Gregory Nutt
c790450ba2
Remove CONFIG_ARCH_CALIBRATION. It is awkward to use and no longer necessary now that we have apps/examples/calib_udelay.
2018-08-19 10:06:36 -06:00
Gregory Nutt
500d2c2289
arch/arm/src/lpc11,lpc17,lpc43,stm32,stm32l4: Fix scope of naming. CONFIG_CAN_TSEG1->CONFIG_LPC17_CAN_TSEG, for example.
2018-06-28 15:44:42 -06:00
Gregory Nutt
45cdc3a3d0
arch/arm/src/lpc11,lpc17,stm32,stm32l4: Fix scopy of nameing. CONFIG_CANx_BAUD->CONFIG_LPC17_CANx_BAUD, for example.
2018-06-28 14:47:14 -06:00
Gregory Nutt
8bd9cfe038
Squashed commit of the following:
...
arch/arm: Remove support for CONFIG_ARMV7M_CMNVECTOR. It is now the only vector support available. Also remove CONFIG_HAVE_CMNVECTOR. That no longer signifies anything."
arch/arm/src/stm32: This commit removes support for the dedicated vector handling from the STM32 architecture support. Only common vectors are now supported.
2018-06-20 12:30:37 -06:00
Gregory Nutt
e4922ed9f0
Remove instructures to CD to tools/ before running ./configure.sh
...
Squashed commit of the following:
configs/*/README.txt: Replace each occurrence of './configure.sh' with 'tools/configure.sh'
configs/*/README.txt: Remove 'cd ..' after each './configure.sh'
configs/*/README.txt: Remove 'cd -' after each './configure.sh'
configs/*/README.txt: Remove 'cd tools' before each './configure.sh'
configs/README.txt: Remove instruction to CD tools/ before running configure.sh.
2018-05-09 11:41:46 -06:00
Gregory Nutt
43a221f308
configs: Remove some old, redundant, obsolete boilerplate regarding toolchains that has been cloned into most of the board README files.
2017-11-26 11:36:03 -06:00
Gregory Nutt
9aac1dd44d
configs: Remove all setenv.bat files. Remove all references to setenv.sh and setenv.bat from all config README files.
2017-04-26 10:12:13 -06:00
Gregory Nutt
3dbdb3bb31
CONFIG_SDIO_DMA: Was been defined in several low-level architecute Kconfig files, but used at the highest levels in the code. Both are bad and both are fixed with this commit
2017-01-31 11:52:00 -06:00
Gregory Nutt
9ac00a355f
Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots.
2017-01-31 09:16:01 -06:00
Gregory Nutt
7c34a77b54
Move apps/system/usbmonitor to nuttx/drivers/usbmonitor
2016-06-30 12:24:33 -06:00
Gregory Nutt
5b2aa7bf99
Remove all traces of CONFIG_SYSLOG
2016-06-19 13:59:43 -06:00
Gregory Nutt
63b1eb09e6
Centralize definitions associated with CONFIG_DEBUG_CAN
2016-06-15 15:45:27 -06:00
Gregory Nutt
1cdc746726
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
2016-06-11 14:14:08 -06:00
Gregory Nutt
3e0efd7279
Fix all URLs to the NuttX repository
2016-04-06 17:56:40 -06:00
Gregory Nutt
e46cd30c14
Change use of mknulldeps.sh to mkwindeps.sh
2016-01-09 14:13:44 -06:00
Gregory Nutt
9e99cfa4e0
Correct many bitbucket.org URLs
2015-06-28 09:14:52 -06:00
Gregory Nutt
7214e52fb2
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
2015-06-28 08:08:57 -06:00
Gregory Nutt
46bd0bc307
This cleans up most of the remaining SourceForge references
2015-06-26 18:13:20 -06:00
Gregory Nutt
51950d7850
Undefine IRQPRIO in all configurations it should not be set
2014-04-16 08:29:39 -06:00
Gregory Nutt
5317d78c41
Use common naming for rest of the toolchains too
2014-03-05 16:29:58 -06:00
Gregory Nutt
d7d856e504
Use common naming for all buildroot toolchains
2014-03-05 15:37:07 -06:00
Gregory Nutt
3129b1c507
Updated README file
2014-02-10 12:37:40 -06:00
Gregory Nutt
f19af5572d
Fix all occurrences of "the the" in documentation and comments
2013-08-27 09:40:19 -06:00
Gregory Nutt
efded598fd
Finally... renamed all CONFIG_DRAM_ settings to CONFIG_RAM_
2013-07-26 10:09:17 -06:00
Gregory Nutt
581e409c37
Add support for the UG-2843HHSWEG04 OLED and for the SAM4L Xplained Pro OLED module that uses that OLED.
2013-06-23 14:39:56 -06:00
Gregory Nutt
627eebdd4b
Add kernel build support and a kernel most OS test example for the Mikroe STM32 M4 board. From Ken Pettit
2013-05-17 14:59:21 -06:00
Gregory Nutt
9a25b51c8f
configs/mikroe-stm32f4: Add new configurations plus support for the MIO283QT2 display from Ken Pettit
2013-05-07 14:34:09 -06:00
Gregory Nutt
5de300ffc2
Rearchitecting of some MTD, partition, SMART interfaces, and FLASH drivers to: Better use the byte write capbility when available and to use smaller erase sectors for the erase sector size when available).
2013-05-03 12:52:33 -06:00
Gregory Nutt
785517272f
Add support for the MikroElektronika Mikromedia for STM32F4 development board. From Ken Petit
2013-04-30 18:31:47 -06:00
Gregory Nutt
62bc4fb9b9
Add support for the MikroElektronika Mikromedia for STM32F4 development board. From Ken Petit
2013-04-30 18:28:10 -06:00
