arch/arm/src/stm32/Kconfig:
* In configs STM32_ADC_MAX_SAMPLES, STM32_FOC_HAS_PWM_COMPLEMENTARY:
Fix typos in help text.
arch/arm/src/stm32h7/Kconfig:
* In configs STM32H7_RTC_AUTO_LSECLOCK_START_DRV_CAPABILITY,
STM32H7_FLASH_CR_PSIZE, STM32H7_RTC_LSECLOCK_START_DRV_CAPABILITY,
and STM32H7_RTC_LSECLOCK_RUN_DRV_CAPABILITY: Fix typos in help text.
arch/arm/src/stm32l5/Kconfig:
* In configs STM32L5_FLOWCONTROL_BROKEN, STM32L5_SDMMC1_DMAPRIO: Fix
typos in help text.
arch/arm/src/stm32/hardware/stm32_exti.h:
* Change STM32_EXTI2_OFFSET (offset to EXTI2 registers) from 0x18
to 0x20. This symbol is defined when CONFIG_STM32_STM32F30XX or
CONFIG_STM32_STM32F33XX. According to the current reference
manuals for STM32F334xx (RM0364 rev 4) and STM32F302xx (RM0365
rev 8), EXTI_IMR1 is at offset 0x00 and EXTI_IMR2 is at offset
0x20, i.e., 0x20 apart. The same offset applies to the rest of
the registers: EMR1/EMR2, RTSR1/RTSR2, etc.
it's more simple to make mm_heap_s opaque outside of mm
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I5c8e435f6baba6d22b10c5f7e8d9191104fb5af2
For the case when the watchdog is triggering a timeout we did not
correctly reset the GPIO_SDIO_D0.
Without this fix, the SD card can become inaccessible.
since kernel component should use UTC instead local time
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Icf939e1ab0af8e577105f539d2553bc67b3b3d10
corrected setting SDMMC_DCTRL.DTMODE field for block data transfers ending on block count
and for block data transfers ending with STOP_TRANSMISSION command;
stm32_sdio: added more debug messages
Sebastien Lorquet has submitted the CLA
Uros Platise has submitted the CLA
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Drop to user-space in kernel/protected build with up_pthread_exit,
now all pthread_cleanup functions executed in user mode.
* A new syscall SYS_pthread_exit added
* A new tcb flag TCB_FLAG_CANCEL_DOING added
* up_pthread_exit implemented for riscv/arm arch
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
For unknown reasons this message may interferre with the calibration
procedure and result in invalid calibariton data.
We leave only a message informing about the end of the the calibration.
The problem was observed for STM32G4 + IHM16M1.
Change the logic for allocating user heap for PROTECTED_BUILD:
- Don't rely on SRAM1_END alignment
- Make better use of MPU subregions when allocating the heap
- Don't duplicate the calculation of user heap start in kernel heap
allocation; use the previous calculation directly
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
All supported arch uses a push-down stack:
The stack grows toward lower addresses in memory. The stack pointer
register points to the lowest, valid working address (the "top" of
the stack). Items on the stack are referenced as positive(include zero)
word offsets from sp.
Which means that for stack in the [begin, begin + size):
1.The initial SP point to begin + size
2.push equals sub and then store
3.pop equals load and then add
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Ken Pettit has submitted the ICLA and we can migrate the licenses
to Apache.
Sebastien Lorquet has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
That field is never used and, in most cases, is never initialized correctly.
This should have no impact to anything with the possible exception of free-running drivers.
Verified using CI builds only.
Marco Krahl has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt, S.A has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This change makes it so that the timeout is set as part of the SDIO_WAITENABLE call instead of the SDIO_EVENTWAIT call. By doing so, you eliminate all opportunity for a race condition.
stm32h7:sdmmc Check if busy ended early
Several licenses were missed in the initial work
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Laurent Latil has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Pierre-Noel Bouteville has submitted the ICLA and we can migrate the licenses
to Apache.
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Uros Platise has submitted the ICLA and we can migrate the licenses
to Apache.
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Bob Feretich has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Neil Hancock has submitted the ICLA and we can migrate the licenses
to Apache.
Mateusz Szafoni has submitted the ICLA and we can migrate the licenses
to Apache.
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Max Holtzberg has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Mateusz Tomasz Szafoni has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
The maximum number of samples which can be handled without overrun depends on various factors.
This is the user's responsibility to correctly select this value.
Since the interfece to update the sampling time is available for all supported devices,
the user can change the default vaules in the board initialization logic and avoid ADC overrun.
For example Windows RNDIS driver issues SETUP requests that are 76 bytes
long. Previously NuttX would read them all, but only if they arrive at
the same time. If host transfer scheduling causes a pause between the
two DATA packets, stm32_ep0out_receive() would proceed with an incomplete
transfer. The rest of the data could either be skipped by the error handler
branch, or be left in NAK state forever, stopping any further communication
on the endpoint.
This commit changes it so that the whole transfer has to be received before
SETUP handler is called. Depending on CONFIG_USBDEV_SETUP_MAXDATASIZE any
excess bytes will be discarded, but doing this in a controlled way ensures
deterministic behavior. In the specific case of RNDIS, the trailing bytes
are unused padding bytes and can be safely discarded.
arch/arm/src/stm32/Kconfig:
* configs ARCH_CHIP_STM32G431K, ARCH_CHIP_STM32G431C,
ARCH_CHIP_STM32G431R, ARCH_CHIP_STM32G431M, and
ARCH_CHIP_STM32G431V: Fix copy/paste of incorrect
names shown in the Kconfig menu.
David Sidrane has submitted the ICL and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Summary:
- This commit changes spinlock APIs (spin_lock_irqsave/spin_unlock_irqrestore)
- In the previous implementation, the global spinlock (i.e. g_irq_spin) was used.
- This commit allows to use caller specific spinlock but also supports to use
g_irq_spin for backword compatibility (In this case, NULL must be specified)
Impact:
- None
Testing:
- Tested with the following configurations
- spresnse:wifi, spresense:wifi_smp
- esp32-devkitc:smp (QEMU), sabre6-quad:smp (QEMU)
- maxi-bit:smp (QEMU), sim:smp
- stm32f4discovery:wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
The stm32f412 was not a clean port. This is one step to fix
it. The shortcuts taken has caused more wasted hours finding
bad pin mappings then doing the job correctlry to begin with.
stm32:Kconfig Add CAN2 on STM32F412
When the architectural support for STM32G4 family was added, the
reference manual (RM0440) was at revision 2. Since then, it has
undergone several revisions. One significant change is in the
table of FLASH wait states: section 3.3.3 table 9. The outcome
of this change is that fewer FLASH wait states are needed for
most CPU clock (HCLK) frequencies. Notably, if running the CPU
clock at the maximum 170 MHz, only 4 FLASH wait states are
needed, rather than the previously programmed 8 wait states.
This gives a noticeable performance boost.
arch/arm/src/stm32/stm32g4xxxx_rcc.c:
* FLASH_ACR_LATENCY_SETTING: Reimplement compile-time logic
that selects the required wait state setting to use the new
updated table.
* Update all comments to indicate that RM0440 Rev 5 is used.
* Update section numbers mentioned in comments in cases where
they have changed due to added sections in the manual.
arch/arm/src/stm32/hardware/stm32_adc_v2g4.h:
* New file.
arch/arm/src/stm32/hardware/stm32_adc.h:
* Distinguish between the normal STM32 ADC IPv2 core and the
modified IPv2 core used in the G4 family, and include either
stm32_adc_v2.h or stm32_adc_v2g4.h as needed.
The following errors are intentionally left.
(Hardware constants like DMA2D_xGPFCCR_CCM.)
arch/arm/src/stm32/stm32_dma2d.c:484:12: error: Mixed case identifier found
arch/arm/src/stm32/stm32_dma2d.c:692:13: error: Mixed case identifier found
arch/arm/src/stm32/stm32_dma2d.c:701:18: error: Mixed case identifier found
arch/arm/src/stm32/stm32_dma2d.c:706:18: error: Mixed case identifier found
arch/arm/src/stm32/stm32_dma2d.c:711:18: error: Mixed case identifier found
arch/arm/src/stm32/stm32_dma2d.c:725:14: error: Mixed case identifier found
arch/arm/src/stm32/stm32_dma2d.c:732:18: error: Mixed case identifier found
The following nxstyle errors are intentionally left.
They are "Lx" constants shared among multiple files.
arch/arm/src/stm32/stm32_ltdc.c:1774:10: error: Mixed case identifier found
arch/arm/src/stm32/stm32_ltdc.c:1775:10: error: Mixed case identifier found
arch/arm/src/stm32/stm32_ltdc.c:1779:11: error: Mixed case identifier found
arch/arm/src/stm32/stm32_ltdc.c:1780:11: error: Mixed case identifier found
arch/arm/src/stm32/stm32_ltdc.c:1784:11: error: Mixed case identifier found
arch/arm/src/stm32/stm32_ltdc.c:1785:11: error: Mixed case identifier found
arch/arm/src/stm32/stm32_ltdc.c:1804:10: error: Mixed case identifier found
arch/arm/src/stm32/stm32_ltdc.c:1805:10: error: Mixed case identifier found
arch/arm/src/stm32/stm32_ltdc.c:1806:10: error: Mixed case identifier found
arch/arm/src/stm32/stm32_ltdc.c:1845:16: error: Mixed case identifier found
arch/arm/src/stm32/stm32_ltdc.c:1849:17: error: Mixed case identifier found
arch/arm/src/stm32/stm32_ltdc.c:1903:11: error: Mixed case identifier found
arch/arm/src/stm32/stm32_ltdc.c:1903:34: error: Mixed case identifier found
arch/arm/src/stm32/stm32_ltdc.c:1907:12: error: Mixed case identifier found
arch/arm/src/stm32/stm32_ltdc.c:1907:35: error: Mixed case identifier found
arch/arm/src/stm32/stm32_ltdc.c:1987:16: error: Mixed case identifier found
arch/arm/src/stm32/stm32_ltdc.c:1991:17: error: Mixed case identifier found
arch/arm/src/stm32/stm32_ltdc.c:2027:16: error: Mixed case identifier found
arch/arm/src/stm32/stm32_ltdc.c:2031:17: error: Mixed case identifier found
arch/arm/src/stm32/stm32_oneshot.c:
arch/arm/src/stm32/stm32_oneshot.h:
arch/arm/src/stm32/stm32_oneshot_lowerhalf.c:
arch/arm/src/stm32/stm32_dbgmcu.h:
* Fix nxstyle errors.
arch/arm/src/stm32/stm32_lsi.c:
* Fix nxstyle errors.
* Also a minor grammar fix in a comment: add "in" to "setting the
LSION bit in the RCC CSR register."
stm32f7, stm32h7, stm32l4 and stm32f0l0g0 do it this way and there is no
reason for classic stm32 to differ. Also manipulation of priv->ie was not
atomic with respect to interrupts.
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
arch/arm/src/stm32/hardware/stm32_dmamux.h,
arch/arm/src/stm32/hardware/stm32g47xxx_dmamux.h:
* New files, based on STM32G474RE reference manual, RM0440 Rev 4.
arch/arm/src/stm32/hardware/stm32_spi.h:
* Avoid numerous ifdef on STM32 part numbers and make the
different variations of SPI peripheral features more
self-documenting: based on STM32_HAVE_IP_SPI_V* defines
from chip.h, define some or all of HAVE_SPI_I2S,
HAVE_SPI_TI_MODE, HAVE_SPI_ARB_DATA_SIZE, HAVE_SPI_FIFOS,
HAVE_SPI_NSSP, HAVE_SPI_I2S_ASTRT, and make decisions on
which registers and bitfields to define based on them.
* Define registers and bitfields for STM32_HAVE_IP_SPI_V4,
currently used only for STM32G47XX family MCUs, including
SPI_CR1_CRCL, SPI_CR2_NSSP, SPI_CR2_FRXTH, SPI_CR2_LDMARX,
SPI_CR2_LDMATX, SPI_CR2_DS_SHIFT/SPI_CR2_DS_MASK,
SPI_SR_FRLVL_SHIFT/SPI_SR_FRLVL_MASK, and
SPI_I2SCFGR_ASTRTEN.
* SPI_I2SCFGR_I2SSTD_PHILLIPS: Was defined incorrectly as
(xx << SPI_I2SCFGR_I2SSTD_SHIFT). Corrected this to
(0 << SPI_I2SCFGR_I2SSTD_SHIFT).
* SPI_I2SCFGR_I2SSTD_MSB: Was defined incorrectly as
(0 << SPI_I2SCFGR_I2SSTD_SHIFT). Corrected this to
(1 << SPI_I2SCFGR_I2SSTD_SHIFT).
* Fix nxstyle errors.
arch/arm/include/stm32/chip.h:
* Add new section "Peripheral IP versions" and specify version of
SPI IP block for STM32F10XX, STM32F20XX, STM32F30XX, STM32F33XX,
STM32F37XX, STM32F4XXX, STM32G47XX, and STM32L15XX.
When HAVE_HSI_CONTROL, adc_reset_hsi_disable() calls adc_reset()
followed by adc_shutdown() and this combination is called before
adc_setup() by upper level ADC driver. Without this patch,
priv->initialized wraps from 0 to 255 in this case.
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
cfsetispeed() now stores baud rate to c_cflag member of
struct termios, so it must not be overridden later on.
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
and remove the special handling in the stack dump
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ia1ef9a427bd4c7f6cee9838d0445f29cfaca3998
arch/arm/src/stm32/stm32_lowputc.c:
* stm32_lowsetup(): Ensure the USART is disabled before attempting
to configure it because some register bits cannot be modified
otherwise. This solves an issue that was encountered when a
serial bootloader did not perform a full teardown/cleanup before
launching NuttX.
Comments only. No functional changes. See STM32G474 Reference Manual
(RM0440 Rev 4), section 3.4.1, Table 11, "Option byte organization."
arch/arm/src/stm32/hardware/stm32g47xxx_memorymap.h:
* STM32_OPTION_BASE: The comment incorrectly said the range was
0x1fff7800-0x1fff780f for a total of 16 Option Bytes. Corrected
this to 0x1fff7800-0x1fff782f, as the device has 48 Option Bytes
for this option block.
* STM32_OPTION_BASE2: The comment incorrectly said the range was
0x1ffff800-0x1ffff80f for a total of 16 Option Bytes. Corrected
this to 0x1ffff800-0x1ffff82f, as the device has 48 Option Bytes
for this option block.
to save the preserved space(1KB) and also avoid the heap overhead
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I694073f68e1bd63960cedeea1ddec441437be025
malloc() and free() should never be used within the OS. This will work in the FLAT build because there is only a single heap, but will cause problems in PROTECTED and KERNEL build modes where there are separate heaps for user and kernel memory.
Typically kmm_malloc(), kmm_zalloc(), and kmm_free() should be called within the kernel in those build modes to use the kernel heap.
Memory is never free. Possible memory leak:
./boards/arm/cxd56xx/common/src/cxd56_crashdump.c: pdump = malloc(sizeof(fullcontext_t));
Memory allocated with malloc(), but freed with kmm_free():
./drivers/usbhost/usbhost_composite.c: cfgbuffer = (FAR uint8_t *)malloc(CUSTOM_CONFIG_BUFSIZE);
Memory is never freed in these cases. It is allocated in the driver initialization logic, but there is no corresponding uninitialization logic; memory is not freed on error conditions:
./arch/arm/src/lc823450/lc823450_i2s.c: priv = (struct lc823450_i2s_s *)zalloc(sizeof(struct lc823450_i2s_s));
./arch/arm/src/sam34/sam_spi.c: spics = (struct sam_spics_s *)zalloc(sizeof(struct sam_spics_s));
./arch/arm/src/sama5/sam_spi.c: spics = (struct sam_spics_s *)zalloc(sizeof(struct sam_spics_s));
./arch/arm/src/samv7/sam_spi.c: spics = (struct sam_spics_s *)zalloc(sizeof(struct sam_spics_s));
Memory is allocated with zalloc() but freed on error conditions with kmm_free():
./arch/arm/src/sama5/sam_ssc.c: priv = (struct sam_ssc_s *)zalloc(sizeof(struct sam_ssc_s));
./arch/arm/src/samv7/sam_ssc.c: priv = (struct sam_ssc_s *)zalloc(sizeof(struct sam_ssc_s));
./arch/arm/src/stm32/stm32_i2s.c: priv = (struct stm32_i2s_s *)zalloc(sizeof(struct stm32_i2s_s));
Memory is never freed:
./drivers/spi/spi_bitbang.c: priv = (FAR struct spi_bitbang_s *)zalloc(sizeof(struct spi_bitbang_s));
stm32_i2sdev_initialize to stm32_i2sbus_initiliaze, to be consistent
with the way other buses are initialized.
The stm32_i2sdev_initiliaze (similar to stm32_spidev_initialize for
example) is a board specific function that does any necessary
initialization that's board depedent.
Add support for the STM32G474 family of microcontrollers and the
B-G474E-DPOW1 Discovery Board, which features a STM32G474RET6.
This is a major pull request as it adds support for an entirely
new family of STM32. This support is implemented in
arch/arm/src/stm32 and shares implementation with other STM32
families supported by that code, such as the 'L15xx, 'F10xx,
'F20xx, 'F3xxx, and 'F4xxx.
arch/arm/Kconfig:
arch/arm/include/stm32/chip.h:
arch/arm/include/stm32/irq.h:
arch/arm/src/stm32/Kconfig:
arch/arm/src/stm32/hardware/stm32_adc.h:
arch/arm/src/stm32/hardware/stm32_adc_v2.h:
arch/arm/src/stm32/hardware/stm32_dma.h:
arch/arm/src/stm32/hardware/stm32_dma_v1.h:
arch/arm/src/stm32/hardware/stm32_flash.h:
arch/arm/src/stm32/hardware/stm32_i2c.h:
arch/arm/src/stm32/hardware/stm32_i2c_v2.h:
arch/arm/src/stm32/hardware/stm32_memorymap.h:
arch/arm/src/stm32/hardware/stm32_pinmap.h:
arch/arm/src/stm32/hardware/stm32_tim.h:
arch/arm/src/stm32/stm32_allocateheap.c:
arch/arm/src/stm32/stm32_dma.c:
arch/arm/src/stm32/stm32_dma_v1.c:
arch/arm/src/stm32/stm32_dumpgpio.c:
arch/arm/src/stm32/stm32_gpio.c:
arch/arm/src/stm32/stm32_gpio.h:
arch/arm/src/stm32/stm32_lowputc.c:
arch/arm/src/stm32/stm32_rcc.c:
arch/arm/src/stm32/stm32_rcc.h:
arch/arm/src/stm32/stm32_serial.c:
arch/arm/src/stm32/stm32_syscfg.h:
arch/arm/src/stm32/stm32_uart.h:
* Add architectural support to existing NuttX files. This
makes the STM32G474 family parts accessible to the system.
With big thanks for detailed code review:
David Sidrane (davids5)
Mateusz Szafoni (raiden00)
Abdelatif Guettouche (Ouss4)
Add support for the STM32G474 family of microcontrollers and the
B-G474E-DPOW1 Discovery Board, which features a STM32G474RET6.
This is a major pull request as it adds support for an entirely
new family of STM32. This support is implemented in
arch/arm/src/stm32 and shares implementation with other STM32
families supported by that code, such as the 'L15xx, 'F10xx,
'F20xx, 'F3xxx, and 'F4xxx.
arch/arm/include/stm32/stm32g47xxx_irq.h:
arch/arm/src/stm32/hardware/stm32g474cxx_pinmap.h:
arch/arm/src/stm32/hardware/stm32g474mxx_pinmap.h:
arch/arm/src/stm32/hardware/stm32g474qxx_pinmap.h:
arch/arm/src/stm32/hardware/stm32g474rxx_pinmap.h:
arch/arm/src/stm32/hardware/stm32g474vxx_pinmap.h:
arch/arm/src/stm32/hardware/stm32g47xxx_gpio.h:
arch/arm/src/stm32/hardware/stm32g47xxx_memorymap.h:
arch/arm/src/stm32/hardware/stm32g47xxx_pinmap.h:
arch/arm/src/stm32/hardware/stm32g47xxx_pwr.h:
arch/arm/src/stm32/hardware/stm32g47xxx_rcc.h:
arch/arm/src/stm32/hardware/stm32g47xxx_syscfg.h:
arch/arm/src/stm32/hardware/stm32g47xxx_uart.h:
arch/arm/src/stm32/stm32g47xxx_rcc.c:
* New files required for architectural support. Note that
existing NuttX files are not modified. As such, in this
revision, the system is unaffected by their addition.
With big thanks for detailed code review:
David Sidrane (davids5)
Mateusz Szafoni (raiden00)
Abdelatif Guettouche (Ouss4)
