chao an
34d2cde8a8
net/l2/l3/l4: add support of iob offload
...
1. Add new config CONFIG_NET_LL_GUARDSIZE to isolation of l2 stack,
which will benefit l3(IP) layer for multi-MAC(l2) implementation,
especially in some NICs such as celluler net driver.
new configuration options: CONFIG_NET_LL_GUARDSIZE
CONFIG_NET_LL_GUARDSIZE will reserved l2 buffer header size of
network buffer to isolate the L2/L3 (MAC/IP) data on network layer,
which will be beneficial to L3 network layer protocol transparent
transmission and forwarding
------------------------------------------------------------
Layout of frist iob entry:
iob_data (aligned by CONFIG_IOB_ALIGNMENT)
|
| io_offset(CONFIG_NET_LL_GUARDSIZE)
| |
-------------------------------------------------
iob | Reserved | io_len |
-------------------------------------------------
-------------------------------------------------------------
Layout of different NICs implementation:
iob_data (aligned by CONFIG_IOB_ALIGNMENT)
|
| io_offset(CONFIG_NET_LL_GUARDSIZE)
| |
-------------------------------------------------
Ethernet | Reserved | ETH_HDRLEN | io_len |
---------------------------------|---------------
8021Q | Reserved | ETH_8021Q_HDRLEN | io_len |
---------------------------------|---------------
ipforward | Reserved | io_len |
-------------------------------------------------
--------------------------------------------------------------------
2. Support iob offload to l2 driver to avoid unnecessary memory copy
Support send/receive iob vectors directly between the NICs and l3/l4
stack to avoid unnecessary memory copies, especially on hardware that
supports Scatter/gather, which can greatly improve performance.
new interface to support iob offload:
------------------------------------------
| IOB version | original |
|----------------------------------------|
| devif_iob_poll() | devif_poll() |
| ... | ... |
------------------------------------------
--------------------------------------------------------------------
1> NIC hardware support Scatter/gather transfer
TX:
tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
/ \
/ \
devif_poll_[l3|l4]_connections() devif_iob_send() (nocopy:udp/icmp/...)
/ \ (copy:tcp)
/ \
devif_iob_poll("NIC"_txpoll) callback() // "NIC"_txpoll
|
dev->d_iob: |
--------------- ---------------
io_data iob1 | | | iob3 | | |
\ --------------- ---------------
--------------- | --------------- |
iob0 | | | | iob2 | | | |
--------------- | --------------- |
\ | / /
\ | / /
----------------------------------------------
NICs io vector | | | | | | | | | |
----------------------------------------------
RX:
[tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
|
|
[tcp|udp|icmp|...]_ipv[4|6]_in()/...
|
|
pkt/ipv[4/6]_input()/...
|
|
NICs io vector receive(iov_base to each iobs)
--------------------------------------------------------------------
2> CONFIG_IOB_BUFSIZE is greater than MTU:
TX:
"(CONFIG_IOB_BUFSIZE) > (MAX_NETDEV_PKTSIZE + CONFIG_NET_GUARDSIZE + CONFIG_NET_LL_GUARDSIZE)"
tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
/ \
/ \
devif_poll_[l3|l4]_connections() devif_iob_send() (nocopy:udp/icmp/...)
/ \ (copy:tcp)
/ \
devif_iob_poll("NIC"_txpoll) callback() // "NIC"_txpoll
|
"NIC"_send()
(dev->d_iob->io_data[CONFIG_NET_LL_GUARDSIZE - NET_LL_HDRLEN(dev)])
RX:
[tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
|
|
[tcp|udp|icmp|...]_ipv[4|6]_in()/...
|
|
pkt/ipv[4/6]_input()/...
|
|
NICs io vector receive(iov_base to io_data)
--------------------------------------------------------------------
3> Compatible with all old flat buffer NICs
TX:
tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
/ \
/ \
devif_poll_[l3|l4]_connections() devif_iob_send() (nocopy:udp/icmp/...)
/ \ (copy:tcp)
/ \
devif_iob_poll(devif_poll_callback()) devif_poll_callback() /* new interface, gather iobs to flat buffer */
/ \
/ \
devif_poll("NIC"_txpoll) "NIC"_send()(dev->d_buf)
RX:
[tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
|
|
[tcp|udp|icmp|...]_ipv[4|6]_in()/...
|
|
netdev_input() /* new interface, Scatter/gather flat/iob buffer */
|
|
pkt/ipv[4|6]_input()/...
|
|
NICs io vector receive(Orignal flat buffer)
3. Iperf passthrough on NuttX simulator:
-------------------------------------------------
| Protocol | Server | Client | |
|-----------------------------------------------|
| TCP | 813 | 834 | Mbits/sec |
| TCP(Offload) | 1720 | 1100 | Mbits/sec |
| UDP | 22 | 757 | Mbits/sec |
| UDP(Offload) | 25 | 1250 | Mbits/sec |
-------------------------------------------------
Signed-off-by: chao an <anchao@xiaomi.com>
2022-12-03 11:47:04 +08:00
chao an
a8d3286258
net: move device buffer define to common header
...
Signed-off-by: chao an <anchao@xiaomi.com>
2022-10-28 00:32:16 -04:00
zhanghongyu
9bff29d7e7
udp: add IPVx_PKTINFO related support
...
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
2022-09-07 10:49:47 +08:00
chao.an
162fcd10ca
net: cleanup pvconn reference to avoid confuse
...
More reference:
https://github.com/apache/incubator-nuttx/pull/5252
https://github.com/apache/incubator-nuttx/pull/5434
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-08-26 20:58:11 +08:00
Xiang Xiao
ba9486de4a
iob: Remove iob_user_e enum and related code
...
since it is impossible to track producer and consumer
correctly if TCP/IP stack pass IOB directly to netdev
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-08-15 08:41:20 +03:00
chao.an
2026450333
net/udp: replace the common connect prologue
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-02-10 15:04:33 -03:00
chao.an
b901f22c27
net/socket: add SO_RCVBUF support
...
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-07-06 01:44:55 -05:00
Alin Jerpelea
37d5c1b0d9
net: Author Gregory Nutt: update licenses to Apache
...
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-02-20 00:38:18 -08:00
patacongo
861efdf8a3
net/: Whenever the network initializes an IPv4 address, it must clear sin_zero.
2020-02-25 15:53:39 +01:00
Xiang Xiao
346336bb9e
Make the read ahead buffer unselectable
...
Here is the email loop talk about why it is better to remove the option:
https://groups.google.com/forum/#!topic/nuttx/AaNkS7oU6R0
Change-Id: Ib66c037752149ad4b2787ef447f966c77aa12aad
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-01-11 08:24:49 -06:00
Xiang Xiao
6a3c2aded6
Fix wait loop and void cast ( #24 )
...
* Simplify EINTR/ECANCEL error handling
1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx
* Unify the void cast usage
1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
2020-01-02 10:54:43 -06:00
Xiang Xiao
90c52e6f8f
Squashed commit of the following:
...
Author: Gregory Nutt <gnutt@nuttx.org>
Run all .h and .c files modified in last PR through nxstyle.
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Net cleanup (#17 )
* Fix the semaphore usage issue found in tcp/udp
1. The count semaphore need disable priority inheritance
2. Loop again if net_lockedwait return -EINTR
3. Call nxsem_trywait to avoid the race condition
4. Call nxsem_post instead of sem_post
* Put the work notifier into free list to avoid the heap fragment in the long run. Since the allocation strategy is encapsulated internally, we can even refine the implementation later.
* Network stack shouldn't allocate memory in the poll implementation to avoid the heap fragment in the long run, other modification include:
1. Select MM_IOB automatically since ICMP[v6] socket can't work without the read ahead buffer
2. Remove the net lock since xxx_callback_free already do the same thing
3. TCP/UDP poll should work even the read ahead buffer isn't enabled at all
* Add NET_ prefix for UDP_NOTIFIER and TCP_NOTIFIER option to align with other UDP/TCP option convention
* Remove the unused _SF_[IDLE|ACCEPT|SEND|RECV|MASK] flags since there are code to set/clear these flags, but nobody check them.
2019-12-31 09:26:14 -06:00
Gregory Nutt
3b275fcf4e
net/: Run nxstyle against all C files.
2019-10-25 11:31:42 -06:00
Anthony Merlino
70404ed0dc
Merged in antmerlino/nuttx/iobinstrumentation (pull request #1001 )
...
Iobinstrumentation
* mm/iob: Introduces producer/consumer id to every iob call. This is so that the calls can be instrumented to monitor the IOB resources.
* iob instrumentation - Merges producer/consumer enumeration for simpler IOB user.
* fs/procfs: Starts adding support for /proc/iobinfo
* fs/procfs: Finishes first pass of simple IOB user stastics and /proc/iobinfo entry
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-16 22:42:25 +00:00
Gregory Nutt
de5a6163d5
This commit implements a proper version of SO_LINGER. Not sufficiently tested on initial commit.
...
Squashed commit of the following:
net/: Fix some naming inconsistencies, Fix final compilation issies.
net/inet/inet_close(): Now that we have logic to drain the buffered TX data, we can implement a proper lingering close.
net/inet,tcp,udp: Add functions to wait for write buffers to drain.
net/udp: Add support for notification when the UDP write buffer becomes empty.
net/tcp: Add support for notification when the TCP write buffer becomes empty.
2019-07-01 12:25:32 -06:00
Gregory Nutt
ee9e8c6bc2
udp\udp_callback.c: Fix another C89 compatibility problem. Empty initializers are not permitted. Caused ez80 build failure.
2019-06-03 09:23:19 -06:00
anchao
a418b63e07
net/udp/udp_callback.c: Initialize address structure to avoid random values in padding.
2019-03-19 09:49:54 -06:00
Gregory Nutt
28f73bd928
net/tcp and udp: Add logic to signal events when TCP or UDP read-ahead data is buffered.
...
Squashed commit of the following:
net/tcp: Add signal notification for the case when UDP read-ahead data is buffered. This is basically of clone of the TCP notification logic with naming adapted for UDP.
net/tcp: Add signal notification for the case when TCP read-ahead data is buffered.
2018-09-09 09:21:39 -06:00
Gregory Nutt
8ffb103adb
networking: IGMP: Remove special support for interrupt level processing (there is none) and fix some timer cancellation logic. In many files, correct comments. There is no interrupt level processing in the networking layer.
2017-09-02 10:27:03 -06:00
Gregory Nutt
d5207efb5a
Be consistent... Use Name: consistent in function headers vs Function:
2017-04-21 16:33:14 -06:00
Gregory Nutt
bfb93338f6
Move net/iob to drivers/iob so that the I/O buffering feature can be available to other drivers when networking is disabled.
2017-04-20 16:08:49 -06:00
Gregory Nutt
2a751068e6
Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err().
2016-06-20 12:44:38 -06:00
Gregory Nutt
43eb04bb8f
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
2016-06-20 11:59:15 -06:00
Gregory Nutt
e99301d7c2
Rename *lldbg to *llerr
2016-06-11 14:55:27 -06:00
Gregory Nutt
fc3540cffe
Replace all occurrences of vdbg with vinfo
2016-06-11 11:59:51 -06:00
Gregory Nutt
8db55f6493
Back out most of previous commit
2016-02-26 06:45:37 -06:00
Gregory Nutt
b0ea870bcc
Remove some empty code section comments
2016-02-25 18:34:36 -06:00
Gregory Nutt
0b441ff1f4
net/: Add basic IEEE 802.15-4 socket support
2016-02-25 14:01:22 -06:00
Gregory Nutt
6209c51206
net/: More clean-up of spacing/alignment issues
2015-10-08 15:10:04 -06:00
Max Neklyudov
7d04104485
Networking: Allow receipt of empty UDP packets. From Max Neklyudov
2015-08-11 08:34:16 -06:00
Gregory Nutt
e81f279315
Networking: Modify event list handling: Now there are two event lists each device structure: (1) One is for ARP and ICMP data related evetns, the other is for device related events. Callback allocation/free routines no accept a device paramter as well as a list: If the device paramter is added, then the callback goes into both the connection-related liast AND the device event list. Thus each socket type can received both custom data-related events as well as common device related events.
2015-05-28 12:01:38 -06:00
Gregory Nutt
b94321cfb4
Extend device specific callbacks to ICMPv6 and ARP. Fix some IPv6 compilation errors that have crept in
2015-05-27 11:39:44 -06:00
Gregory Nutt
db741dd695
Move some useful internal logic from recvfrom.c and udp_callback.c and put them in ip.h where they can be used more generally
2015-02-17 07:37:44 -06:00
Gregory Nutt
eb8f5e548f
Purely cosmetic changes resulting from last review IPv6 UDP change
2015-02-16 15:23:02 -06:00
Gregory Nutt
3f5ff4b210
IPv4 mapping to IPv6 implementation. Just for UDP. From Macs Neklyudov
2015-02-16 14:33:58 -06:00
Gregory Nutt
4ce94a7e95
IPv6: Eliminate a warning from UDP code
2015-02-02 11:37:22 -06:00
Gregory Nutt
a76b87305a
Networking: Should fix a few compile errors/warnings reported by Travis
2015-01-30 08:54:40 -06:00
Gregory Nutt
ccc72edc0b
Networking: Add UDP read-ahead support and support for poll/select on UDP sockets. From Macs N.
2015-01-30 06:08:26 -06:00
Gregory Nutt
0bb153b8cb
Remove all inclusion of uip.h
2014-07-04 16:58:22 -06:00
Gregory Nutt
8e706eb4ff
Rename many functions in net/devif from uip_* to devif_*
2014-06-28 18:36:09 -06:00
Gregory Nutt
5790c94ba3
Rename net/uip to net/devif. Rename uip/uip.h to devif/devif.h
2014-06-28 18:07:02 -06:00
Gregory Nutt
fce2a79abd
Rename uip_driver_s net_driver_s
2014-06-27 16:48:12 -06:00
Gregory Nutt
e1091251e6
NET: Move statistcs from uip.h to new netstats.h to remove nasty circular inclusion problem.
2014-06-26 09:32:39 -06:00
Gregory Nutt
abf04708ce
Clean up all UDP-related naming
2014-06-24 18:55:01 -06:00
Gregory Nutt
5d1f8180d4
Move the remaining files from include/nuttx/net/uip to include/nuttx/net; Rename *_internal.h header files in net/ to just *.h
2014-06-24 10:14:15 -06:00
Gregory Nutt
37646044ac
Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/netdev.h
2014-06-24 09:28:44 -06:00
Gregory Nutt
626469e30c
Move include/nuttx/net/uipopt.h to include/nuttx/net/netconfig.h
2014-06-24 08:53:28 -06:00
Gregory Nutt
382920b9a9
Move UDP files from net/uip to net/udp
2014-06-18 10:50:09 -06:00