when usrsock client try to connect usrsock server local_loop
socket with an invalid port, server cannot find a listener conn
to handle this connet request, then it will response a TCP_RESET
packet via nuttx existing processing, when before conn recv this
RESET packet, it will trigger usrsock_rpmsg_server poll return
and send REMOTE_CLOSE event to usrsock client.
so usrsock connect_event fucntion need handle this event.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Support ICMP ECHO REQUEST & REPLY. Id of ICMP is processed like port of TCP in NAT. However, our ICMP stack doesn't have a method to manage id allocation like tcp_selectport(), the id is set by apps (like icmp_ping.c) without conflict avoidance, so not adding such conflict avoidance logic to ICMP stack when implementing NAT.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Add basic functions for NAT (NAPT), remaining some logic unimplemented (UDP, ICMP, port assignment, etc). NAT for TCP can work now (unless port conflicts).
Outbound: LAN -> Forward -> NAT(only if targeting at WAN) -> WAN
Inbound: WAN -> NAT(only from WAN, change dest) -> Forward -> LAN
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
In the past, header file paths were generated by the incdir command
Now they are generated by concatenating environment variables
In this way, when executing makefile, no shell command will be executed,
it will improve the speed of executing makfile
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
net_chksum_adjust is used for fast checksum adjustment after modifying some fields in a network packet. Will be used in NAT.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
devif/ipv6_input.c: In function 'ipv6_input':
devif/ipv6_input.c:59:33: error: 'TCPIPv6BUF' undeclared (first use in this function); did you mean 'IPv6BUF'?
59 | #define PAYLOAD ((FAR uint8_t *)TCPIPv6BUF)
| ^~~~~~~~~~
devif/ipv6_input.c:302:14: note: in expansion of macro 'PAYLOAD'
302 | payload = PAYLOAD; /* Assume payload starts right after IPv6 header */
|
Signed-off-by: chao an <anchao@xiaomi.com>
Error: route/net_del_ramroute.c:94:9: error: format specifies type 'unsigned long' but the argument has type 'unsigned int' [-Werror,-Wformat]
HTONL(match->target), HTONL(match->netmask));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/github/workspace/sources/nuttx/include/debug.h:232:23: note: expanded from macro 'ninfo'
^
/github/workspace/sources/nuttx/include/debug.h:102:43: note: expanded from macro '_none'
do { if (0) syslog(LOG_ERR, format, ##__VA_ARGS__); } while (0)
~~~~~~ ^~~~~~~~~~~
/github/workspace/sources/nuttx/include/netinet/in.h:233:17: note: expanded from macro 'HTONL'
^
/github/workspace/sources/nuttx/include/endian.h:63:25: note: expanded from macro '__swap_uint32'
^
Error: route/net_del_ramroute.c:94:31: error: format specifies type 'unsigned long' but the argument has type 'unsigned int' [-Werror,-Wformat]
HTONL(match->target), HTONL(match->netmask));
~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
/github/workspace/sources/nuttx/include/debug.h:232:23: note: expanded from macro 'ninfo'
^
/github/workspace/sources/nuttx/include/debug.h:102:43: note: expanded from macro '_none'
do { if (0) syslog(LOG_ERR, format, ##__VA_ARGS__); } while (0)
~~~~~~ ^~~~~~~~~~~
/github/workspace/sources/nuttx/include/netinet/in.h:233:17: note: expanded from macro 'HTONL'
^
/github/workspace/sources/nuttx/include/endian.h:63:25: note: expanded from macro '__swap_uint32'
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
cunittest error case: protocol invalid need return 123(EPROTONOSUPPORT)
now return 106(EAFNOSUPPORT)
inet_setup will check type ande protocol
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Fixed by commit:
| net: remove pvconn reference from all devif callback
|
| Do not use 'pvconn' argument to get the connection pointer since
| pvconn is normally NULL for some events like NETDEV_DOWN.
| Instead, the connection pointer can be reliably obtained from the
| corresponding private pointer.
Signed-off-by: chao an <anchao@xiaomi.com>
1.Add cellular link layer enum definition and register flow
2.Add ioctl flow to set cellular NICs parameters
Signed-off-by: luojun1 <luojun1@xiaomi.com>
Signed-off-by: chao an <anchao@xiaomi.com>
Issue description:
usrsock will wait for state.recvsem forever because no event triggers
state.recvsem post operation when connect operation in server side is
non-blocking.
Solution:
trigger state.recvsem post operation after receive USRSOCK_EVENT_SENDTO_READY.
Signed-off-by: liangchaozhong <liangchaozhong@xiaomi.com>
igmp/igmp_input.c: In function 'igmp_input':
igmp/igmp_input.c:201:31: warning: the comparison will always evaluate as 'false' for the address of 'grpaddr' will never be NULL [-Waddress]
201 | if (igmp->grpaddr == 0)
| ^~
In file included from nuttx/include/nuttx/net/netstats.h:67,
from igmp/igmp_input.c:53:
nuttx/include/nuttx/net/igmp.h:132:12: note: 'grpaddr' declared here
132 | uint16_t grpaddr[2]; /* 32-bit Group address */
| ^~~~~~~
Signed-off-by: chao an <anchao@xiaomi.com>
fix build warning on GCC 12.2.0
In file included from local/local_fifo.c:25:
In function 'local_hd_name',
inlined from 'local_open_receiver' at local/local_fifo.c:593:3:
local/local_fifo.c:128:12: warning: '%s' directive output may be truncated writing up to 107 bytes into a region of size 97 [-Wformat-truncation=]
128 | CONFIG_NET_LOCAL_VFS_PATH "/%s" LOCAL_HD_SUFFIX, inpath);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
local/local_fifo.c: In function 'local_open_receiver':
local/local_fifo.c:128:40: note: format string is defined here
128 | CONFIG_NET_LOCAL_VFS_PATH "/%s" LOCAL_HD_SUFFIX, inpath);
| ^~
In function 'local_hd_name',
inlined from 'local_open_receiver' at local/local_fifo.c:593:3:
local/local_fifo.c:127:3: note: 'snprintf' output between 15 and 122 bytes into a destination of size 109
127 | snprintf(outpath, LOCAL_FULLPATH_LEN - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
128 | CONFIG_NET_LOCAL_VFS_PATH "/%s" LOCAL_HD_SUFFIX, inpath);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: chao an <anchao@xiaomi.com>
f_domain is used to determine protocol family when CONFIG_NET_IPv4 and CONFIG_NET_IPv6 are both defined, but not correctly used in ipv4_dev_forward because of typo (there's not a config named CONFIG_NET_IPv5) which may cause IPv4 packets to be forwarded as IPv6.
Signed-off-by: wengzhe <wengzhe@xiaomi.com>
NuttShell (NSH) NuttX-10.3.0
ap> ifconfig
=================================================================
Program received signal SIGSEGV, Segmentation fault.
==3920365==ERROR: AddressSanitizer: global-buffer-overflow on address 0x57fb4f2a at pc 0x57177067 bp 0xf1ffebb8 sp 0xf1ffeba8
READ of size 1 at 0x57fb4f2a thread T0
...................
| #10 0xf7ac4339 in __asan::__asan_report_load1 (addr=1476087594) at ../../../../../src/libsanitizer/asan/asan_rtl.cpp:117
| #11 0x57177067 in strncmp (cs=0x57fb4f2a "", ct=0x582d36e0 "stat", nb=4) at string/lib_strncmp.c:40
| #12 0x57f3b467 in netprocfs_opendir (relpath=0x57fb4f26 "net", dir=0xf1ffed80) at procfs/net_procfs.c:398
| #13 0x572b3ae1 in procfs_opendir (mountpt=0xf4602c20, relpath=0x57fb4f26 "net", dir=0xf1ffed80) at procfs/fs_procfs.c:625
| #14 0x572879ff in open_mountpoint (inode=0xf4602c20, relpath=0x57fb4f26 "net", dir=0xf1ffed80) at vfs/fs_dir.c:127
...................
Signed-off-by: chao an <anchao@xiaomi.com>
I noticed that the conn instance will leak during stress test,
The close work queued from tcp_close_eventhandler() will be canceled
by tcp_timer() immediately:
Breakpoint 1, tcp_close_eventhandler (dev=0x565cd338 <up_irq_restore+108>, pvpriv=0x5655e6ff <getpid+12>, flags=0) at tcp/tcp_close.c:71
(gdb) bt
| #0 tcp_close_eventhandler (dev=0x565cd338 <up_irq_restore+108>, pvpriv=0x5655e6ff <getpid+12>, flags=0) at tcp/tcp_close.c:71
| #1 0x5658bf1e in devif_conn_event (dev=0x5660bd80 <g_sim_dev>, flags=512, list=0x5660d558 <g_cbprealloc+312>) at devif/devif_callback.c:508
| #2 0x5658a219 in tcp_callback (dev=0x5660bd80 <g_sim_dev>, conn=0x5660c4a0 <g_tcp_connections>, flags=512) at tcp/tcp_callback.c:167
| #3 0x56589253 in tcp_timer (dev=0x5660bd80 <g_sim_dev>, conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_timer.c:378
| #4 0x5658dd47 in tcp_poll (dev=0x5660bd80 <g_sim_dev>, conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_devpoll.c:95
| #5 0x5658b95f in devif_poll_tcp_connections (dev=0x5660bd80 <g_sim_dev>, callback=0x565770f2 <netdriver_txpoll>) at devif/devif_poll.c:601
| #6 0x5658b9ea in devif_poll (dev=0x5660bd80 <g_sim_dev>, callback=0x565770f2 <netdriver_txpoll>) at devif/devif_poll.c:722
| #7 0x56577230 in netdriver_txavail_work (arg=0x5660bd80 <g_sim_dev>) at sim/up_netdriver.c:308
| #8 0x5655999e in work_thread (argc=2, argv=0xf3db5dd0) at wqueue/kwork_thread.c:178
| #9 0x5655983f in nxtask_start () at task/task_start.c:129
(gdb) c
Continuing.
Breakpoint 2, tcp_update_timer (conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_timer.c:178
(gdb) bt
| #0 tcp_update_timer (conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_timer.c:178
| #1 0x5658952a in tcp_timer (dev=0x5660bd80 <g_sim_dev>, conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_timer.c:708
| #2 0x5658dd47 in tcp_poll (dev=0x5660bd80 <g_sim_dev>, conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_devpoll.c:95
| #3 0x5658b95f in devif_poll_tcp_connections (dev=0x5660bd80 <g_sim_dev>, callback=0x565770f2 <netdriver_txpoll>) at devif/devif_poll.c:601
| #4 0x5658b9ea in devif_poll (dev=0x5660bd80 <g_sim_dev>, callback=0x565770f2 <netdriver_txpoll>) at devif/devif_poll.c:722
| #5 0x56577230 in netdriver_txavail_work (arg=0x5660bd80 <g_sim_dev>) at sim/up_netdriver.c:308
| #6 0x5655999e in work_thread (argc=2, argv=0xf3db5dd0) at wqueue/kwork_thread.c:178
| #7 0x5655983f in nxtask_start () at task/task_start.c:129
Since a separate work will add 24 bytes to each conn instance,
but in order to support the feature of asynchronous close(),
I can not find a better way than adding a separate work,
for resource constraints, I recommend the developers to enable
CONFIG_NET_ALLOC_CONNS, which will reduce the ram usage.
Signed-off-by: chao an <anchao@xiaomi.com>
1. separate command catagory of bt/pktradio from wireless ioctl
2. Remove commoand count limit to support vendor command
Signed-off-by: chao an <anchao@xiaomi.com>
* net/netdev/netdev_ioctl.c:
(netdev_ifr_ioctl): The ioctl SIOCGIFHWADDR provides the hardware
address (e.g., Ethernet MAC, etc.) of a network interface. It is
based on Linux. (BSD-based systems don't have this ioctl.) The Linux
implementation sets sa_family to ARPHRD_ETHER for Ethernet and IEEE
802.11 interfaces [1]. NuttX was setting it to NET_SOCK_FAMILY for
these interface types as well as 6LoWPAN and PKTRADIO; this was
incorrect and also the value of NET_SOCK_FAMILY varies based on
Kconfig settings. Correcting this to ARPHRD_ETHER for Ethernet and
IEEE 802.11 and ARPHRD_IEEE802154 for 6LoWPAN and PKTRADIO.
References:
[1] 'man 7 netdevice' on Linux.
* net/netdev/netdev_ioctl.c:
(netdev_ifr_ioctl): The ioctl SIOCSIFHWADDR sets the hardware address
(e.g., Ethernet MAC, etc.) of a network interface. Radio devices may
have different lengths of hardware addresses, such as
NET_6LOWPAN_EADDRSIZE (8), NET_6LOWPAN_SADDRSIZE (2), or
RADIO_MAX_ADDRLEN (8). Also, Kconfig CONFIG_PKTRADIO_ADDRLEN allows
the user to set any arbitrary size. Note that while the sister ioctl
SIOCGIFHWADDR "get hardware address" copies
`dev->d_mac.radio.nv_addrlen` bytes, SIOCSIFHWADDR was copying
NET_6LOWPAN_ADDRSIZE bytes unconditionally. Depending on which radio
is used, this could be incorrect. Fixing it to use
`dev->d_mac.radio.nv_addrlen` for SIOCSIFHWADDR as well. Also adding
DEBUGASSERT to ensure this is within bounds of source and
destination of the copy.
Seperate usrsock device driver with usrsock core function layer
to make it more flexiable to adopt other kind of usrsock interface driver
Signed-off-by: liangchaozhong <liangchaozhong@xiaomi.com>
In file included from route/net_del_ramroute.c:30:
route/net_del_ramroute.c: In function ‘net_match_ipv4’:
route/net_del_ramroute.c:93:9: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘unsigned int’ [-Wformat=]
93 | ninfo(" target=%08lx netmask=%08lx\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
route/net_del_ramroute.c:93:23: note: format string is defined here
93 | ninfo(" target=%08lx netmask=%08lx\n",
| ~~~~^
| |
| long unsigned int
| %08x
mld/mld_timer.c: In function ‘mld_gendog_work’:
mld/mld_timer.c:118:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
118 | ifindex = (int)arg;
| ^
mld/mld_timer.c: In function ‘mld_v1dog_work’:
mld/mld_timer.c:237:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
237 | ifindex = (int)arg;
| ^
Signed-off-by: chao an <anchao@xiaomi.com>
allow usrsock USRSOCK_MESSAGE_RESPONSE_DATA_ACK with no-preload data
so addrlen could be updated to valuelen_nontrunc of usrsock_message_datareq_ack_s
nsh> usrsocktest
...
Testing group "basic_getsockname" =>
[TEST ASSERT FAILED!]
In function "basic_getsockname_open":
line 170: Assertion `(ssize_t)((ret)) == (ssize_t)((0))' failed.
got value: -1
should be: 0
Group "basic_getsockname": [FAILED]
Signed-off-by: chao an <anchao@xiaomi.com>
fix usrsock remote_disconnect fail:
nsh> usrsocktest
...
Testing group "remote_disconnect" =>
[TEST ASSERT FAILED!]
In function "receive":
line 497: Assertion `(ssize_t)((ret)) == (ssize_t)((0))' failed.
got value: -1
should be: 0
Group "remote_disconnect": [FAILED]
...
Reference:
RECV(2)
NAME
recv, recvfrom, recvmsg - receive a message from a socket
...
RETURN VALUE
...
When a stream socket peer has performed an orderly shutdown,
the return value will be 0 (the traditional "end-of-file" return).
Datagram sockets in various domains (e.g., the UNIX and Internet domains)
permit zero-length datagrams. When such a datagram is received, the return value is 0.
Signed-off-by: chao an <anchao@xiaomi.com>
fix usrsock getsockname fail
nsh> usrsocktest
...
Testing group "basic_getsockname" =>
[TEST ASSERT FAILED!]
In function "basic_getsockname_open":
line 170: Assertion `(ssize_t)((ret)) == (ssize_t)((0))' failed.
got value: -1
should be: 0
Group "basic_getsockname": [FAILED]
...
Reference:
GETSOCKNAME(2)
NAME
getsockname - get socket name
...
DESCRIPTION
...
The returned address is truncated if the buffer provided is too small;
in this case, addrlen will return a value greater than was supplied to the call.
Signed-off-by: chao an <anchao@xiaomi.com>
follow the below change:
-----------------------------------------------
commit 0334819742
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Mon Aug 22 05:10:47 2022 +0800
net/usrsock: Change xid from uint64_t to uint32_t
by generating the new xid for each transaction
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Signed-off-by: chao an <anchao@xiaomi.com>
Do not use 'pvconn' argument to get the connection pointer since
pvconn is normally NULL for some events like NETDEV_DOWN.
Instead, the connection pointer can be reliably obtained from the
corresponding private pointer.
Signed-off-by: chao.an <anchao@xiaomi.com>
rename the UDP_BINDTODEVICE to SO_BINDTODEVICE to follow the linux
style to be compatible with non-UDP protocol binding requirements
Signed-off-by: chao.an <anchao@xiaomi.com>
Otherwise, when a long test triggers multiple timeout retransmissions,
the late timeout retransmissions are always delayed between 24 and 48 seconds
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
since it is impossible to track producer and consumer
correctly if TCP/IP stack pass IOB directly to netdev
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
server:
at accept last nxsem_post(&client->lc_waitsem);
client:
connect wait(&client->lc_waitsem) then local_open_client_rx();
But if the server priority is higher then client,
and after server accept return, immediately call send().
At this time the client has no way do local_open_client_rx().
Then server send() return error.
Fix:
add lc_done sem to client
Signed-off-by: ligd <liguiding1@xiaomi.com>
bc_rxtail/rxtail should always point to newly frame.
If input more than one frame before receive,
missing assignment can result in old frame lost.
Signed-off-by: larry <larry@transtekcorp.com>
fix regression of invalid update the rexmit_seq in buffer mode
rexmit_seq should not be used instead of sndseq in fast retransmission,
sndseq of retransmission in the packet does not need to be re-updated
Signed-off-by: chao.an <anchao@xiaomi.com>
Net poll teardown is not protected by net lock, if the conn is released
before teardown, the assertion failure will be triggered during free dev
callback, this patch will add the net lock around net poll teardown to
fix race condition
nuttx/libs/libc/assert/lib_assert.c:36
nuttx/net/devif/devif_callback.c:85
nuttx/net/tcp/tcp_netpoll.c:405
nuttx/fs/vfs/fs_poll.c:244
nuttx/fs/vfs/fs_poll.c:500
Signed-off-by: chao.an <anchao@xiaomi.com>
When the free connection list is unenough to alloc a new instance,
the TCP stack will reuse the currently closed connection, but if
the handle is not released by the user via close(2), the reference
count of the connection remains in a non-zero value, it will cause
the assertion to fail, so when the handle is not released we should
not use such a conn instance when being actively closed, and ensure
that the reference count is assigned within the net lock protection
|(gdb) bt
|#0 up_assert (filename=0x565c78f7 "tcp/tcp_conn.c", lineno=771) at sim/up_assert.c:75
|#1 0x56566177 in _assert (filename=0x565c78f7 "tcp/tcp_conn.c", linenum=771) at assert/lib_assert.c:36
|#2 0x5657d620 in tcp_free (conn=0x565fb3e0 <g_tcp_connections>) at tcp/tcp_conn.c:771
|#3 0x5657d5a1 in tcp_alloc (domain=2 '\002') at tcp/tcp_conn.c:700
|#4 0x565b1f50 in inet_tcp_alloc (psock=0xf3dea150) at inet/inet_sockif.c:144
|#5 0x565b2082 in inet_setup (psock=0xf3dea150, protocol=0) at inet/inet_sockif.c:253
|#6 0x565b1bf0 in psock_socket (domain=2, type=1, protocol=0, psock=0xf3dea150) at socket/socket.c:121
|#7 0x56588f5f in socket (domain=2, type=1, protocol=0) at socket/socket.c:278
|#8 0x565b11c0 in hello_main (argc=1, argv=0xf3dfab10) at hello_main.c:35
|#9 0x56566631 in nxtask_startup (entrypt=0x565b10ef <hello_main>, argc=1, argv=0xf3dfab10) at sched/task_startup.c:70
|#10 0x565597fa in nxtask_start () at task/task_start.c:134
Signed-off-by: chao.an <anchao@xiaomi.com>
This reverts commit b88a1fd7fd. [1]
Because:
* It casues assertion failures like [2].
* I don't understand what it attempted to fix.
[1]
```
commit b88a1fd7fd
Author: chao.an <anchao@xiaomi.com>
Date: Sat Jul 2 13:17:41 2022 +0800
net/tcp: discard connect reference before free
connect reference should be set to 0 before free
Signed-off-by: chao.an <anchao@xiaomi.com>
```
[2]
```
#0 up_assert (filename=0x5516d0 "tcp/tcp_conn.c", lineno=771) at sim/up_assert.c:75
#1 0x000000000040a4bb in _assert (filename=0x5516d0 "tcp/tcp_conn.c", linenum=771) at assert/lib_assert.c:36
#2 0x000000000042a2ad in tcp_free (conn=0x597fe0 <g_tcp_connections+384>) at tcp/tcp_conn.c:771
#3 0x000000000053bdc2 in tcp_close_disconnect (psock=0x7f58d1abbd80) at tcp/tcp_close.c:331
#4 0x000000000053bc69 in tcp_close (psock=0x7f58d1abbd80) at tcp/tcp_close.c:366
#5 0x000000000052eefe in inet_close (psock=0x7f58d1abbd80) at inet/inet_sockif.c:1689
#6 0x000000000052eb9b in psock_close (psock=0x7f58d1abbd80) at socket/net_close.c:102
#7 0x0000000000440495 in sock_file_close (filep=0x7f58d1b35f40) at socket/socket.c:115
#8 0x000000000043b8b6 in file_close (filep=0x7f58d1b35f40) at vfs/fs_close.c:74
#9 0x000000000043ab22 in nx_close (fd=9) at inode/fs_files.c:544
#10 0x000000000043ab7f in close (fd=9) at inode/fs_files.c:578
```
Retransmit only one the earliest not acknowledged segment
(according to RFC 6298 (5.4)). The issue is the same as it was
in tcp_send_unbuffered.c and tcp_sendfile.c.
Signed-off-by: chao.an <anchao@xiaomi.com>
The time consuming of tcp waving hands(close(2)) will be affected
by network jitter, especially the wireless device cannot receive
the last-ack under worst environment, in this change we move the
tcp close callback into background and invoke the resource free
from workqueue, which will avoid the user application from being
blocked for a long time and unable to return in the call of close
Signed-off-by: chao.an <anchao@xiaomi.com>
since devif_timer has been removed in:
commit 035d925864
Author: zhanghongyu <zhanghongyu@xiaomi.com>
Date: Sun May 29 21:47:28 2022 +0800
devif: remove all devif_timer
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
since the code could map the unsupported work to the
supported one and remove select SCHED_WORKQUEUE from
Kconfig since SCHED_[L|H]PWORK already do the selection
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
When a Netlink response is issued, which a task is currently polling for
on the corresponding AF_NETLINK socket, then the poll call will return
with a ENOENT error. This is due to the fact that the Netlink response
notifier is automatically torn down after the notification.
Fixed by making netlink_notifier_teardown a best-effort function that
does not return a result code.
Signed-off-by: Michael Jung <michael.jung@secore.ly>
According to POSIX the length of the source address of the received
message shall be stored in the object pointed to by the address_len
argument.
This patch fixes two places where this did not happen correctly.
Signed-off-by: Michael Jung <michael.jung@secore.ly>
This fixes a regression caused by the following commit,
which prevents the file flag from being updated.
```
commit 28860b5242
Author: chao.an <anchao@xiaomi.com>
Date: Sat Mar 19 14:47:37 2022 +0800
net/netdev: fix switch case missing break
Signed-off-by: chao.an <anchao@xiaomi.com>
```
Note: some applications like mbedtls uses F_GETFL to confirm
the nonblock-ness of the socket. This is critical for such
applications.
==1598322==ERROR: AddressSanitizer: heap-use-after-free on address 0xf514f8a8 at pc 0x58ac3898 bp 0xd0b4d488 sp 0xd0b4d478
READ of size 4 at 0xf514f8a8 thread T0
#0 0x58ac3897 in rpmsg_socket_pollnotify rpmsg/rpmsg_sockif.c:211
#1 0x58ac512f in rpmsg_socket_ept_cb rpmsg/rpmsg_sockif.c:312
#2 0x5787881c in rpmsg_virtio_rx_callback open-amp/lib/rpmsg/rpmsg_virtio.c:331
#3 0x57886a67 in virtqueue_notification open-amp/lib/virtio/virtqueue.c:623
#4 0x5786fb89 in rproc_virtio_notified open-amp/lib/remoteproc/remoteproc_virtio.c:340
#5 0x5786bde3 in remoteproc_get_notification open-amp/lib/remoteproc/remoteproc.c:985
#6 0x57755a50 in rptun_worker rptun/rptun.c:303
#7 0x57755e51 in rptun_thread rptun/rptun.c:352
#8 0x57730d4a in nxtask_start task/task_start.c:128
#9 0xdeadbeee (/memfd:pulseaudio (deleted)+0x15dbeee)
Signed-off-by: ligd <liguiding1@xiaomi.com>
reference:
https: //man7.org/linux/man-pages/man2/accept.2.html
1. default set block mode if accept() a new socket
2. local_socket support FIONBIO
Signed-off-by: ligd <liguiding1@xiaomi.com>
Fix this compile-time warning:
rpmsg/rpmsg_sockif.c:381:24: warning: format '%d' expects argument of type 'int', but argument 3 has type 'ssize_t' {aka 'long int'} [-Wformat=]
381 | nerr("circbuf_write overflow, %d, %d\n", written, len);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~
| |
| ssize_t {aka long int}
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
newsock = accept(server, &addr, &addrlen);
replace the socket flags from newsock to server to ensure that
the nonblock flags is handled correctly
Signed-off-by: chao.an <anchao@xiaomi.com>
Error: module/mod_insmod.c:203:3: error: 'strncpy' specified bound 16 equals destination size [-Werror=stringop-truncation]
203 | strncpy(modp->modname, modname, MODLIB_NAMEMAX);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
wqueue/kwork_thread.c: In function 'work_start_lowpri':
Error: wqueue/kwork_thread.c:212:22: error: '%lx' directive output may be truncated writing between 1 and 16 bytes into a region of size 14 [-Werror=format-truncation=]
212 | snprintf(args, 16, "0x%" PRIxPTR, (uintptr_t)wqueue);
local/local_sockif.c: In function 'local_getsockname':
Error: local/local_sockif.c:392:11: error: 'strncpy' specified bound depends on the length of the source argument [-Werror=stringop-overflow=]
392 | strncpy(unaddr->sun_path, conn->lc_path, namelen);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
chip/esp32_wifi_utils.c: In function 'esp_wifi_scan_event_parse':
Error: chip/esp32_wifi_utils.c:373:37: error: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to dereference it? [-Werror=sizeof-pointer-memaccess]
memset(ap_list_buffer, 0x0, sizeof(ap_list_buffer));
^
stdio/lib_fputs.c: In function 'fputs':
Error: stdio/lib_fputs.c:99:9: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s == NULL || stream == NULL)
^
Error: stdio/lib_fputs.c:99:27: error: nonnull argument 'stream' compared to NULL [-Werror=nonnull-compare]
if (s == NULL || stream == NULL)
^
stdio/lib_vfprintf.c: In function 'vfprintf':
Error: stdio/lib_vfprintf.c:40:6: error: nonnull argument 'stream' compared to NULL [-Werror=nonnull-compare]
if (stream)
^
string/lib_strdup.c: In function 'strdup':
Error: string/lib_strdup.c:39:6: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s)
^
string/lib_strndup.c: In function 'strndup':
Error: string/lib_strndup.c:56:6: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s)
^
string/lib_strpbrk.c: In function 'strpbrk':
Error: string/lib_strpbrk.c:39:7: error: nonnull argument 'str' compared to NULL [-Werror=nonnull-compare]
if (!str || !charset)
^~~~
Error: string/lib_strpbrk.c:39:15: error: nonnull argument 'charset' compared to NULL [-Werror=nonnull-compare]
if (!str || !charset)
^~~~~~~~
string/lib_strrchr.c: In function 'strrchr':
Error: string/lib_strrchr.c:40:6: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s)
^
Error: time/lib_asctimer.c:73:50: error: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 12 [-Werror=format-truncation=]
snprintf(buf, 26, "%.3s %.3s%3d %.2d:%.2d:%.2d %d\n",
^~
time/lib_asctimer.c:73:21: note: directive argument in the range [-2147481748, 2147483647]
snprintf(buf, 26, "%.3s %.3s%3d %.2d:%.2d:%.2d %d\n",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
time/lib_asctimer.c:73:3: note: 'snprintf' output between 17 and 68 bytes into a destination of size 26
snprintf(buf, 26, "%.3s %.3s%3d %.2d:%.2d:%.2d %d\n",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
g_wday_name[tp->tm_wday], g_mon_name[tp->tm_mon],
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tp->tm_mday, tp->tm_hour, tp->tm_min, tp->tm_sec,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1900 + tp->tm_year);
~~~~~~~~~~~~~~~~~~~
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
socket/setsockopt.c: In function ‘psock_socketlevel_option’:
socket/setsockopt.c:168:38: warning: declaration of ‘conn’ shadows a previous local [-Wshadow]
168 | FAR struct tcp_conn_s *conn;
| ^~~~
Signed-off-by: chao.an <anchao@xiaomi.com>
1. remove the unnecessary interfaces tcp_close_monitor()
socket flags(s_flags) is a global state for net connection
remove the incorrect update for stop monitor
2. do not start the tcp monitor from duplicated psock
the tcp monitor has already registered in connect callback
------------------------------------------------------------
This patch also fix the telnet issue reported by:
https://github.com/apache/incubator-nuttx/pull/5434#issuecomment-1035600651
the orignal session fd is closed after dup, the connect state
has incorrectly migrated to close:
drivers/net/telnet.c:
977 static int telnet_session(FAR struct telnet_session_s *session)
...
1031 ret = psock_dup2(psock, &priv->td_psock);
...
1082 nx_close(session->ts_sd);
Signed-off-by: chao.an <anchao@xiaomi.com>
error:
--------------------------------------
netdev/netdev_lladdrsize.c: In function ‘netdev_lladdrsize’:
netdev/netdev_lladdrsize.c:148:7: error: duplicate case value
148 | case NET_LL_BLUETOOTH:
| ^~~~
netdev/netdev_lladdrsize.c:119:7: note: previously used here
119 | case NET_LL_BLUETOOTH:
| ^~~~
BLUETOOTH_HDRLEN has been removed by:
---------------------------------
|commit aae0d92598
|Author: Gregory Nutt <gnutt@nuttx.org>
|Date: Sun Apr 1 15:21:58 2018 -0600
|
|wireless/bluetooth and net/bluetooth:
|
|Clean up some garbage left in Kconfig file that broke 'make menuconfig'.
|Clean up some craziness with Bluetooth frame length definitions.
Signed-off-by: chao.an <anchao@xiaomi.com>
sixlowpan/sixlowpan_input.c: In function ‘sixlowpan_dispatch’:
sixlowpan/sixlowpan_input.c:629:3: warning: implicit declaration of function ‘pkt_input’;
did you mean ‘ipv6_input’? [-Wimplicit-function-declaration]
629 | pkt_input(&radio->r_dev);
| ^~~~~~~~~
| ipv6_input
Signed-off-by: chao.an <anchao@xiaomi.com>