Remove hardcoded -DCLOCK_MONOTONIC from CFLAGS in Make.defs of several configurations. That defintiion is now automatically adding this define when CONFIG_LIBCXX=y.
cxd56xx: various fixes
* arch: arm: cxd56xx: Support to set any i2c frequency
This commit supports to be able to set the i2c frequency other than just
100 or 400 Hz.
* arch: arm: cxd56xx: Enable SD clock during access to SD card
- Improve GNSS low sensitivity with SD card inserted
- Reduce power consumption by stopping SD clock
* arch: arm: cxd56xx: Do PANIC() when cpu rx fifo is overflow
If CPU Rx FIFO is overflow, it's fatal error for system. In such a case,
this commit changes to allow the user to notice by calling PANIC() for
debuggability enhancement.
* arch: arm: cxd56xx: Fix compile error in sdhci debug code
* arch: arm: cxd56xx: Remove assertion in cpu tx queue
When CPU Tx queue is overflow, it returns -EAGAIN instead of assertion
to be able to retry.
* arch: arm: cxd56xx: Add configurations for cpu fifo elements
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arch: arm: cxd56xx: Fix LPADC configuration
LPADC options defined in the same symbol name, so kconfig tool
couldn't process them correctly.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arch: arm: cxd56xx: Update loader and gnssfw ver.17660
* arch: arm: cxd56xx: Fix hang-up when error interrupt occurs
Fix a problem that error interrupts are not cleared.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arch: arm: cxd56xx: Fix sdhci semaphore
Fix inital value of semaphore in sdhci drive.r
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* boards: cxd56xx: Treat the initial value of LNA power as off
LNA is always turned power on when GNSS is started. So it is desirable
that the initial value of the LNA power is off by default.
* boards: cxd56xx: Remove initial setting of PIN_AP_CLK
PIN_AP_CLK is used as a port selector of SDIO expander on the extension
board, and is set output low in initalizing. Therefore, this pin cannot
be used for other board. To avoid this restriction, remove this initial
operation because this pin is pulled down by default on the extension
board.
Approved-by: Gregory Nutt <gnutt@nuttx.org>
It appears Yann Morin's kconfig-frontends project has gone offline and
the website at http://ymorin.is-a-geek.org/projects/kconfig-frontends
is not responding. Until we can identify a "proper" upstream project,
use the snapshot in NuttX tools repository.
Replace (almost) all links to Yann Morin's kconfig-frontends in the
docs to point to the NuttX tools snapshot instead, with the following
exceptions:
nuttx/Changelog for version 6.17, 2012-04-14: Leave this historical
information intact.
nuttx/README.txt: Document the source of our snapshot.
boards: spresense: Add board initialization for isx012
Add isx012 initialization to the board and include the needed headers
Approved-by: Gregory Nutt <gnutt@nuttx.org>
boards: spresense: add isx012 camera initialization and config
* boards: spresense: add isx012 camera initialization
Add the initialization for the isx012 camera sensor.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* boards: spresense: add camera defconfig
For easy configuration add camera defconfig for spresense board
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Squashed commit of the following:
Some scripts use TABs, others spaced. Make usage consistent.
Move __exidx_end assignment inside of brackets.
Remove old __exidx_end assignment.
Move __exidx_start assignment inside of brackets.
Remove old __exidx_start assignment
noards: arm: cxd56xx: migrate common code
* boards: arm: cxd56xx: common: move boot to common
This is a common function and can be reused by all boards.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* boards: arm: cxd56xx: common: move flash to common
This is a common function and can be reused by all boards.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* boards: arm: cxd56xx: common: move I2C driver to common
This is a common function and can be reused by all boards.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* boards: arm: cxd56xx: common: move uid to common
This is a common function and can be reused by all boards.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* boards: arm: cxd56xx: common: move usbmsc to common
This is a common function and can be reused by all boards.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arch: arm: cxd56: add SPH
The SPH is used by the ASMP implementation from the SDK.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Squashed commit of the following:
Correct some additional compile-related issues.
Move include/nuttx/binfmt/builtin.h to include/nuttx/lib/builtin.h. Move apps/builtin/lib_builtin_forindex.c to libs/libc/builtin/lib_builtin_forindex.c.
Move binfmt/libbuiltin to libs/libc/builtin. There are calls made directly from apps/nshlib into this logic and hence, must be part of a library that can be shared between the OS and applications.
boards: cxd56xx: add SCU sensors (2/2)
* boards: cxd56xx: add cxd56_bh1721fvc initialization
We are adding the sensor initialization for cxd56xx boards in the
common board folder.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* boards: cxd56xx: add cxd56_bh1745nuc initialization
We are adding the sensor initialization for cxd56xx boards in the
common board folder.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* boards: cxd56xx: add cxd56_bm1383glv initialization
We are adding the sensor initialization for cxd56xx boards in the
common board folder.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* boards: cxd56xx: add cxd56_bm1422gmv initialization
We are adding the sensor initialization for cxd56xx boards in the
common board folder.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* boards: cxd56xx: add cxd56_bmi160 initialization
We are adding the sensor initialization for cxd56xx boards in the
common board folder.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* boards: cxd56xx: add cxd56_bmp280 initialization
We are adding the sensor initialization for cxd56xx boards in the
common board folder.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* boards: cxd56xx: add cxd56_kx022 initialization
We are adding the sensor initialization for cxd56xx boards in the
common board folder.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* boards: cxd56xx: add cxd56_lt1pa01 initialization
We are adding the sensor initialization for cxd56xx boards in the
common board folder.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* boards: cxd56xx: add cxd56_rpr0521rs initialization
We are adding the sensor initialization for cxd56xx boards in the
common board folder.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* boards: cxd56xx: add cxd56_sensors initialization
We are adding the sensor initialization for cxd56xx boards in the
common board folder.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arch: arm: cxd56: add Backup Log driver
The driver will be used to backup logs on crash.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* boards: arm: cxd56xx: common: add crashlog driver
Add Crashlog driver with support for reset on crash
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* boards: arm: cxd56xx: move gs2200m initialization
Move the board gs2200m initalization to the common board folder
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* boards: arm: cxd56xx: move ili9340 initialization
Move the board ili9340 initalization to the common board folder
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* boards: arm: cxd56xx: move lpm013m091a initialization
Move the board lpm013m091a initalization to the common board folder
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* boards: arm: cxd56xx: common: typo fixes
HEADER: Updates on file location
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Add the sensor initialization for cxd56xx boards in the common board folder
* boards: cxd56xx: apds9930: typo fix
fix apds9930 typos
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* boards: cxd56xx: add cxd56_ak09912 initialization
We are adding the sensor initialization for cxd56xx boards in the
common board folder.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* boards: cxd56xx: move cxd56_bmi160 initialization
We are adding the sensor initialization for cxd56xx boards in the
common board folder.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* boards: cxd56xx: add cxd56_apds9930 initialization
We are adding the sensor initialization for cxd56xx boards in the
common board folder.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* boards: cxd56xx: add cxd56_apds9960 initialization
We are adding the sensor initialization for cxd56xx boards in the
common board folder.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
boards: cxd56xx: add SCU sensors
* drivers: platform: add Avago APDS9930 Proximity and Ambient light Sensor
This sensor is connected to the SCU on spresense board
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* drivers: spresense: add Rohm BH1721FVC Ambient Light Sensor
This sensor is connected to the SCU on spresense board
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* drivers: spresense: add Rohm BH1745NUC Color Sensor
This sensor is connected to the SCU on spresense board
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* drivers: spresense: add Rohm BM1383GLV/BM1383AGLV Pressure Sensor
This sensor is connected to the SCU on spresense board
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* drivers: spresense: add Rohm BM1422GMV/BM1422AGMV Magnetic Sensor
This sensor is connected to the SCU on spresense board
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* drivers: spresense: add Bosch BMI160 Sensor support
This sensor is connected to the SCU on spresense board
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* drivers: spresense: add Bosch BMP280 Barometic Pressure Sensor
This sensor is connected to the SCU on spresense board
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* drivers: spresense: add Kionix KX022/KX122 Acceleration Sensor
This sensor is connected to the SCU on spresense board
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* drivers: spresense: add Murata LT1PA01 Proximity and Ambient light Sensor
This sensor is connected to the SCU on spresense board
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* drivers: spresense: add Rohm RPR0521RS Proximity and Ambient light Sensor
This sensor is connected to the SCU on spresense board
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* drivers: sensors: bmi160: add optional I2C address
Add a menu option for the case when the SDO pin is pulled to VDDIO
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
tools: unix: add support for common board folder
* tools: unix: add support for common board folder
this patch adds support for a common board folder and simplifies the code
and maintenance on boards that share the same code
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* cxd56xx: migration to a common folder
This is the first platform to be migrated to the new common folder
structure.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
boards: add stub drivers folder for later use
* boards: add stub drivers folder for later use
The board/drivers folder is added for future use.
In this folder we should place drives that are platform specific and
depend on HW that is present only on a specific platform.
NOTE: All shared drivers should go to the regular driver folder
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* tools: shift BOARD_DIR one level up
In preparation for drivers and common folders we are moving the
BOARD_DIR path up one level.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* tools: add drivers/platform symlink
Link the boards/<arch>/<chip>/drivers dir to drivers/platform
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* drivers: add platform specifc drivers extension
There are platforms that use specific drivers and we should be able to
include those drivers in the build
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* board: cxd56xx: drivers: add AK09912 driver for SCU
This is a platform specific driver connected on the SCU unit.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Squashed commit of the following:
boards/arm/s32k1xx/s32k148evb: Correct linker scripts for the S32K148, Update README files, Hook eht S32K148EVB into the configuration and build system.
arm/s32k1xx/s32k148evb: Verify core and peripheral clocking. It is the same as the S32K146EVB. Fixed one-too-many copy-paste error in both.
boards/arm/s32k1xx/s32k148evb: Correct LED and button pin number for the S32K148EVB.
boards/arm/s32k1xx/s32k148evb: Change all occurrences of 146 to 148.
boards/arm/s32k1xx/s32k148evb: Initial S32K148EVB. Initial commit is just clone of S32K146EVB with file name changes
arch/arm/src/s32k1xx/s32k1xx_lowputc.c: Fix a typo that prevented LPUART1 from working.
arch/arm/src/s32k1xx/s32k1xx_periphclocks.c and related files: Fix yet another case of confusion between pre-decremented and non-decremented divider values. Enforce the rule that dividers are not decremented until the moment they are written into registers.
arch/arm/src/s32k1xx/s32k1xx_clockconfig.c: Fix another problem related to whether a divider is pre-decremented or not. The answer must be the divder values are never pre-decremented. They are decremented just before being written to hardware.
arch/arm/src/s32k1xx/s32k1xx_clockconfig.c: Clean up some bad conditional logic. Precedence of operators problem.
boards/arm/s32k1xx/s32k118evb: Add support for execution out of SRAM. This is helpful for bringup when you want to avoid putting a lethal image in FLASH.
arch/arm/src/s32k1xx/s32k1xx_clockconfig.h: Remove crystal frequency, it is not used.
arch/arm/src/s32k1xx/s32k1xx_wdog.h: Fix a typo in a register name.i
boards/arm/s32k1xx/s32k*evb/configs/nsh/defconfig: Create Motorola SREC output format.
arm: stm32: codestyle fixes
* arm: stm32f0l0g0: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: stm32f7: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: stm32h7: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: stm32l4: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: stm32: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Squashed commit of the following:
s32k1xx/s32k146evb/scripts/flash.ld: Update the linker script for the S32K146.
boards/: Hook the S32K146EVB into the configuration and build system.
s32k146_clockconfig.c: Add S32K146 clock configuration.
boards/arm/s32k1xx/s32k146evb/src/s32k146_periphclocks.c: Update peripheral clocking for the S32K146.
arm/s32k1xx/s32k146evb: Initial support fo S32K146EVB. Starting point is just the S32K118EVB with name changes.
boards/arm/s32k1xx/s32k118evb/include/board.h: Add LPUART0 pin disambiguation.
arch/arm/src/s32k1xx/hardware: Add pin mux definitions for S32K116, 118, 142, 144, 146, and 148.
arch/arm/src/s32k1xx/s32k1xx_pin.c and .h: Add support for PIDR register that disables a gneral purpose pin from acting as an input.
arch/arm/src/s32k1xx/s32k1xx_pin.c and .h: The device does not support slew rate controls or open drain (on all the pins). Only pins that are configured for a protocol that requires open-drain (e.g;, LPI2C, LPUART single-wire) will work in open-drain mode.
Finishes peripheral clock initialization:
arch/arm/src/s32k1xx/s32k11x/s32k11x_clockmapping.c
arch/arm/src/s32k1xx/s32k14x/s32k14x_clockmapping.c
Provide MCU-specific mapping of clock names to PCC control registers.
boards/arm/s32k1xx/s32k118evb/src/s32k118_periphclocks.c
Provides initial clocking for for the S32K118EVB
arch/arm/src/s32k1xx/s32k1xx_periphclocks.c: Add logic to initialize peripheral clocking.
arch/arm/src/s32k1xx/s32k1xx_clockconfig.c: Add SIM clock configuration.
stm32h7 RTC and friends support
* stm32h7:Removed f7 in file path
* stm32f7:Fix overwritten IRQ enabled
System boot order calls clock_initialize then up_initalize.
clock_initialize was setting up the alarm IRQ
up_initalize is initializing the NVIC.
This most likely worked in the past due to a bug in the
NVIC init code that failed to clear the Interrupt enables.
That was fixed in 510b0f7e arch/arm/src: Correct all ARMv7-M
architectures. Interrupts were not be disabled correctly
on power up.
* stm32h7:Ported over F7 RTC
* nucleo-h743zi:Add RTC
Approved-by: Gregory Nutt <gnutt@nuttx.org>
arm: sam & tiva: codestyle fixes
* arm: samd2l2: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: samd5e5: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: samv7: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: tiva: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
arm: sam34: codestyle fixes
* arm: sam34: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: sama5: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Squashed commit of the following:
boards/arm/s32k1xx/s32k118evb/configs/nsh: Add a basic NSH configuration.
boards/arm/s32k1xx/s32k118evb/scripts: Add linker scripts and Make.defs.
configs/: Hook the S32K118EVB board into the configuration system.
boards/arm/s32k1xx/s32k118evb: Add initial support for the NXP S32K118EVB.
arm: codestyle fixes 4
* arm: max326xx: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: moxart: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: nrf52: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: nuc1xx: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: xmc4: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: tms570: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: str71x: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
arm: codestyle fixes 3
* arm: lpc214x: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: lpc2378: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: lpc31xx: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: lpc54xx: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: lpc43xx: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
arm: codestyle fixes 2
* arm: kl: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: lc823450: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: lpc17xx_40xx: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
arm: codestyle fixes 1
* arm: a1x: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: am335x: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: c5471: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: cxd56xx: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: dm320: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: efm32: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: imx6: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: imxrt: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: kinetis: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Master
* Revert "Merged in yanqil-br/feature-multi_chan_pwm (pull request #973)"
This reverts commit aef0e0b538.
* arch/arm/src/{stm32/stm32f7/stm32h7/stm32l4}/stm32_pwm.c: configure multi-channel duty only if channel specified. This allows you to update duty cycle for a single channel
* nucleo-f303re/configs: add basic NSH configuration
* nucleo-f303re/configs/pwm: enable console on UART2 and set entry point to nsh_main
Approved-by: Gregory Nutt <gnutt@nuttx.org>
codestyle fixes
* misoc: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* or1k: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* renesas: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* risc-v: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sim: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* x86: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* xtensa: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z16: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z80: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
avr: hc: mips: codestyle fixes
* avr: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* hc: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mips: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
group boards based on chip
* a1x: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* am335x: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* c5471: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* scx56xx: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* dm320: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* efm32: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* imx6: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* imxrt: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* kinetis: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* kl: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lc823450: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc17xx_40xx: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc214x: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc2378: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc31xx: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc43xx: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc54xx: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* max326xx: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* moxart: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nrf52: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nuc1xx: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam34: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sama5: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* samd2l2: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* samd5e5: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* samv7: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f0l0g0: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f7: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32h7: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32l4: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* str71x: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* tiva: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* tms570: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* xmc4: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* p112: typo fix
this boars is a z80 board and was moved to the wrong arch
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* avr: at32uc3: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* avr: at90usb: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* avr: atmega: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* hc: mcs92s12ne64: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mips: pic32mx: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mips: pic32mz: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* misoc: lm32: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* or1k: mor1kx: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* renesas: m32262f8: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* renesas: sh7032: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* risk-v: gap8: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* risk-v: nr5m100: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sim: sim: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* x86: qemu: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* xtensa: esp32: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z16: z16f2811: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z80: ez80: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z80: z180: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z80: z80: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z80: z8: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* tools: update tools for boards based on chip
This patch updates only the linux tools
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* pcduino-a10: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* beaglebone-black: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* c5471evm: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* spresense: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ntosd-dm320: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* efm32-g8xx-stk: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* efm32gg-stk3700: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-efm32g880f128-stk: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sabre-6quad: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* imxrt1050-evk: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* imxrt1060-evk: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* freedom-k28f: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* freedom-k64f: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* freedom-k66f: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* kwikstik-k40: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* teensy-3.x: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* twr-k60n512: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* twr-k64f120m: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* freedom-kl25z: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* freedom-kl26z: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* teensy-lc: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lc823450: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lincoln60: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4088-devkit: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4088-quickstart: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpcxpresso-lpc1768: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mbed: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mcb1700: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-lpc1766stk: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* open1788: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* pnev5180b: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* u-blox-c027: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* zkit-arm-1769: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mcu123-lpc214x: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* zp214xpa: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-lpc2378: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ea3131: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ea3152: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-lpc-h3131: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* bambino-200e: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4330-xplorer: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4337-ws: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4337-evb: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4370-link2: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpcxpresso-lpc54628: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* max32660-evsys: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* moxa: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nrf52-generic: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nutiny-nuc120: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arduino-due: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* flipnclick-sam3x: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam3u-ek: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam4cmp-db: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam4e-ek: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam4l-xplained: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam4s-xplained: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam4s-xplained-pro: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sama5d2-xult: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sama5d3-xplained: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sama5d3x-ek: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sama5d4-ek: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* samd20-xplained: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* samd21-xplained: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* saml21-xplained: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* metro-m4: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* same70-xplained: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* same71-xult: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* axoloti: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* clicker2-stm32: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* cloudctrl: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* fire-stm32v2: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* hymini-stm32v: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* maple: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mikroe-stm32f4: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f103rb: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f207zg: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f302r8: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f303re: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f303ze: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f334r8: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f410rb: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f446re: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f4x1re: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-1152re: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-e407: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-h405: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-h407: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-p107: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-p207: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-p407: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* omnibusf4: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* photon: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* shenzou: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm3210e-eval: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm3220g-eval: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm3240g-eval: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32_tiny: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32butterfly2: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f103-minimum: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f334-disco: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f3discovery: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f411e-disco: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f429i-disco: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f4discovery: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32ldiscovery: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32vldiscovery: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* viewtool-stm32f107: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* b-l072z-lrwan1: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f072rb: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f091rc: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f071rg: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l073rz: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f051-discovery: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f072-discovery: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-144: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f746-ws: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f746g-disco: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f746g-disco: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-h743zi: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* b-l475e-iot01a: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l432kc: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l432re: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l476rg: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l496zg: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32l476-mdk: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32l476vg-disco: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32l4r9ai-disco: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-strp711: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* dk-tm4c129x: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* eagle100: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ekk-lm3s9b96: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* launchxl-cc1310: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* launchxl-cc1312r1: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lm3s6432-s2e: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lm3s6965-ek: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lm3s8962-ek: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lm4f120-launchpad: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lm4c123g-launchpad: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lm4c1294-launchpad: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* launchxl-tms57004: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* tms570ls31x-usb-kit: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* xmc4500-relax: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* zp214xpa: typo fix
add missing tools/oocd.sh
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
group boards by architecture
* z80: group boards by architecture
all boards that share the same architecture are moved to the same arch
folder following the soc layout
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z16: group boards by architecture
all boards that share the same architecture are moved to the same arch
folder following the soc layout
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* xtensa: group boards by architecture
all boards that share the same architecture are moved to the same arch
folder following the soc layout
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* x86: group boards by architecture
all boards that share the same architecture are moved to the same arch
folder following the soc layout
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sim: group boards by architecture
all boards that share the same architecture are moved to the same arch
folder following the soc layout
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* risc-v: group boards by architecture
all boards that share the same architecture are moved to the same arch
folder following the soc layout
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* renesas: group boards by architecture
all boards that share the same architecture are moved to the same arch
folder following the soc layout
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* or1k: group boards by architecture
all boards that share the same architecture are moved to the same arch
folder following the soc layout
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* misoc: group boards by architecture
all boards that share the same architecture are moved to the same arch
folder following the soc layout
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mips: group boards by architecture
all boards that share the same architecture are moved to the same arch
folder following the soc layout
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* hc: group boards by architecture
all boards that share the same architecture are moved to the same arch
folder following the soc layout
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* avr: group boards by architecture
all boards that share the same architecture are moved to the same arch
folder following the soc layout
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: group boards by architecture
all boards that share the same architecture are moved to the same arch
folder following the soc layout
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* boards: group boards by architecture
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
The legacy '/' delimiter is still supported but not recommend and not advertised.
Squashed commit of the following:
Update configurations instructions in more README.txt files to show ':' delimiter vs '/' delimiter.
Update configurations instructions in various README.txt file to show ':' delimiter vs '/' delimiter.
tools: Update all configuration-related tools to accept ':' separator between board and configuration name.
move board configs to configs folder
* amber: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arduino-due: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arduino-mega: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* avr32dev1: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* axoloti: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* b-l072z-lrwan1: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* b-l475e-iot01a: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* bambino-200e: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* beaglebone-black: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* c5471evm: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* clicker2-stm32: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* cloudctrl: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* demo9s12ne64: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* dk-tm4c129x: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ea3131: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ea3152: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* eagle100: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* efm32-g8xx-stk: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* efm32gg-stk3700: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ekk-lm3s9b96: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* esp32-core: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ez80f910200kitg: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ez80f910200zco: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* fire-stm32v2: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* flipnclick-pic32mz: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* flipnclick-sam3x: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* freedom-k28f: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* freedom-k64f: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* freedom-k66f: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* freedom-k125z: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* freedom-k126z: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* gapuino: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* hymini-stm32v: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* imxrt1050-evk: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* imxrt1060-evk: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* kwikstik-k40: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* launchxl-cc1310: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* launchxl-cc1312r1: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* launchxl-tms57004: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lc823450-xgevk: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lincoln60: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lm3s6432-s2e: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lm3s6965-ek: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lm3s8962-ek: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lm4f120-launchpad: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4088-devkit: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4088-quickstart: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4330-xplorer: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4337-ws: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4357-evb: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4370-link2: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpcxpresso-lpc1768: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpcxpresso-lpc54628: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* makerlisp: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* maple: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* max32660-evsys: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mbed: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mbc1700: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mcu123-lpc214x: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* metro-m4: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* micropendous3: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mikroe-stm32f4: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mirtoo: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* misoc: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* moteino-mega: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* moxa: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ne64badge: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nr5m100-nexys4: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nrf52-generic: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ntosd-dm320: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-144: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f072rb: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f091rc: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f103rb: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f207zg: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f302r8: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f303re: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f303ze: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f334r8: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f410rb: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f446re: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f4x1re: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-g071rb: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-h743zi: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l073rz: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l152re: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l432kc: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l452re: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l476rg: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l496zg: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nutiny-nuc120: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-efm32g880f128-stk: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-lpc-h3131: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-lpc1766stk: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-lpc2378: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-e407: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-h405: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-h407: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-p107: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-p207: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-p407: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-strp711: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimexino-stm32: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* omnibusf4: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* open1788: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* or1k: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* p112: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* pcduino-a10: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* photon: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* pic32mx-starterkit: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* pic32mx7mmb: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* pic32mz-starterkit: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* pnev5180b: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* qemu-i486: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sabre-6quad: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam3u-ek: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam4cmp-db: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam4e-ek: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam4l-xplained: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam4s-xplained: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam4s-xplained-pro: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sama5d2-xult: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sama5d3-xplained: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sama5d3x-ek: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sama5d4-ek: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* samd20-xplained: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* samd21-xplained: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* same70-xplained: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* saml21-xplained: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* samv71-xult: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* shenzhou: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sim: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* skp16c26: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* spresense: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm3210e-eval: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm3220g-eval: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm3240g-eval: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32_tiny: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32butterfly2: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f051-discovery: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f072-discovery: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f103-minimum: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f334-disco: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f3discovery: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f411e-disco: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f429i-disco: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f4discovery: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f746-ws: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f746g-disco: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f769i-disco: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32l476-mdk: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32l476vg-disco: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32l4r9ai-disco: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32ldiscovery: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32vldiscovery: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sure-pic32mx: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* teensy-2.0: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* teensy-3.x: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* teensy-lc: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* tm4c123g-launchpad: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* tm4c1294-launchpad: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* tms570ls31x-usb-kit: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* twr-k60n512: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* twr-k64f120m: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* u-blox-c027: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ubw32: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* viewtool-stm32f107: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* us7032evb1: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* xmc4500-relax: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z16f2800100zcog: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z80sim: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z8encore000zco: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z8f64200100kit: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* zkit-arm-1769: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* zp214xpa: move board configs to configs folder
This is a cleanup that will move all configs from the board folder to
a board/configs folder
NOTE:
The configure.sh script must be used with the new path <board-name>/configs/<config-name>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* tools: configure.sh: adjust the script to use boards/configs folder
Script update to pick the configs from the new configuration folder
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* tools: configure.bat: adjust the script to use boards/configs folder
Now we update the script to pick the configs from the new configuration folder
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Move boards to boards folder
* boards: rename configs folder to boards
This is the proposed layout after the change:
boards: - folder containing board folders
<board>: - name of each board
drivers: - extra drivers specific for platform
include: - header files for the boars
scripts: - extra scripts specific for platform
src: - board specific code
tools: - extra tools specific for platform
<config>: - board specific configuration(s)
Note:
<xxx> names are dependent on platform
This is a logical change to aim to the arch layout but this is a
huge change it should be done in several steps to lower the risk.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Kconfig: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Makefile: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Makefile.*: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* Make.defs: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .sh: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .mk: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .c & .h: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* .bat: replace configs with boards
The change is needed after the path change
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
