Gregory Nutt
|
b47e1933f5
|
SAMA5: Add high-speed USB register definition header file
|
2013-08-28 17:50:05 -06:00 |
|
Gregory Nutt
|
4508986dbb
|
SAMA5 EHCI: Implemented (but did not test) interrupt endpoint logic
|
2013-08-28 13:07:35 -06:00 |
|
Gregory Nutt
|
6acb286c39
|
SAMA5 EHCI: Correct and extend pool allocation logic; Fix data toggle values
|
2013-08-28 10:03:48 -06:00 |
|
Gregory Nutt
|
556446e3a1
|
SAMA5: Fixes a bug in the way that the heap regions were being allocated
|
2013-08-27 16:43:19 -06:00 |
|
Gregory Nutt
|
e1fe1c3037
|
SAMA5 OHCI+EHCI: Using cp15_clean instead of cp15_coherent; EHCI: Need to set alt pointer in order to handle short transfers.
|
2013-08-27 13:07:21 -06:00 |
|
Gregory Nutt
|
56f9092a87
|
Fix all occurrences of "the the" in documentation and comments
|
2013-08-27 09:40:19 -06:00 |
|
Gregory Nutt
|
a55dda98b3
|
Add hooks to select Cortex-A8
|
2013-08-27 08:46:37 -06:00 |
|
Gregory Nutt
|
f69688422f
|
SAMA4 EHCI: Correct some backward conditional compilation; fix some warnings
|
2013-08-26 17:03:52 -06:00 |
|
Gregory Nutt
|
56f2b3b963
|
Add a new method to the USB host driver interface: getdevinfo. This method will return information about the currently connected device. At present, it only returns the device speed. The speed is needed by the enumeration logic in order to set a credible initial EP0 max packet size
|
2013-08-26 15:46:16 -06:00 |
|
Gregory Nutt
|
f500338401
|
SAMA5 EHCI: Status phase is the opposite direction as the data phase
|
2013-08-26 14:28:13 -06:00 |
|
Gregory Nutt
|
78812d5b80
|
SAMA5 EHCI: Taking direction from wrong bit in SETUP request; need to flush data buffer before starting SETUP request
|
2013-08-26 11:05:23 -06:00 |
|
Gregory Nutt
|
57eb83da9d
|
#17 Fix if CONFIG_SDIO_BLOCKSETUP defined, OS will crash. From CCTSAO
|
2013-08-26 08:54:46 -06:00 |
|
Gregory Nutt
|
250956c803
|
SAMA5 EHCI: Data toggle and status phase fixes
|
2013-08-25 14:45:08 -06:00 |
|
Gregory Nutt
|
d35e1c6bd4
|
EHCI reset bit was not being set correctly
|
2013-08-25 10:46:41 -06:00 |
|
Gregory Nutt
|
21566c02d6
|
SAMA5 OHCI: Fix semaphore handling bug. OHCI is now function by itself again after changes to integrate with EHCI
|
2013-08-25 08:57:35 -06:00 |
|
Gregory Nutt
|
254ebdaa4c
|
SAMA5 OHCI: Fix backward conditional compilation. Clean-up OHCI/EHCI debug output
|
2013-08-25 08:30:21 -06:00 |
|
Gregory Nutt
|
02fc7a5a08
|
SAMA5D3x-EK: Fix some backward conditional compilation
|
2013-08-24 14:06:47 -06:00 |
|
Gregory Nutt
|
26c03779f8
|
SAMA5: OHCI various bugfixes for interrupt handling
|
2013-08-24 13:03:15 -06:00 |
|
Gregory Nutt
|
28a103f1f2
|
SAMA5: EHCI now handles low- and full-speed connections by giving them to OHCI; OHCI now uses the work queue to defer interrupt processing; If both OHCI and EHCI are enabled, EHCI is the master of the UHPHS interrupt
|
2013-08-24 11:34:24 -06:00 |
|
Gregory Nutt
|
1f3cebdb40
|
SAMA5 EHCI: Added logic to detect port speed. Handling is insufficient
|
2013-08-24 07:36:05 -06:00 |
|
Gregory Nutt
|
3786e72947
|
Fix #endif with missing #if condition. Reported by Andrew Bradford
|
2013-08-23 16:40:30 -06:00 |
|
Gregory Nutt
|
d7cba5e5ca
|
SAMA5/ECHI: Debug register access, add logic to determine transfer size, fix setting of control bit in token
|
2013-08-23 16:23:15 -06:00 |
|
Gregory Nutt
|
e36a0e868d
|
SourceForge bug #16 Fix IO pin map. Add CONFIG_SERIAL_TERMIOS support. From CCTSAO
|
2013-08-23 11:48:53 -06:00 |
|
Gregory Nutt
|
1383701e7e
|
SAMA5 EHCI: cosmetic changes
|
2013-08-23 11:26:17 -06:00 |
|
Gregory Nutt
|
189174e26b
|
SAMA5: Add support for sharing ports when both OHCI and EHCI are enabled
|
2013-08-23 10:58:30 -06:00 |
|
Gregory Nutt
|
e59924a9e6
|
SAMA5 EHCI: Fix some list traversal bugs
|
2013-08-22 19:32:24 -06:00 |
|
Gregory Nutt
|
b7330bc849
|
SAMA5 EHCI: Initial debug changes
|
2013-08-22 17:25:00 -06:00 |
|
Gregory Nutt
|
e581bfeb29
|
SAMA5 EHCI: No complete for bulk and control endpoints
|
2013-08-22 13:36:16 -06:00 |
|
Gregory Nutt
|
ea2e4c11f8
|
SAMA5 EHCI: Add data transfer logic for asynchronous endpoints
|
2013-08-22 10:27:46 -06:00 |
|
Gregory Nutt
|
da3ff83fc3
|
SAMA5 EHCI: Add IOC error handling
|
2013-08-22 09:23:01 -06:00 |
|
Gregory Nutt
|
73efdf8d05
|
SAMA5 EHCI: transfer termination logic. Incomplete
|
2013-08-21 17:08:12 -06:00 |
|
Gregory Nutt
|
f831c8fe94
|
SAMA5 EHCI: Hardware initialization logic
|
2013-08-21 13:45:54 -06:00 |
|
Gregory Nutt
|
c109c39be7
|
Move all SAMA5 EHCI interrupt handling to the worker thread
|
2013-08-21 11:07:42 -06:00 |
|
Gregory Nutt
|
9f6ae9332f
|
SAMA5 EHCI: At list-oriented cache operations
|
2013-08-20 18:06:04 -06:00 |
|
Gregory Nutt
|
514826eeb1
|
Add SAMA5 EHCI list traversal logic
|
2013-08-20 17:01:30 -06:00 |
|
Gregory Nutt
|
6a79cea2c0
|
Beginning of support for SAMA5 EHCI. Not much there yet
|
2013-08-20 15:46:36 -06:00 |
|
Gregory Nutt
|
609dc65235
|
Add kernel/user memalign functions. Not fully integrated
|
2013-08-20 13:04:49 -06:00 |
|
Gregory Nutt
|
4d5789dfdd
|
SAMA5 OHCI+EHCI mostly cosmetic changes
|
2013-08-19 15:03:14 -06:00 |
|
Gregory Nutt
|
4bf3dbe149
|
USB host: Add device address management support in preparation for USB hub support
|
2013-08-18 14:31:57 -06:00 |
|
Gregory Nutt
|
a6e6b4ba2d
|
Add few more EHCI definitions
|
2013-08-18 13:01:13 -06:00 |
|
Gregory Nutt
|
07bd7c2168
|
STM32 F1 I2C: Fix a typo that crept in with some recent changes. From Yiran Liao
|
2013-08-18 07:45:14 -06:00 |
|
Gregory Nutt
|
b33de2b618
|
Add EHCI header file (not quite complete)
|
2013-08-17 14:19:18 -06:00 |
|
Gregory Nutt
|
a0837fca6c
|
SAMA5 OHCI: Driver is now basically functional
|
2013-08-16 13:13:21 -06:00 |
|
Gregory Nutt
|
db42d9350c
|
SAMA5 OHCI: Re-organize some endpoint list data structures.. Strange things happen when semaphores lie in DMA memory which is occasionally invalidated
|
2013-08-16 11:36:51 -06:00 |
|
Gregory Nutt
|
ddc93e1da3
|
STM32 SPI: nbits interface extended to handle LSB- or MSB-first operation. From Teemu Pirinen
|
2013-08-16 11:35:22 -06:00 |
|
Gregory Nutt
|
94bcdc66b0
|
SAMA5 OHCI: Don't prealloc RH port TDs and EDs. Allocate from a free list like other cases
|
2013-08-15 17:15:08 -06:00 |
|
Gregory Nutt
|
41c068f652
|
SAMA5 OHCI: Fix errors in cache handling; Don't add ED to control list until port is connected
|
2013-08-15 15:28:27 -06:00 |
|
Gregory Nutt
|
e23a92243c
|
SAMA5: ports should not be reset state (seems to make no difference)
|
2013-08-14 17:33:31 -06:00 |
|
Gregory Nutt
|
49f3831e11
|
SAMA5: Alternatie clock configuration that yields a perfect 48MHz full speed USB clock and a CPU clock of 384MHz
|
2013-08-14 15:16:04 -06:00 |
|
Gregory Nutt
|
e32b60a78c
|
SAMA5 OHCI: Use physical address and flush and/or invalidate data caches as necessary
|
2013-08-14 12:23:06 -06:00 |
|
Gregory Nutt
|
bdbe4a4f25
|
Clean up some LP17xx and STM32 USB host configuration compilation errors due to the massive changes to the USB host interfaces needed to support the SAMA5
|
2013-08-13 17:43:19 -06:00 |
|
Gregory Nutt
|
8f429fd54d
|
SAMA5: Major restructuring of the the OHCI driver drivers to better handle the multiple root hub ports and concureent transfers on each port.
|
2013-08-13 16:48:14 -06:00 |
|
Gregory Nutt
|
34418d12bb
|
Separate wait() and enumerate() methods from struct usbhost_driver_s and move to new interface, struct usbhost_connection_s. This is part of the necessary restructuring of the USB host interface to support multiple root hub ports.
|
2013-08-13 15:03:46 -06:00 |
|
Gregory Nutt
|
b4645f73ec
|
Back out most of the changes of 3b04d08043742b9e65cf38d45988b35bff91daed
|
2013-08-13 14:12:27 -06:00 |
|
Gregory Nutt
|
d0fbea35eb
|
Separate SAMA5 OHCI interrupt handling into separate functions
|
2013-08-13 13:34:35 -06:00 |
|
Gregory Nutt
|
7339c1c5e6
|
SAMA5 OHCI: Fix some erors in the loop that waits for device connection changes
|
2013-08-13 09:44:16 -06:00 |
|
Gregory Nutt
|
6d72cccdf0
|
Fix re-entry problem in SAMA5 up_putc
|
2013-08-13 09:42:40 -06:00 |
|
Gregory Nutt
|
f3bfd6a515
|
STM32 F3 fixes from John Wharington
|
2013-08-13 07:48:18 -06:00 |
|
Gregory Nutt
|
a4c195482f
|
More changes to USB host interface to support multiple downstream ports
|
2013-08-12 16:29:33 -06:00 |
|
Gregory Nutt
|
39696cbf96
|
First of several changes needed to support multiple USB host root hubs
|
2013-08-12 14:44:06 -06:00 |
|
Gregory Nutt
|
f5a0ce709c
|
SAMA5: Add logic to control VBUS power for OHCI
|
2013-08-12 11:59:10 -06:00 |
|
Gregory Nutt
|
dfe6452b8e
|
Add untested OHCI driver for the SAMA5; structure naming and header files for USB host initialization prototypes
|
2013-08-11 17:11:32 -06:00 |
|
Gregory Nutt
|
9cf1365cde
|
SAMA5: Some improvements to the HSCMI card removal/insertion logic
|
2013-08-11 11:13:11 -06:00 |
|
Gregory Nutt
|
69bc6afbd3
|
Add CAN configuration to STM32 config menu
|
2013-08-10 19:37:35 -06:00 |
|
Gregory Nutt
|
03130ca5a3
|
STM32: Fix STM32 serial init for non-reordered serial ports. From Lorenz Meier
|
2013-08-10 19:33:16 -06:00 |
|
Gregory Nutt
|
217ed87aad
|
Added option to disable STM32 serial port re-ordering
|
2013-08-10 19:29:44 -06:00 |
|
Gregory Nutt
|
3c38992727
|
SAMA5: Fix HSMCI race condition. Now memory card interface is functional with DMA
|
2013-08-10 18:01:23 -06:00 |
|
Gregory Nutt
|
6622714c5d
|
Rearrange configuration settings so that ARCH_HAVE_SDIO is moved to higher, sharable level
|
2013-08-10 09:06:53 -06:00 |
|
Gregory Nutt
|
75d0fc2a10
|
Extend the virtual-to-physical address conversion logic to handle NFS SRM, UDPH SRAM, and external SRAM and PSRAM.
|
2013-08-09 17:55:27 -06:00 |
|
Gregory Nutt
|
d8b3921972
|
SAMA5: Centralize logic for conversion between physical and virtual addresses
|
2013-08-09 17:25:53 -06:00 |
|
Gregory Nutt
|
ad6b8726c2
|
Fix some cache-related issues with the SAMA5 DMA driver
|
2013-08-09 15:25:13 -06:00 |
|
Gregory Nutt
|
a2ba8992a9
|
SAM3,4,A5 DMA fixes; SAMA5 SPI driver now supports DMA transfers
|
2013-08-09 13:12:16 -06:00 |
|
Gregory Nutt
|
2b36e7e266
|
SAMA5: Use RDR/TDR registers for DMA, not FIFO registers; change DMA bit settings to match Atmel example. Still no DMA
|
2013-08-08 15:51:16 -06:00 |
|
Gregory Nutt
|
53c4a1e647
|
SAMA5 DMA: Need to flush caches; DMA channel depends upon direction of DMA; the maximum transfer size in bytes depends on the number of bytes per transfer
|
2013-08-08 13:15:52 -06:00 |
|
Gregory Nutt
|
05242e41ef
|
More SAMA5 DMAC driver fixes. Still does not work.
|
2013-08-07 17:19:48 -06:00 |
|
Gregory Nutt
|
e015c6edd6
|
SAMA3,4,A5: Misc corrections to DMA and HSMCI drivers
|
2013-08-07 11:32:08 -06:00 |
|
Gregory Nutt
|
159635bc2a
|
Fix SAM bug: Parmaters reversed in DMA function call
|
2013-08-06 15:47:09 -06:00 |
|
Gregory Nutt
|
d1da100cf0
|
SAM3,4,A5 DMAC driver fixes
|
2013-08-06 13:27:48 -06:00 |
|
Gregory Nutt
|
03f24c7a1d
|
SAM3,4,A5: Fix some masked status checks that can generate false error reports
|
2013-08-06 12:36:56 -06:00 |
|
Gregory Nutt
|
dfe42d0254
|
SAMA5: A few early, easy bug fixes. The rest will all be difficult
|
2013-08-06 11:29:53 -06:00 |
|
Gregory Nutt
|
e8a34ea3ac
|
SAMA5: Add PIO interrupt support. Massive name changes for consistency in PIO vs GPIO naming. SAMA5D3x-EK: Add support for SD card detection PIO interrupts
|
2013-08-06 10:20:17 -06:00 |
|
Gregory Nutt
|
a68a3a0366
|
SAMA5: Add HSMCI memory card driver support
|
2013-08-05 16:21:24 -06:00 |
|
Gregory Nutt
|
cff3e713f1
|
SAMA5: SPI Driver + AT25 FLASH work; SAM3/4: Correct an error, SPI will not be correctly configured if CONFIG_SPI_OWNBUS=n
|
2013-08-05 10:29:43 -06:00 |
|
Gregory Nutt
|
36f4cb53dd
|
SAMA5: Add logic to auto-mount a file system on AT25 SPI FLASH for NSH
|
2013-08-05 08:24:39 -06:00 |
|
Gregory Nutt
|
412aaa83a2
|
SAMA5D3x-EK: At support for the AT25 serial FLASH
|
2013-08-04 16:56:41 -06:00 |
|
Gregory Nutt
|
5fe6e4df26
|
SAMA5: Add register level debug option for SPI
|
2013-08-04 14:45:24 -06:00 |
|
Gregory Nutt
|
d516baa73f
|
SAMA5: SPI driver now supports both SPI0 and SPI1
|
2013-08-04 12:50:20 -06:00 |
|
Gregory Nutt
|
487866b2b6
|
SAMA5: Add basic SPI suppport (untested)
|
2013-08-04 11:08:20 -06:00 |
|
Gregory Nutt
|
8194e6bbcf
|
SAMA5: Add DMA suppport (untested)
|
2013-08-04 10:44:18 -06:00 |
|
Gregory Nutt
|
a93b095ce4
|
SAMA5: Add DMA controller register definitions
|
2013-08-03 12:13:42 -06:00 |
|
Gregory Nutt
|
8b317e9ea3
|
Standard configuration variables used to enable interupt controller debug; SAMA5: Correct handling of spurious interrupts
|
2013-08-03 08:22:37 -06:00 |
|
Gregory Nutt
|
c7293535fe
|
Various changes to get SAMA5 SDRAM working. Marginally functional, but there is more to be done
|
2013-08-02 18:30:27 -06:00 |
|
Gregory Nutt
|
08a1ff5c79
|
Correct some typos int he MPADDRCS register address definitions
|
2013-08-02 12:06:11 -06:00 |
|
Gregory Nutt
|
b00d72a7f2
|
SAMA5: More MMU-related changes to properly initialize SDRAM
|
2013-08-02 11:11:57 -06:00 |
|
Gregory Nutt
|
894618f894
|
SAMA5: Add logic to initialize SAMA5D3x-EK on-board SDRAM
|
2013-08-01 16:58:55 -06:00 |
|
Gregory Nutt
|
70e1028d41
|
SAMA5: Add DDR controller register definitions
|
2013-08-01 12:27:41 -06:00 |
|
Gregory Nutt
|
35c3a49e1c
|
ARMv7-A: Map all of .text, .bss, .data., stacks before enabling the MMU and caching. This is simpler and avoids fears I have about caching
|
2013-08-01 10:05:33 -06:00 |
|
Gregory Nutt
|
f0e6d4f101
|
ARMv7-A: Separate CONFIG_PAGING start-up logic into a different startup file. Too much conditional compilation.
|
2013-08-01 07:41:00 -06:00 |
|
Gregory Nutt
|
b0045bc7e2
|
SAMA5: Add an NSH configuration of the SAMA5D3x-EK board
|
2013-07-31 10:46:13 -06:00 |
|
Gregory Nutt
|
8695c89aa4
|
SAMA5: Modification of some CPSR-related inline functions
|
2013-07-31 09:11:24 -06:00 |
|
Gregory Nutt
|
db20c5fc43
|
Fix Cortex-A CPSR register field definition
|
2013-07-30 19:05:24 -06:00 |
|
Gregory Nutt
|
391d300d4d
|
SAMA5: Change mapping of vector tables to work around that fact that I don't understand how the AXI MATRIX remap works
|
2013-07-30 16:19:52 -06:00 |
|
Gregory Nutt
|
16371b50e4
|
ARMv7-A: Add cp15_disable_dcache(); SAMA5: nor_main.c no disables MMU and caches; Should not remap ISRAM to address 0x0 unless we booted into ISRAM
|
2013-07-30 13:20:33 -06:00 |
|
Gregory Nutt
|
6f99994722
|
More DAC changes from John Wharington
|
2013-07-30 11:41:53 -06:00 |
|
Gregory Nutt
|
b75a0cf8be
|
Add ARMv7-A irqdisable() inline function
|
2013-07-30 11:37:09 -06:00 |
|
Gregory Nutt
|
84150fd7ed
|
STM32 F3 I2C driver from John Wharington
|
2013-07-30 10:35:17 -06:00 |
|
Gregory Nutt
|
4bdcceb3b3
|
STM32 DAC DMA fixes from John Wharington
|
2013-07-30 08:54:32 -06:00 |
|
Gregory Nutt
|
547f9be80f
|
SAMA5: More cache and mmu inline utility functions
|
2013-07-29 19:57:15 -06:00 |
|
Gregory Nutt
|
95998c715f
|
SAMA5: Separate cache operations into separate files
|
2013-07-29 18:38:02 -06:00 |
|
Gregory Nutt
|
f658bcdb13
|
Changes to ARMv7-A boot logic to handle the case where we execute out of NOR FLASH
|
2013-07-29 17:54:56 -06:00 |
|
Gregory Nutt
|
4e90fae5e8
|
Add SAMA5 HSMC register definitions and logic to reconfigure the NOR FLASH
|
2013-07-29 10:56:21 -06:00 |
|
Gregory Nutt
|
27a9da98f4
|
SAMA5: Add file structure to support board-specific initialization of NOR flash
|
2013-07-29 07:41:53 -06:00 |
|
Gregory Nutt
|
65c8abddb8
|
SAMA5: The ostest configuration have been converted to run out of NOR flash. There is more to be done, however
|
2013-07-28 15:07:35 -06:00 |
|
Gregory Nutt
|
7dfabf3507
|
SAMA5: Correct a clock configuration bug; clarify some MMU memory types
|
2013-07-28 12:44:06 -06:00 |
|
Gregory Nutt
|
f191ac94c0
|
SAMA5: Correct vector mapping
|
2013-07-28 09:44:11 -06:00 |
|
Gregory Nutt
|
9a5311296f
|
Removed unused ARMv7-A cache function
|
2013-07-27 14:03:02 -06:00 |
|
Gregory Nutt
|
ae6ed8ca52
|
SAMA5: Fix heap allocation bugs
|
2013-07-27 11:28:31 -06:00 |
|
Gregory Nutt
|
3d16c9afc7
|
SAMA5 page table is cached; need to flush the cache each time that the page table is updated
|
2013-07-27 09:27:37 -06:00 |
|
Gregory Nutt
|
87af1517ed
|
Correct an error in Cortex-A5 intermediate MMU mapping
|
2013-07-26 17:26:53 -06:00 |
|
Gregory Nutt
|
14093ef76a
|
Add a hello world configuration to help with the SAMA5 bringup
|
2013-07-26 15:28:01 -06:00 |
|
Gregory Nutt
|
2f772c84fd
|
Finally... renamed all CONFIG_DRAM_ settings to CONFIG_RAM_
|
2013-07-26 10:09:17 -06:00 |
|
Gregory Nutt
|
f87963accd
|
SAMA5: If the page table is in high memory, make sure that it is excluded from the heap
|
2013-07-26 09:16:46 -06:00 |
|
Gregory Nutt
|
4ea9e1eb6e
|
Fix some bad page table definitions of last commit
|
2013-07-25 18:11:25 -06:00 |
|
Gregory Nutt
|
696f6d0482
|
Misc Cortex-A5 MMU-related fix -- still does not boot
|
2013-07-25 16:37:55 -06:00 |
|
Gregory Nutt
|
d1be1e6698
|
Fix an uninitialized register error that crept into the ARM9 start up code many years ago and was recently cloned into the Cortex-A5. Obviously no on has used NuttX with ARM9 for years
|
2013-07-24 20:12:04 -06:00 |
|
Gregory Nutt
|
f337f3a977
|
Fix SAMA5 vector linking issue
|
2013-07-24 12:51:42 -06:00 |
|
Gregory Nutt
|
213780bc43
|
Update SAMA5D3x-EK board configuration to support on-board UART connections, LEDs, and push buttons
|
2013-07-24 12:27:12 -06:00 |
|
Gregory Nutt
|
63f136dd7e
|
Revamp the way external memory regions are configured; Add logic to add SAMA5 external memory regions to the heap
|
2013-07-24 10:08:32 -06:00 |
|
Gregory Nutt
|
a81abd3514
|
Improve Cortex-A5 context switching so that a little less copying is done
|
2013-07-24 07:47:51 -06:00 |
|
Gregory Nutt
|
2e8fcc7229
|
ARMv7-N: Fix a copy error introduced in the previous check-in
|
2013-07-23 19:09:17 -06:00 |
|
Gregory Nutt
|
cb3f394d53
|
Improve some ARMv7-A/M floating point register save time; Add floating point register save logic for ARMv7-A
|
2013-07-23 17:52:06 -06:00 |
|
Gregory Nutt
|
9e24c4fcd5
|
ARMv7-A: Need 8-byte stack alignment when callign C code from interrupt handlers. This change needs to be ported to other ARM architectures as well
|
2013-07-23 14:47:16 -06:00 |
|
Gregory Nutt
|
596cdf2982
|
SAMA5: Adapt clocking for different boot modes. New header files for AXI matrix, BSC, and SFR
|
2013-07-23 13:54:49 -06:00 |
|
Gregory Nutt
|
ae3f2b2876
|
Add SAMA5D3 pin multiplexing definitions
|
2013-07-23 09:47:01 -06:00 |
|
Gregory Nutt
|
e9f8689cee
|
Add SAMA5 GPIO configuration support
|
2013-07-22 20:59:47 -06:00 |
|
Gregory Nutt
|
50cd6352fa
|
Add support SAMA5 UART and serial driver
|
2013-07-22 19:16:37 -06:00 |
|
Gregory Nutt
|
9665c0d267
|
SAMA5 clock configuration should now agree with Atmel sample code; Added header file with macros to enable and disable peripheral clocking
|
2013-07-22 17:00:02 -06:00 |
|
Gregory Nutt
|
571308c27a
|
Add SAMA5 clock logic. Cloned from SAM3U and not yet verified
|
2013-07-22 14:42:05 -06:00 |
|
Gregory Nutt
|
fb8a7a91fb
|
SAMA5 interrupt handling logic
|
2013-07-22 11:54:39 -06:00 |
|
Gregory Nutt
|
ca9b52b07f
|
SAMA5/Cortex-A: Improve irqsave/restore inlines + add irqenable. Add skeleton file for SAMA5 interrupt management. Also change from last commit that was left in the editor
|
2013-07-21 17:08:40 -06:00 |
|
Gregory Nutt
|
b26d506514
|
Add system timer logic for the SAMA5
|
2013-07-21 15:49:17 -06:00 |
|
Gregory Nutt
|
0b46176b43
|
A few more Cortex-A5 and SAMA5 files
|
2013-07-21 12:52:38 -06:00 |
|
Gregory Nutt
|
0d9250fae5
|
Misc Cortex-A5 changes include new file for cache operations
|
2013-07-20 13:06:00 -06:00 |
|
Gregory Nutt
|
6f0e07d071
|
A few more SAMA5D3 files
|
2013-07-19 17:45:28 -06:00 |
|
Gregory Nutt
|
137cd94b6a
|
Basic framework to support the AT91SAMA5D3 family and the SAMA5D3x-EK board(s) in particular
|
2013-07-19 15:23:03 -06:00 |
|
Gregory Nutt
|
c294e9b374
|
More ARMv7-A files that are just copies of the ARMv4/5 files for now
|
2013-07-19 11:43:04 -06:00 |
|
Gregory Nutt
|
15ae557793
|
Minor but fatal typo introduced in last checkin
|
2013-07-18 15:45:21 -06:00 |
|
Gregory Nutt
|
28a90ba46d
|
Some initial frame for Cortex-A5 support. No much yet
|
2013-07-18 15:20:47 -06:00 |
|
Gregory Nutt
|
91313feac2
|
NSH cmp command by Andrew Twidgell
|
2013-07-18 08:24:29 -06:00 |
|
Gregory Nutt
|
78bffd06c2
|
STM32 SDIO driver: Add supported for data block end (DBCKEND) interrupt. From Chia Cheng Tsao
|
2013-07-08 09:04:05 -06:00 |
|
Gregory Nutt
|
d649c2a462
|
Ticket #16: STM32 OTG FS device driver endpoint allocation. From Chia Cheng Tsao
|
2013-07-08 08:55:05 -06:00 |
|
Gregory Nutt
|
dcb4545afb
|
prohibit re-entrance into sam_configgpio()
|
2013-07-05 17:15:54 -06:00 |
|
Gregory Nutt
|
d5f274ac76
|
Fix SAM34 interrupt handling for ports D-F; fix MISO logic in Arduino Due touchscreen driver
|
2013-07-03 08:12:45 -06:00 |
|
Gregory Nutt
|
348304fcb4
|
Several fixes to get a clean compile of the Arduino touch screen
|
2013-07-02 13:52:09 -06:00 |
|
Gregory Nutt
|
a954eb76b2
|
Created new directories to hold SPI-related files
|
2013-07-01 08:11:54 -06:00 |
|
Gregory Nutt
|
5c86557971
|
Update LM FLASH definitions for LM4F120. From Vinti
|
2013-06-29 07:02:56 -06:00 |
|
Gregory Nutt
|
4db87105e9
|
SAM33/4: Need to disable write protection before modify PIO pin configuration
|
2013-06-28 15:34:51 -06:00 |
|
Gregory Nutt
|
880d7f261b
|
Add an NSH configuration for the Arduino Due; Pluse several fixes related to the Due and to the SAM3X in general
|
2013-06-28 14:32:08 -06:00 |
|
Gregory Nutt
|
4fe041a10b
|
Arduino Due: Fixes to FLASH address, flash wait states, updated Comments. Now boots and runs a bit before crashing
|
2013-06-28 11:29:14 -06:00 |
|
Gregory Nutt
|
8f41963efd
|
With these changes the Arduino Due port builds without errors
|
2013-06-27 15:07:07 -06:00 |
|
Gregory Nutt
|
2ecac742b6
|
Flesh out the Arduino Due board configuratino and integrate it with the build and configuration system
|
2013-06-27 14:24:27 -06:00 |
|
Gregory Nutt
|
3910edbf90
|
Review and update of SAM3/4 header files and conditional logic for SAM3X/A support
|
2013-06-27 11:06:13 -06:00 |
|
Gregory Nutt
|
77b36e0bc1
|
Add peripheral configuration logic for the SAM3X/3A; Change all references to SAM3/4 SPI to SPI0 for compatibity with the SAM3X/3A which has SPI0 and SPI1; Add directory which will eventually holdl an Arduino Due port
|
2013-06-26 18:46:44 -06:00 |
|
Gregory Nutt
|
69bd94290a
|
Add SAM3X/3A pin multiplexing and GPIO encoding header files
|
2013-06-26 17:02:43 -06:00 |
|
Gregory Nutt
|
87cfee43af
|
Add SAM3X/3A memory map
|
2013-06-26 14:37:57 -06:00 |
|
Gregory Nutt
|
ae6dbb9bf9
|
Add SAM3X/3A peripheral clock controls
|
2013-06-26 14:00:26 -06:00 |
|
Gregory Nutt
|
8865cf8be0
|
Add SAM3X/3A interrupt vectors
|
2013-06-26 12:59:56 -06:00 |
|
Gregory Nutt
|
2812f5be67
|
Add support for SAM3X and 3A chips, interrupts, and peripheral IDs
|
2013-06-26 12:28:32 -06:00 |
|
Gregory Nutt
|
64d149233b
|
Fix integration of RAM test into the build and configuration system
|
2013-06-26 10:54:12 -06:00 |
|
Gregory Nutt
|
e00a8397bc
|
Add support for a separate CCM memory allocator for members of the STM32 family that support CCM memory
|
2013-06-25 09:13:30 -06:00 |
|
Gregory Nutt
|
22c3d49807
|
SAM4L Xplained SLCD driver is complete
|
2013-06-23 09:05:20 -06:00 |
|
Gregory Nutt
|
c21986c418
|
Beginning of a driver for the SAM4L LED1 module
|
2013-06-21 17:42:09 -06:00 |
|
Gregory Nutt
|
7a65c32d4b
|
Straighten out issues about who calls C++ initializers with CXXTEST or HELLOXX are built as NSH applications; Add an ofstream test to CXXTEST suggested by Michael; Update many defconfig fiels to that they set configurations to handle C++ constructors just as before these configuration changes
|
2013-06-21 09:32:57 -06:00 |
|
Gregory Nutt
|
4fded8a25c
|
More KL25Z SPI fixes
|
2013-06-20 19:58:45 -06:00 |
|
Gregory Nutt
|
6e2fe7ccaf
|
KL25Z GPIO register dump function now compiles
|
2013-06-20 18:00:56 -06:00 |
|
Gregory Nutt
|
d088cbec5b
|
Fix backward wait condition in KL24Z SPI driver
|
2013-06-20 17:39:42 -06:00 |
|
Gregory Nutt
|
2e40a98c74
|
Add framework for managing SPI-related discretes on the Freedom KL25Z board.
|
2013-06-20 13:50:16 -06:00 |
|
Gregory Nutt
|
3c05e28e6d
|
More Freedom KL25Z changed to and from Alan Carvalho de Assis
|
2013-06-19 20:50:27 -06:00 |
|
Gregory Nutt
|
bdc68f73ad
|
Fix errors in KL25Z SPI driver reported by Alan Carvalho de Assis
|
2013-06-19 19:32:13 -06:00 |
|
Gregory Nutt
|
f3781d1eec
|
Add SAM4L PDCA register definition file
|
2013-06-19 18:38:31 -06:00 |
|
Gregory Nutt
|
e377bab446
|
SPI register definition file updated to include a few differences for the SAM4L
|
2013-06-19 16:03:19 -06:00 |
|
Gregory Nutt
|
c9ed0f9120
|
SAM4L LCDCS register definitions
|
2013-06-19 13:59:47 -06:00 |
|
Gregory Nutt
|
23579f3af4
|
Add SPI driver for the Freescale KL25Z
|
2013-06-19 12:10:01 -06:00 |
|
Gregory Nutt
|
5368531d60
|
Add SPI register definitions for the Freescale KL25Z
|
2013-06-19 09:56:32 -06:00 |
|
Gregory Nutt
|
49ad89dd70
|
Fix test of NULL pointer in the SAM3/4 SPI driver
|
2013-06-18 12:16:52 -06:00 |
|
Gregory Nutt
|
a56bf3f8b3
|
Freescale KL25Z support from Alan Carvalho de Assis
|
2013-06-18 11:20:57 -06:00 |
|
Gregory Nutt
|
7e372171c2
|
SAM3/4 SPI phase control (CPHA) is inverted
|
2013-06-18 09:29:55 -06:00 |
|
Gregory Nutt
|
2d6a50a1ce
|
Corrections to the Kinetis TSI header file from Alan Carvalho de Assis
|
2013-06-18 07:14:05 -06:00 |
|
Gregory Nutt
|
db66a5a313
|
SAM3U-EK: Correct polarity of the PENIRQ signal
|
2013-06-16 14:31:18 -06:00 |
|
Gregory Nutt
|
ab84bdd2d8
|
Re-architected SAM3/4 SPI interface; Change BUSY bit handling in the ADS7843E driver
|
2013-06-16 10:09:21 -06:00 |
|
Gregory Nutt
|
20fdf8161f
|
Add support for the SAM4L Xplained Pro I/O1 module
|
2013-06-15 10:56:08 -06:00 |
|
Gregory Nutt
|
d7fb126a61
|
Fixes for SAM4S and 4L due to recent changes to SAM3S; Updated README files
|
2013-06-14 08:54:24 -06:00 |
|
Gregory Nutt
|
c5169b092a
|
SAM3/4S GPIO interrupt changes
|
2013-06-13 18:53:14 -06:00 |
|
Gregory Nutt
|
f7edd7a31c
|
SAM3/4: Loop counter for PLL delay must be volatile or it may get optimized away
|
2013-06-13 16:18:25 -06:00 |
|
Gregory Nutt
|
2bce348e0f
|
SAM3/4: Some minor design improvements to the SAM3/4 serial driver
|
2013-06-13 15:16:52 -06:00 |
|
Gregory Nutt
|
9f590e5228
|
Fix error in AT91SAM SPI driver introduced in recent comment. Varioius improvements to README files and debug output
|
2013-06-13 13:38:31 -06:00 |
|
Gregory Nutt
|
e6a3078b77
|
Add support for a generic windows-based EABI toolchain; Add NX configuration to force default NXTK border colors
|
2013-06-13 11:04:18 -06:00 |
|
Gregory Nutt
|
0762d45517
|
Correct border colors for SAM3U-EK border; clean up some comments; make sure that sam_vectors.S is identical to stam32_vectors.S
|
2013-06-12 19:42:39 -06:00 |
|
Gregory Nutt
|
30a572d244
|
Remove CONFIG_XYZ_BUILTIN configurations, replace with the single CONFIG_NSH_BUILTIN_APPS. Add SAM3/4 sam_periphclks.h which is just a header file that includes the right header file. Misc SAM3U-EK cleanup
|
2013-06-12 17:32:00 -06:00 |
|
Gregory Nutt
|
42e63b437e
|
Misc updates to SAM3U register definition files for SAM4S compatibility
|
2013-06-12 12:35:48 -06:00 |
|
Gregory Nutt
|
677365210e
|
SAM4S: Add NSH configuration. Calibrated delay loops. Port now seems fully functional
|
2013-06-12 10:56:42 -06:00 |
|
Gregory Nutt
|
c0a0de6593
|
Correct SAM3S-Xplained load address, FLASH wait states, and UART1 pin configuration
|
2013-06-12 08:18:42 -06:00 |
|
Gregory Nutt
|
a42a382b70
|
Use UART1 for the console on the SAM4S-Xplained not USART0
|
2013-06-11 19:24:47 -06:00 |
|
Gregory Nutt
|
ea776434ba
|
Changes for a clean build of configs/sam4s-xplained
|
2013-06-11 17:33:43 -06:00 |
|
Gregory Nutt
|
42a46aa55f
|
Add configs/sam4s-xplained
|
2013-06-11 16:29:59 -06:00 |
|
Gregory Nutt
|
1b57fdd7dd
|
SAM4S: Add macros to manage peripheral clocks
|
2013-06-11 15:42:30 -06:00 |
|
Gregory Nutt
|
93ee6cb291
|
SAM4S: Add pin multiplexing definitions
|
2013-06-11 14:32:07 -06:00 |
|
Gregory Nutt
|
3fb47dae74
|
SAM4S: GPIO, chip characteristics, peripheral Kconfig
|
2013-06-11 12:28:31 -06:00 |
|
Gregory Nutt
|
6576156731
|
SAM4S: Add memory map and interrupt logic
|
2013-06-10 16:18:47 -06:00 |
|
Gregory Nutt
|
ae4cbd44c7
|
Beginning updates of SAM3U header files o include support for the SAM4S: WDT, SUPC, EEFC, MATRIX, and PMC
|
2013-06-10 11:57:37 -06:00 |
|
Gregory Nutt
|
617a0225cc
|
SAM4L: Extend interrupt support for the larger number of NVIC interrupts of the SAM4L
|
2013-06-09 13:00:38 -06:00 |
|
Gregory Nutt
|
2f4ae2f2b0
|
SAM4L: Add an NSH configuration and C++ support
|
2013-06-09 11:43:20 -06:00 |
|
Gregory Nutt
|
bae87a0ea1
|
SAM4L: Mic fixes to get the SAM4L Xplained running. The ostest now passes.
|
2013-06-09 10:57:42 -06:00 |
|
Gregory Nutt
|
91d6ebfa0e
|
SAM3U/4L changes to hide differences by clocking in those MCUs
|
2013-06-08 13:50:42 -06:00 |
|
Gregory Nutt
|
04d573e3a8
|
SAM4L: Add USART/UART register definition header files
|
2013-06-08 11:39:06 -06:00 |
|
Gregory Nutt
|
c28bf69735
|
SM4L: USB clock configuration and WDT register definition file
|
2013-06-08 09:21:20 -06:00 |
|
Gregory Nutt
|
0173b72281
|
SAM4L: Add logic to configure FLASH read mode and wait states
|
2013-06-07 18:12:00 -06:00 |
|
Gregory Nutt
|
4538b2c468
|
SAM4L: Add logic to enable selected peripherals on power up; Extend configuration so that each peripheral can be selected -- even though the drivers are not yet implemented
|
2013-06-07 14:59:33 -06:00 |
|
Gregory Nutt
|
8d72772a11
|
SAM4L: Add DFLL0 support, add logic to set the power scaling mode, add support for RAM functions
|
2013-06-07 13:26:55 -06:00 |
|
Gregory Nutt
|
5dd03676dc
|
Update SAM4L PLL0 logic
|
2013-06-07 10:28:06 -06:00 |
|
Gregory Nutt
|
0ddc440df5
|
Add logic to enable SAM4L clocks
|
2013-06-06 19:11:32 -06:00 |
|
Gregory Nutt
|
9149253356
|
Add SAM4L BSCIF register definition file
|
2013-06-06 16:24:33 -06:00 |
|
Gregory Nutt
|
1029074cc6
|
Fix a backward conditional that cause the STM32 usb host driver to fail to detect disconnection events. From Scott
|
2013-06-06 15:00:18 -06:00 |
|
Gregory Nutt
|
78681b6d8f
|
Add flow control support to the STM32 serial driver; Fix some issues with UART2 and 5. From Lorenz Meier and Mike Smith
|
2013-06-06 14:49:14 -06:00 |
|
Gregory Nutt
|
0678780f2d
|
Add register definitions for SAM4L BPM and SCIF blocks
|
2013-06-06 11:19:18 -06:00 |
|
Gregory Nutt
|
4055f6d697
|
Add register definitions for SAM4L BPM and SCIF blocks; SAM4L clock initialization now selects an optimal power scaling mode
|
2013-06-06 11:18:52 -06:00 |
|
Gregory Nutt
|
3e823e5468
|
Move SAM4L peripheral clock logic to a separate file
|
2013-06-05 18:48:30 -06:00 |
|
Gregory Nutt
|
652f78a2eb
|
Updates to SAM4L clocking. Still not finished
|
2013-06-05 16:41:52 -06:00 |
|
Gregory Nutt
|
888fc75439
|
Add power management register defintions and clock control logic for the SAM4L
|
2013-06-05 13:35:19 -06:00 |
|
Gregory Nutt
|
29319297f7
|
Add SAM4L FLASHCALW header file
|
2013-06-05 10:43:33 -06:00 |
|
Gregory Nutt
|
e7048af396
|
SAM4L GPIO port addressing fixes; SAM4L Xplained LED support; minor documentation updates
|
2013-06-05 08:54:37 -06:00 |
|
Gregory Nutt
|
c98edc3451
|
Add configs/sam4l-xplained/src/up_userleds.c
|
2013-06-04 16:35:43 -06:00 |
|
Gregory Nutt
|
4277a2ffbb
|
More changes that should have gone with the last commit
|
2013-06-04 15:23:47 -06:00 |
|
Gregory Nutt
|
a9d4892c91
|
Add SAM4L GPIO driver
|
2013-06-04 15:12:56 -06:00 |
|
Gregory Nutt
|
f3ea5221b8
|
Create SAM4L GPIO driver header file
|
2013-06-04 13:33:30 -06:00 |
|
Gregory Nutt
|
892211f263
|
Add SAM4L (and 4S) GPIO register definitions
|
2013-06-04 11:38:23 -06:00 |
|
Gregory Nutt
|
2f44f642dd
|
If CONFIG_STM32_DMACAPABLE is defined, use stm32_dmacapable to workaround attempt SPI DMAs from the CCM stack
|
2013-06-04 09:05:39 -06:00 |
|
Gregory Nutt
|
1c3116c91e
|
Add stm32_dmacapable interface to determine is it is possible to perform DMA from a given address.
|
2013-06-04 08:44:49 -06:00 |
|
Gregory Nutt
|
56045e0dde
|
SAM4L alternate pin mapping header file; Use USART1 for virtual COM port console
|
2013-06-03 17:53:05 -06:00 |
|
Gregory Nutt
|
77f84ae94d
|
Add a skeleton configuration that will eventually support the SAM4L Xplained Pro board
|
2013-06-03 15:11:56 -06:00 |
|
Gregory Nutt
|
9e8ed732da
|
Add vector and chip cability definitions for the SAM4L family
|
2013-06-03 11:23:41 -06:00 |
|
Gregory Nutt
|
d4b3514c85
|
Add interrupt and memory map definitions for the AT91SAM4L
|
2013-06-03 09:32:04 -06:00 |
|
Gregory Nutt
|
e9859095dc
|
Rename sam3u/ architecture directories to sam34/ to include the SAM4L
|
2013-06-02 13:57:22 -06:00 |
|
Gregory Nutt
|
5d7b246c8a
|
Add missing NSH configuration settings. Correct some conditional logic for STM32 FALSH pre-fetch settings. From Lorenz Meier
|
2013-06-02 13:16:35 -06:00 |
|
Gregory Nutt
|
cfd63d53ad
|
Eliminated sam3u_internal.h. Use separate header files instead. More renaming from sam3u_ to sam_ to make room in the namespce for the sam4l_
|
2013-06-02 13:04:40 -06:00 |
|
Gregory Nutt
|
308e3f528d
|
Move SAM3U header files to arch/arm/src/sam3u/chip. Some renaming of SAM3U to SAM to ssupport SAM4. Convert all configs/sam3u-ek configurations to use the kconfig-frontends tool
|
2013-06-02 10:33:57 -06:00 |
|
Gregory Nutt
|
8ff1402958
|
.dSYM only needs to be in the same .gitignore files as .exe
|
2013-05-30 15:02:04 -06:00 |
|
Gregory Nutt
|
f0c36e422f
|
Upate .gitignore files. Add .dSYM. Make sure / is present where needed. Add some missing .gitignore files
|
2013-05-30 14:45:31 -06:00 |
|
Gregory Nutt
|
011a14e39d
|
Fix STM32F1 and F3 USB device driver. It was not handling NULL packets correctly and it prevent use of the driver with the CDC/ACM class
|
2013-05-29 10:26:00 -06:00 |
|
Gregory Nutt
|
9336f73aa1
|
Add support for the STM32 Tiny development board from Laurent Latil
|
2013-05-28 14:24:17 -06:00 |
|