Gregory Nutt
b5a4d6d9ef
configs/freedom-k28f: With these changes to the configuration, the NSH configuration is now functional on the k28f board. Also fixes corrects the active logic level for the RGB LED. arch/arm/src/kinetis/chip: Fixes an error in vector configuration.
2018-05-05 09:33:48 -06:00
Gregory Nutt
0de294a586
Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they.
2017-05-11 13:35:56 -06:00
Sebastien Lorquet
abc8322728
more kinetis
2017-04-28 18:31:10 +02:00
Gregory Nutt
77f980e676
Buttons: Correct some comments left after last button-related change: 32- vs 8-bit bit set.
2017-04-09 14:44:49 -06:00
Gregory Nutt
f9e402018b
Buttons: Change return value of board_buttons() and the type of btn_buttonset_t to uint32_t so that more than 8 buttons can be supported.
2017-04-09 07:22:49 -06:00
Gregory Nutt
4c82827ab1
board_button_irq: Button IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 14:37:22 -06:00
Gregory Nutt
34a2839244
Kinetis GPIO: Pin IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 11:33:03 -06:00
Gregory Nutt
67de2e5f66
Add argument to STM32 EXTI interrupt handlers.
2017-02-27 14:21:30 -06:00
Gregory Nutt
6e2ee2b07f
Kinetis: GPIO interrupt handling needs handler argument.
2017-02-27 07:20:21 -06:00
David Sidrane
3840c802d1
Kinetis SPI and I2C are 0 based
...
The K whole family line has max 4 or each. But the supported
parts have the maximums listed below:
K46 and K66 3 SPI SPI0-SPI2
K46 and K66 4 I2C I2C0-I2C3
2017-02-13 13:24:47 -10:00
Gregory Nutt
5386403476
Rename Kinetis version of CONFIG_GPIO_IRQ to CONFIG_KINETIS_GPIOIRQ
2016-07-22 14:30:37 -06:00
Gregory Nutt
43eb04bb8f
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
2016-06-20 11:59:15 -06:00
Gregory Nutt
2ddd57c674
Centralize definitions associated with CONFIG_DEBUG_LEDS
2016-06-15 14:12:19 -06:00
Gregory Nutt
ba03134bed
Centralize definitions associated with CONFIG_DEBUG_SPI
2016-06-15 10:41:13 -06:00
Gregory Nutt
a5457987d8
configs/: Change some err() ERRORS to warn() WARNINGS or info()
2016-06-12 17:02:46 -06:00
Gregory Nutt
a1469a3e95
Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()
2016-06-11 15:50:49 -06:00
Gregory Nutt
e99301d7c2
Rename *lldbg to *llerr
2016-06-11 14:55:27 -06:00
Gregory Nutt
1cdc746726
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
2016-06-11 14:14:08 -06:00
Gregory Nutt
fc3540cffe
Replace all occurrences of vdbg with vinfo
2016-06-11 11:59:51 -06:00
Gregory Nutt
3a74a438d9
Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO
2016-06-11 11:50:18 -06:00
Gregory Nutt
4b3e710af6
Add an argument to board_app_initialize()
2016-05-24 10:51:22 -06:00
Gregory Nutt
0334d4b4cd
Rename usbmsc_archinitialize to board_usbmsc_initialize
2016-03-25 12:09:37 -06:00
Gregory Nutt
9ed7d56a18
Building of xyz_appinit.c should depend on CONFIG_LIB_BOARDCTL, not CONFIG_NSH_ARCHINITIALIZE
2016-02-04 12:14:17 -06:00
Gregory Nutt
36bb11d77c
Rename files containing board_app_initialize from xyz_nsh.c to xyz_appinit.c
2016-02-04 12:03:09 -06:00
Gregory Nutt
54730e55db
For Kinetis MCUs, rename up_spiinitialize to kinetis_spibus_initialize
2016-01-26 16:25:44 -06:00
Gregory Nutt
8eab9280d8
Rename all architecture files of form xyz_internal.h to just xyz.h
2015-12-29 18:07:27 -06:00
Gregory Nutt
6daa73a945
Remove internal from name of all board header files
2015-12-29 15:44:56 -06:00
Gregory Nutt
893bd9c7b5
Rename board_led_off to board_autoled_off
2015-11-01 09:10:08 -06:00
Gregory Nutt
78f19bbefb
Rename board_led_on to board_autoled_on
2015-11-01 09:07:36 -06:00
Gregory Nutt
88c506d843
Rename board_led_initialize to board_autoled_initiaize
2015-11-01 09:03:01 -06:00
Gregory Nutt
37111e6b2c
Eliminate warnings
2015-09-08 10:19:34 -06:00
Paul A. Patience
55d8aee826
Simplify configs/ Makefiles by combining common longic into a new board.mk Makefile fragment. For Paul A. Patience"
2015-09-04 16:42:34 -06:00
Gregory Nutt
49415e7cc8
Two r's and only two r's in the word interrupt
2015-04-23 14:04:43 -06:00
Gregory Nutt
103a17d4f1
Rename arch_nshinitialize() to board_app_initialize()
2015-03-31 10:21:31 -06:00
Gregory Nutt
fbc85d5b12
TWR-K60N512: Rename files for better conformance to naming conventions
2015-03-21 13:52:45 -06:00
Gregory Nutt
7583c94252
Move board_ prototypes from arch.h to board.h
2015-02-27 20:02:03 -06:00
Gregory Nutt
42327117a3
configs/: board function prototypes are now in include/nuttx/board.h. Remove from board header file; Add inclusion of nuttx/board.h to all files referencing board functions
2015-02-27 18:49:24 -06:00
Gregory Nutt
00a4b1f6d6
configs/: Remove prototypes of board_led* functions from all board header files
2015-02-27 17:32:01 -06:00
Gregory Nutt
a9fa023ae1
All USB MSC-related files under nuttx/configs changed to use the corrected syslog interfaces
2014-10-08 14:59:10 -06:00
Gregory Nutt
4d851b150d
All NSH-related files under nuttx/configs changed to use the corrected syslog interfaces
2014-10-08 14:28:55 -06:00
Gregory Nutt
ab5b37189b
More trailing whilespace removal
2014-04-13 16:22:22 -06:00
Gregory Nutt
1d6c14e742
Many changes to reduce complaints from CppCheck. Several latent bugs fixes, but probably some new typos introduced
2014-02-10 18:08:49 -06:00
Gregory Nutt
42a86a9cba
rename up_led*() functions to board_led_*()
2014-01-24 14:28:49 -06:00
Gregory Nutt
f797601f19
Rename up_irqbutton() to board_button_irq()
2014-01-24 14:04:07 -06:00
Gregory Nutt
f4d84ecd7e
Rename up_buttons() to board_buttons()
2014-01-24 13:59:24 -06:00
Gregory Nutt
e5bfdcf36c
Rename up_buttoninit to board_button_intialize
2014-01-24 13:50:23 -06:00
Gregory Nutt
024cb72187
Move apps/examples/usbmsc to apps/system/usbmsc
2013-09-25 16:54:39 -06:00
Gregory Nutt
17810f3e6f
Created new directories to hold SPI-related files
2013-07-01 08:11:54 -06:00
Gregory Nutt
9ab85d01ef
Remove CONFIG_XYZ_BUILTIN configurations, replace with the single CONFIG_NSH_BUILTIN_APPS. Add SAM3/4 sam_periphclks.h which is just a header file that includes the right header file. Misc SAM3U-EK cleanup
2013-06-12 17:32:00 -06:00
Gregory Nutt
0906d557c3
.dSYM only needs to be in the same .gitignore files as .exe
2013-05-30 15:02:04 -06:00