sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
28,520 Commits 1 Branch 0 Tags 291 MiB
9b023049a2
Commit Graph

481 Commits

Author SHA1 Message Date
Gregory Nutt
86239d4a73 Experimental change to STM32 Ethernet driver a success. Porting change to all other Ethernet drivers. 2017-03-03 14:45:09 -06:00
Gregory Nutt
7d2d541c70 Adapt some drivers to utilize the IRQ argument feature. 2017-02-27 20:54:18 -06:00
Gregory Nutt
d9fec7fe4c More missing arguments to interrupt handling. 2017-02-27 14:26:04 -06:00
Gregory Nutt
a581e9206d Convert remaining serial drivers to use use irq_attach. 2017-02-27 10:27:14 -06:00
Mark Schulte
b3222bbc8a irq_dispatch: Add argument pointer to irq_dispatch 
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
 2017-02-27 06:27:56 -06:00
Wolfgang Reißnegger
774346ccdd SAM3/4: GPIO bit numbering typo fixes. 2017-02-26 09:54:04 -08:00
Gregory Nutt
8ee2e8d8b0 Most Ethernet drviers: Check if the poll timer is running before restarting it at the end of each TX. 2017-02-24 15:58:17 -06:00
Gregory Nutt
62a1f6f110 up_timer_initialize() is named incorrectly. The prefix should be the architecture name, not up_ since it is private to the architecture. up_timerisr() is similarly misnamed and should also be private since it is used only with the xyz_timerisr.c files. Also updat TODO list. 2017-02-07 10:35:04 -06:00
Gregory Nutt
3dbdb3bb31 CONFIG_SDIO_DMA: Was been defined in several low-level architecute Kconfig files, but used at the highest levels in the code. Both are bad and both are fixed with this commit 2017-01-31 11:52:00 -06:00
Gregory Nutt
2a4791f4ee Removed dmasupported() method from the SDIO interface. That is now a bit in the cpapability set. 2017-01-31 09:51:15 -06:00
Gregory Nutt
9ac00a355f Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots. 2017-01-31 09:16:01 -06:00
Gregory Nutt
ff61d8f69d Add missing sched_note_*() calls to sam4cm SMP functions. 2017-01-24 14:33:57 -06:00
Gregory Nutt
4a8c6a6d2d ELF: Move ARMv6-M, ARMv7-M, and legacy ARM versions of ELF relocation logic to libc/machine 2017-01-21 15:24:25 -06:00
Gregory Nutt
be5ba90d4f Move optimized ARM memcpy functions from arch/arm/src/ to libc/machine/. This is necessary for the PROTECTED and KERNEL build modes. Otherwise, memcpy() will be built in to kernel space and not accessible to applications. 2017-01-20 10:53:46 -06:00
Gregory Nutt
3c4684ef5f Eliminate CONFIG_ARCH_OPTIMIZED_FUNCTIONS. Move options to select architectur-specific C library options from libc/Kconfig to libc/machine/Kconfig and rename. 2017-01-20 09:30:07 -06:00
Wolfgang Reißnegger
a22dc9b1a8 SAM3/4: Add support for ATSAM4S4C. 2017-01-18 11:56:51 -08:00
Gregory Nutt
113d8bdcca Fix some SMP-related compilation errors 2016-12-09 17:10:59 -06:00
Gregory Nutt
a7b688e87b sched notes: Add additional note to see if/when CPU is started in SMP mode. 2016-12-07 09:08:20 -06:00
Masayuki Ishikawa
d92a7886a4 SAM3/4: Add SMP support for the dual-core SAM4CM 2016-12-04 07:23:31 -06:00
Gregory Nutt
7467329a98 Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed. 2016-12-03 16:28:19 -06:00
Gregory Nutt
934aded293 arch/: Adapt all Ethernet drivers to work as though CONFIG_NET_MULTIBUFFER were set. Remove all references to CONFIG_NET_MULTIBUFFER 2016-11-29 16:06:48 -06:00
Gregory Nutt
12f830ffd5 SAM3/4: Name of method is now setcallback, not sethandler 2016-11-22 12:06:07 -06:00
Gregory Nutt
0804286ad3 arch/: Add option to use low-priority work queue to all Ethernet drivers in arch that support CONFIG_NET_NOINTS. 2016-11-19 09:20:01 -06:00
Gregory Nutt
0db99b8c89 Trivial fix from review of last PR 2016-11-19 06:52:51 -06:00
Wolfgang Reißnegger
b23c1f8817 Typo fix in sam_udp.c 2016-11-18 17:23:22 -08:00
Wolfgang Reißnegger
d135246a7d SAM3/4: Remove 'stalled' flag in UDP driver. 
The flag is not necessary. The state of the endpoint can be determined
using 'epstate' instead.
 2016-11-18 17:23:21 -08:00
Wolfgang Reißnegger
9e349f4335 SAM3/4: Remove unused 'halted' flag in UDP driver. 2016-11-18 17:23:21 -08:00
Wolfgang Reißnegger
c7ef82c546 SAM3/4: Add delay between setting and clearing the endpoint RESET bit in sam_ep_resume(). 
We need to add a delay between setting and clearing the endpoint reset
bit in SAM_UDP_RSTEP. Without the delay the USB controller will (may?)
not reset the endpoint.

If the endpoint is not being reset, the Data Toggle (DTGLE) bit will
not to be cleared which will cause the next transaction to fail if
DTGLE is 1. If that happens the host will time-out and reset the bus.

Adding this delay may also fix the USBMSC_STALL_RACEWAR in
usbmsc_scsi.c, however this has not been verified yet.
 2016-11-18 17:23:21 -08:00
Gregory Nutt
19c1c9d78b All timer lower half drivers. Port Sebastien's changes to all all other implementations of the timer lower half. Very many just and untested. Expect some problems. 2016-11-17 15:03:31 -06:00
Gregory Nutt
bb6bfa633e arch: Disable priority inheritance on all semaphores used for signaling in all SD card drivers 2016-11-03 15:13:27 -06:00
Gregory Nutt
8b07aa6f7c arch: Disable priority inheritance on all semaphores used for signaling in all SPI drivers 2016-11-03 14:51:44 -06:00
Gregory Nutt
e1cd9febbf arch: Disable priority inheritance on all semaphores used for signaling in all I2C/TWI drivers 2016-11-03 14:23:42 -06:00
Frank Benkert
cf5fdf1f8f SAM Watchdog: Register the watchdog device at the configured device path CONFIG_WATCHDOG_DEVPATH vs. hard-coded /dev/wdt 2016-10-21 07:09:20 -06:00
Gregory Nutt
1c20376e39 SAM GPIO: Apply Wolfgang's change for SAM3/4 to SAMA5 and SAMV7 2016-09-20 15:33:31 -06:00
Wolfgang Reißnegger
3f22b63321 SAM3/4: Fix GPIO pull-up/down code. 
Enabling the pull-down resistor while the pull-up resistor is still enabled
is not possible. In this case, the write of PIO_PPDER for the relevant I/O
line is discarded. Likewise, enabling the pull-up resistor while the
pull-down resistor is still enabled is not possible. In this case, the
write of PIO_PUER for the relevant I/O line is discarded.
 2016-09-20 13:32:04 -07:00
Gregory Nutt
4dc3521743 All SAM Ethernet Drivers: Add support so that the drivers can be built with CONFIG_NET_MULTIBUFFER=y 2016-09-20 08:56:36 -06:00
Gregory Nutt
046acf6b54 Add a simulated oneshot lowerhalf driver 2016-08-12 13:14:03 -06:00
Gregory Nutt
b4e8876b09 Correct some spacing 2016-08-12 12:41:49 -06:00
Gregory Nutt
82b86cdcf3 oneshot interface: max_delay method should return time in a standard struct timespec form. 2016-08-12 11:33:10 -06:00
Gregory Nutt
61b0ac06bf Missed a dependency in last set of commits 2016-08-11 17:20:12 -06:00
Gregory Nutt
a5a776e223 SAM4CM: Add option to support oneshot timer without free-running timer. Add oneshot lower half driver. 2016-08-11 17:04:19 -06:00
Gregory Nutt
0e35bad987 Update some comments 2016-08-11 10:12:04 -06:00
Gregory Nutt
7823a1680e Update a comment 2016-08-09 17:08:03 -06:00
Gregory Nutt
698d6d1294 SAM3/4: Extend clocking logic to enable clocking on ports D-F 2016-08-09 17:05:11 -06:00
Wolfgang Reissnegger
cf35bb0b18 SAM3/4 GPIO: Enable peripheral clock for GPIO port when GPIO is configured as input. 
The value of a GPIO input is only sampled when the peripheral clock for
the port controller the GPIO resides in is enabled. Therefore we need
to enable the clock even when polling a GPIO.
 2016-08-09 13:23:05 -07:00
Gregory Nutt
e895e19b9f Minor changes from review of last PR 2016-07-24 07:45:46 -06:00
Wolfgang Reissnegger
c0fa319f2b SAM3/4 UDP: Fix handling of endpoint RX FIFO banks. 
This fixes a race condition where the HW fills a FIFO bank while the SW is
busy, resulting in out of sequence USB packets.
 2016-07-23 20:11:04 -07:00
Wolfgang Reissnegger
cc191a977d SAM3/4 UDP: Remove redundant EP state assignment. 2016-07-23 20:11:03 -07:00
Wolfgang Reissnegger
f3a6a40f62 SAM3/4 Serial: Fix warning when CONFIG_SUPPRESS_UART_CONFIG is set. 2016-07-23 16:23:49 -07:00
Gregory Nutt
96d5b734a8 Add missing TWI definitions 2016-07-21 08:01:59 -06:00