There is a good case on sim platform:
When we input some cmd and click enter key to start application in terminal,
this context will change to application from IDLE loop. Althrough entey key '\r'
has been received to recv buffer and complete post semaphore of reader, but
pollnotify may not be called because context change. So when application run
poll function, because no events happend and poll enter wait, context will
again change to IDLE loop, this pollnotify of IDLE loop will run to send poll
events, poll function of applicaton will wake up. It's wrong!
Change-Id: I812a889f2e90781a9c3cb4b0251cccc4d32bebd1
Signed-off-by: dongjiuzhu <dongjiuzhu1@xiaomi.com>
Summary:
- Modify arm_intstack_base() to return "top" of the IRQ stack for the current CPU
- This change fixes IRQ stack dump information for ARM SMP
- Add arm_intstack_alloc() to return "bottom" of the IRQ stack for the current CPU
- Also, these functions are now implemented in xxx_irq.c (imx/cxd56/lc823450)
- up_color_intstack() and up_check_intstack() now call arm_intstack_alloc()
- These semantics are now consistent with non-SMP case
- up_color_intstack() now initializes whole IRQ stack region for SMP
- Adjust IRQ stack top address for each CPU (e.g. -8)
- Fix setintstack to handle in case of NCPUS=1 (cxd56, lc823450)
- Adjust INTSTACK_SIZE to 8 bytes alignment (cxd56, lc823450)
- Refactor setintstack for lc823450
- Remove old IRQ stack coloring code from up_irqinitialize() (lc823450)
- Introduce g_cpu_intstack_top for lc823450
- Refactor header files
Impact:
- Affects imx6/cxd56xx/lc823450 SMP with interrupt stack enabled
Testing:
- Tested with sabre-6quad:smp (with QEMU, NCPUS=1 and 4)
- Tested with spresense:wifi_smp (NCPUS=1 and 2)
- Tested with lc823450-xgevk:rndis (NCPUS=1 and 2)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
cfsetispeed() now stores baud rate to c_cflag member of
struct termios, so it must not be overridden later on.
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
1.Get the stack pointer from sp instead of .Lstkinit's field
2.Make g_idle_topstack point to the end of the idle stack
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
arch/arm/src/tiva/cc13xx/cc13x0_rom.h,
arch/arm/src/tiva/cc13xx/cc13x2_cc26x2_v2_rom.h:
* Fix nxstyle errors; nxstyle was complaining about lack of a
space after comma because of the presence of line
continuation backslashes immediately after the comma.
Removed these backslashes as they are not necessary: these
lines are typedefs, not preprocessor defines.
arch/arm/src/tiva/cc13xx/cc13x2_v2_trim.c:
* Fix nxstyle errors.
* No functional changes; however modified one function,
trim_wakeup_fromshutdown(), to avoid blocks that existed
only to declare variables mid-function; nxstyle was
complaining about the positions of the opening and
closing braces of those blocks.
Summary:
- During Wi-Fi audio streaming test, I noticed data corruption in tcb
- Finally, I found an issue in IRQ request handing with IPI
- This commit fixes this issue
Impact:
- Affects SMP only
Testing:
- Tested with spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit adds interrupt stack for SMP
Impact:
- Affects SMP only
Testing:
- Tested with spresense:wifi_smp with CONFIG_ARCH_INTERRUPTSTACK=2048
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- The handle_irqreq() is used for remote IRQ control.
- The logic is called via IPI (Inter-Processor Interrupt)
- And the handler should handle only one request
- However, I noticed that the handler handles up to two requests
- This commit fixes this issue
Impact:
- Affects SMP cases only
Testing:
- Tested with spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
