Adding the CONFIG_ARCH_PERF_EVENTS configuration to enable
hardware performance counting，solve the problem that some platform
hardware counting support is not perfect, you can choose to use
software interface.
This is configured using CONFIG_ARCH_PERF_EVENTS, so weak_functions
are removed to prevent confusion
To use hardware performance counting, must:
1. Configure CONFIG_ARCH_PERF_EVENTS, default selection
2. Call up_perf_init for initialization
Signed-off-by: wangming9 <wangming9@xiaomi.com>
The naming of the clang configuration file has changed after version 14
This commit will enable the compatibility with clang-14/15/16/17
Signed-off-by: chao an <anchao@xiaomi.com>
Fix buffer overflow issue from PR #10128, since the sizeof
xcpt_reg_t is different on 32/64 bit platform.
Signed-off-by: chenxiaoyi <chenxiaoyi@xiaomi.com>
Summary
Qemu virt board can choice CPU core with boot parameter
and we need to add Konfig option for choice
the change do this
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
Sumary
add hostfs support for arm64, it's a copy
from arm32.
Note:
it's not support for opendir and readdir, command
like ls will not work.
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
add set/get_power operation for sim_framebuffer to avoid assert
in fb_ioctl(cmd= FBIOSET_POWER/FBIOGET_POWER)
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
In armv8m the FPSCR[18:16] LTPSIZE field must be set to 0b100 for
"Tail predication not applied" as it's reset value.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
1. virtio devics/drivers match and probe/remote mechanism;
2. virtio mmio transport layer based on OpenAmp (Compatible with both
virtio mmio version 1 and 2);
3. virtio-serial driver based on new virtio framework;
4. virtio-rng driver based on new virtio framework;
5. virtio-net driver based on new virtio framework
(IOB Offload implementation);
6. virtio-blk driver based on new virtio framework;
7. Remove the old virtio mmio framework, the old framework only
support mmio transport layer, and the new framwork support
more transport layer and this commit has implemented all the
old virtio drivers;
8. Refresh the the qemu-arm64 and qemu-riscv virtio related
configs, and update its README.txt;
New virtio-net driver has better performance
Compared with previous virtio-mmio-net:
| | master/-c | master/-s | this/-c | this/-s |
| :--------------------: | :-------: | :-------: | :-----: | :-----: |
| qemu-armv8a:netnsh | 539Mbps | 524Mbps | 906Mbps | 715Mbps |
| qemu-armv8a:netnsh_smp | 401Mbps | 437Mbps | 583Mbps | 505Mbps |
| rv-virt:netnsh | 487Mbps | 512Mbps | 760Mbps | 634Mbps |
| rv-virt:netnsh_smp | 387Mbps | 455Mbps | 447Mbps | 502Mbps |
| rv-virt:netnsh64 | 602Mbps | 595Mbps | 881Mbps | 769Mbps |
| rv-virt:netnsh64_smp | 414Mbps | 515Mbps | 491Mbps | 525Mbps |
| rv-virt:knetnsh64 | 515Mbps | 457Mbps | 606Mbps | 540Mbps |
| rv-virt:knetnsh64_smp | 308Mbps | 389Mbps | 415Mbps | 474Mbps |
Note: Both CONFIG_IOB_NBUFFERS=64, using iperf command, all in Mbits/sec
Tested in QEMU 7.2.2
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
The first time interrupt nesting occurs between REE and TEE,
CURRENT_REGS needs to be set.
If TEE nesting REE breaks, then EXC_RETURN.S=0,EXC_RETURN.ES=1;
Conversely, EXC_RETURN.S=1,EXC_RETURN.ES=0;
Interrupt nesting between TEE and REE can be determined based
on the S and ES bits of EXC_RETURN.
Only once nesting between TEE and REE is supported, and cyclic
nesting between TEE and REE is not supported.
Signed-off-by: wangming9 <wangming9@xiaomi.com>
1、The process stack supports interrupt nesting, Execute in MSP;
2、The interrupt stack supports interrupt nesting;
The thread mode use PSP, and the handle mode use MSP;
3、Adjust arm_doirq、exception_common implementation to meet interrupt nesting
4、Adjust the conditions for returning MSP and PSP;
5、remove setintstack;
Signed-off-by: wangming9 <wangming9@xiaomi.com>
1、The process stack supports interrupt nesting, Execute in MSP;
2、The interrupt stack supports interrupt nesting;
The thread mode use PSP, and the handle mode use MSP;
3、Adjust arm_doirq、exception_common implementation to meet interrupt nesting
4、Adjust the conditions for returning MSP and PSP;
5、remove setintstack;
Signed-off-by: wangming9 <wangming9@xiaomi.com>
1、The process stack supports interrupt nesting, Execute in MSP;
2、The interrupt stack supports interrupt nesting;
The thread mode use PSP, and the handle mode use MSP;
3、Adjust arm_doirq、exception_common implementation to meet interrupt nesting
4、Adjust the conditions for returning MSP and PSP;
5、remove setintstack，add arm_initialize_stack;
Signed-off-by: wangming9 <wangming9@xiaomi.com>
VELAPLATFO-12536
This provides the initial hooks for Flattened Device Tree support
with QEMU RV. It also provides a new procfs file that exposes the
fdt to userspace much like the /sys/firmware/fdt endpoint in Linux.
See https://www.kernel.org/doc/Documentation/ABI/testing/sysfs-firmware-ofw
Nodes in the fdt are not yet usable by the OS.
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
Signed-off-by: liaoao <liaoao@xiaomi.com>
For TEE & REE, securefault & busfault are not banked, so the faults can
only forword to TEE/REE.
But how to crash dump the other core which not handled faults ?
Here we provide a way to resolve this problem:
1. Set the securefault & busfault to TEE
2. busfault happend from TEE, then directly dump TEE
3. busfault happend from REE, then generate nonsecurefault
4. Back to REE, and dump
Signed-off-by: ligd <liguiding1@xiaomi.com>
We can use the driver in nuttx to download
files with debugger
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Signed-off-by: chao an <anchao@xiaomi.com>
FlexCAN before used interrupts to process incoming frames.
This patch adds a HPWORK workqueue to process incoming frames in the workqueue
context instead. Also renamed mbi to txmb for better readability.
This PR adds support for the StarFive JH7110 RISC-V SoC. This will be used by the upcoming port of NuttX for PINE64 Star64 SBC. [The source files are explained in the articles here](https://github.com/lupyuen/nuttx-star64)
Modified Files in arch/risc-v:
Kconfig: Added ARCH_CHIP_JH7110 for JH7110 SoC
New Files in arch/risc-v:
include/jh7110/chip.h: JH7110 Definitions
include/jh7110/irq.h: Support 127 External Interrupts
src/jh7110/chip.h: Interrupt Stack Macro
src/jh7110/jh7110_allocateheap.c: Kernel Heap
src/jh7110/jh7110_head.S: Linux Header and Boot Code
src/jh7110/jh7110_irq.c: Configure Interrupts
src/jh7110/jh7110_irq_dispatch.c: Dispatch Interrupts
src/jh7110/jh7110_memorymap.h: Memory Map
src/jh7110/jh7110_mm_init.c, jh7110_mm_init.h: Memory Mgmt
src/jh7110/jh7110_pgalloc.c: Page Allocator
src/jh7110/jh7110_start.c: Startup Code
src/jh7110/jh7110_timerisr.c: Timer Interrupt
src/jh7110/hardware/jh7110_memorymap.h: PLIC Base Address
src/jh7110/hardware/jh7110_plic.h: PLIC Register Addresses
src/jh7110/Kconfig: JH7110 Config
src/jh7110/Make.defs: Makefile
* Error handling for abnormal interrupts and DMA errors is now
enabled for all builds, regardless of any DEBUG configuration.
* Error handling resets the MAC for the specific errors that
may halt the Ethernet operation, instead of everything as it
was before.
The window opens when the fb opens and closes when the fb closes.
test step: run fb demo, 1. ./nuttx 2. fb
Signed-off-by: jianglianfang <jianglianfang@xiaomi.com>
- Added Wi-Fi related symbols to the kernel-space linker;
- Allocate more RAM to the kernel (to be useb by the Wi-Fi driver).
- Create a specific defconfig.
Instead of setting kernel/user space instruction and data ROM as
hard-coded values on linker, set them according to the max size
of the kernel image set by CONFIG_ESP32S3_KERNEL_IMAGE_SIZE. This
is done by making KIROM, UIROM, KDROM and UDROM dependent on the
kernel size value. Also, override CONFIG_NUTTX_USERSPACE config
according to CONFIG_ESP32S3_KERNEL_IMAGE_SIZE by using a custom
PREBUILD definition.
when executing ioctl AUDIOIOC_GETBUFFERINFO,the priv->pcm is still NULL,
so it will return -ENXIO,we can remove this check at the start of ioctl
and add in the case where it is used.
Signed-off-by: shipei <shipei@xiaomi.com>
When supporting high-priority interrupts, updating the
g_running_tasks within a high-priority interrupt may be
cause problems. The g_running_tasks should only be updated
when it is determined that a task context switch has occurred.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
stack_t used by sigaltstack, make it compile sucess in sim.
Signed-off-by: yangyalei <yangyalei@xiaomi.com>
ltp: fix compile errors
Signed-off-by: yangyalei <yangyalei@xiaomi.com>
Instead of clearing the fields individually, just wipe the whole register.
This can be done because flags and rm are just parts of the fcsr.
31 8 5 0
+--------------+--------+-----------+
| | | |
| RESERVED | FRM | FSTATUS |
| | | |
+--------------+--------+-----------+
FCSR
- Save the FPU registers into the tcb so they don't get lost if the stack
frame for xcp.regs moves (as it does)
- Handle interger and FPU register save/load separately
- Integer registers are saved/loaded always, like before
- FPU registers are only saved during a context switch:
- Save ONLY if FPU is dirty
- Restore always if FPU has been used (not in FSTATE_OFF, FSTATE_INIT)
- Remove all lazy-FPU related logic from the macros, it is not needed
Why? The tcb can contain info that is needed by the context switch
routine. One example is lazy-FPU handling; the integer registers can
be stored into the stack, because they are always stored & restored.
Lazy-FPU however needs a non-volatile location to store the FPU registers
as the save feature will skip saving a clean FPU, but the restore must
always restore the FPU registers if the thread uses FPU.
In the init phase of the OS, arch_get_current_tcb return NULL. Enable
the memory backatrace default will crash in backtrace function.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
If the cache is already enabled before NuttX starts up,
enabling the cache in NuttX will cause the cache to be
re-invalidated, then resulting in data that is already
in the cache being flushed out.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Basically, it reserves an area of the RTC memory to preserve the
RTC timer.
Please refer to:
fa76c82a5b
This commit also removes the rtc.dummy section because C3, C6 and
H2 don't need to skip it once the region is accessed by the same
address space using the instruction and data bus.
1. add lib_fork api in libs/libc, we need a fork() api to implement the
fork relative method, such as pthread_atfork
2. rename the assembly fork entry function name to up_fork(), and rename
the up_fork() to arch specific name, such as
sim_fork()/arm_fork()/mips_fork() etc.
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
Clone the esp-hal-3rdparty repository and, then, checkout to a
specific version (usually indicated by the commit SHA) instead of
using a branch as the HEAD.
Also switch to automatic one by default, as it saves a lot of flash. The manual training
code is left in for now to be able to use it as an option if there are problems with automatic one
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
The implementation of up_perf_*() is in a different static library in nuttx:
Hardware: libarch.a
Software: libdrivers.a (weak function)
Since functions with weak attributes cannot be correctly replaced in multiple static libraries,
this PR will use macros to replace whether the arch supports hardware perf events
Signed-off-by: chao an <anchao@xiaomi.com>
If -fstack-protector-all is enabled, gcc linker will need GCC
SSP(Stack Smashing Protector) support, Since the implement of SSP
is related to the OS, most of embedded toolchain does not provide
ssp support, so an error will be reported when linking:
enable CONFIG_LTO_FULL && CONFIG_STACK_CANARIES
arm-none-eabi/bin/ld: cannot find -lssp_nonshared: No such file or directory
arm-none-eabi/bin/ld: cannot find -lssp: No such file or directory
https://github.com/gcc-mirror/gcc/blob/master/gcc/gcc.cc#L983-L985
Since nuttx has already implemented SSP related hook functions,
so in this PR, we filter out this option in the link phase to ensure that
the implementation of lssp/lssp_nonshared will not be referenced
Signed-off-by: chao an <anchao@xiaomi.com>
Writes to MPFS_CFG_DDR_SGMII_PHY_EXPERT_DFI_STATUS_OVERRIDE register were not done properly. Use correct address for writes.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Reading the CSD field misses 3 bytes as the residual bytes
are not carried over properly. Fix this by adding the missing
bytes due to shifting.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
According to the ARMv7a/r/m and ARMv8m architecture manuals
The allowed values are
0 Data or unified cache.
1 Instruction cache.
"One CCSIDR is implemented for each cache that can be accessed by the processor. CSSELR selects which Cache Size ID Register is accessible, see c0, Cache Size Selection Register (CSSELR)."
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
