Gregory Nutt
0f10f6bdec
configs/*/include; Remove prototype of stm32_boardinitialize() from board.h files. The authorative prototype is in arch/arm/src/stm32*/stm32*_start.h
2017-12-16 20:02:03 -06:00
Gregory Nutt
5328e3bafb
configs/: CONFIG_QENCODER was renamed to CONFIG_SENSORS_QENCODER: update occurrences in several Kconfig files
2017-11-25 18:46:43 -06:00
Gregory Nutt
e761b80ea7
fs/vfs: file_read() is an internal OS interface and should not errors via the errno
2017-09-28 14:14:32 -06:00
Gregory Nutt
dc8f3778a9
drivers/sensors: Fix more naming of configurations to be compliant for two more drivers. Still a few more to go.
2017-08-24 10:26:53 -06:00
Gregory Nutt
dacdbb0005
nucleo_f4x1re: Should use the same Make.defs file for both F401 and F411.
2017-08-12 08:13:04 -06:00
Goran Mekić
3ae05042f4
Unify GCC/Clang config
2017-08-12 07:08:08 -06:00
Gregory Nutt
7e0b63242c
Move remaining, unique Make.defs files into scripts directory.
2017-07-11 11:39:07 -06:00
Gregory Nutt
e40ccc1b60
Move remaining, unique Make.defs files into scripts directory.
2017-07-11 11:14:11 -06:00
Gregory Nutt
422888733b
More conversions of defconfig files to compressed format. Not yet finished.
2017-07-09 19:25:19 -06:00
Gregory Nutt
90f38af8dc
More conversions of defconfig files to compressed format. Not yet finished.
2017-07-09 18:48:28 -06:00
Gregory Nutt
47be509d79
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
Gregory Nutt
e76c9875a4
Make.defs edited online with Bitbucket
2017-07-03 13:04:38 +00:00
Gregory Nutt
8fa5e9772b
Clang: Should there not be a prefix when using a cross compiler where clang refers to the host clang.
2017-07-02 06:51:21 -06:00
Gregory Nutt
cf44fd6ec0
Add CLANG definitions in Kconfig and Toolchain.defs
2017-07-02 06:42:48 -06:00
Goran Mekić
44bd7d3b7f
Initial clang compile
2017-07-02 06:24:26 -06:00
Gregory Nutt
c67b807f43
configs/: Remove dangling spaces at the end of lines in *.c and *.h files.
2017-06-28 13:21:20 -06:00
Gregory Nutt
cd54a0340f
Fix a typo. And typo in Kconfig file is reflect in all defconfig files.
2017-06-15 14:29:09 -06:00
Gregory Nutt
ff2b54a5e0
nucleo-f4x1re User LEDS: Issue #51 reports compilation problems with stm32_userled.c. Reported by Gappi92.
2017-06-01 06:44:24 -06:00
Gregory Nutt
b0fda33e13
Kconfig: Rename CONFIG_ARM_TOOLCHAIN_IAR to CONFIG_ARCH_TOOLCHAIN_IAR
2017-05-13 16:01:38 -06:00
Gregory Nutt
6e4918c557
Remove CONFIG_ARM_TOOLCHAIN_GNU; replace with CONFIG_ARCH_TOOLCHAIN_GNU
2017-05-13 13:28:15 -06:00
Gregory Nutt
7fe112fe4c
Kconfig/deconfigs: Add CONFIG_ARCH_TOOLCHAIN_GNU to indicate that the toolchain is based on GNU gcc/as/ld. This is in addition to the CPU-specific versions of the same definition.
2017-05-13 11:44:12 -06:00
Gregory Nutt
0de294a586
Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they.
2017-05-11 13:35:56 -06:00
Gregory Nutt
e9a5477506
Add an instance argument to the SPIDEV definitions.
2017-04-29 12:26:52 -06:00
Sebastien Lorquet
aca2e36d67
stm32 devboards
2017-04-28 18:26:05 +02:00
Gregory Nutt
2e6908b384
IOCTLS. Separate wireless character driver IOCTL commands from wireless network driver IOCTL commands. Move from wireless.h to ioctl.h.
2017-04-27 16:58:30 -06:00
Gregory Nutt
2f9028b547
Remove all remaining references to setenv.h and setenv.bat.
2017-04-26 10:28:37 -06:00
Gregory Nutt
9aac1dd44d
configs: Remove all setenv.bat files. Remove all references to setenv.sh and setenv.bat from all config README files.
2017-04-26 10:12:13 -06:00
Gregory Nutt
1620ff05f4
Remove all setenv.sh files.
2017-04-26 07:49:37 -06:00
Gregory Nutt
0652cbfd12
Update TODO list and README files.
2017-04-15 07:40:14 -06:00
Gregory Nutt
39b62c6b46
Changes from review of last PR
2017-04-13 06:50:33 -06:00
Gregory Nutt
77f980e676
Buttons: Correct some comments left after last button-related change: 32- vs 8-bit bit set.
2017-04-09 14:44:49 -06:00
Gregory Nutt
f9e402018b
Buttons: Change return value of board_buttons() and the type of btn_buttonset_t to uint32_t so that more than 8 buttons can be supported.
2017-04-09 07:22:49 -06:00
Gregory Nutt
c071e2a30c
Make sure that CONFIG_PTHREAD_MUTEX_ROBUST=y is selected every configuration that enabled pthreads.
2017-03-27 09:21:03 -06:00
Gregory Nutt
b07d3fc305
Rename CONFIG_MUTEX_TYPES to CONFIG_PTHREAD_MUTEX_TYPES
2017-03-27 09:08:14 -06:00
Gregory Nutt
c428661e18
apps/examples/usbterm is gone because it can be configured to perform an illegal call into the OS. Remove all traces of CONFIG_EXAMPLES_USBTERM* and all of the illegal device support.
2017-03-09 15:39:28 -06:00
Gregory Nutt
d0813aa0c5
Refresh all ARM configurations
2017-03-09 10:23:41 -06:00
Gregory Nutt
7a9a3bea2f
stm32_gpiosetevent: GPIO IRQ function should not return the xcpt_t oldhandler. This value is useful and potentially dangerous by itself after the change to assocaite a argument with the interrupt handler.
2017-03-02 18:36:14 -06:00
Gregory Nutt
f4bad1a280
stm32_gpiosetevent: GPIO IRQ logic no longer returns the xcpt_t oldhandler. This value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 16:34:37 -06:00
Gregory Nutt
4c82827ab1
board_button_irq: Button IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 14:37:22 -06:00
Gregory Nutt
67de2e5f66
Add argument to STM32 EXTI interrupt handlers.
2017-02-27 14:21:30 -06:00
Gregory Nutt
3129c7536e
CC3000: Add interrupt argument to all CC3000 interrupts.
2017-02-27 09:23:50 -06:00
Mark Schulte
b3222bbc8a
irq_dispatch: Add argument pointer to irq_dispatch
...
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
2017-02-27 06:27:56 -06:00
Gregory Nutt
3c4684ef5f
Eliminate CONFIG_ARCH_OPTIMIZED_FUNCTIONS. Move options to select architectur-specific C library options from libc/Kconfig to libc/machine/Kconfig and rename.
2017-01-20 09:30:07 -06:00
Gregory Nutt
f063e4c5ac
Remove Calypso architecture support and support for Calypso SERCOMM driver.
2016-12-13 18:35:52 -06:00
Gregory Nutt
d9e040d76b
Remove all Calypso board configurations
2016-12-13 18:24:49 -06:00
Gregory Nutt
ee2852f5ff
Remove all references to board_adc_setup()
2016-12-05 17:06:08 -06:00
Gregory Nutt
c0cbea2550
Remove RGMP and RGMP drivers.
2016-12-02 09:49:33 -06:00
Gregory Nutt
a0711b1c19
configs: All QE encoder files. Last change made timer hard-coded to 3. Make configurable.
2016-11-22 06:41:46 -06:00
Sebastien Lorquet
dfa2d107b2
The examples/qencoder app was trying to init the encoder by a direct call into the board, cheating in a local header to declare the normally unavailable function prototype.
2016-11-22 06:26:32 -06:00
Sebastien Lorquet
9dcecd4b15
Add support for qencoders on various nucleo boards
2016-10-03 16:07:20 +02:00
