chao an
34d2cde8a8
net/l2/l3/l4: add support of iob offload
...
1. Add new config CONFIG_NET_LL_GUARDSIZE to isolation of l2 stack,
which will benefit l3(IP) layer for multi-MAC(l2) implementation,
especially in some NICs such as celluler net driver.
new configuration options: CONFIG_NET_LL_GUARDSIZE
CONFIG_NET_LL_GUARDSIZE will reserved l2 buffer header size of
network buffer to isolate the L2/L3 (MAC/IP) data on network layer,
which will be beneficial to L3 network layer protocol transparent
transmission and forwarding
------------------------------------------------------------
Layout of frist iob entry:
iob_data (aligned by CONFIG_IOB_ALIGNMENT)
|
| io_offset(CONFIG_NET_LL_GUARDSIZE)
| |
-------------------------------------------------
iob | Reserved | io_len |
-------------------------------------------------
-------------------------------------------------------------
Layout of different NICs implementation:
iob_data (aligned by CONFIG_IOB_ALIGNMENT)
|
| io_offset(CONFIG_NET_LL_GUARDSIZE)
| |
-------------------------------------------------
Ethernet | Reserved | ETH_HDRLEN | io_len |
---------------------------------|---------------
8021Q | Reserved | ETH_8021Q_HDRLEN | io_len |
---------------------------------|---------------
ipforward | Reserved | io_len |
-------------------------------------------------
--------------------------------------------------------------------
2. Support iob offload to l2 driver to avoid unnecessary memory copy
Support send/receive iob vectors directly between the NICs and l3/l4
stack to avoid unnecessary memory copies, especially on hardware that
supports Scatter/gather, which can greatly improve performance.
new interface to support iob offload:
------------------------------------------
| IOB version | original |
|----------------------------------------|
| devif_iob_poll() | devif_poll() |
| ... | ... |
------------------------------------------
--------------------------------------------------------------------
1> NIC hardware support Scatter/gather transfer
TX:
tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
/ \
/ \
devif_poll_[l3|l4]_connections() devif_iob_send() (nocopy:udp/icmp/...)
/ \ (copy:tcp)
/ \
devif_iob_poll("NIC"_txpoll) callback() // "NIC"_txpoll
|
dev->d_iob: |
--------------- ---------------
io_data iob1 | | | iob3 | | |
\ --------------- ---------------
--------------- | --------------- |
iob0 | | | | iob2 | | | |
--------------- | --------------- |
\ | / /
\ | / /
----------------------------------------------
NICs io vector | | | | | | | | | |
----------------------------------------------
RX:
[tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
|
|
[tcp|udp|icmp|...]_ipv[4|6]_in()/...
|
|
pkt/ipv[4/6]_input()/...
|
|
NICs io vector receive(iov_base to each iobs)
--------------------------------------------------------------------
2> CONFIG_IOB_BUFSIZE is greater than MTU:
TX:
"(CONFIG_IOB_BUFSIZE) > (MAX_NETDEV_PKTSIZE + CONFIG_NET_GUARDSIZE + CONFIG_NET_LL_GUARDSIZE)"
tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
/ \
/ \
devif_poll_[l3|l4]_connections() devif_iob_send() (nocopy:udp/icmp/...)
/ \ (copy:tcp)
/ \
devif_iob_poll("NIC"_txpoll) callback() // "NIC"_txpoll
|
"NIC"_send()
(dev->d_iob->io_data[CONFIG_NET_LL_GUARDSIZE - NET_LL_HDRLEN(dev)])
RX:
[tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
|
|
[tcp|udp|icmp|...]_ipv[4|6]_in()/...
|
|
pkt/ipv[4/6]_input()/...
|
|
NICs io vector receive(iov_base to io_data)
--------------------------------------------------------------------
3> Compatible with all old flat buffer NICs
TX:
tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
/ \
/ \
devif_poll_[l3|l4]_connections() devif_iob_send() (nocopy:udp/icmp/...)
/ \ (copy:tcp)
/ \
devif_iob_poll(devif_poll_callback()) devif_poll_callback() /* new interface, gather iobs to flat buffer */
/ \
/ \
devif_poll("NIC"_txpoll) "NIC"_send()(dev->d_buf)
RX:
[tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
|
|
[tcp|udp|icmp|...]_ipv[4|6]_in()/...
|
|
netdev_input() /* new interface, Scatter/gather flat/iob buffer */
|
|
pkt/ipv[4|6]_input()/...
|
|
NICs io vector receive(Orignal flat buffer)
3. Iperf passthrough on NuttX simulator:
-------------------------------------------------
| Protocol | Server | Client | |
|-----------------------------------------------|
| TCP | 813 | 834 | Mbits/sec |
| TCP(Offload) | 1720 | 1100 | Mbits/sec |
| UDP | 22 | 757 | Mbits/sec |
| UDP(Offload) | 25 | 1250 | Mbits/sec |
-------------------------------------------------
Signed-off-by: chao an <anchao@xiaomi.com>
2022-12-03 11:47:04 +08:00
dongjiuzhu1
e6f8ccda4a
net/get/setsockopt: add si_get/setsockopt interface to simply get/setsockopt
...
move private option to protocol sockif
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
2022-11-23 15:01:54 +08:00
Jari van Ewijk
51a845ce54
SocketCAN: add non-blocking write
...
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
2022-07-25 23:47:05 +08:00
chao.an
98833affd0
net/can: remove psock reference from can connect
...
remove the psock back reference since timestamp
has been migrated to can_conn_s
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-02-11 21:22:55 +08:00
chao.an
43ca28da36
net/can: replace the common connect prologue
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-02-10 15:04:33 -03:00
Alexander Lunev
36fbedcbfc
net/devif/devif_callback.c: corrected the connection event list to work as FIFO instead of LIFO.
...
In case of enabled packet forwarding mode, packets were forwarded in a reverse order
because of LIFO behavior of the connection event list.
The issue exposed only during high network traffic. Thus the event list started to grow
that resulted in changing the order of packets inside of groups of several packets
like the following: 3, 2, 1, 6, 5, 4, 8, 7 etc.
Remarks concerning the connection event list implementation:
* Now the queue (list) is FIFO as it should be.
* The list is singly linked.
* The list has a head pointer (inside of outer net_driver_s structure),
and a tail pointer is added into outer net_driver_s structure.
* The list item is devif_callback_s structure.
It still has two pointers to two different list chains (*nxtconn and *nxtdev).
* As before the first argument (*dev) of the list functions can be NULL,
while the other argument (*list) is effective (not NULL).
* An extra (*tail) argument is added to devif_callback_alloc()
and devif_conn_callback_free() functions.
* devif_callback_alloc() time complexity is O(1) (i.e. O(n) to fill the whole list).
* devif_callback_free() time complexity is O(n) (i.e. O(n^2) to empty the whole list).
* devif_conn_event() time complexity is O(n).
2021-09-18 21:01:39 -05:00
Peter Bee
e223f60c09
net/socket: move si_send/recv into sendmsg/recvmsg
...
Implement si_send/sendto/recvfrom with si_sendmsg/recvmsg, instead of
the other way round.
Change-Id: I7b858556996e0862df22807a6edf6d7cfe6518fc
Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
2021-03-05 04:46:13 -08:00
Ouss4
155903fc54
net/can/can.h: Add can_setsockopt and can_getsockopt prototypes.
2020-06-15 12:20:32 -06:00
Peter van der Perk
55d9e5f7af
net: Add SocketCAN support
2020-06-15 08:07:19 -06:00
