Gregory Nutt
|
927b1dcc1f
|
Initialize the telnet factory as part of the common architecture intialization
|
2015-12-07 11:40:29 -06:00 |
|
Gregory Nutt
|
8df99623aa
|
SAMV7: For to add RSWDT driver before committing
|
2015-12-06 16:41:10 -06:00 |
|
Gregory Nutt
|
6a9876f960
|
SAMV7: Add an untested RSWDT driver
|
2015-12-06 09:56:45 -06:00 |
|
Gregory Nutt
|
8f55ec5c69
|
SAMV7: Port the WDT driver from the SAMA5 to the SAMV7
|
2015-12-06 09:29:51 -06:00 |
|
Gregory Nutt
|
347bb86045
|
SAMV7: Port SAMAD5 TRNG driver to the SAMV7
|
2015-12-06 08:53:31 -06:00 |
|
Gregory Nutt
|
52601d9da8
|
SAMV7: Add support for PCK6 as a timer/counter clock source
|
2015-12-04 10:49:20 -06:00 |
|
Gregory Nutt
|
9d769f6056
|
SAMV7: Extend programmable clock support for queries about the PCK configuration
|
2015-12-03 14:11:39 -06:00 |
|
Gregory Nutt
|
8c4302f75d
|
Bring programmable clock logic from SAMA5 to SAMV7
|
2015-12-03 10:22:11 -06:00 |
|
Gregory Nutt
|
1399e00166
|
SAMV7: Fix some issues with lost timer/counter interrupts
|
2015-12-02 18:09:23 -06:00 |
|
Gregory Nutt
|
2300273a07
|
SAMV7 TC: Some trivial improvements
|
2015-12-02 15:53:51 -06:00 |
|
Gregory Nutt
|
9a54702d99
|
SAMV7: Revise timer driver. SAMA5 has one pid/interrupt per timer/counter; SAMV7 has a pid/interrupt per channel
|
2015-12-02 14:09:34 -06:00 |
|
Gregory Nutt
|
192772b7ee
|
SAMV7: Add support for CONFIG_SCHED_TICKLESS_LIMIT_MAX_SLEEP
|
2015-12-02 09:21:34 -06:00 |
|
Gregory Nutt
|
3ce3dbc6ed
|
SAMV7: Ported tickless logic from the SAMA5/SAM4CM to the SAMV7
|
2015-12-02 08:26:33 -06:00 |
|
Gregory Nutt
|
02c57c22f8
|
SAMA5: Misc clean from review while porting some logic to the SAMV7
|
2015-12-02 08:25:23 -06:00 |
|
Gregory Nutt
|
bda05b312e
|
SAMV7: Port the SAMA5 timer/counter driver to the SAMV7
|
2015-12-02 07:18:25 -06:00 |
|
Gregory Nutt
|
975ea3e677
|
SAMA5: Fix a typo in timer/counter setup
|
2015-12-02 07:17:17 -06:00 |
|
Gregory Nutt
|
6734c91a05
|
SAMV7 USB: Add some warnings to avoid certain bad configuration selections
|
2015-12-02 05:30:10 -06:00 |
|
Gregory Nutt
|
754aace61b
|
STM32: CCM procfs more typos
|
2015-12-01 16:28:14 -06:00 |
|
Gregory Nutt
|
bc74aa322b
|
STM32: Fix a couple of typos in STM32 CCM procfs
|
2015-12-01 16:20:51 -06:00 |
|
Gregory Nutt
|
1f82dda9d8
|
Clean up some naming
|
2015-12-01 15:04:12 -06:00 |
|
Gregory Nutt
|
548ba1640f
|
STM32: CCM procfs is no longer a part of the 'base' procfs entries and can now only be supported via run time registration with CONFIG_FS_PROCFS_REGISTER=y
|
2015-12-01 14:55:05 -06:00 |
|
Gregory Nutt
|
7037f13c2d
|
Trivial cosmetic change from review
|
2015-11-30 18:01:26 -06:00 |
|
Wail Khemir
|
fd8db7ad38
|
Change prescaler dynamically to support bigger periods on 16 bits timers
|
2015-11-30 18:52:05 -05:00 |
|
Gregory Nutt
|
5367c5993c
|
SAMV7: Add some conditional logic to handle the case where the board has no 32.768KHz crystal installed
|
2015-11-30 15:21:25 -06:00 |
|
Gregory Nutt
|
4d2299896e
|
SAMV7: Add support to network device statistics to the Ethernet driver
|
2015-11-27 12:30:15 -06:00 |
|
Gregory Nutt
|
8ce454a584
|
Remove some warnings; eliminate unused variables
|
2015-11-26 12:46:53 -06:00 |
|
Gregory Nutt
|
e5e631e57f
|
include/nuttx/net/netdev.h and several Ethernet drivers in arch/: Most network drivers to not support statistics. Those that do only support them when DEBUG is enabled. Each driver collects an architecture specific set of statistics and there is no mechanism in place to view those statistics. Thus, the driver feature was mostly useless. This change standardizes the driver statistics and puts the definition in the common network device structure defined in netdev.h where they can be accessed by network applications. All Ethernet drivers that collect statistics have been adapted to use these common statistics.
|
2015-11-26 12:07:18 -06:00 |
|
Gregory Nutt
|
2afd4595e4
|
Re-think how __KERNEL__ option is set in architecture Makefiles. Should be passed in EXTRADEFINES
|
2015-11-26 06:59:35 -06:00 |
|
Gregory Nutt
|
4aa3dcb51a
|
__KERNEL__ should be defined when compiler architecture specific logic
|
2015-11-25 18:05:36 -06:00 |
|
Gregory Nutt
|
14d7ede265
|
All instances of up_initialize() should call loop_register() is CONFIG_DEV_LOOP=y
|
2015-11-25 17:10:41 -06:00 |
|
Gregory Nutt
|
b1e17d8892
|
Fix some conditional compilation. CONFIG_LIBC_LOCALTIME should be checked in most of the same places wehre CONFIG_TIME_EXTENDED is checked
|
2015-11-25 12:51:07 -06:00 |
|
Gregory Nutt
|
30834721df
|
Trivial changes for compliance with coding standard
|
2015-11-20 17:53:03 -06:00 |
|
Wail Khemir
|
702368fce4
|
Small bug fix for stm32 lower half timer driver
|
2015-11-20 18:16:39 -05:00 |
|
Gregory Nutt
|
25a2e17347
|
Rename up_rtcinitialize to up_rtc_initialize so that it looks like other RTC interfaces
|
2015-11-20 08:27:04 -06:00 |
|
Gregory Nutt
|
25e54726a3
|
STM32: Fix a build error detected by tools/testbuil.sh: The STM32L does not define UID address
|
2015-11-18 14:33:27 -06:00 |
|
Gregory Nutt
|
a6d6c430d9
|
Changes to last merge from review for compliance to coding standards
|
2015-11-17 21:10:17 -06:00 |
|
Marwan Ragab
|
4999c14085
|
Added implementation to get 96-bit stm32 unique id
|
2015-11-17 21:34:41 -05:00 |
|
Gregory Nutt
|
a8ab72f97a
|
Fix some stylistic issues found by tools/nxstyle
|
2015-11-17 17:31:38 -06:00 |
|
Gregory Nutt
|
3c84aa3b5f
|
(Hopefully) cosmetic changes from review of recent merges for conformance to coding standard
|
2015-11-17 16:53:21 -06:00 |
|
Wail Khemir
|
9451b09d3a
|
Added a lower-half timer driver for stm32 which is compatible with the upper-half driver located at /drivers/timers/timer.c
|
2015-11-17 16:57:02 -05:00 |
|
Gregory Nutt
|
88ebcc895b
|
Fix some spacing problems found by tools/nxstyle.c
|
2015-11-15 10:47:42 -06:00 |
|
Gregory Nutt
|
bd384d93eb
|
SAMV7 MCAN: Cosmetic change
|
2015-11-15 08:38:27 -06:00 |
|
Gregory Nutt
|
82b6c8aed7
|
Add SAME70 to arm/arch/src/samv7/Kconfig
|
2015-11-14 13:35:24 -06:00 |
|
Gregory Nutt
|
39362feee0
|
arch/arm/src/samv7: Add pin configuratinos for SAME70. Not all verified. I assume that the SAME70 pin mapping is identical to the SAMV71 minus MediaLB pins
|
2015-11-14 12:14:27 -06:00 |
|
Gregory Nutt
|
58615a4e69
|
arch/arm/src/samv7: Add SAME70 memory map
|
2015-11-14 12:01:28 -06:00 |
|
Gregory Nutt
|
38a3d24706
|
arch/arm/src/samv7: Add support for SAME70 peripheral clocks
|
2015-11-14 11:41:53 -06:00 |
|
Gregory Nutt
|
0add2b8910
|
arch/arm/include/samv7: Add support for the SAME70 family
|
2015-11-14 11:36:21 -06:00 |
|
Gregory Nutt
|
ba57b5bdc0
|
SAMV7 FLASH: Fix a cache error, fix an address comparison
|
2015-11-13 11:32:06 -06:00 |
|
Gregory Nutt
|
a1e9a07c7a
|
SAMV7 progmem: Debug fixes from intial testing
|
2015-11-13 09:18:26 -06:00 |
|
Gregory Nutt
|
4ecf9b5bec
|
SAMV7 FLASH driver now at least compiles
|
2015-11-12 12:26:53 -06:00 |
|