dongjianli
09c689ea15
net/icmp and icmpv6: Fix failure to poll ICMP socket issue.
2018-08-26 15:37:03 -06:00
Xiang Xiao
40b0e98d25
net/icmp/icmp_conn.c and net/icmpv6/icmpv6_conn.c: Change the type of id in icmpv[6]_findconn to uint16_t
2018-08-26 15:28:02 -06:00
ligd
e840038f2d
net/ and include/nuttx/net: Add getpeername() support
2018-07-19 07:16:30 -06:00
Gregory Nutt
22cd0d47fa
This commit attempts remove some long standard confusion in naming and some actual problems that result from the naming confusion. The basic problem is the standard MTU does not include the size of the Ethernet header. For clarity, I changed the naming of most things called MTU to PKTSIZE. For example, CONFIG_NET_ETH_MTU is now CONFIG_NET_ETH_PKTSIZE.
...
This makes the user interface a little hostile. People thing of an MTU of 1500 bytes, but the corresponding packet is really 1514 bytes (including the 14 byte Ethernet header). A more friendly solution would configure the MTU (as before), but then derive the packet buffer size by adding the MAC header length. Instead, we define the packet buffer size then derive the MTU.
The MTU is not common currency in networking. On the wire, the only real issue is the MSS which is derived from MTU by subtracting the IP header and TCP header sizes (for the case of TCP). Now it is derived for the PKTSIZE by subtracting the IP header, the TCP header, and the MAC header sizes. So we should be all good and without the recurring 14 byte error in MTU's and MSS's.
Squashed commit of the following:
Trivial update to fix some spacing issues.
net/: Rename several macros containing _MTU to _PKTSIZE.
net/: Rename CONFIG_NET_SLIP_MTU to CONFIG_NET_SLIP_PKTSIZE and similarly for CONFIG_NET_TUN_MTU. These are not the MTU which does not include the size of the link layer header. These are the full size of the packet buffer memory (minus any GUARD bytes).
net/: Rename CONFIG_NET_6LOWPAN_MTU to CONFIG_NET_6LOWPAN_PKTSIZE and similarly for CONFIG_NET_TUN_MTU. These are not the MTU which does not include the size of the link layer header. These are the full size of the packet buffer memory (minus any GUARD bytes).
net/: Rename CONFIG_NET_ETH_MTU to CONFIG_NET_ETH_PKTSIZE. This is not the MTU which does not include the size of the link layer header. This is the full size of the packet buffer memory (minus any GUARD bytes).
net/: Rename the file d_mtu in the network driver structure to d_pktsize. That value saved there is not the MTU. The packetsize is the memory large enough to hold the maximum packet PLUS the size of the link layer header. The MTU does not include the link layer header.
2018-07-04 14:10:40 -06:00
Gregory Nutt
1acfac3eb6
net/: More fixes to wrong comments from old change from the interrupt driven network to the work-queue driven network.
2018-06-23 15:03:01 -06:00
Gregory Nutt
aabdc00e8c
net/: Fix some incorrect comments that go back for years (but have also been cloned in newer files). The network was once interrupt driver, but now runs on the work queue with a semaphore to enforce mutual exclusion.
2018-06-23 14:09:06 -06:00
Gregory Nutt
a0e169ad7b
net/: Fix a sixlowpan typo bug recently introduced; Rename g_ipv6_allzeroaddre with the more meaning g_ipv6_unspecaddr since the all-zero address is the IPv6 unspecified address (sometime IN6_ADDR_ANY). Remove more inline tests for IPv6 multicast with tcommint net_is_addr_mcast() macro. Update some comments.
2018-06-23 12:53:27 -06:00
Gregory Nutt
5bb216fb90
net/: There are many different checks for IPv6 multicast addresses. Most of the checks are different. RFC 3513 clearly specifies how to detect an IPv6 multilcast address: they should begin with 0xffxx. I did not change some of the checks in ipv6_input.c, however. In that file, the comments indicate that the code should only pick of certain mulicast address that begin withi 0xff02.
2018-06-23 10:13:38 -06:00
Gregory Nutt
706a6a2c19
Trivial typo fixes
2018-06-23 06:20:25 -06:00
Gregory Nutt
8fdbb1e0a4
Elimate use of the non-standard type systime_t and replace it the equivalent, standard type clock_t
...
Squashed commit of the following:
sched: Rename all use of system_t to clock_t.
syscall: Rename all use of system_t to clock_t.
net: Rename all use of system_t to clock_t.
libs: Rename all use of system_t to clock_t.
fs: Rename all use of system_t to clock_t.
drivers: Rename all use of system_t to clock_t.
arch: Rename all use of system_t to clock_t.
include: Remove definition of systime_t; rename all use of system_t to clock_t.
2018-06-16 12:16:13 -06:00
Gregory Nutt
b54ffe858a
Standardization of some function headers.
2018-03-13 09:52:27 -06:00
SP
52d54b2451
net/icmpv6/icmpv6: Eliminate warnings by correct the type uses to link structure into lists.
2018-02-23 08:04:50 -06:00
Dmitriy Linikov
a8c58607e9
Merged in hardlulz/modem-3.0-nuttx/fix-sem-EINTR (pull request #603 )
...
Added ECANCELED condition to DEBUGASSERT-s checking sem_wait result
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-02-20 18:24:53 +00:00
Gregory Nutt
7cf88d7dbd
Make sure that labeling is used consistently in all function headers.
2018-02-01 10:00:02 -06:00
Gregory Nutt
2a2cdb4df2
net: Fix an error introduced when ICMP and ICMP6 socket support was added in NuttX-7.3. A gratuitous ARP (or solitication) was being sent after receive of the ECHO replay (advertisement).
2018-01-01 11:15:21 -06:00
Gregory Nutt
af65eac4f2
net/icmp and icmpv6: Fix some errors in debug assertions introduced with last changes in this area. Also updates a REAME.txt file
2017-11-22 11:38:17 -06:00
Gregory Nutt
74a633ea94
net/icmpv6: Remove the 'list' field from struct icmpv6_conn_s. It is not used.
2017-11-21 10:25:27 -06:00
Gregory Nutt
4629cf9461
net/icmpv6: Fix an error in the poll logic. It was assume that the input parmeter pvconn was valid. It was not. Instead, the poll logic must work like the sendto() and recvfrom() logic: It must keep a copy of the conn structure in the private data.
2017-11-21 10:22:45 -06:00
Gregory Nutt
bcc61fed26
Update a README and a misnamed formal parameter.
2017-11-21 09:24:25 -06:00
Anthony Merlino
f954345dbe
net/icmpv6: icmpv6_input() needs to set d_len to 0 after consuming echo reply, otherwise, garbage will get sent out.
2017-11-20 12:15:01 -06:00
Gregory Nutt
d741185c91
net/icmpv6/icmpv6_radvertise.c: set the prefix length to preconfigured value
2017-11-08 07:50:36 -06:00
Sakari Kapanen
795e884aea
net/icmpv6/icmpv6_radvertise.c: Add option to manually specify router prefix
2017-11-08 07:47:41 -06:00
Anthony Merlino
02721f9d95
net/icmpv6: Add some header file necessary for correct build.
...
drivers/wireless/ieee80211: Fix typos and spelling errors as needed for Photon build.
2017-11-01 06:58:33 -06:00
Gregory Nutt
6163033439
net/icmpv6: Remove prototype for obsolete, removed function.
2017-10-24 16:57:24 -06:00
Gregory Nutt
70c59a9d91
This commit adds support for semi-standard IPPROTO_ICMP6 sockets. This is a replacement for the non-standard ICMPv6 ping support that violated the portable POSIX OS interface.
...
Squashed commit of the following:
net/icmpv6: IPPROT_ICMP6 socket logic now builds without error.
net/icmpv6: Add support for read-ahead and poll(). Initial commit is just cloned from ICMP with the appropriate name changes.
configs/: All defconfig filess that include CONFIG_NET_ICMPv6_SOCKET=y need to select CONFIG_SYSTEM_PING6=y and deselect CONFIG_DISABLE_POLL.
Update NSH documention to show that ping6 is now a built in command.
net/icmpv6: Add icmpv6_sendto.c and icmpv6_recvfrom.c. Initial versions are just clones from icmp/ with appropriate name changes.
net/icmpv6: Clone some ICMP socket logic as the beginning of support for ICMPv6 socket support.
Rename CONFIG_NET_ICMPv6_PING to CONFIG_NET_ICMPv6_SOCKET. Move prototype for icmpv6_ping from include/nuttx/net/icmpv6 to net/icmpv6/icmpv6.h
2017-10-24 11:23:08 -06:00
Gregory Nutt
42a0796615
Squashed commit of the following:
...
sched/semaphore: Add nxsem_post() which is identical to sem_post() except that it never modifies the errno variable. Changed all references to sem_post in the OS to nxsem_post().
sched/semaphore: Add nxsem_destroy() which is identical to sem_destroy() except that it never modifies the errno variable. Changed all references to sem_destroy() in the OS to nxsem_destroy().
libc/semaphore and sched/semaphore: Add nxsem_getprotocol() and nxsem_setprotocola which are identical to sem_getprotocol() and set_setprotocol() except that they never modifies the errno variable. Changed all references to sem_setprotocol in the OS to nxsem_setprotocol(). sem_getprotocol() was not used in the OS
2017-10-03 15:35:24 -06:00
Gregory Nutt
83cdb0c552
Squashed commit of the following:
...
libc/semaphore: Add nxsem_getvalue() which is identical to sem_getvalue() except that it never modifies the errno variable. Changed all references to sem_getvalue in the OS to nxsem_getvalue().
sched/semaphore: Rename all internal private functions from sem_xyz to nxsem_xyz. The sem_ prefix is (will be) reserved only for the application semaphore interfaces.
libc/semaphore: Add nxsem_init() which is identical to sem_init() except that it never modifies the errno variable. Changed all references to sem_init in the OS to nxsem_init().
sched/semaphore: Rename sem_tickwait() to nxsem_tickwait() so that it is clear this is an internal OS function.
sched/semaphoate: Rename sem_reset() to nxsem_reset() so that it is clear this is an internal OS function.
2017-10-03 12:52:31 -06:00
Sakari Kapanen
d0f72617ef
From b7b1826930c7da10416bceebce5d63dc8e4086ca Mon Sep 17 00:00:00 2001
...
From: Sakari Kapanen <sakari.kapanen@optofidelity.com>
Date: Sun, 24 Sep 2017 13:19:25 +0300
Subject: [PATCH] ICMPv6: fix router advertisement
Fixes several errors preventing icmpv6_radvertise.c from being compiled. Fixes conversions to network byte order (namely vlifetime, plifetime, mtu).
IPv6 source address is set to link-local IP address instead of the address in the netdev structure. This is in compliance to RFC 4861. RA didn't work on Linux before this change.
Finally, router prefix and prefix length are derived from the IPv6 address and netmask in the netdev structure. This seems to make more sense than using a predefined, separate prefix from the config.
2017-09-24 06:33:05 -06:00
Gregory Nutt
0b2a4eb4bd
Networking: A little more wording changes related to interrupts vs. events
2017-08-29 15:08:38 -06:00
Gregory Nutt
04ad162540
Networking: Clean up some naming that has bothered me for a long time... There are no interrupts and no interrupt handlers in the network. There are events and event handler (there used to to be interrupt logic in there years ago but that is long, long gone).
2017-08-29 14:08:04 -06:00
Gregory Nutt
c5e5cd5c0f
net/icmpv6: Eliminate a warning
2017-08-10 07:27:40 -06:00
Gregory Nutt
78e90f0fc8
Fix a couple of problems found in build testing
2017-08-08 16:30:27 -06:00
Gregory Nutt
efbb47999f
Networking: Fix netdev_dev_lladdrsize. In some configurations, it could return the wrong size for the address of a packet radio.
2017-08-08 16:27:23 -06:00
Gregory Nutt
aeb59383cf
Remove CONFIG_NET_MULTILINK. This increases code size by a little, but greatly reduces the complexity of the network code.
2017-08-08 15:26:09 -06:00
Gregory Nutt
bd7c84b23e
Remove CONFIG_NETDEV_MULTINIC. This increases code size by a little, but greatly reduces the complexity of the network code.
2017-08-08 14:24:12 -06:00
Masayuki Ishikawa
bac67455b6
ICMPv6: Support source link-layer address option in RA
2017-08-08 16:42:34 +09:00
Gregory Nutt
2ada7d5892
IPv6: Remove comparisons to the address with all ones set. IPv6 does not support broadcast addresses and certainly not in that form. Replace with multicast addresses beginning with 0xff02.
2017-08-07 11:50:50 -06:00
Gregory Nutt
7f53e08917
Squashed commit of the following:
...
commit 7029dffd02156bcbfa84262671c2ca766a117191
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 29 12:02:13 2017 -0600
6LoWPAN PktRadio: Add missing MetaData-related prototypes and initialization logic. Perform a major renaming to make room in the 6LoWPAN name space for packet radios.
commit e2012f7c1df14155c0bfd45d7f1cb3f71b259f48
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 29 10:16:23 2017 -0600
6LoWPAN PktRadio: Some initial changes to support raw packet radios without IEEE 802.15.4 with 6LoWPAN.
commit c6dbf9178539b7da75e492ffd1d1f93c9c326299
Merge: da782d6cdf 5889ce65f538f79543dc47791442a0b458934ac4f287cc25d6598386ef90c9ff8cbab92fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-29 13:42:26 -06:00
Gregory Nutt
cfe0d253e9
icmpv6_input.c edited online with Bitbucket
2017-07-11 23:59:08 +00:00
Gregory Nutt
e105454937
ICMPv6 w/Autoconfiguration: Fix a compile issue introduced with recent change for 6LoWPAN support.
2017-07-11 14:59:42 -06:00
Gregory Nutt
975473fed8
ICMPv6: Add 6LoWPAN and IP forwarding support.
2017-07-09 11:35:26 -06:00
Gregory Nutt
aa2e9c15a5
IP forwarding: Major rearchitecting of the outgoing portion of the IP forwarding logic necessary into to properly received device-related forwarding events.
2017-07-07 20:19:26 -06:00
Gregory Nutt
803235ad4b
IP forwaring: Rename some files to get closer to other naming conventions.
2017-07-07 18:45:58 -06:00
Gregory Nutt
7258f1cbfc
IP forwarding: Move to separate directory. A few fixes from early testing; In TUN driver, do all polling on worker thread. Otherwise, the stack gets very deep.
2017-07-07 18:33:06 -06:00
Gregory Nutt
b4a0ac53a8
Networking: Improve naming and simplify some logic of previous commit.
2017-07-07 06:51:52 -06:00
Gregory Nutt
70c6b52132
ICMPv6: Fix an address size calculation that was bungled in a recent commit.
2017-07-06 19:37:01 -06:00
Gregory Nutt
b5d7187df6
IP forwarding design simplication; might save some memory. Also fix some compile issues introduce with last commit in MULTINIC configration.
2017-07-06 16:19:10 -06:00
Gregory Nutt
f323f75887
IPv6 Neighbor: Update table format to support IEEE 802.15.4 MAC addresses.
2017-07-06 13:36:59 -06:00
Gregory Nutt
a5f361e984
ICMPv6: Fix so that ICMPv6 can be used with 6LoWPAN.
2017-07-06 12:00:59 -06:00
Gregory Nutt
efdc5b0c29
IP forwarding: Add missing ICMP support.
2017-07-06 07:49:55 -06:00
