Gregory Nutt
|
7a1d5866e5
|
SAMA5: Initial WDT timer (untested)
|
2013-10-19 12:26:47 -06:00 |
|
Gregory Nutt
|
49b3366eff
|
SAMA5: Hook RTC into build system; Finish RTC alarm logic; Verify correct behavior of the basic RTC functionality
|
2013-10-19 10:41:20 -06:00 |
|
Gregory Nutt
|
0a5d287e69
|
SAMA5: Add GPBR register definitions
|
2013-10-19 10:22:21 -06:00 |
|
Gregory Nutt
|
d1d9cf4de6
|
SAMA5 RTC: Beginning of an RTC driver for the SAMA5
|
2013-10-18 16:56:46 -06:00 |
|
Gregory Nutt
|
0eea9f2ebe
|
SAMA5: Add RTC and WDT register definition header files
|
2013-10-18 14:47:50 -06:00 |
|
Gregory Nutt
|
b661ba3e2a
|
STM32 DMA Priority: Select the correct default for F1 and other family members
|
2013-10-18 14:13:53 -06:00 |
|
Gregory Nutt
|
1b3127149c
|
SAMA5 LCD: Move framebuffers to center of free memory region. That creates a guard band around the framebuffers that gives a little protection from any bad writes into the framebuffer
|
2013-10-18 10:11:20 -06:00 |
|
Gregory Nutt
|
5c3f7f118c
|
Add SDIO preflight method
|
2013-10-18 08:15:09 -06:00 |
|
Gregory Nutt
|
fd468d219f
|
Changes to stm32_dmacapable interfaces from Mike Smith
|
2013-10-18 08:06:23 -06:00 |
|
Gregory Nutt
|
0c44715f07
|
STM32 DMA priority corrections from Mike Smith
|
2013-10-18 07:37:24 -06:00 |
|
Gregory Nutt
|
cda1fd00c7
|
Typo fixes for UART7 and UART8 DMA configs. From Mike Smith
|
2013-10-18 07:17:55 -06:00 |
|
Gregory Nutt
|
2d831bc717
|
SAMA5 TSD: Fix to prohibit reading samples when not valid
|
2013-10-17 17:26:06 -06:00 |
|
Gregory Nutt
|
8924101566
|
STM32 F103C: Correct some errors in pinmapping. From David Sidrane
|
2013-10-16 07:26:41 -06:00 |
|
Gregory Nutt
|
83982f3ef9
|
Misc changes to README files; Update SAMA5D3x-EK NxWM configuration to use Calibration instruction messages
|
2013-10-14 14:53:38 -06:00 |
|
Gregory Nutt
|
98ffd096a0
|
SAMA5 LCDC: Correct how framebuffer memory was being mapped; Remove options to get framebuffer memory in various. Because of the mapping and aligment requirements, those options really cannot be supported
|
2013-10-13 13:08:05 -06:00 |
|
Gregory Nutt
|
a3bb8d3d94
|
SAMA5 LCDC: Move framebuffer to lower memory; I suspect some corruption by interference
|
2013-10-13 10:42:14 -06:00 |
|
Gregory Nutt
|
34557b8c6b
|
SAMA5 LCDC: Fixed backlight PWM divider. Backlight no longer flashes
|
2013-10-11 17:12:35 -06:00 |
|
Gregory Nutt
|
1d0e7aaeff
|
SAMA5 LCDC: Wait when the LCDC is resynchronizing (SIF); Try start-up parameters from Barebox (this still don't work)
|
2013-10-10 18:44:08 -06:00 |
|
Gregory Nutt
|
57d04d3ff5
|
SAMA5 LCDC: Default resolution if now RGB565; Add option to select a different output resolution than the sofware resolution (needs to the 24BPP for this LCD).
|
2013-10-10 18:41:42 -06:00 |
|
Gregory Nutt
|
c79ae66fc2
|
SAMA5 LCDC: Move DMA descriptors out of internal SRAM and into SDRAM. I am not completely clear, but it looks like the LCDC cannot support DMA from internal SRAM
|
2013-10-10 12:02:41 -06:00 |
|
Gregory Nutt
|
1dfcee203c
|
SAMA5: Allow portions of external memory to be added to the heap instead of the whole thing
|
2013-10-10 12:00:32 -06:00 |
|
Gregory Nutt
|
e4e4912712
|
SAMA5 LCDC: Fix a few compilation errors that show up when additional layers are enabled
|
2013-10-09 18:46:05 -06:00 |
|
Gregory Nutt
|
b7f4a51ee2
|
SAMA5 LCDC: Few more bug fixes but still not working
|
2013-10-09 18:22:21 -06:00 |
|
Gregory Nutt
|
cc23806fa1
|
SAMA5 LCDC: Corrections from first debug sessions. Still a way to go
|
2013-10-09 13:21:27 -06:00 |
|
Gregory Nutt
|
f3a4fc42d7
|
SAMA5: LCDC driver incorporated into the build system.
|
2013-10-08 15:30:38 -06:00 |
|
Gregory Nutt
|
3ccbb7a07f
|
SAMA5: LCD driver is code complete but untested
|
2013-10-08 12:16:30 -06:00 |
|
Gregory Nutt
|
3fd7f4f855
|
SAMA5: More LCDC driver progress
|
2013-10-08 08:57:48 -06:00 |
|
Gregory Nutt
|
f6dc32c30c
|
SAMA5: More LCDC driver progress
|
2013-10-07 15:54:08 -06:00 |
|
Gregory Nutt
|
c7c6186356
|
SAMA5: LCDC driver progress
|
2013-10-07 12:05:16 -06:00 |
|
Gregory Nutt
|
cfd257cc0c
|
SAMA5 LCDC: Add 'skeleton' files that will eventually become an LCDC driver for the SAMA5
|
2013-10-06 09:08:52 -06:00 |
|
Gregory Nutt
|
74db990b7e
|
SAMA5: Completes LDCDC register definition file
|
2013-10-04 15:43:19 -06:00 |
|
Gregory Nutt
|
021bdecb05
|
SAMA5: Add LCD register definition header file
|
2013-10-04 10:11:12 -06:00 |
|
Gregory Nutt
|
5c9926b61e
|
SAMA5: Touchscreen driver now works
|
2013-10-04 08:03:38 -06:00 |
|
Gregory Nutt
|
ac66287ba7
|
SAMA5: First changes from touchscreen debug
|
2013-10-03 17:11:30 -06:00 |
|
Gregory Nutt
|
889ea78194
|
SAMA5: ADC and touchscreen drivers now build without errors
|
2013-10-03 14:32:21 -06:00 |
|
Gregory Nutt
|
0001191f6c
|
SAMA5: Integrate touchscreen and ADC drivers into the build
|
2013-10-03 12:49:13 -06:00 |
|
Gregory Nutt
|
db6d76baf5
|
SAMA5 ADC and touchscreen: Drivers are code complete and ready for test
|
2013-10-03 10:06:14 -06:00 |
|
Gregory Nutt
|
8b8523f935
|
SAMA Touchscreen/ADC: More progress
|
2013-10-02 16:55:22 -06:00 |
|
Gregory Nutt
|
b885459624
|
Add framework for Spark Core board support. The initial commit is a clone of the Maple Mini and still needs Spark customizations
|
2013-10-02 08:24:46 -06:00 |
|
Gregory Nutt
|
afa475e948
|
SAMA5 ADC/Touchscreen: A little more logic
|
2013-10-01 14:40:34 -06:00 |
|
Gregory Nutt
|
183421fe07
|
KL: Now builds up_puts
|
2013-10-01 11:51:27 -06:00 |
|
Gregory Nutt
|
e4074e1e21
|
KL: Missing header file in low level getc logic
|
2013-10-01 11:25:01 -06:00 |
|
Gregory Nutt
|
bb6b31f495
|
SAMA5 touchscreen and ADC: A little more progress
|
2013-10-01 11:23:24 -06:00 |
|
Gregory Nutt
|
7120517af0
|
SAMA5 ADC/Touchscreen: A little more progress. Still not complete
|
2013-09-30 14:28:42 -06:00 |
|
Gregory Nutt
|
d4e689ef1a
|
Add freedom-kl25z/minnsh configuration: This is an experiment to see just how small we and get an NSH configuration. From Alan Carvalho de Assis.
|
2013-09-30 09:20:11 -06:00 |
|
Gregory Nutt
|
dc3ac21264
|
KL25Z: Add low-level up_lowgetc function that can be used to provide an NSH console when the file system (and hence the serial driver) is disabled. From Alan Carvalho de Assis
|
2013-09-30 09:15:31 -06:00 |
|
Gregory Nutt
|
babcd56908
|
KL25Z: Add low-level up_lowgetc function that can be used to provide an NSH console when the file system (and hence the serial driver) is disabled. From Alan Carvalho de Assis
|
2013-09-30 09:11:54 -06:00 |
|
Gregory Nutt
|
3027dd3c54
|
SAMA5: Framework for an touchscreen driver (incomplete)
|
2013-09-30 09:04:21 -06:00 |
|
Gregory Nutt
|
e1fc3f51b3
|
SAMA5 ADC: Framework for an ADC driver (incomplete)
|
2013-09-30 07:22:34 -06:00 |
|
Gregory Nutt
|
05eb7e3da4
|
SAMA5 ADC: Beginning ADC register definition file
|
2013-09-29 18:34:09 -06:00 |
|
Gregory Nutt
|
fbf5359a39
|
Work around a start-up error in the GMAC that I still do not understand
|
2013-09-29 16:46:22 -06:00 |
|
Gregory Nutt
|
0e5caa2ae3
|
SAMA5 GMAC: Various fixes from initial debug
|
2013-09-29 15:03:57 -06:00 |
|
Gregory Nutt
|
7c81618f2f
|
Dependency generation fix for directories that keep object files in a sub-directory
|
2013-09-29 11:46:10 -06:00 |
|
Gregory Nutt
|
4aaee6fb3c
|
Clean up some naming: fd vs. fildes vs. filedes and filep vs filp
|
2013-09-28 16:50:07 -06:00 |
|
Gregory Nutt
|
22d0ebeb07
|
configs/compal_e88 converted to use the kconfig-frontends tools
|
2013-09-27 16:12:44 -06:00 |
|
Gregory Nutt
|
9fcbd8879a
|
SAMA5 GMAC and GMII support is code complete and ready for test
|
2013-09-27 13:12:04 -06:00 |
|
Gregory Nutt
|
f519f94926
|
Networking: Fix backward conditional in test to see if address is in ARP table. From Max Holtzberg
|
2013-09-27 08:27:35 -06:00 |
|
Gregory Nutt
|
fbd09bd75f
|
Beginng of support for GMII/RGMII PHYs
|
2013-09-26 15:55:21 -06:00 |
|
Gregory Nutt
|
48f1227fbf
|
SAMA5 GMAC: Initial driver check-in is just the EMAC driver forced to compile with the GMAC register definitions
|
2013-09-26 10:35:52 -06:00 |
|
Gregory Nutt
|
9dd0680f0e
|
SAMA5: Completes GMAC register definition header file
|
2013-09-26 09:13:14 -06:00 |
|
Gregory Nutt
|
5f4682c874
|
SAMA5 EMAC: Need to pace RX and TX because and RX can result in a TX; Process TX interrupt events before TX interrupt events for the same reason
|
2013-09-25 14:22:35 -06:00 |
|
Gregory Nutt
|
d53a0189f7
|
SAMA5 EMAC: Add some need D-Cache Flush/Invalidate operations. Add support for CONFIG_NET_DUMPPACKET
|
2013-09-25 11:51:49 -06:00 |
|
Gregory Nutt
|
ea4c8bbf68
|
Move CONFIG_NET_DUMPPACKET from LPC17 and STM32 to commong network drivers. Automatically enabled CONFIG_NETDEVICES when any Ethernet driver is enabled
|
2013-09-25 11:50:31 -06:00 |
|
Gregory Nutt
|
52b0a16cd3
|
Move CONFIG_NET_DUMPPACKET from LPC17 and STM32 to commong network drivers. Automatically enabled CONFIG_NETDEVICES when any Ethernet driver is enabled
|
2013-09-25 11:50:05 -06:00 |
|
Gregory Nutt
|
694080ba47
|
Fix badly applied patch to ENCX24J600
|
2013-09-25 08:26:56 -06:00 |
|
Gregory Nutt
|
d979859754
|
SAMA5 UDPHS: Dont' reject read request submissions while stalled. That causes an infinite loop. When stalling, cancel all pending write requests, but cancel only a reqd request if it is in progress. It will be immediately requeued
|
2013-09-24 15:06:17 -06:00 |
|
Gregory Nutt
|
5783fec78b
|
Comment out assertion that apparently fires inappropriately
|
2013-09-24 15:01:25 -06:00 |
|
Gregory Nutt
|
245f5ad32d
|
Slightly improved debug output
|
2013-09-24 13:47:03 -06:00 |
|
Gregory Nutt
|
f0ca9c2a8d
|
Stack monitor fixes
|
2013-09-24 12:14:52 -06:00 |
|
Gregory Nutt
|
a8461747b9
|
Standardize stack checking interface
|
2013-09-24 11:45:13 -06:00 |
|
Gregory Nutt
|
7c767c4ebe
|
SAMA5 UDPHS: Minor clean-up of STALL logic
|
2013-09-23 18:10:41 -06:00 |
|
Gregory Nutt
|
a070e748fd
|
SAMA5 HSMCI: Disable TX DMA. it is not reliable
|
2013-09-23 13:54:32 -06:00 |
|
Gregory Nutt
|
d167a09c74
|
SAMA5 HSMCI DMA clean-up. There are still some issues
|
2013-09-23 11:25:39 -06:00 |
|
Gregory Nutt
|
306a8743e0
|
Cosmetic changes to comments and coding style fixes
|
2013-09-22 14:48:22 -06:00 |
|
Gregory Nutt
|
b2e3a95565
|
Un-neccesary, cosmetic changes to label names and comments
|
2013-09-22 08:54:06 -06:00 |
|
Gregory Nutt
|
a768f32532
|
SAMA5 OHCI: Back out a change, the real root cause was a bug in the cache logic so the hack is no longer necessary
|
2013-09-22 07:53:51 -06:00 |
|
Gregory Nutt
|
d1ac44242f
|
ARMv7-A: Fix some error in alignment to cache line boundaries in the cache operations
|
2013-09-21 15:47:00 -06:00 |
|
Gregory Nutt
|
da37aa6413
|
SAMA5 OHCI: Fix some strange Dcache problems that I still don't understand; end address on cache operations is end+1, not end
|
2013-09-21 12:21:10 -06:00 |
|
Gregory Nutt
|
c9050ae5fd
|
ARMv7-A: Clarify end address paramet in cache operations: It is the end+1 address, not the end address
|
2013-09-21 12:16:34 -06:00 |
|
Gregory Nutt
|
f3d56e8695
|
SAMA5 OHCI: Fix some problems with D-Cache coherency and physical addressing related to interrupt endpoints
|
2013-09-20 15:22:09 -06:00 |
|
Gregory Nutt
|
f72ad05d0f
|
SAMA5 OHCI: When UPLL drives OHCI the logically correct divider of 10 does not work; But a divider of 5 does. Why?
|
2013-09-19 16:10:46 -06:00 |
|
Gregory Nutt
|
07cca4b318
|
SAMA5 EHCI: Fix bits being clobbered in PORTSC on hand-off to OHCI. OHCI: Fix some more trace configuration issues. Both: Don't muck with SFR port selection bits once they have been initialized
|
2013-09-19 10:52:33 -06:00 |
|
Gregory Nutt
|
f7436ee22f
|
More USB host trace conditional compilation problems
|
2013-09-19 09:08:55 -06:00 |
|
Gregory Nutt
|
48ed2b88d3
|
Fix inconsistency in USB host tracing definitions
|
2013-09-19 08:46:33 -06:00 |
|
Gregory Nutt
|
ef9032b4d6
|
SAMA5: Add support for the FPU OS test
|
2013-09-18 10:35:03 -06:00 |
|
Gregory Nutt
|
71354eb2c3
|
LPC17xx SPI: Remove an unused static prototype that caused a compile time warning
|
2013-09-17 17:14:08 -06:00 |
|
Gregory Nutt
|
425c26d27a
|
SAMA5 EMAC: Changes from early debug sessions. Still a way to go
|
2013-09-17 15:52:19 -06:00 |
|
Gregory Nutt
|
2c63995099
|
SAMA5 EMAC: Resolve issues with DUAL PHY support needed for both EMAC and GMAC peripherals. EMAC driver is now code complete and builds without complaint
|
2013-09-17 10:55:13 -06:00 |
|
Gregory Nutt
|
82cd614b66
|
Add prefex ETH0 to all PHY configurations to support multiple NICs
|
2013-09-17 10:45:07 -06:00 |
|
Gregory Nutt
|
a634dc0f33
|
SAMA4 EMAC: Remove some editor garbage that ended up in the last commit
|
2013-09-16 18:04:38 -06:00 |
|
Gregory Nutt
|
ec499a3aa8
|
SAMA5 EMAC: Add basic PHY logic
|
2013-09-16 18:00:21 -06:00 |
|
Gregory Nutt
|
2a10afb311
|
SAMA5 EMAC: Packet transmission logic
|
2013-09-16 14:58:11 -06:00 |
|
Gregory Nutt
|
97a0e3b74b
|
SAMA4 EMAC: Add basic interrupt handling logic
|
2013-09-16 13:57:57 -06:00 |
|
Gregory Nutt
|
f267cea5b6
|
SAMA5 EMAC: Incremental progress. Still not code complete
|
2013-09-16 11:36:12 -06:00 |
|
Gregory Nutt
|
47d4b41bad
|
Freescale Kinetis KL25Z PIT and TPM module register definitions
|
2013-09-15 17:00:50 -06:00 |
|
Gregory Nutt
|
ec03861315
|
SAMA4 EMAC buffer allocation logic
|
2013-09-15 14:26:25 -06:00 |
|
Gregory Nutt
|
45e4425687
|
SAMA5 Ethernet: Add support for PHY interrupts
|
2013-09-15 12:24:42 -06:00 |
|
Gregory Nutt
|
7c13790901
|
SAMA5: Update Ethernet initalization logic to handle both EMAC and GMAC
|
2013-09-14 08:19:36 -06:00 |
|
Gregory Nutt
|
7b6a1a57eb
|
SAMA5 EMAC: Create a empty, skeleton file that will eventually become the SAMA5 EMAC driver
|
2013-09-13 15:04:46 -06:00 |
|
Gregory Nutt
|
64825db9c2
|
STM32: Support for the LeafLabs Maple and Maple Mini boards. From Librae
|
2013-09-13 12:45:33 -06:00 |
|