Devices connected to the same USB bus should have unique function addresses.
This was not true for root hubs with multiple ports. After this change,
enumeration is more reliable on the sama5d3-xplained board when both root hub
ports are used.
This change amounts to using one usbhost_devaddr_s object per root hub
instead of one per root hub port. For the majority of boards only one
root hub port is available so no change in behavior should be expected.
replace all GPIO_MODE_xxMHz with GPIO_MODE_2MHz provide GPIO_ADJUST_MODE
and add legacy pinmap
For the stm32F1 pinmaps should not have contained GPIO_MODE_50MHz settings
on all pins. Speed is board dependent.
This change adds CONFIG_STM32_USE_LEGACY_PINMAP to allow for
lazy migration to using pinmaps that can have the GPIO_MODE_xxMHz set.
The work required to do this can be aided by running tools/stm32_pinmap_tool.py.
The tools will take a board.h, and use all the defconfigs with the legacy
pinmap and output the required changes that one needs to make to a board.h
file.
Eventually, CONFIG_STM32_USE_LEGACY_PINMAP will be deprecated and the legacy
pinmaps removed from NuttX.
Any new boards added should set CONFIG_STM32_USE_LEGACY_PINMAP=n and
fully define the pins in board.hf1
Pinmaps should not have contained GPIO_SPEED_xxx settings.
This is board dependent.
This change adds CONFIG_STM32_USE_LEGACY_PINMAP to allow for
lazy migration to using pinmaps without speeds.
The work required to do this can be aided by running tools/stm32_pinmap_tool.py.
The tools will take a board.h file and a legacy pinmap and outut the required
changes that one needs to make to a board.h file.
Eventually, STM32_USE_LEGACY_PINMAP will be deprecated and the legacy
pinmaps removed from NuttX.
Any new boards added should set STM32_USE_LEGACY_PINMAP=n and
fully define the pins in board.h
Pinmaps should not have contained GPIO_SPEED_xxx settings.
This is board dependent.
This change adds CONFIG_STM32_USE_LEGACY_PINMAP to allow for
lazy migration to using pinmaps without speeds.
The work required to do this can be aided by running tools/stm32_pinmap_tool.py.
The tools will take a board.h file and a legacy pinmap and outut the required
changes that one needs to make to a board.h file.
Eventually, STM32_USE_LEGACY_PINMAP will be deprecated and the legacy
pinmaps removed from NuttX.
Any new boards added should set STM32_USE_LEGACY_PINMAP=n and
fully define the pins in board.h
Pinmaps should not have contained GPIO_SPEED_xxx settings.
This is board dependent.
This change adds CONFIG_STM32_USE_LEGACY_PINMAP to allow for
lazy migration to using pinmaps without speeds.
The work required to do this can be aided by running tools/stm32_pinmap_tool.py.
The tools will take a board.h file and a legacy pinmap and outut the required
changes that one needs to make to a board.h file.
Eventually, STM32_USE_LEGACY_PINMAP will be deprecated and the legacy
pinmaps removed from NuttX.
Any new boards added should set STM32_USE_LEGACY_PINMAP=n and
fully define the pins in board.h
Pinmaps should not have contained GPIO_SPEED_xxx settings.
This is board dependent.
This change adds CONFIG_STM32_USE_LEGACY_PINMAP to allow for
lazy migration to using pinmaps without speeds.
The work required to do this can be aided by running tools/stm32_pinmap_tool.py.
The tools will take a board.h file and a legacy pinmap and outut the required
changes that one needs to make to a board.h file.
Eventually, STM32_USE_LEGACY_PINMAP will be deprecated and the legacy
pinmaps removed from NuttX.
Any new boards added should set STM32_USE_LEGACY_PINMAP=n and
fully define the pins in board.h
Pinmaps should not have contained GPIO_SPEED_xxx settings.
This is board dependent.
This change adds CONFIG_STM32_USE_LEGACY_PINMAP to allow for
lazy migration to using pinmaps without speeds.
The work required to do this can be aided by running tools/stm32_pinmap_tool.py.
The tools will take a board.h file and a legacy pinmap and outut the required
changes that one needs to make to a board.h file.
Eventually, STM32_USE_LEGACY_PINMAP will be deprecated and the legacy
pinmaps removed from NuttX.
Any new boards added should set STM32_USE_LEGACY_PINMAP=n and
fully define the pins in board.h
Otherwise, a request will never be transferred and there is no
information to the user that something is wrong.
For example, when using default values for TXFIFO in HS mode,
USBMSC will never work because the maximum request len is 512B
which is lower than the default TXFIFO size for IN EP.
This reverts commit 62c15c03d3.
Fix warning: the choice symbol STM32_FLASH_CONFIG_G (defined at arch/arm/src/stm32/Kconfig:1275) is selected by the following symbols, but select/imply has no effect on choice symbols
- ARCH_CHIP_STM32F412ZG (defined at arch/arm/src/stm32/Kconfig:1014)
struct stm32_i2c_inst_s instance is allocated on every call to
stm32_i2cbus_initialize, and that instance is supposed to be deleted on every
call to stm32_i2cbus_uninitialize.
The "refs" counter just keeps track on when the last one is deleted, and
everything is unregisterd/disabled.
This reverts commit 8098c80338.
