1. Add missing conditional logic in include/sys/syscall_lookup.h
2. CONFIG_NPTHREAD_KEYS removed from code but was still in sched/Kconfig
3. Refresh all configurations affected by PR 1007
4. syscall/syscall_funclookup.c needs to include nuttx/tls.h
1. Move pthread-specific data files from sched/pthread/ to libs/libc/pthread.
2. Remove pthread-specific data functions from syscalls.
3. Implement tls_alloc() and tls_free() with system calls.
4. Reimplement pthread_key_create() and pthread_key_free() using tls_alloc() and tls_free().
5. Reimplement pthread_set_specific() and pthread_get_specicif() using tls_set_value() and tls_get_value()
Modified boards/z80/z180/p112/README.txt and boards/z80/z80/z80sim/README.txt:
IMPORTANT NOTE as of 2020-4-11: Support for CONFIG_CAN_PASS_STRUCTS was removed in NuttX-9.1. This was necessary to enforce some POSIX interface compliance but also means that ALL older SDCC versions will no long build with NuttX. I have been told that the newest SDCC compilers can indeed pass structure and union parameters and return values. If that is correct, then perhaps the newer SDCC compilers will be used. Otherwise, it will be necessary to use some other, more compliant compiler.
So call 'make EXTRAFLAGS=-Wno-cpp' could suppress the warnings with pre-processor
directive #warning in GCC.
Change-Id: Iaa618238924c9969bf91db22117b39e6d2fc9bb6
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
boards/z80/ez80/z20x/configs/w25boot/defconfig: Increase size of serial Tx buffer.
boards/z80/ez80/z20x/src/w25_main.c: Add some fflush() in necessary places. Greatly improves the usability of the UI.
boards/z80/ez80/z20x/README.txt: Trival update to README
drivers/serial/serial.c and tcdrain.c: Correct some typos.
- boards/z80/ez80/z20x/scripts/z20x_*.linkcmd: Reduce from 4 to 1 wait state. That i sufficient because of the slow clocking of the eZ80F92
- boards/z80/ez80/z20x/src/w25_main.c: Replace CRC algorithm with simple, less time consuming check sum.
- boards/z80/ez80/z20x/configs/nsh: Rename the nsh_ram configuration to just nsh
- boards/z80/ez80/z80x/configs/hello: Add simpler program to make debugging the loader easier.
arch/z80/src/ez80/ez80_timerisr.c: Correct a mismatch between the programmed reload value and the timer input clock frequency.
arch/z80/src/ez80/ez80f92.h: Correct error in timer input clock divider: Bits 2-3, not bits 3-4.
boards/z80/ez80/z20x/src/w25_main.c: Correct an uninitialized return value; private function was not declard static.
boards/z80/ez80/z20x/src/w25_main.c: (1) Correct size comparison typo: Should have been >= not != (2) Fix sizeof(): Was ugetting the sizeof the pointer instead of the sizeof the pointed at structure. (3) Improve some comments.
boards/z80/ez80/z20x: Increase RX buffer size to 4Kb, reduce BAUD to 2400 in w25boot configuration
arch/z80/src/ez80/ez80_serial.c: Reduce Rx FIFO trigger level for eZ80F92 to 1 so that will respond more quickly to incoming data.
boards/z80/ez80/z20x/src/w25_main.c: Improve user interface.
There is still an error occurring while downloading Intex HEX files to FLASH. That is unrelated to this and appears to be a problem libs/libc/hex2gbin/lib_hex2bin.c
arch/z80/src/ez80/ez80_timerisr.c: Fix an error that looks the file got damaged by a bad keystroke in the editor while a string was highlighted.
boards/z80/ez80/z20x/src/ez80_spi.c: Fix some bad conditional compilationi. Prevented W25 chip select from being initialized.
Commit 797e45d6bf attempted to reduce the frequency of SPI reconfiguration by keeping track of the current frequency and mode settings and changing these settings only when the new settings differ from the old settings.
However, the original commit neglected to save the new frequency setting and, hence, was not effective in what it was trying to do: Every time the SPI setfrequency() method was called, it still looked like a new frequency and the frequency was still reconfigured, even though it hadn't really changed.
arch/z80/src/ez80/ez80_spi.c: Do not configure SPI chip select pin. It is not used by the driver and configuring it just clobbers other usage of that pin. Add some additional debug outputs; correct some exiting debug outputs.
drivers/mtd/w25.c: Add some debug output.
boards/z80/ez80/z20x/src/ez80_w25.c: Correct SPI bus number used in initialization. Only SPI1 is supported.
arch/z80/src/ez80/ez80_timerisr.c: Some initial timer configuration fixes.
* tools/Config.mk - Add empty definition POSTBUILD
* tools/Makefile.unix/win - Replace CXD56xx specific logic with $(call POSTBUILD)
* boards/arm/cxd56xx/scripts/Config.mk - Add POSTBUILD definitions with logic removed from Makefile.unix/win
* boards/arm/cxd56xx/spresense/scripts/Make.defs - Include the CXD56xx Config.mk immediately after tools/Config.mk so that the empty POSTBUILD definition will be replaced with the correct one
NOTE: There is a precedent for this approach. This is the way that other architecture-specific build options are implemented. See, for example, tools/zds/Config.mk
arch/z80/: include/ez80/irq.h, src/ez80/ez80f92_*.asm: Correct some comments related to vector address offsets.
boards/z80/ez80/z20x/scripts/z20x_loader.linkcmd: Fix RAM offset in linker script
Kconfig files. Repartition some functionality. Bootloader support will need to be provided in logic under arch/z80/src/ez80 so the critical configuration selections were moved the Kconfig file there.
arch/z80/src/ez80/ez80_i2c.h: Rename arch/z80/src/ez80/ez80f91_i2c.h. It is sharable by both ez80f91 and ez80f92.
arch/z80/src/ez80/: Add logic to perform an additional level of interrupt redirection. This is necessary because the the interrupt handling is part of the loader FLASH-based logic. In order to share interrupts with the program loaded into RAM by the loader, another layer or redirection is required to get control to the interrupt handlers in the loaded program. See ez809f2_loader.asm and ez80f92_program.asm
boards/z80/ez80/z20x/scripts: Reduce size of the interrupt re-direction buffer from 1Kb to 512b.
The SD boot loader was not satisfactory because 1) the SD slot is on an optional board and, hence, cannot be part of a fundamental solution. And 2) it is too big.
The only storage on borard is the Winbond W25 SPI-bsed FLASH. This commit adds support for a bootload to 1) read code in HEX format from a serial port and write it to the W25 FLASH, or 2) read code in binary form from the W25 FLASH into SRAM and execute the loaded program.
boards/z80/ez80/z20x/configs: Added w25boot configuration
boards/z80/ez80/z20x/src: Add bootloader logic, w25_main.c. Add logic to manage shared SRAM memory map so that the loaded program does not clobber the bootloader memory. Add logic to recover the bootloader memory into the heap after the loaded program as started.
boards/z80/ez80/z20x/scripts: Rework scripts and configuration to support a bootloader and program build. The boolloader cannot use all of SRAM; the program must not clobber the SRAM region used by the bootloader.
board/z80/ez80/*/scripts/Make.defs: Fix optimization definition use in assembly flags. It was using the compiler optimization settings instead of the assembler optimization settings. Hence, enabling optimization would could cause assembler command line errors.
arch/z80/src/ez80/Toolchain.defs: Back out some work arounds. Now compiler optimization flags can again set set without assembler command line errors.
boards/z80/ez80/z20x/README.txt: Trivial update to size/optimization discussion.
The eZ80F92 interrupt controller is very different from the eZ80F91. The eZ80F91 has:
1. Four byte interrupt vectors
2. The vector base address register is 16-bit so the vector table can lie in RAM
Whereas the eZ80F92 has:
1. Two byte interrupt vectors
2. An 8-bit vector base address
This means that the vectors must lie in the first 16-bits of FLASH and there must be a "trampoline" to get to interrupt handlers outside of the first 64-Kb of FLASH.
arch/z80/src/ez80/Toolchain.defs: Correct some CFLAGS when optimization suppressed.
arch/z80/src/ez80/Kconfig arch/z80/src/ez80/ez80_emac.c: Remove configuration option for selecting EMAC RAM address. This is duplicated and possibly conflicting. The correct address for the RAM is provided in the linker command file. The RAM should be configured once and using this single definitions.
arch/z80/src/ez80/ez80_startup.asm and arch/z80/src/ez80/ez80f9*_init.asm. Move RAM and FLAH intialization out of MCU-specific logic to common start-up logic. We cannot call any functions until SRAM is initialized and the stack is properly initialized because the return address is stored on the stack. Use internal SRAM for the IDLE stack to avoid the chicken'n'egg problem.
boards/z80/ez80/z20x/configs/sdboot/sdboot.zdsproj: Discuss build environments.
arch/z80/src/ez80/Toolchain.defs: Update some CFLAGS to match CFLAGS from ZDS-II IDE. Apparently, we must say that the CPU is an eZ80F91 event when compiler for eZ80F92.
boards/z80/ez80/z20x: Update linker scripts.
* tools/zds/zds_Config.mk: Move boards/z80/ez80/scripts/eZ80_Config.mk to tools/zds/zds_Config.mk where it can be shared by other ZDS-II platforms.
* boards/z16/z16f: Duplicate changes for new ZDS-II support from ez80
* boards/z80/z8: Duplicate changes for new ZDS-II support from ez80
* arch/z16/src/z16f/Toolchain.defs: Create required Toolchain.defs file for Z16f
Eliminate the MOVEOBJ definition from tools/Config.mk, Makefiles, and other locations. The MOVEOBJ definition was used to work around the case where the object output of a compile or assemble is in a different directory than the source file. The ZDS-II tools have no command line option to perform this move; MOVEOBJ handled the move as a post-compiler operation.
MOVEOBJ is no longer needed because this the ez80 COMPILE and ASSEMBLE definitions now handle all of the object file movement cases.
tools/zds/zdsgen.c: Remove this program. It should have been a simpler way to manage ZDS-II compiler and assember differences. However, the compiler arguments needed to pass through too many layers of bash command line modifications and, as a result, it was not possible to retain quotes on critical strings. This approch was abandoned for an alternative approach.
boards/z80/ez80/scripts/eZ80_Config.mk: Add definitions to move the object files as necessary. This seems to work well and is implemented for both native and Cygwin Windows build -- but only for the Z20x.
tools/zds: A new tool sub-directory intended to hold tools for making life working with the ZDS-II toolchain less painful.
tools/zds/zdsar.c: This is a wrapper around the ZDS_II librarian. It simplifies the build scripts by replacing large sequences of complex Bash script that were added to the build files. Not only does this clean up the build files but it also improves performance and, more importantly, provides a common solution for the Windows native build case. This tool should work with all ZDS-II based platforms including z8, zNeo, and ez80.
tools/README.txt: Add a brief description about the zds sub-directory. Also re-ordered some tool descriptions. They are supposed to be in alphabetical order, but this seems to have fallen apart.
boards/z80/ez80/scripts/eZ80_Config.mk: Updated to use tools/zds/zdsar.exe.
This includes some fixes for the ez80 build including:
1. Ability to handle decorated object file names,
2. Ability to handle libraries described with absolute paths
This commit address only the POSIX build and needs to be updated
for the Windows native build.
arch/z80/arc/ez80/Toolchain.sh: Move more common toolchain definitions from Make.defs.
boards/z80/ez80/scripts/eZ80_Config.mk: Move common defines that override tools/Config.mk to this new file.
This does not solve the ez80 build problem yet but does assure that when the solution is in place, it will automatically apply to all present and future ez80 configurations.
to avoid shell complain that @echo can't find if the variable expand in the compound
command(e.g. ARLOCK) and remove $(Q) before $AR so the result is almost same as before.
Call xxx_timer_initialize from clock subsystem to make timer ready for use as soon as possiblei and revert the workaround:
commit 0863e771a9
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Apr 26 07:24:57 2019 -0600
Revert "sched/clock/clock_initialize.c: clock_inittime() needs to be done with CONFIG_SCHED_TICKLESS and clock_initialize should skip clock_inittime() for external RTC case since the RTC isn't ready yet."
This reverts commit 2bc709d4b9.
Commit 2bc709d4b9 was intended to handle the case where up_timer_gettime may not start from zero case. However, this change has the side-effect of breaking every implementation of tickless mode: After this change the tickless timer structures are used before they are initialized in clock_inittime(). Initialization happens later when up_initialize is called() when arm_timer_initialize().
Since the tickless mode timer is very special, one solution might be to
1. Rename xxx_timer_initialize to up_timer_initialize
2 Move up_timer_initialize to include/nuttx/arch.h
3. Call it from clock subsystem instead up_initialize
Basically, this change make timer initialization almost same as rtc initialization(up_rtc_initialize).
For now, however, we just need to revert the change.
* Simplify EINTR/ECANCEL error handling
1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx
* Unify the void cast usage
1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
boards: add stub drivers folder for later use
* boards: add stub drivers folder for later use
The board/drivers folder is added for future use.
In this folder we should place drives that are platform specific and
depend on HW that is present only on a specific platform.
NOTE: All shared drivers should go to the regular driver folder
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* tools: shift BOARD_DIR one level up
In preparation for drivers and common folders we are moving the
BOARD_DIR path up one level.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* tools: add drivers/platform symlink
Link the boards/<arch>/<chip>/drivers dir to drivers/platform
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* drivers: add platform specifc drivers extension
There are platforms that use specific drivers and we should be able to
include those drivers in the build
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* board: cxd56xx: drivers: add AK09912 driver for SCU
This is a platform specific driver connected on the SCU unit.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
codestyle fixes
* misoc: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* or1k: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* renesas: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* risc-v: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sim: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* x86: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* xtensa: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z16: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z80: codestyle fixes
After the board restructuration is time for codestyle cleanup
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
group boards based on chip
* a1x: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* am335x: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* c5471: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* scx56xx: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* dm320: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* efm32: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* imx6: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* imxrt: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* kinetis: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* kl: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lc823450: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc17xx_40xx: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc214x: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc2378: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc31xx: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc43xx: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc54xx: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* max326xx: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* moxart: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nrf52: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nuc1xx: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam34: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sama5: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* samd2l2: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* samd5e5: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* samv7: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f0l0g0: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f7: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32h7: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32l4: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* str71x: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* tiva: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* tms570: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* xmc4: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* p112: typo fix
this boars is a z80 board and was moved to the wrong arch
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* avr: at32uc3: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* avr: at90usb: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* avr: atmega: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* hc: mcs92s12ne64: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mips: pic32mx: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mips: pic32mz: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* misoc: lm32: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* or1k: mor1kx: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* renesas: m32262f8: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* renesas: sh7032: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* risk-v: gap8: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* risk-v: nr5m100: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sim: sim: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* x86: qemu: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* xtensa: esp32: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z16: z16f2811: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z80: ez80: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z80: z180: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z80: z80: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z80: z8: group boards based on chip
All boards based on the same chip are moved to the same folder
following the arch layout <arch>/<chip>/<board>.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* tools: update tools for boards based on chip
This patch updates only the linux tools
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* pcduino-a10: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* beaglebone-black: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* c5471evm: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* spresense: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ntosd-dm320: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* efm32-g8xx-stk: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* efm32gg-stk3700: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-efm32g880f128-stk: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sabre-6quad: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* imxrt1050-evk: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* imxrt1060-evk: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* freedom-k28f: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* freedom-k64f: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* freedom-k66f: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* kwikstik-k40: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* teensy-3.x: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* twr-k60n512: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* twr-k64f120m: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* freedom-kl25z: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* freedom-kl26z: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* teensy-lc: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lc823450: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lincoln60: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4088-devkit: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4088-quickstart: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpcxpresso-lpc1768: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mbed: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mcb1700: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-lpc1766stk: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* open1788: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* pnev5180b: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* u-blox-c027: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* zkit-arm-1769: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mcu123-lpc214x: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* zp214xpa: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-lpc2378: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ea3131: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ea3152: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-lpc-h3131: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* bambino-200e: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4330-xplorer: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4337-ws: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4337-evb: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpc4370-link2: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lpcxpresso-lpc54628: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* max32660-evsys: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* moxa: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nrf52-generic: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nutiny-nuc120: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arduino-due: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* flipnclick-sam3x: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam3u-ek: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam4cmp-db: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam4e-ek: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam4l-xplained: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam4s-xplained: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sam4s-xplained-pro: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sama5d2-xult: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sama5d3-xplained: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sama5d3x-ek: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sama5d4-ek: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* samd20-xplained: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* samd21-xplained: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* saml21-xplained: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* metro-m4: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* same70-xplained: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* same71-xult: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* axoloti: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* clicker2-stm32: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* cloudctrl: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* fire-stm32v2: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* hymini-stm32v: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* maple: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mikroe-stm32f4: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f103rb: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f207zg: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f302r8: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f303re: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f303ze: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f334r8: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f410rb: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f446re: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f4x1re: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-1152re: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-e407: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-h405: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-h407: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-p107: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-p207: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32-p407: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-stm32: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* omnibusf4: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* photon: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* shenzou: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm3210e-eval: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm3220g-eval: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm3240g-eval: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32_tiny: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32butterfly2: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f103-minimum: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f334-disco: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f3discovery: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f411e-disco: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f429i-disco: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f4discovery: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32ldiscovery: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32vldiscovery: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* viewtool-stm32f107: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* b-l072z-lrwan1: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f072rb: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f091rc: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-f071rg: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l073rz: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f051-discovery: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f072-discovery: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-144: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f746-ws: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f746g-disco: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32f746g-disco: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-h743zi: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* b-l475e-iot01a: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l432kc: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l432re: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l476rg: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* nucleo-l496zg: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32l476-mdk: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32l476vg-disco: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* stm32l4r9ai-disco: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* olimex-strp711: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* dk-tm4c129x: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* eagle100: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* ekk-lm3s9b96: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* launchxl-cc1310: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* launchxl-cc1312r1: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lm3s6432-s2e: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lm3s6965-ek: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lm3s8962-ek: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lm4f120-launchpad: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lm4c123g-launchpad: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* lm4c1294-launchpad: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* launchxl-tms57004: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* tms570ls31x-usb-kit: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* xmc4500-relax: defconfig update
add ARCH_CHIP to defconfig
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* zp214xpa: typo fix
add missing tools/oocd.sh
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
group boards by architecture
* z80: group boards by architecture
all boards that share the same architecture are moved to the same arch
folder following the soc layout
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* z16: group boards by architecture
all boards that share the same architecture are moved to the same arch
folder following the soc layout
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* xtensa: group boards by architecture
all boards that share the same architecture are moved to the same arch
folder following the soc layout
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* x86: group boards by architecture
all boards that share the same architecture are moved to the same arch
folder following the soc layout
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* sim: group boards by architecture
all boards that share the same architecture are moved to the same arch
folder following the soc layout
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* risc-v: group boards by architecture
all boards that share the same architecture are moved to the same arch
folder following the soc layout
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* renesas: group boards by architecture
all boards that share the same architecture are moved to the same arch
folder following the soc layout
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* or1k: group boards by architecture
all boards that share the same architecture are moved to the same arch
folder following the soc layout
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* misoc: group boards by architecture
all boards that share the same architecture are moved to the same arch
folder following the soc layout
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* mips: group boards by architecture
all boards that share the same architecture are moved to the same arch
folder following the soc layout
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* hc: group boards by architecture
all boards that share the same architecture are moved to the same arch
folder following the soc layout
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* avr: group boards by architecture
all boards that share the same architecture are moved to the same arch
folder following the soc layout
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* arm: group boards by architecture
all boards that share the same architecture are moved to the same arch
folder following the soc layout
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
* boards: group boards by architecture
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
