sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
35,569 Commits 1 Branch 0 Tags 291 MiB
99a501b668
Commit Graph

40 Commits

Author SHA1 Message Date
Xiang Xiao
6c484847d5 net/: Decouple autoconfig and icmpv6 socket to avoid the invalid kconfig combination. 2019-09-20 12:45:05 -06:00
Gregory Nutt
6266e067e9 net/: Re-order the content of all address-family socket 'connection' structures so that they begin with a comomon prologue. This permits better use of logic for different address family types. 2019-09-01 08:47:01 -06:00
anchao
c9b73f5139 net/icmp and icmpv6: Bind icmp callback from device to connection. Resolves the issue that bind() could not be called before send() 2019-03-19 09:43:32 -06:00
Gregory Nutt
68a115aed9 net/icmpv6/icmpv6_autoconfig.c and icmpv6_rnotify.c: Don't take the network device down when reconfiguring only the IP address from within ICMPv6 logic. Recommended by Xiang Xiao in order to avoid the long delays of bringing some networks back up. 
Normally it is required that the network be in the "down" state when re-configuring the network interface.  This is thought not to be a necessary here because.

  1. The ICMPv6 logic here runs with the network locked so there can be no outgoing packets with bad source IP addresses from any asynchronous network activity using the device being reconfigured.
  2. Incoming packets depend only upon the MAC filtering.  Network drivers do not use the IP address; they filter incoming packets using only the MAC address which is not being changed here.
 2018-11-10 07:13:54 -06:00
Xiang Xiao
4f25b83f8f et/icmpv6: Remove the coupling between ICMPv6 and Ethernet by moving all Ethernet stuff to neighbor_ethernet_out.c and make the mac address as first field. 2018-11-09 15:41:23 -06:00
Xiang Xiao
a3cda3867b net/icmpv6/icmpv6_linkipaddr.c: Encapsulate the link scope address generation into icmpv6_linkipaddr() 2018-11-09 15:28:58 -06:00
Xiang Xiao
44bcd2c44d net/: add NET_ICMP[v6]_NO_STACK for usrsock case 2018-11-09 11:25:57 -06:00
Gregory Nutt
33ed27ae65 Squashed commit of the following: 
net/mld: Checksum calculation needs to know the full size of the IPv6 header, including the size of the extension headers.  The payload size in the IPv64 header must include the extension headers (not considered part of the header in this case).  Fixes a few additional errors in size, endian-ness and checksum calculations.  Wireshark now reports the the outgoing Report has a good checksum.

    net/mld/mld_query.c:  Add a cast to assure that the left shift does not overflow.
 2018-11-05 08:56:07 -06:00
Gregory Nutt
42a018747e net/devif, net/tcp, and net/udp: Extend the logic of 6c0ab0e077 so that all support Transport protocols support by IPv6 can handle the presence of IPv6 header extension options. 2018-11-02 17:50:01 -06:00
Gregory Nutt
6c0ab0e077 Squashed commit of the following: 
include/nuttx/net/ipv6ext.h:  Fix some terminology:  Hop-by-hop, not Hop-to-hop or Hop2hop.

    net/devif/ipv6_input.c and net/icmpv6/icmpv6_input.c:  Add logic to skiip over the variable number of IPv6 extension headers that may be present between the IPv6 header and the transport layer header.  The extension headers are simply ignored.  This is necessary because with MLD, certain incoming messages may have, at a mimimum, a Router Alert Hop-by-hop extension header.

    net/inet/ipv6_setsockopt.c:  Implement the IPV6_JOIN_GROUP and IPV6_LEAVE_GROUP socket options.
 2018-11-02 12:06:57 -06:00
Xiang Xiao
40b0e98d25 net/icmp/icmp_conn.c and net/icmpv6/icmpv6_conn.c: Change the type of id in icmpv[6]_findconn to uint16_t 2018-08-26 15:28:02 -06:00
Gregory Nutt
b54ffe858a Standardization of some function headers. 2018-03-13 09:52:27 -06:00
SP
52d54b2451 net/icmpv6/icmpv6: Eliminate warnings by correct the type uses to link structure into lists. 2018-02-23 08:04:50 -06:00
Gregory Nutt
7cf88d7dbd Make sure that labeling is used consistently in all function headers. 2018-02-01 10:00:02 -06:00
Gregory Nutt
74a633ea94 net/icmpv6: Remove the 'list' field from struct icmpv6_conn_s. It is not used. 2017-11-21 10:25:27 -06:00
Gregory Nutt
6163033439 net/icmpv6: Remove prototype for obsolete, removed function. 2017-10-24 16:57:24 -06:00
Gregory Nutt
70c59a9d91 This commit adds support for semi-standard IPPROTO_ICMP6 sockets. This is a replacement for the non-standard ICMPv6 ping support that violated the portable POSIX OS interface. 
Squashed commit of the following:

    net/icmpv6: IPPROT_ICMP6 socket logic now builds without error.
    net/icmpv6:  Add support for read-ahead and poll(). Initial commit is just cloned from ICMP with the appropriate name changes.
    configs/:  All defconfig filess that include CONFIG_NET_ICMPv6_SOCKET=y need to select CONFIG_SYSTEM_PING6=y and deselect CONFIG_DISABLE_POLL.
    Update NSH documention to show that ping6 is now a built in command.
    net/icmpv6:  Add icmpv6_sendto.c and icmpv6_recvfrom.c.  Initial versions are just clones from icmp/ with appropriate name changes.
    net/icmpv6:  Clone some ICMP socket logic as the beginning of support for ICMPv6 socket support.
    Rename CONFIG_NET_ICMPv6_PING to CONFIG_NET_ICMPv6_SOCKET.  Move prototype for icmpv6_ping from include/nuttx/net/icmpv6 to net/icmpv6/icmpv6.h
 2017-10-24 11:23:08 -06:00
Gregory Nutt
0b2a4eb4bd Networking: A little more wording changes related to interrupts vs. events 2017-08-29 15:08:38 -06:00
Gregory Nutt
aeb59383cf Remove CONFIG_NET_MULTILINK. This increases code size by a little, but greatly reduces the complexity of the network code. 2017-08-08 15:26:09 -06:00
Gregory Nutt
aa2e9c15a5 IP forwarding: Major rearchitecting of the outgoing portion of the IP forwarding logic necessary into to properly received device-related forwarding events. 2017-07-07 20:19:26 -06:00
Gregory Nutt
31f832d8c5 IP forwarding: Flesh out TCP, UDP, and ICMPv6 packet forwarding logic. 2017-07-05 11:01:16 -06:00
Gregory Nutt
c0c275c8fc IP forwarding. Adds a little more structure to handle passing packets received on one network device to another network device. Logic is still incomplete. 2017-07-04 10:19:52 -06:00
Gregory Nutt
01b0a56371 TCP: tcp_input() now receives IP domain as an input parameter vs. deriving from the IP header length. 2017-05-25 08:02:08 -06:00
Gregory Nutt
d5207efb5a Be consistent... Use Name: consistent in function headers vs Function: 2017-04-21 16:33:14 -06:00
Gregory Nutt
8f7752d956 Networking: Modify how callback structures are stored to avoid another potential use of a stal pointer. 2015-06-03 08:11:57 -06:00
Gregory Nutt
e81f279315 Networking: Modify event list handling: Now there are two event lists each device structure: (1) One is for ARP and ICMP data related evetns, the other is for device related events. Callback allocation/free routines no accept a device paramter as well as a list: If the device paramter is added, then the callback goes into both the connection-related liast AND the device event list. Thus each socket type can received both custom data-related events as well as common device related events. 2015-05-28 12:01:38 -06:00
Gregory Nutt
b94321cfb4 Extend device specific callbacks to ICMPv6 and ARP. Fix some IPv6 compilation errors that have crept in 2015-05-27 11:39:44 -06:00
Gregory Nutt
6568d94902 ICMPv6: Add logic to behave like a router (if so configured): NuttX will not send the router advertisement message in response to any router solicitation messages. 2015-02-05 09:43:29 -06:00
Gregory Nutt
28b89b7a65 ICMPv6 Auto-configuration: If no router reponds to the Router Solicitation, claim the link local address by sending the Neighbor Advertisement and return success 2015-02-04 16:13:27 -06:00
Gregory Nutt
c5ed77120f ICMPv6: Separate out Neighbor Advertise message so that we can reuse it 2015-02-04 15:43:54 -06:00
Gregory Nutt
9791e829f5 ICMPv6: This completes coding of the ICMPv6 auto-configuration feature. It is not yet functional 2015-02-03 15:40:56 -06:00
Gregory Nutt
66f0198e3f Networking: Add support for sending ICMPv6 Router Solicitation and receiving Router advertisement. This is a part of the ICMPv6 auto-configuration logic is still still not complete 2015-02-03 13:25:28 -06:00
Gregory Nutt
88f6573f31 ICMPv6: Add file/build structure that will eventually support ICMPv6 auto-configuration 2015-02-02 17:54:48 -06:00
Gregory Nutt
bba3fccd74 Networking: Apply the same ARP fix for the Neighbor Solicitation logic 2015-02-02 14:50:16 -06:00
Gregory Nutt
a07a764d42 ICMPv6: Adds basic logic to support verification that we have the IPv6 address in the Neighbor Table. This feature is important because otherwise the first packet sent to a remote peer will fail (it will be replaced with a Neighbor Solicitation). 2015-02-02 13:44:31 -06:00
Gregory Nutt
b1b8c0e47d IPv6: More framework for automatic neighbor solicition. I think this also corrects and error in a broadcast/multicast address chedk 2015-02-02 11:34:51 -06:00
Gregory Nutt
3385082b99 IPv6: Remove an unusd file (kruft from original IPv6 develoment); Add inital hooks to support automatic Neighbor Solitication 2015-02-02 10:49:50 -06:00
Gregory Nutt
67a655ecf0 Networking: Add logic to search the Neighbor Table and update the destination address in the output Ethernet header OR to send an ICMPv6 Neighbor Solicitation if there is no entry in the Neighbor table for the IPv6 address 2015-01-20 14:37:02 -06:00
Gregory Nutt
5a441ce03b Networking: Misck IPv6 detanglement 2015-01-15 12:19:44 -06:00
Gregory Nutt
a7ce1279f9 Networking: (1) Copied all ICMP sources files to net/icmpv6 with proper renaming and removal of IPv4 logic, (2) remove IPv6 logic from files in net/icmp, (3) copied include/nuttx/icmp.h to icmpv6.h and removed IPv4 specific logic, (4) removed all IPv6 logic from icmp.h, (5) IP_HDRLEN became IPv4_HDRLEN and IPv6_HDRLEN, (6) ip_chksum() became ipv4_chksum() and ipv6_chksum(), and (7) added partial support for ICMPv6 statistics. 2015-01-14 16:10:38 -06:00