Example of /proc/PID/group/fd in this case:
FD OFLAGS TYPE POS PATH
17 67 9 0 socket:[domain 16, type 2, proto 0]
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Verification:
Write a packet, the length is bigger than CONFIG_DEV_FIFO_SIZE.
The return value should be -1, and the errno is EMSGSIZE.
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
Verifiction:
Write a bigger packet and read the packet using a smaller buffer.
The return length of reading should be the length of smaller buffer.
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
The error log is as follows:
tcp/tcp_send_buffered.c:376:57: runtime error: member access within misaligned
address 0x10075942 for type 'struct tcp_sack_s', which requires 4 byte alignment
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
The netdev of link-local address cannot be auto decided, and the link-local address should always be reguarded as address on local network.
The problem we met:
When using `icmpv6_autoconfig` with multiple netdev, the `icmpv6_neighbor` may take out wrong netdev with ip address already set, then it may send solicitation with wrong address (`dev->d_ipv6draddr`) on wrong device, and regard the link-local address as conflict (because `dev->d_ipv6draddr` exists on this network).
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
The memory allocated with strdup and asprintf is done via lib_malloc
so we need to use lib_free to deallocate memory otherwise the assertion
"Free memory from the wrong heap" is hit with flat mode and user separated
heap enabled mode.
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
net_lock/unlock is a big lock and repleace it to internal pool lock
to avoid the priority inversion problem.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
By:
1. Take out net_ip_binding_laddr/raddr macro
2. INET6_ADDRSTRLEN is long enough for all address buffer and no need to
add 0 to the end of buffer since inet_ntop will do so
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
In tcp protocol, if no ports are bound, Add random ports during the listening phase
libuvtestcase:
TEST_IMPL(tcp_listen_without_bind) {
int r;
uv_tcp_t server;
r = uv_tcp_init(uv_default_loop(), &server);
ASSERT(r == 0);
r = uv_listen((uv_stream_t*)&server, 128, NULL);
ASSERT(r == 0);
MAKE_VALGRIND_HAPPY();
return 0;
}
Signed-off-by: wangchen <wangchen41@xiaomi.com>
CC: libssh/src/auth.c
1ipfrag/ipv4_frag.c: In function 'ipv4_fragout':
ipfrag/ipv4_frag.c:224:7: error: 'ref' may be used uninitialized in this function [-Werror-maybe-uninitialized]
224 | lmemcpy(ipv4, ref, iphdrlen);
ipfrag/ipv4_frag.c:364:26: note: 'ref' was declared here
364 | FAR struct ipv4_hdr_s *ref;
CC: tls/task initinfo c
Signed-off-by: wangyingdong <wangyingdong@xiaomi.com>
We have IPV6_UNICAST_HOPS and IPV6_MULTICAST_HOPS in ipv6_setsockopt,
but only IP_MULTICAST_TTL in ipv4_setsockopt. So add IP_TTL support.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
When using IOB queue to store readahead data, we use one IOB for each
UDP packet. Then if the packets are very small, like 10Bytes per packet,
we'll use ~1600 IOBs just for 16KB recv buffer size, which is wasteful
and dangerous. So change conn->readahead to a single IOB chain like TCP.
Benefits:
- Using memory and IOBs more efficiently (small packets are common in
UDP)
Side effects:
- UDP recv buffer size may count the overhead
- A little bit drop in performance (<1%, more seek & copy)
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
if client is a noblocking socket, user can do close when server has not yet
invoke accept interface, so we need remove this socket from server.lc_waiters.
avoid server socket access the freed memory.
==936564==ERROR: AddressSanitizer: heap-use-after-free on address 0xf23071c8 at pc 0x58eaac3b bp 0xf0b9e218 sp 0xf0b9e208
READ of size 4 at 0xf23071c8 thread T0
#0 0x58eaac3a in dq_remfirst queue/dq_remfirst.c:45
#1 0x58fd1efe in local_accept local/local_accept.c:141
#2 0x58f66df6 in psock_accept socket/accept.c:149
#3 0x58f672a4 in accept4 socket/accept.c:280
#4 0x5be9ee0c in accept net/lib_accept.c:50
#5 0x592d6a5d in uv__accept libuv/src/unix/core.c:502
#6 0x5930d83b in uv__server_io libuv/src/unix/stream.c:550
#7 0x592efbde in uv__io_poll libuv/src/unix/posix-poll.c:335
#8 0x592d649a in uv_run libuv/src/unix/core.c:387
#9 0x5a7180f7 in service_schedule_loop service/common/service_loop.c:146
#10 0x591f300b in pthread_startup pthread/pthread_create.c:59
#11 0x5be8134f in pthread_start pthread/pthread_create.c:139
#12 0x58ee2762 in pre_start sim/sim_initialstate.c:53
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Add the proccessing logic of udp socketpair, and modify the
logic of sending and receiving for udp socketpair.
Verification:
- Use the socketpair interface to create a pair of local udp sockets,
and perform read and write operations.
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
In order to support the compilation of third-party library, we encounter
some situations where the macro is not defined, refer to the common
implementation of other systems and add relevant definitions.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
In file included from local/local_fifo.c:25:
In function ‘local_format_name’,
inlined from ‘local_hd_name’ at local/local_fifo.c:132:3,
inlined from ‘local_open_receiver’ at local/local_fifo.c:661:3:
local/local_fifo.c:77:16: warning: ‘%s’ directive output may be truncated writing up to 107 bytes into a region of size 100 [-Wformat-truncation=]
77 | CONFIG_NET_LOCAL_VFS_PATH "/%s%s", inpath, suffix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
local/local_fifo.c: In function ‘local_open_receiver’:
local/local_fifo.c:82:44: note: format string is defined here
82 | CONFIG_NET_LOCAL_VFS_PATH "/%s%s%" PRIx32,
| ^~
In function ‘local_format_name’,
inlined from ‘local_hd_name’ at local/local_fifo.c:132:3,
inlined from ‘local_open_receiver’ at local/local_fifo.c:661:3:
local/local_fifo.c:76:7: note: ‘snprintf’ output between 12 and 119 bytes into a destination of size 109
76 | snprintf(outpath, LOCAL_FULLPATH_LEN - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
77 | CONFIG_NET_LOCAL_VFS_PATH "/%s%s", inpath, suffix);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: chao an <anchao@xiaomi.com>
There're some apps trying to set too large SO_SNDBUF and SO_RCVBUF, which may use all IOBs in one socket and block all other network traffic.
Note:
Linux silently limits SO_SNDBUF to be less than `sysctl_wmem_max`, so we can also do this limit without returning any error.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
The udp connection structure contains the field, "domain", which defines which address family it belongs to. Prior to this change, this field was only populated correctly if IPv4 and IPv6 was enabled. As a result, packet information was not processed in udp_recvpktinfo, as expected when the appropriate socket option was enabled.
There is no control over whether a valid index is input when user use
ioctl to get netdev information, so removing this assertion will allow
ENODEV to be returned.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Updated alt1250 driver with regarding to the following changes.
- Add LTE hibernation feature
- Split source code per module
- Some refactoring
- Some bug fixes
ICMP's conn->dev is changing in icmp_sendmsg, when sending to different
address, or when error occurs (like NETDEV_DOWN). Then the poll callback
cannot be dropped from previous dev in free, because the dev is wrong.
So add dev to struct icmp_poll_s just like struct udp_poll_s.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
