This is a high resolution PWM driver, utilizing one 16-bit Flex-IO timer for
generating PWM period and the rest of the timers to generate PWM duty cycles.
This means that the period has to be the same for every PWM generated from one
FLEXIO block, but this way we can get 16-bit resolution for the PWM signals.
For a typical IMX9 HW there are 8 timers for each Flex-IO block, which means
that by using this driver one can get 7 PWM outputs from one block.
This driver can be later extended to have configuration options to use all
8 channels per flex-io by either using 8+8 -bit timer (less resolution) or by
using an external trigger from an LPIT.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
This commit implements the common RMT driver (already available for
the other Espressif's xtensa-based devices) for ESP32.
This allows us to have a proper separation between the lower and
upper-half drivers and use the 'ws2812' example to drive WS2812 RGB
LEDs.
1.
In file included from chip/stm32_rtc.c:31:
chip/stm32_rtc.c: In function 'rtchw_set_alrmar':
chip/stm32_rtc.c:761:11: warning: format '%x' expects argument of type 'unsigned int',
but argument 3 has type 'uint32_t' {aka 'volatile long unsigned int'} [-Wformat=]
761 | rtcinfo(" ALRMAR: %08x\n", getreg32(STM32_RTC_ALRMAR));
| ^~~~~~~~~~~~~~~~~~
chip/stm32_rtc.c:761:25: note: format string is defined here
761 | rtcinfo(" ALRMAR: %08x\n", getreg32(STM32_RTC_ALRMAR));
| ~~~^
| |
| unsigned int
| %08lx
2.
arm-none-eabi-ld: staging/libdrivers.a(userled_lower.o): in function `userled_setled':
drivers/leds/userled_lower.c💯 undefined reference to `board_userled'
Regression:
stm32h7/linum-stm32h753bi: add support to leds
Signed-off-by: chao an <anchao@lixiang.com>
This commit just rearranges the order of the types, data and
functions without modifying them. This is done to make it look more
similar with ESP32's ble adapter and ease maintanence.
Most of the functions used to set the peripherals are available for
all Espressif's chips. This commit uses this set of functions and
remove outdated functions that perform the same operations in a
chip level.
This commit updates the Wi-Fi and the BLE driver of ESP32. Most of
the changes rely on using the common sources and header files for
xtensa-based Espressif's SoCs.
The new Wi-Fi driver supports WPA3-SAE for both Station and SoftAP
mode. BLE's coexistence mode was enhanced according to the latest
libraries.
Please note that other sources required minor changes in order to
be compatible with the common sources.
Whenever a SPI flash operation will take place, it's necessary to
disable the cache and run no code from the flash. This includes
pausing the other CPU (when `CONFIG_SMP=y`). This commit prevents
an error to occur when the CPU core is evaluated before the task
is increased to the max priority.
Whenever a SPI flash operation will take place, it's necessary to
disable the cache and run no code from the flash. This includes
pausing the other CPU (when `CONFIG_SMP=y`). This commit prevents
an error to occur when the CPU core is evaluated before the task
is increased to the max priority.
adjust link options for userspace elf
specify system libs and apps lib to only link with nuttx target in flat build mode
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
Avoid using static mutex and recursive mutex as the resource to be
acquired/release. Instead, create a specific lock for each call if
it does not exist.
Avoid using static mutex and recursive mutex as the resource to be
acquired/release. Instead, create a specific lock for each call if
it does not exist.
Avoid using static mutex and recursive mutex as the resource to be
acquired/release. Instead, create a specific lock for each call if
it does not exist.
As __start must be placed at a precise location, a separate, explicit
input section is needed to guarantee this.
Why is this an issue ? NuttX uses --entry=__start which puts __start in
its correct location, but out-of-tree builds won't work, so it more robust
to use an explicit section for the startup code and enforce its placement
in the linker script.
This fixes build error (Werror):
Error: chip/stm32_foc.c:1918:12: error: 'stm32_foc_info_get' defined but not used [-Werror=unused-function]
1918 | static int stm32_foc_info_get(struct foc_dev_s *dev, struct foc_info_s *info)
| ^~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
If a context switch occurs in syscall, the g_running_task need to be recorded for assert logic.
This copies the logic from arm platforms
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
When entering the function from an external bootloader, the CPU could be using PSP. But the following
code expects MSP to be in use.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
We shouldn't panic the kernel when a user task excepts, we can just kill the user task and
it's children. Do this by returning to _exit() in kernel context.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Adds support for NXP i.MX9-series System-on-Module chips.
- Support for i.MX93 is added
- CPU is Cortex A55 / ARMv8.2A
- The chip also contains a Cortex M33, but no support is provided
- Supported drivers include lpuart only for now
We can decide whether use trustzone
After this patch, we can support the following mode:
ARCH_HAVE_TRUSTZONE ARCH_TRUSTZONE_DISABLED ARCH_TRUSTZONE_SECURE ARCH_TRUSTZONE_NONSECURE
Without Security Extensions n n n n
CHIP have NO trustzone
With Security Extensions y y n n
Only one bin in sec mode
With Security Extensions y n y n
TEE bin in sec mode
With Security Extensions y n n y
REE bin in non-sec mode
Signed-off-by: ligd <liguiding1@xiaomi.com>
Purpose: make the the os crash when busyloop with interrupt disable
Follow the arm gicv2 spec, if we want to use the IRQ and FIQ
simultaneously when not using the processor Security Externsions.
We should:
1. IRQ to Group 1 and FIQ to Group 0;
2. Set CICC_CTLR.FIQEn to 1;
Then in NuttX:
1. implement the arm_decodefiq and directly crash in it;
2. provide interface to change the IRQ to FIQ, e.g. change the
watchdog IRQ to FIQ, so the watchdog can trigger even with the
interrupt disabled (up_irq_save() called);
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
Currently only FLAT mode development can enjoy cmake build system. This
patch tries to add initial kernel mode support. It can build NuttX kernel
and libproxies.a, the latter will be further checked though.
This can already help to build an AMP remote node image as it can share
userland apps living in the AMP master node.
Major changes:
- in top folder:
- CMakeLists.txt adjust for KERNEL mode, separate from PROTECTED mode.
- in `syscall`:
- CMakeLists.txt add mksyscall target for stubs/proxies generation
- in `syscall/stubs`:
- CMakeLists.txt use dependency to mksyscall
- in `syscall/proxies`:
- CMakeLists.txt use dependency to mksyscall
- in `arch`:
- CMakeLists.txt separate KERNEL from PROTECTED mode.
- in `arch/risc-v/src`:
- CMakeLists.txt separate from PROTECTED mode, add sub folders.
- in `arch/risc-v/common`:
- CMakeLists.txt add sources and sub-folders for KERNEL mode.
- in `arch/risc-v/k230`:
- CMakeLists.txt add sources for KERNEL mode.
- in `boards/risc-v/k230/canmv230/src`:
- CMakeLists.txt adjust k230 specific scripts for kernel mode.
New additions:
- in `arch/risc-v/src/nuttsbi/` add CMakeLists.txt
- in `arch/risc-v/src/common/supervisor/` add CMakeLists.txt
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This patch fixes the issue that k230_hart_is_big() doesn't work in
S-mode. It also adds convenient debug macros to ease debugging process
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Some stm32 has alternate USART6 pinout on G9/G14 but others have it
on A12/A11. Unfortunately it's very difficult to make proper ifdefs for
this since position is based on package (and pincount) and not chip
itself. Creating such list would take a lot of time. Because of that
I just added another possible config for this pin and moved responsibility
of proper selection onto board code.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Onewire driver wants to use "struct up_dev_s *priv", which is extracted
from "struct uart_dev_s" and "struct inode". But inode and uart dev are
only declared when TERMIOS or BSDCOMPAT is also enabled. Without these
driver fails to compile with missing declaration errors. Adding some
additional "#if defined()" to these declarations fix the issue and driver
compiles and works properly (tested with ds18b20 temp sensor).
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
This driver is used with QEMU, to make it possible
to use networking.
This is not the MAC in ESP32, however, it can be used with QEMU.
The code was shamelessly copied from 31dac92e5f
This patch simplifies PMP handling for K230 using common APIs.
It also uses `g_misa` variable to expose the MISA issue.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
check if interrupt is busy when IRQCHAIN is disabled
this allows user to catch configuration errors and fail early when the
already busy vector is reused
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
at default x86_64 supports SSE, SSE2, this commit adds support for
SSE3, SSSE3, SSE41, SSE42 and SSE4A
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
this partly revert 4123615621 which works OK for PCI serial and network cards
but breaks QEMU EDU due to usage of sem and usleep in IDLE thread context.
Another solution will be provided later.
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
Current NuttX SBI assumes empty PMP settings but that is not always
true, for example some bootloaders may have PMP entries locked before
handling over to NuttX. This patch revises it by not using hardcoded
PMP region number.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Reproduce:
configure:
./tools/configure.sh qemu-armv7a:nsh -j8
open kasan:
CONFIG_MM_KASAN=y
run:
qemu-system-arm -cpu cortex-a7 -nographic -machine virt,virtualization=off,gic-version=2 -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel ./nuttx
error:
run hanged
Rootcause:
In Qemu armv7a, the ram-end reserved for MMU PGTABLE:
And the up_allocate_heap() directly use the ram-end for heap in arch/arm/src/common/arm_allocateheap.c
*heap_size = CONFIG_RAM_END - g_idle_topstack;
Then they are conflict.
Usually, we won't use the heap end, so can't find the error.
BUT, the KASAN will use the heap end for shadow, so found the error.
Resolve:
up_allocate_heap() consider of MMU, re-define the RAM_END at chip.h
Signed-off-by: ligd <liguiding1@xiaomi.com>
This commit adds support for TX DMA transfers for USART peripheral. Code
refactor in sam_serial.h was also required in order to have correct
defines for all possible cases (both RX and TX DMA used, just one used,
none used).
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
When an application is being loaded `up_addrenv_create ` calls
`create_region` to create the address environment. Only the first
entry is mapped when the region is created. Virtual memory that is
not mapped will trigger an exception when accessed. Other memory
pages are allocated and mapped on-demand. This enables setting
larger heap and stack for the process without compromising the
overall system memory.
Current `CONFIG_PAGING` refers to an experimental implementation
to enable embedded MCUs with some limited RAM space to execute
large programs from some non-random access media.
On-demand paging should be implemented for the kernel mode with
address environment implementation enabled.
Previously we need turn off the PMP locks in K230 vendor u-boot to use
NuttX, this complicates the setup process. This patch supports running
NuttX with original vendor u-boot so that to reduce setup complexity.
It also enables empty NSH prompt string in AMP master config as the apps
side support is ready.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
cpu0 thread0: cpu1:
sched_yield()
nxsched_set_priority()
nxsched_running_setpriority()
nxsched_reprioritize_rtr()
nxsched_add_readytorun()
up_cpu_pause()
IRQ enter
arm64_pause_handler()
enter_critical_section() begin
up_cpu_paused() pick thread0
arm64_restorestate() set thread0 tcb->xcp.regs to CURRENT_REGS
up_switch_context()
thread0 -> thread1
arm64_syscall()
case SYS_switch_context
change thread0 tcb->xcp.regs
restore_critical_section()
enter_critical_section() done
leave_critical_section()
IRQ leave with restore CURRENT_REGS
ERROR !!!
Reason:
As descript above, cpu0 swith task: thread0 -> thread1, and the
syscall() execute slowly, this time cpu1 pick thread0 to run at
up_cpu_paused(). Then cpu0 syscall execute, cpu1 IRQ leave error.
Resolve:
Move arm64_restorestate() after enter_critical_section() done
This is a continued fix with:
https://github.com/apache/nuttx/pull/6833
Signed-off-by: ligd <liguiding1@xiaomi.com>
Use private naming to avoid conflicts with user applications
In file included from libuv/src/unix/internal.h:25,
from libuv/src/unix/udp.c:23:
libuv/src/uv-common.h:57: warning: "container_of" redefined
57 | #define container_of(ptr, type, member) \
|
In file included from nuttx/include/nuttx/list.h:47,
from nuttx/include/nuttx/tls.h:40,
from nuttx/include/nuttx/sched.h:48,
from nuttx/include/nuttx/arch.h:87,
from nuttx/include/nuttx/userspace.h:35,
from nuttx/include/nuttx/mm/mm.h:30,
from nuttx/include/nuttx/kmalloc.h:34,
from nuttx/include/nuttx/lib/lib.h:31,
from nuttx/include/stdio.h:35,
from apps/system/libuv/libuv/include/uv.h:59,
from libuv/src/unix/udp.c:22:
nuttx/include/nuttx/nuttx.h:48: note: this is the location of the previous definition
48 | #define container_of(ptr, type, member) \
|
Signed-off-by: chao an <anchao@lixiang.com>
change optimization to -Os for CONFIG_DEBUG_FULLOPT to be compatible with other architectures
and add an option to select CONFIG_DEBUG_CUSTOMOPT
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
enable FPU and implement up_fpucmp to pass ostest
With aggressive optimization enabled (-O2/-O3), ostest FPU test will fail.
This is because the compiler will generate additional vector
instructions between subsequent up_fpucmp() calls (loop vectorization
somewhere in usleep() call), which will consequently overwrite
the expected FPU context (XMM registers).
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
1. Fix issue of system blocking due to disable dcache.
2. Support Ext-SRAM-Cache mmu mapping in SMP mode.
Signed-off-by: chenwen@espressif.com <chenwen@espressif.com>
__revoke_low_memory() is called in intel64_lowsetup()
fixes b4b96a6435 (PR #11758) in which the multiboot2 header was accessed
after revoking the low memory which caused page fault.
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
BSS nulling can now be optimized by the compiler, so it is necessary
to enable SSE instructions early in __nxstart
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
The stack pointer must be aligned to 16 bytes, otherwise the system crash on the first unaligned data access with vector instruction.
The problem is only observable with optimization enabled, when vector instructions are generated.
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
this is a follow up to the change from 2335b69120 which missed
updating stack frame length for this memset
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
During removal of F1 related stuff, code that configures FLASH
latency was removed, which rendered some of the F3 line unbootable.
It was done by mistake, since previous removed block was
'#ifdef VALUE_LINE', and block with FLASH code was '#ifndef VALUE_LINE'
and so it should not have been removed.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Add support for tricore TC397
1. Porting based on AURIX TC397 KIT_A2G_TC397_5V_TFT evaluation board
https://www.infineon.com/cms/en/product/evaluation-boards/kit_a2g_tc397_5v_tft/
2. In order to avoid license and coding style issues, The chip-level code
still uses the implementation of AURIX Development Studio SDK.
The SDK package will be downloaded as a third-party package during compilation:
https://github.com/anchao/tc397_sdk
3. Single core only, SMP implementation will be provided in the future.
4. Implemented the basic System Timer, ASCLIN UART driver.
5. Only the Tasking tool chain is supported (ctc/ltc, license maybe required)
6. 'ostest' can be completed on the TC397 development board.
How to run?
1. Setup the tasking toolchain and license
$ export TSK_LICENSE_KEY_SW160800=d22f-7473-ff5d-1b70
$ export TSK_LICENSE_SERVER=192.168.36.12:9090
2. Build nuttx ELF
$ ./tools/configure.sh tc397/nsh
$ make -j
...
artc I800: creating archive libc_fpu.a
LD: nuttx
3. Switch to windows PC, setup AURIX-studio to Debugger Launcher
4. Replace runing ELF to nuttx, and re-download ELF
Signed-off-by: chao an <anchao@lixiang.com>
This patch adds inter-processor interrupt support using K230 mailbox
device to improve the RPMsg efficiency. The polling logic has been
dropped.
Major changes:
- in arch/risc-v/include/k230:
- irq.h add IRQ for IPI devices
- in arch/risc-v/src/k230:
- Kconfig add IPI related config, increase polling delay
- Make.defs add k230_ipi.c to CHIP_SRCS
- k230_hart.c fix typo, add notes of zero MISA reading w/ NUTTSBI
- k230_irq.c use K230_PLIC_IRQS as ext IRQ limit to support IPI
- k230_rptun.c use IPI instead of polling
- in boards/risc-v/k230/canmv230/configs
- master enable IPI support
- remote enable IPI, TMPFS, RPMSGFS etc
New additions:
- in arch/risc-v/src/k230:
- k230_ipi.h add K230 IPI related defintions
- k230_ipi.c add K230 IPI driver
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
-- Detecting CXX compile features
-- Detecting CXX compile features - done
arm-none-eabi-gcc: error: -Wstrict-prototypes: No such file or directory
arm-none-eabi-gcc: error: -Wstrict-prototypes: No such file or directory
-- Configuring done
-- Generating done
Signed-off-by: chao an <anchao@lixiang.com>
The board's microphone uses 24-bit i2s and this commit also fixes
the segmentation fault caused by the audio buffer overflow.
arch/xtensa/src/esp32/esp32_i2s.c: Fix bug regarding 24-bit audio and add AUDIOIOC_STOP to ioctl
drivers/audio/audio_i2s.c: Report number of channels on AUDIOIOC_GETCAPS
in boards/xtensa/esp32/esp32-sparrow-kit:
/configs/nsh/defconfig: Add I2S configs
/src/esp32-sparrow-kit.h: Add the signature of esp32_i2sdev_initialize()
/src/esp32_bringup.c: Add call to esp32_i2sdev_initialize()
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
This commit implements the RMT peripheral for all the supported
Espressif's RISC-V devices. It also implements the support for the
WS2812 addressable RGB LED using the RMT peripheral.
WS2812 data is encoded into RMT items according to the RMT clock
source. This commit makes it by using the actual clock source in
spite of a pre-defind value.
- remove read-write logic - this should be handled by radio protocol implementation
- remove EVENTS and TASKS bit definitions - we can just use a signle definition
- add more radio ops
- fix frequency configuration
- fix printf warnings
- fix radio reset
