Gregory Nutt
603f3afd6d
Some minor clean-up from last changes
2015-11-25 17:52:47 -06:00
Gregory Nutt
ed35eb0f8d
drivers/loop: Add a loop character device that can be used to setup and teardown loop devices
2015-11-25 17:13:56 -06:00
Ken Pettit
d4a58af380
drivers/mtd/mtd/mtd_procfs/c and include/nuttx/mtd/mtd.h: Add an interface to un-regiser an MTD procfs entry.
...
drivers/mtd/filemtd.c: New new MTD conversion layer that will convert a regular file (or driver file) to an MTD device. This is useful for testing on the simulation using the hostfs.
From Ken Petit
2015-11-25 14:46:28 -06:00
Gregory Nutt
e5f27f5865
Fix some conditional compilation. CONFIG_LIBC_LOCALTIME should be checked in most of the same places wehre CONFIG_TIME_EXTENDED is checked
2015-11-25 12:51:45 -06:00
Ken Pettit
c0b9dcf8a9
fs/hostfs: Add a special file system for use with simulator that supports access to the host file system from the simulation. From Ken Petit
2015-11-25 08:26:26 -06:00
Gregory Nutt
cd7c6705a8
mm.h: Use UINT32_MAX vs. SIZE_MAX in definition of MMSIZE_MAX
2015-11-25 08:11:32 -06:00
Gregory Nutt
6230e6e199
size_t should be 64-bits on a 64-bit machine. mmsize_t should be 32-bits (unless CONFIG_MM_SMALL is selected). This commit backs out the last change to stddef.h
2015-11-23 12:03:36 -06:00
Gregory Nutt
25ab59bf80
stddef.h: Use a round-about cast in the definition of offsetof() to avoid warnings on machines with 64 bit addresses and when size_t is less than 64-bits.
2015-11-23 07:11:05 -06:00
Ken Pettit
375419eaf2
mksmartfs: Remove fs/smartfs/fs_mksmartfs.c and related headers. This has been moved to apps/fsutils/mksmartfs. From Ken Petit
2015-11-23 07:05:09 -06:00
Gregory Nutt
54549ef082
Revert "Add option to specify logical sector size during low level format plus adds some run-time geometry tests. fs/smartfs: Remove the 'mksmartfs()' code from the kernel 'fs'"
...
This reverts commit 96faf0fa3251ca10a17daddc728d931be5a206e0.
2015-11-22 10:15:06 -06:00
Gregory Nutt
64e8f12e2b
Add option to specify logical sector size during low level format plus adds some run-time geometry tests. fs/smartfs: Remove the 'mksmartfs()' code from the kernel 'fs'
...
directory and build.
2015-11-22 10:07:35 -06:00
Gregory Nutt
006528b144
Add support for freopen()
2015-11-22 08:39:17 -06:00
Gregory Nutt
38c9d42e21
drivers/timers/pcf85263.c: Add a driver for the NXP PCF85263 I2C RTC
2015-11-20 17:36:10 -06:00
Gregory Nutt
db2fe45666
Update some comments
2015-11-20 09:55:18 -06:00
Gregory Nutt
4b29bcee7f
Rename up_rtcinitialize to up_rtc_initialize so that it looks like other RTC interfaces
2015-11-20 08:27:52 -06:00
Gregory Nutt
b60c2519d7
arch.h: Update some comments and conditional compilation
2015-11-20 07:13:16 -06:00
Gregory Nutt
c34b5108a7
RTC: Fix system time initialization when using an exernal RTC. Fix some bugs in the DS1307/DS3231 RTC driver
2015-11-19 14:54:30 -06:00
Gregory Nutt
678eb7b78b
Merged in paulpatience/nuttx/stdio (pull request #37 )
...
stdio: Define BUFSIZ
2015-11-18 14:46:03 -06:00
Paul A. Patience
c0a1d8e960
stdio: Define BUFSIZ
2015-11-18 15:09:43 -05:00
Gregory Nutt
f699072507
Merged in paulpatience/nuttx/stdlib (pull request #36 )
...
stdlib: Fix forgotten FARs
2015-11-18 14:01:17 -06:00
Paul A. Patience
bfc95c641f
stdlib: Fix forgotten FARs
2015-11-18 14:22:43 -05:00
Paul A. Patience
706218d18f
atoi(): Cast return value to int
2015-11-18 14:12:29 -05:00
Gregory Nutt
622ea95ab1
drivers/timers/ds3213.c: Extend to include support for the DS1307 RTC
2015-11-18 08:43:19 -06:00
Gregory Nutt
4579f0c1fc
Add a command to boardctl() to obtain a baord unique ID
2015-11-18 07:31:53 -06:00
Gregory Nutt
25c4ff8285
Update some comments
2015-11-17 16:29:34 -06:00
Gregory Nutt
c0a701b779
Merged in wail007/nuttx (pull request #33 )
...
Added a lower-half timer driver for stm32 which is compatible with the upper-half driver located at /drivers/timers/timer.c
2015-11-17 16:23:03 -06:00
Wail Khemir
09b9d6ba1f
Added a lower-half timer driver for stm32 which is compatible with the upper-half driver located at /drivers/timers/timer.c
2015-11-17 16:39:21 -05:00
Gregory Nutt
45530a77d4
Add support for DS3231 I2C RTC. Untested on initial commit.
2015-11-17 14:07:55 -06:00
Gregory Nutt
e61d51dab3
If multiple AT24xx devices are supported and resources are allocated, then it may also be necessary to free those resource
2015-11-17 08:39:06 -06:00
Gregory Nutt
f5722bc6dd
Merged in slorquet/nuttx/pca9555 (pull request #32 )
...
Pca9555 interrupt support.
2015-11-17 07:45:33 -06:00
Gregory Nutt
724901ceb9
Add support for multiple AT24xx EEPROM devices
2015-11-17 07:40:17 -06:00
Sebastien Lorquet
c7999141e7
Merge branch 'master' into pca9555
2015-11-17 14:12:03 +01:00
Sebastien Lorquet
826aadbce8
Include support for PCA9555 interrupt driven IO changes detection.
...
Currently using a signal, and a single notified task.
signal handling support moved to generic IO expander header (not pca specific)
2015-11-17 14:09:43 +01:00
Gregory Nutt
580529ba23
crypto/aes.c: Make refernce to key const
2015-11-16 14:30:43 -06:00
Gregory Nutt
c955cdccd9
Move rivers/wireless/cc3000/security.c to crypto/aes.c; move include/nuttx/wireless/cc3000/security.h to include/nuttx/crypto/aes.h
2015-11-16 13:31:02 -06:00
Gregory Nutt
815ec07b55
CAN: A minor improvement to can_txready design
2015-11-15 06:36:30 -06:00
Gregory Nutt
d6eb48d1ab
Update comments
2015-11-14 14:00:39 -06:00
Gregory Nutt
81ab270a96
CAN driver: Removing call to can_xmit() from can_txready() in a previous commit was a mistake. This commit restores the call to can_xmit(), but does the call in a safer environment on the work thread.
2015-11-14 10:33:02 -06:00
Sebastien Lorquet
8242600e5e
WIP for pca9555 irq
2015-11-13 16:28:46 +01:00
Gregory Nutt
fdb17620a0
Need a prototype for progmem_initialize in include/nuttx/mtd/mtd.h
2015-11-12 16:03:24 -06:00
Max Neklyudov
d54a39832a
Implement high level DMA infrastructure for serial devices
2015-11-12 14:16:19 -06:00
Gregory Nutt
ef59f83a38
drivers/mtd/mtd_progmem.c: Add an upper-half driver that can be used with any FLASH library that provides the itnerfaces defined in include/nuttx/progmem.h
2015-11-12 13:40:18 -06:00
Gregory Nutt
5eaf368d16
progmem.h: Cosmetic updates to comments
2015-11-12 12:30:15 -06:00
Gregory Nutt
7fe6200b0f
progmem.h: Clean-up a few comments
2015-11-11 14:30:06 -06:00
Gregory Nutt
e62673241d
Eliminate some useless comments
2015-11-11 11:02:52 -06:00
Gregory Nutt
965addb397
s25fl1: When unprotecting, handle case where protection bits are inverted. Add option to s25flinitilize() to unprotected on power up
2015-11-10 11:33:35 -06:00
Gregory Nutt
95562f8a86
CAN driver: More improved comments
2015-11-08 07:43:57 -06:00
Gregory Nutt
91429433f6
Correct naming of Spansion part. S25FL1, not ST25FL1
2015-11-07 11:51:09 -06:00
Paul A. Patience
4c70fc181a
ADC: Fix forgotten FARs
2015-11-05 10:27:47 -05:00
Gregory Nutt
c6fc285277
CAN: Add a new CAN upper-half interface, can_txready(), that can be used to break deadlock conditions in certain CAN hardware that supports queuing of TX messages
2015-11-03 10:52:58 -06:00
Gregory Nutt
51d29d3c97
Merged in paulpatience/nuttx/pwm (pull request #29 )
...
PWM: Add support for multiple output channels per timer
2015-11-01 16:40:06 -06:00
Paul A. Patience
e8c2466c1c
PWM: Add support for multiple output channels per timer
2015-11-01 17:15:12 -05:00
Gregory Nutt
fc91ded815
Add support for a general user LED lower-half driver
2015-11-01 14:57:22 -06:00
Gregory Nutt
0dea00177e
Add a generic user LED upper half discrete driver
2015-11-01 14:41:40 -06:00
Gregory Nutt
cbb78071b3
Rename ioexpander/ directories to discrete/
2015-11-01 13:14:48 -06:00
Gregory Nutt
56ad07f02b
Add standard naming for board user LED functions
2015-11-01 12:48:13 -06:00
Gregory Nutt
2318038bbc
Rename board_led_off to board_autoled_off
2015-11-01 09:10:40 -06:00
Gregory Nutt
8093def2c8
Rename board_led_on to board_autoled_on
2015-11-01 09:07:46 -06:00
Gregory Nutt
148d5fcffd
Rename board_led_initialize to board_autoled_initiaize
2015-11-01 09:04:02 -06:00
Gregory Nutt
68c4dedb78
Named semaphores: Bad cast in sem_close(). Fixed by reordering fields of struct nsem_inode_s so that the cast will work
2015-10-23 07:13:47 +08:00
Gregory Nutt
d8731d0ef1
Add files missed in previous commit
2015-10-18 08:00:06 +08:00
Gregory Nutt
f5f69ef85d
Add a file missed in the last commit
2015-10-13 07:36:46 -06:00
Alan Carvalho de Assis
8f0c912fff
Add Zero Cross device driver support
2015-10-13 07:27:16 -06:00
Gregory Nutt
613798027e
Add a button upper/lower half driver
2015-10-12 14:29:43 -06:00
Gregory Nutt
1e6ffe7677
TMPFS update
2015-10-08 14:21:12 -06:00
Gregory Nutt
863ded3584
Standardize the width of all comment boxes in C header files
2015-10-03 07:45:15 -06:00
Gregory Nutt
0f90500f72
Standardize the width of all comment boxes in header files
2015-10-02 17:48:24 -06:00
Gregory Nutt
cb9e27c3b0
Standardize naming used for public data and function groupings
2015-10-02 16:30:35 -06:00
Gregory Nutt
38e6142ae8
Make coding style more conformant, take description from OpenGroup.org, rename formal parameters to match names used on OpenGroup.org
2015-10-02 12:58:40 -06:00
Gregory Nutt
2ba224eca2
Add support for bsearch() in C library
2015-10-02 12:33:58 -06:00
Alan Carvalho de Assis
c52e3e017b
Battery Charger: Add BQ24250 driver
2015-09-20 09:47:00 -06:00
Alan Carvalho de Assis
d4fc91d6f6
Add Battery Fault and Battery Disconnected status
2015-09-20 09:32:06 -06:00
Alan Carvalho de Assis
895ad29b0d
Fix IOCTL definition to avoid duplication and mess
2015-09-19 13:58:49 -06:00
Alan Carvalho de Assis
3cd7558a5e
Add basic infrastructure for Battery Charger
2015-09-19 13:06:43 -06:00
Alan Carvalho de Assis
9f465fc502
Rename battery.[ch] to battery_gauge.[ch]
2015-09-19 11:00:14 -06:00
Alan Carvalho de Assis
c4cf5be231
Add support to Maxim MAX31855 Thermocouple-to-Digital
2015-09-13 15:56:48 -06:00
Pierre-noel Bouteville
8651e0f2ca
CC3300: Add const to pointers in arguments to wlan_connect; remove an unused function prototype
2015-09-09 16:34:37 -06:00
Gregory Nutt
8a87e3ca6e
Add an empty function that can serve as a placeholder for the network shutdown() function
2015-09-09 07:03:05 -06:00
Sebastien Lorquet
77e4e7b231
Change all references from avsprintf to vasprintf. From Sebastien Lorquet
2015-09-07 13:22:13 -06:00
Paul A. Patience
c080146748
SSD1351 driver: add 8-bit parallel interface
2015-09-06 13:28:28 -04:00
Gregory Nutt
7d33e858dd
QSPI interface + ST25FL1 driver: Add methods to allocate properly aligned memory
2015-09-06 09:37:34 -06:00
Gregory Nutt
9c66bde5b0
Fix typo in pre-processor command noted by Pierre-noel Bouteville. Also move # of pre-processior command to column 1
2015-09-05 09:10:48 -06:00
Paul A. Patience
3b89eabd50
Correct #if to #ifdef when the macro can be undefined. Fix bug in AT24XX driver: it should compare AT24XX_ADDRSIZE to 2.
2015-09-01 13:52:29 -04:00
Gregory Nutt
2d84270552
ST25FL1: Correct some compile problems when file system debug is enabled
2015-08-31 09:25:14 -06:00
Gregory Nutt
d6b0a8fe72
ST25FL1 driver is code complete
2015-08-29 15:58:54 -06:00
Gregory Nutt
bfc3c98e12
Move MTD ioctls commands from include/nuttx/fs/fs.h to include/nuttx/mtd/mtd.h. Add commands to protect and unprotect memory
2015-08-29 10:54:38 -06:00
Gregory Nutt
883c6a7cea
Merge remote-tracking branch 'origin/master' into st25fl1
2015-08-29 08:02:57 -06:00
Gregory Nutt
8c001f6807
Merged in paulpatience/nuttx (pull request #21 )
...
Add SSD1351 OLED controller support
2015-08-28 17:01:24 -06:00
Paul A. Patience
01b68e90d0
Add SSD1351 OLED controller support
2015-08-28 18:37:01 -04:00
Gregory Nutt
e392471dc2
QSPI interface: Add support for dual and quad read transfers; Add support for dummy read cycles.
2015-08-28 12:00:06 -06:00
Gregory Nutt
70bdf682af
QSPI: Add support for data vs command transfer
2015-08-28 10:15:08 -06:00
Gregory Nutt
361e35a7be
QSPI: Make changes to interface to better work with the SAMV71
2015-08-27 14:16:51 -06:00
Gregory Nutt
e6be3cea9f
Merge remote-tracking branch 'origin/master' into st25fl1
2015-08-26 10:44:35 -06:00
Gregory Nutt
7a168a791f
Networking: Fix loopback device MTU
2015-08-26 10:33:44 -06:00
Gregory Nutt
6dadfcbf6b
Add QSPI interface definition
2015-08-25 15:26:16 -06:00
Gregory Nutt
933d74e5c1
Networking: With these changes, I can ping the local loopback device from the simulator
2015-08-24 13:49:12 -06:00
Gregory Nutt
0b012c7978
Fix some initial loop back device compilation errors; mark configuration as EXPERIMENTAL
2015-08-24 11:29:54 -06:00
Gregory Nutt
07bdff9ef7
Networking: Add NetDB support for the local loopback device
2015-08-24 10:08:26 -06:00
Gregory Nutt
e21501c699
Merge remote-tracking branch 'origin/master' into localhost
2015-08-24 08:29:36 -06:00
Gregory Nutt
569ff602ea
Networking: Remove bogus references to PPP as a link layer protocol
2015-08-24 08:29:07 -06:00
