vtable_s::updatearea
Change-Id: Ia3d1f73e8757b2d381586d76ec6adc16c810018d
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Provide functions which get and set the 3A (Auto white balance/Auto
exposure/Auto
focus) parameters.
These are achieved by the ioctl request codes VIDIOC_G_EXT_CTRLS and
VIDIOC_S_EXT_CTRLS which have the following settings:
1. ctrl_class = V4L2_CTRL_CLASS_CAMERA
2. id = V4L2_CID_3A_PARAMETER
Also, provide function which get the 3A adjustment status.
This is achieved by the ioctl request codes VIDIOC_G_EXT_CTRLS which has the
following settings:
1. ctrl_class = V4L2_CTRL_CLASS_CAMERA
2. id = V4L2_CID_3A_STATUS
Fix the following three bugs about ON/OFF control of auto white balance and auto
exposure:
- The returned value of VIDIOC_G_CTRL with id = V4L2_CID_AUTO_WHITE_BALANCE is
different from V4L2 specification.
- Auto exposure is locked if auto white balance lock is requested.
- Auto exposure and auto white balance are locked if auto exposure lock is
requested.
simplify and symmetry the implementation in KERNEL/PROTECTED build
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Iefdeea5f6ef6348c774b2ca9f7e45fe89c0c22dd
Add flags argument into sendto() and recvfrom() APIs for MSG_* flags can
handling in the daemon.
However, MSG_DONTWAIT should process in usrsock, so it unnecessary to pass to
the daemon like O_NONBLOCK.
- Add board specific logic to altair modem dirver
- Fix issue that SPI4 RX frequency violated AC Spec
- Remove dummy buffer in altair driver
- Fix priority of SPI transfer task is too low
- Remove unnecessary configuration
- Modify timeout value for RX ready
- Fix minor bugs
since libc++ declare these function in ctime by:
using ::localtime[_r];
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ic0bb68b44c0cab838ab7cc34baee2aaa3ca8a9b5
avoid the buffer flush as much as possible
Change-Id: I902f374e9540b36bd0b0c77a34cab5014a2c24fc
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Signed-off-by: chao.an <anchao@xiaomi.com>
since exit will be only callable from userspace and change
the 1st argument from "const uint8_t *" to "const char *"
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I86487d57210ab63109148232da71dbc4d60a563b
since sim arch has to use other instance provided by host glibc
also initialize __dso_handle to self as glibc:
https://github.com/bminor/glibc/blob/master/csu/dso_handle.c#L21
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I7531ae58fc4dbe4600bcb2c2c3a6cac021378bc1
since many c++ library implementation reference these symbols by using ::xxx but never
really use them, the declaration avoid the unused code is pulled into the final binary
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Idd7bf9a1e09b77a6b21f900cd3ede08a1cc82d86
Since up_release_stack auto detect whether the memory come from builtin heap
if (ttype == TCB_FLAG_TTYPE_KERNEL)
{
if (kmm_heapmember(dtcb->stack_alloc_ptr))
{
kmm_free(dtcb->stack_alloc_ptr);
}
}
else
{
/* Use the user-space allocator if this is a task or pthread */
if (umm_heapmember(dtcb->stack_alloc_ptr))
{
kumm_free(dtcb->stack_alloc_ptr);
}
}
This reverts commit 124e6ee53d.
1.Remove CONFIG_HAVE_INLINE macro
2.Change the ANSI C function to normal function
3.Other simple non ANSI function to macro
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
add PR_SET_NAME_EXT/PR_GET_NAME_EXT extension to avoid semantic
conflicts, use extened version for pthread_setname_np/pthread_getname_np
Change-Id: I40404c737977a623130dcd37feb4061b5526e466
Signed-off-by: chao.an <anchao@xiaomi.com>
to avoid the similar code spread around each application
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I8967d647eaf2ecae47f29f83e7fa322ef1b42a02
since the current implementation is really a symoblic link not hard link
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I59d30d0a620b0b5714fe91bbe90d4405cf53d187
specified here:
https://pubs.opengroup.org/onlinepubs/009695399/functions/symlink.html
yes, symlink is different from link:
1.symlink create the soft(symbolic) link
2.link create the hard link
but it is suitable to make them same now since vfs doesn't support the
hard link and the soft link in file system level yet.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I3b6e311cc1c826542165c9d93cbe5e078f113684
change the stack pointer type from (uint32_t *) to (void *)
Change-Id: I90bb7d6a9cb0184c133578a1a2ae9a19c233ad30
Signed-off-by: chao.an <anchao@xiaomi.com>
since these two functions is always implemented now
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Iae46fa4d38b680a5d1ce5c314ffcb71af4a3dc95
mallinfo is meant to be API compatible with Linux,
where it's provided by malloc.h.
Make stdlib.h include malloc.h for now. It can be removed
once all users are updated to include malloc.h instead of
stdlib.h.
I have some app code which uses mallinfo(). I want to share
it between platforms. This commit allows me to reduce
platform-ifdefs.
(I think the API actually originated with System V. I don't
remember how it was there though. Anyway, I guess the
compatibility with Linux is more important than System V
these days.)
The video stream driver must be intialized from the board to comply with NuttX
NOTE:
Please remove the initalization from any camera example
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
like other related macro(e.g. INTMAX_MIN, INTMAX_MAX...)
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I8863599960b1a9b1c22ae9c35735a379a4c745b0
The function isn't implemented like other wide printf/scanf
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I0b26bb5174d1a9295fe2454d0e33f8227b8cbf8a
so the lower half driver don't need include the specific board.h
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Icf6638a6865bac42150b5957376e55909f041d40
and let USERLED_LOWER depends on ARCH_HAVE_LEDS instead
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ie03e76d90b61a3d8d3457ccdd319a247b6075fa8
so the lower half driver don't need include the specific board.h
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I2ff5c30049a5c5e8ee90baea56e9f4cb1a8a4f87
The ability to locate data and code in different sections
is becomming critical and common place in cores with multiple
bus matrices and power domains, where DMA can be limited to
a specific memory.
Note that iswalnum etc functions defined in wctype.h, and cwchar uses them.
So include wctype.h to fix libcxx build break.
Change-Id: I0f6b402d817f0927729800bdb8b9fce15e76ec3d
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
and update the related stuff in libs/libc/libc.csv
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Id695a7f07bf18a7b4e526297f9131c75ddb79d30
Move global variable declaration out of include/nuttx/video/video.h and into the file where it is initialized. With some toolchains/environments, declaring globals in header files results in multiply defined symobl errors at link time. This corrects that build problem.
since the user may use math library from toolchain directly
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I67ccc4830403e3c15a84a8f9b1420d9a10894ddf
Block and MTD drivers may be opened and managed as though they were character drivers. But this is really sleight of hand; there is a hidden character driver proxy that mediates the interface to the block and MTD drivers in this case.
fstat(), however, did not account for this. It would report the characteristics of the proxy character driver, not of the underlying block or MTD driver.
This change corrects that. fstat now checks if the character driver is such a proxy and, if so, reports the characteristics of the underlying block or MTD driver, not the proxy character driver.
Make it possible to enqueue and receive full buffers of data with
single call, to avoid call overhead when sending / receiving large amounts
of data.
Also make it possible for the slave device to leave received data in the
controller receive buffers and retrieve it from there by polling
Signed-off-by: Jukka Laitinen <jukka.laitinen@intel.com>
sched_releasetcb() will normally free the stack allocated for a task. However, a task with a custom, user-managed stack may be created using nxtask_init() followed by nxtask_activer. If such a custom stack is used then it must not be free in this many or a crash will most likely result.
This chagne addes a flag call TCB_FLAG_CUSTOM_STACK that may be passed in the the pre-allocted TCB to nxtask_init(). This flag is not used internally anywhere in the OS except that if set, it will prevent sched_releasetcb() from freeing that custom stack.
Add trivial function nxtask_uninit(). This function will undo all operations on a TCB performed by task_init() and release the TCB by calling kmm_free(). This is intended primarily to support error recovery operations after a successful call to task_init() such was when a subsequent call to task_activate fails.
That error recovery is trivial but not obvious. This helper function should eliminate confusion about what to do to recover after calling nxtask_init()
-Move task_init() and task_activate() prototypes from include/sched.h to include/nuttx/sched.h. These are internal OS functions and should not be exposed to the user.
-Remove references to task_init() and task_activate() from the User Manual.
-Rename task_init() to nxtask_init() since since it is an OS internal function
-Rename task_activate() to nxtask_activate since it is an OS internal function
Functions within the OS must never set the errno value. fs_fdopen() was setting the errno value. Now, after some parameter changes, it reports errors via a negated errno integer return value as do most all other internal OS functions.
1. Internal scheduler functions should begin with nxsched_, not sched_
2. Follow the consistent naming patter of https://cwiki.apache.org/confluence/display/NUTTX/Naming+of+OS+Internal+Functions
# clock_systimer -> clock_systime_tick
# clock_systimespec -> clock_systime_timespec
sched_oneshot_extclk -> nxsched_oneshot_extclk
sched_period_extclk -> nxsched_period_extclk
# nxsem_setprotocol -> nxsem_set_protocol
# nxsem_getprotocol -> nxsem_get_protocol
# nxsem_getvalue -> nxsem_get_value
nxsem_initholders -> nxsem_initialize_holders
nxsem_addholder -> nxsem_add_holder
nxsem_addholder_tcb -> nxsem_add_holder_tcb
nxsem_boostpriority -> nxsem_boost_priority
nxsem_releaseholder -> nxsem_release_holder
nxsem_restorebaseprio -> nxsem_restore_baseprio
Some planned name changed were skipped for now because they effect too many files (and would require many hours of coding style fixups).
1. Add missing conditional logic in include/sys/syscall_lookup.h
2. CONFIG_NPTHREAD_KEYS removed from code but was still in sched/Kconfig
3. Refresh all configurations affected by PR 1007
4. syscall/syscall_funclookup.c needs to include nuttx/tls.h
1. Move pthread-specific data files from sched/pthread/ to libs/libc/pthread.
2. Remove pthread-specific data functions from syscalls.
3. Implement tls_alloc() and tls_free() with system calls.
4. Reimplement pthread_key_create() and pthread_key_free() using tls_alloc() and tls_free().
5. Reimplement pthread_set_specific() and pthread_get_specicif() using tls_set_value() and tls_get_value()
- Remove per-thread errno from the TCB structure (pterrno)
- Remove get_errno() and set_errno() as functions. The macros are still available as stubs and will be needed in the future if we need to access the errno from a different address environment (KERNEL mode).
- Add errno value to the tls_info_s structure definitions
- Move sched/errno to libs/libc/errno. Replace old TCB access to the errno with TLS access to the errno.
Move the logic to get TLS information from an inline function to a normal function. For the unaligned case, it is probably too large to be inlined.
Also fixes some minor things from review of previous commits.
The sched_get_stackinfo() interface was just added. However, it occurs to me that it is a dangerous feature and could lead to security problems. In FLAT and PROTECTED modes, if you get access to any other threads stack, you could do harm.
This commit adds some level of security. Basically, it implements these rules:
1. Any thread may query its own stack,
2. A kernel thread may query the stack of any other thread
3. Application threads, however, may query only the stacks of threads within the same task group, i.e., the main thread and any of the child pthreads created with the main thread as a parent or grandparent or great-grandpart ...
The new OS interface, sched_get_stackinfo() combines two pthread-specific interfaces into a single generic interface. The existing pthread_get_stackaddr_np() and pthread_get_stacksize_np() are moved from sched/pthread to libs/libc/pthread.
There are two motivations for this change: First, it reduces the number of system calls. Secondly, it adds a common hook that is going to used for a future implementation of TLS.
Fix it after the following change:
commit bb4458b63f
Author: Ouss4 <abdelatif.guettouche@gmail.com>
Date: Thu Apr 30 19:05:12 2020 +0100
include/sys/stat.h: Per the POSIX standard, the atime, ctime and mtime field
s
have changed their type from time_t to struct timespec.
Sockets are created in two steps:
1. The socket is allocated, then
2. The socket is initialized.
In SMP mode, there is a possibility that a pthread executing one CPU may create a new task while a pthread on another CPU has allocated the socket but not yet initialized it. This commit updates the socket clone test to assure that the socket is both allocated and initailized.
Without the change, it is possible that uninitialized sockets could be cloned, leading to errors later in the newly started task.
This change is needed to be able to fix the warnings on the audio core
and includes the propagation of the fix in the audio.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Adds an initial Nuttx audio driver supporting the Spresense CXD56.
Being a work in progress the driver has a number of limitations:
- Audio playback only, no recording yet.
- Only 16 bit stereo playback is supported.
- In practice only 48kHz playback is supported due to missing SRC.
- Configure driver in "Device Drivers --> Audio Device Support".
arp/arp_notify.c:132:43: warning: for loop has empty body [-Wempty-body]
prev = curr, curr = curr->nt_flink);
^
sixlowpan/sixlowpan_tcpsend.c:806:31: warning: implicit conversion from 'unsigned int' to 'uint16_t' (aka 'unsigned short') changes value from 4294967295 to 65535 [-Wconstant-conversion]
_SO_TIMEOUT(psock->s_sndtimeo));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Numerous warnings like:
ieee802154_getreq.c:93:3: warning: implicit declaration of function 'memcpy' is invalid in C99 [-Wimplicit-function-declaration]
IEEE802154_EADDRCOPY(eaddr, req.attrval.mac.eaddr);
^
nxfonts/nxfonts_cache.c:839:35: warning: for loop has empty body [-Wempty-body]
fcache = fcache->flink);
bluetooth/bluetooth_finddev.c💯11: warning: implicit declaration of function 'memcmp' is invalid in C99 [-Wimplicit-function-declaration]
if (BLUETOOTH_ADDRCMP(dev->d_mac.radio.nv_addr, match->bf_addr))
^
rwbuffer.c:559:7: warning: variable 'ret' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
if (rwb->rhmaxblocks > 0 && rwb->rhnblocks > 0)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Run all files modified by PR 766 through nxstyle and fix any resulting complaints.
NOTE: Numerous "Mixed case identifier" errors in arch/arm/src/cxd56xx/cxd56_gnss.c were not fixed because this problem is of much larger scope than this file.
This commit resolves issue #620:
Remove CONFIG_CAN_PASS_STRUCTS #620
The configuration option CONFIG_CAN_PASS_STRUCTS was added many years ago to support an old version of the SDCC compiler. That compiler is currently used only with the Z80 and Z180 targets. The limitation of that old compiler was that it could not pass structures or unions as either inputs or outputs. For example:
#ifdef CONFIG_CAN_PASS_STRUCTS
struct mallinfo mallinfo(void);
#else
int mallinfo(FAR struct mallinfo *info);
#endif
And even leads to violation of a few POSIX interfaces like:
#ifdef CONFIG_CAN_PASS_STRUCTS
int sigqueue(int pid, int signo, union sigval value);
#else
int sigqueue(int pid, int signo, FAR void *sival_ptr);
#endif
This breaks the 1st INVIOLABLES rule:
Strict POSIX compliance
-----------------------
o Strict conformance to the portable standard OS interface as defined at
OpenGroup.org.
o A deeply embedded system requires some special support. Special
support must be minimized.
o The portable interface must never be compromised only for the sake of
expediency.
o Expediency or even improved performance are not justifications for
violation of the strict POSIX interface
Also, it appears that the current SDCC compilers have resolve this issue and so, perhaps, this is no longer a problem: z88dk/z88dk#1132
NOTE: This commit cannot pass the PR checks because it depends on matching changes to the apps/ directory.
The SDIO interface structure includes fields with names like recvR1 and others. These cause "Mixed case identifier" errors from nxstyle in all places they are uses.
This change performs a mass substition of recvR with recv_r to correct this coding standard violation.
and let other function call the new internal function gethostentbyname_r
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ic6137d6cf03f75d6ed33e23bf04ae74b7264e682
* Check return from nxsem_wait_initialize()
Resolution of Issue 619 will require multiple steps, this part of the first step in that resolution: Every call to nxsem_wait_uninterruptible() must handle the return value from nxsem_wait_uninterruptible properly.
This commit is only for those files under drivers/eeprom.
nxsem_timedwait_uninterruptible() must return -ECANCELED if the thread is canceled:
include/nuttx/semaphore.h: Return if nxsem_wait() returns ECANCELED meaning that the thread waiting for the semaphore has been canceled.
sched/semaphore/sem_timedwait.c: Same change (the inline version is in semaphore.h, the non-inlined version is in sem_tickwait.c).
drivers/sensors/lps25h.c and drivers/wireless/bluetooth/bt_uart_bcm4343x.c: Make sure that the caller deals correctly with the -ECANCELED return value.
Refer to issue 619.
Move the prototype for the internal OS from from sched/sched/sched.h to include/nuttx/sched.h. This was done because binfmt/binfmt/excecmodule.c requires the prototype for sched_releasetcb() and was illegally including sched/sched/sched.h. That is a blatant violation of the OS modular design and the person that did this should be hung up by their thumbs. Oh... I did that back in a bad moment in 2014. Now that is made right.
* stm32h7_qspi: Board.h now may define the BOARD_QSPI_CLK macro to select one of
RCC_D1CCIPR_QSPISEL_{HCLK,PLL1,PLL2,PER} clocks to use with QUADSPI peripherial.
Defaults to HCLK for backward compatibility.
New macros in qspi.h: QSPICMD_IDUAL and QSPICMD_IQUAD for selecting the bit
width for instruction code (1,2 or 4 bits) of a qspi_cmdinfo_s, and
QSPIMEM_IDUAL and QSPIMEM_IQUAD for selecting the bit width of a qspi_meminfo_s.
* NX style fixes
Necessary for dlfcn etc on ESP32, which has separate memory regions
for instruction and data.
known issues/todo
* consider something similar to dual heaps for PROTOECTED
* consider to adapt binfmt as well
Commit 3b53cd1e57, " Fix improper use of inline" missed conversion of several inline functions. Also, some functions that require arguments were not handled correctly,
This was noted because there were still hundreds of implementations of the cache stubs in the ez80 build. This commit adds the missing conversions and fixes the bad function arguments.
I finally figured out why the ez80 code has gotten so big. It is because people have been put putting big inline functions in header files. That is a violation of the coding standard, since only c89 compatibility is required in all common code. But we have been tolerating inline function it because include/nuttx/compiler.h defines 'inline' to be nothing for C89 compilers.
As a result, static inline functions declared within a C file not so bad; the inline qualifier is ignored, if not supported, but otherwise all is well.
But it is catastrophic in header files. Those static inline functions are included as static functions and implemented in EVERY file that includes those header files, even if the functions are never called. That makes the code base huge!So there is another PR coming to fix some of the worst offenders.
This commit fixes two of the worst offenders I have encountered so far: include/nuttx/sempahore.h and cache.h. But there may be a few other changes needed. Under include/nuttx there are still inline functions thread.h, inclue/nuttx/list.h, mutex.h, tree.h, and include/nuttx/crypto/blake2s.h with no protection for compilers that do not handler the inline qualifier. Otherwise we are clean.
With the changes to these two header files, the size of the z20x build is reduced by about 40%. And incredible size savings.
* Adding support for BQ769x0 Battery Monitor IC (Work In Progress)
* Additional changes to support BQ769x0
* Store cell count and chip type when setting up
* Added shutdown, limits, charge/discharge switch, and clear faults operations
* Added support for current measurement; some cleanup
* Updated temperature reporting. Fixed negative current reporting.
* When setting safety limits, update limit structure with actual values used.
* Added note on battery limit structure
* Updates to BQ769x0. Re-ordered fault reporting, added fault cache, added ordered fault clearing
And remove syslog_init_e because all initialization is later now and we don't
distinguish the initialition phase anymore after ramlog don't need special
initialize.
Because we can get the same function by CONSOLE_SYSLOG/syslog_console_init.
BTW, it isn't a good choice to use g_ramlogfops as /dev/console since nsh
will read back what it send out which will surprise most people.
To ensure size_t same as toolchain definition in the first place and rename CXX_NEWLONG to ARCH_SIZET_LONG. The change also check whether __SIZE_TYPE__ exist before CONFIG_ARCH_SIZET_LONG so our definition can align with toolchain(gcc/clang) definition automatically.
Historically, the loopback driver used the largest packet size of all enabled link layer protocols. This permitted packets to be forward via the loopbak device with no major loss of performance. However, in experimenting with configurations where no other link layer protocols were enabled, this means the loopback packet size was set to the smallest possible size, to the SLIP minimum of 296 bytes. This resulted in terrible loopback performance.
This commit adds an option to increase the loopback packet size with the option CONFIG_NET_LOOPBACK_PACKETSIZE.
The loopback driver packet buffer should be quite large. The larger the loopback packet buffer, the better will be TCP performance of the loopback transfers. The Linux loopback device historically used packet buffers of size 16Kb, but that was increased in recent Linux versions to 64Kb. Those sizes may be excessive for resource constrained MCUs, however.
The network still enforces the lower limit that is the maximum packet size of all enabled link layer protocols. But this new option permits the loopback packet size to be increased from that.
* net/Kconfig: Adds CONFIG_NET_LOOPBACK_PKTSIZE option
* include/nuttx/net/netconfig.h: Assures that the packet size that is used is at least as large as the largest packet size of other link layer protocols.
* drivers/net/loopback.c: Use that larger packet size.
* boards/sim/sim/sim/configs/tcploop/defconfig: Set the loopback packet size to 1500
Call xxx_timer_initialize from clock subsystem to make timer ready for use as soon as possiblei and revert the workaround:
commit 0863e771a9
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Apr 26 07:24:57 2019 -0600
Revert "sched/clock/clock_initialize.c: clock_inittime() needs to be done with CONFIG_SCHED_TICKLESS and clock_initialize should skip clock_inittime() for external RTC case since the RTC isn't ready yet."
This reverts commit 2bc709d4b9.
Commit 2bc709d4b9 was intended to handle the case where up_timer_gettime may not start from zero case. However, this change has the side-effect of breaking every implementation of tickless mode: After this change the tickless timer structures are used before they are initialized in clock_inittime(). Initialization happens later when up_initialize is called() when arm_timer_initialize().
Since the tickless mode timer is very special, one solution might be to
1. Rename xxx_timer_initialize to up_timer_initialize
2 Move up_timer_initialize to include/nuttx/arch.h
3. Call it from clock subsystem instead up_initialize
Basically, this change make timer initialization almost same as rtc initialization(up_rtc_initialize).
For now, however, we just need to revert the change.
* include: Introduce elf64.h and elf.h
Added elf64.h for 64bit ELF support and moved common definitions
from elf32.h to elf.h. Also introduced Elf_xxx to be used in
common libraries such as binfmt.
* binfmt, include, modlib, module: Add support for ELF64
Elf_xxx must be used instead of Elf32_xxx to support ELF64.
To use ELF64, CONFIG_ELF_64BIT must be enabled.
* binfmt, modlib: Add support for relocate address
* arch: risc-v: Add include/elf.h
* libs: machine: Add risc-v related files.
NOTE: Currently only supports ELF64
* boards: maix-bit: Add elf and posix_spawn configurations
* boards: maix-bit: Add support for module configuration
If SMP is enabled this function will return the number of the CPU that the thread is running on. This is non-standard but follows GLIBC if __GNU_SOURCE is enabled. The returned CPU number is, however, worthless since it returns the CPU number of the CPU that was executing the task when the function was called. The application can never know the true CPU number of the CPU tht it is running on since that value is volatile and change change at any time.
1. Remove the unused and unimplemented ipv6_chksum declaration
2. Update NET_ARCH_CHKSUM description to align with the implementation
3. Declare all checksum function prototype regardless CONFIG_NET_ARCH_CHKSUM
4. Remove the CONFIG_NET_ARCH_CHKSUM guard for tcp_ipv[4|6]_chksum
Gregory Nutt <gnutt@nuttx.org>
Run all .c and .h files modified in this PR through nxstyle and correct all coding standard problems.
Xiang Xiao <xiaoxiang@xiaomi.com>
Remove TIME_EXTENDED option to more conform C standard
Note: the code/data size increment is small
Author: Alan Carvalho de Assis <acassis@gmail.com>
Run nxstyle against .c and .h files and fix it
Author: Juha Niskanen <juha.niskanen@haltian.com>
Fix typos and some incorrect comments
Author: Gregory Nutt <gnutt@nuttx.org>
Run all .c and .h files in last PR through tools/nxstyle and correct all coding standard complaints.
Author: Oleg <ev.mipt@gmail.com>
* Fix CAN driver to work with internal OS interfaces. Store internal file pointer in f_priv and use it then to distinct readers (See issue #111)
* Store reader pointer in f_priv instead of filep
* Don't need in filep in can_reader_s
1.Consolidate absolute to relative timeout conversion into one place(_net_timedwait)
2.Drive the wait timeout logic by net_timedwait instead of devif_timer
This patch help us remove devif_timer(period tick) to save the power in the future.
Change-Id: I534748a5d767ca6da8a7843c3c2f993ed9ea77d4
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Here is the email loop talk about why it is better to remove the option:
https://groups.google.com/forum/#!topic/nuttx/AaNkS7oU6R0
Change-Id: Ib66c037752149ad4b2787ef447f966c77aa12aad
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
* Simplify EINTR/ECANCEL error handling
1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx
* Unify the void cast usage
1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
Author: Gregory Nutt <gnutt@nuttx.org>
Run all .h and .c files modified in last PR through nxstyle.
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Net cleanup (#17)
* Fix the semaphore usage issue found in tcp/udp
1. The count semaphore need disable priority inheritance
2. Loop again if net_lockedwait return -EINTR
3. Call nxsem_trywait to avoid the race condition
4. Call nxsem_post instead of sem_post
* Put the work notifier into free list to avoid the heap fragment in the long run. Since the allocation strategy is encapsulated internally, we can even refine the implementation later.
* Network stack shouldn't allocate memory in the poll implementation to avoid the heap fragment in the long run, other modification include:
1. Select MM_IOB automatically since ICMP[v6] socket can't work without the read ahead buffer
2. Remove the net lock since xxx_callback_free already do the same thing
3. TCP/UDP poll should work even the read ahead buffer isn't enabled at all
* Add NET_ prefix for UDP_NOTIFIER and TCP_NOTIFIER option to align with other UDP/TCP option convention
* Remove the unused _SF_[IDLE|ACCEPT|SEND|RECV|MASK] flags since there are code to set/clear these flags, but nobody check them.
Squashed commit of the following:
Author: Gregory Nutt <gnutt@nuttx.org>
Ran nxstyle against many of the affected files. But this job was too big for today. Many of the network drivers under arch are highly non-compiant and generate many, many faults from nxstyle. Those will have to be visited again another day.
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
This effects all network drivers as well as timing related portions of net/: devif_poll_tcp_timer shouldn't be skipped in the multiple card case. devif_timer will be called multiple time in one period if the multiple card exist, the elapsed time calculated for the first callback is right, but the flowing callback in the same period is wrong(very short) because the global variable g_polltimer is used in the calculation. So let's pass the delay time to devif_timer and remove g_polltimer.
Squashed commit of the following:
Author: Gregory Nutt <gnutt@nuttx.org>
net/: Trivial changes to PR from review. Biggest difference: type of s_error changed to int16_t to save a byte or two.
Author: liuhuahang <liuhuahang@xiaomi.com>
Implement SO_ERROR for getsockopt()
Misc changes made following recommendatinos of tools/nxstyle.
Author: kyChu <hello.kychu@gmail.com>
drivers/mtd/w25qxxxjv.c: Add QSPI-based Winbond NOR FLASH driver
drivers/mtd/Kconfig: include w25qxxxjv mtd driver to menuconfig
mtd/mtd.h: add function prototype of w25qxxxjv_initialize
We also make an attempt to avoid the thundering herd problem if there are multiple readers/pollers.
Patch also removes forcing CONFIG_RAMLOG_CRLF in nuttx/syslog/ramlog.h as there is no point of wasting precious RAM for useless characters.
This change decouples that upper activity-based logic from the lower random walk logic and allows use of other upper state detection logic (such as a custom, application-specific state machine).
net/netlink/netlink_route.c: Add Netlink socket NETLINK_ROUTE support for getting a snopshot of the Neighbor table.
net/neighbor/neighbor_snapshot.c: Add neighbor_snapshot() that will eventually be used by the Netlink sockets. Also fixed naming violation 'struct neighbor_entry' -> 'struct neighbor_entry_s'.
include/nuttx/net/neighbor.h: Expose format of the IPv6 neighbor table for use with Netlink sockets.
This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository.
Squashed commit of the following:
Author: Xiang Xiao <xiaoxiang@pinecone.net>
include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char.
Author: Gregory Nutt <gnutt@nuttx.org>
Fix several build issues/missing definitiona needed for OpenAMP build in drivers/.
Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for).
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
tools/: Fix the minor issue in Makefile
Author: Gregory Nutt <gnutt@nuttx.org>
drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle.
tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste.
fs/hostfs: Add configure and build support for hostfs RPC.
drivers/timer: Add configure and build support for syslog RTC.
drivers/syslog: Add configure and build support for syslog RPC.
drivers/serial: Add configure and build support for serial RPC.
Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support.
drivers/rptun: Add configure and build support for OpenAMP tunnel drivers.
drivers/net: Update Make.defs and Kconfig for OpenSDA support.
Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now.
Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application.
Author: zhuyanlin <zhuyanlin@pinecone.net>
This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
Author: Jianli Dong <dongjianli@pinecone.net>
This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
Author: Guiding Li <liguiding@pinecone.net>
This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
board/boarctl.c: Add support for the new BOARDIOC_ROMDISK command. This allows applications to create ROMFS block drivers without illegal direct calls to romdisk_register.
include/sys/boardctl.h: Add basic definitions to support a ROM disk creation boardctl() command.
Squashed commit of the following:
drivers/: Run tools/nxstyle against all drivers/*.c.
boards/boardctl.c: Add new boardctl() command, BOARDIOC_MKRD, that can be used to create a RAM disk. This will replace the illegal call to ramdisk_register() currently used by NSH.
drivers/mkrd.c: Add wrapper around ramdisk_register() for creating a proper ramdisk.
According to earlier standards, usage of select(), FD_CLR, FD_ISSET, FD_SET and FD_ZERO
just need include headers: sys/time.h, sys/types.h and unistd.h. So include sys/select.h
in time.h to compatible with it. Or mbedtls library would build break in calling select()
and FD_* related functions.
https://pubs.opengroup.org/onlinepubs/007908799/xsh/select.html
