sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
48,417 Commits 1 Branch 0 Tags 291 MiB
9b4d784307
Commit Graph

15 Commits

Author SHA1 Message Date
Xiang Xiao
a851ad84c3 net: consistent the net sem wait naming conversion 
to prepare the new mutex wait function

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-01-15 12:31:30 -03:00
chao an
8a63d29c6e net/devif_poll: optimize device buffer alloc in txpoll 
Allocate the device buffer only if the protocol really need to send data.
not all protocols require the driver to prepare additional iob before
sending, especially UDP, each iob reserves l2/l3 header in advance
after prepare write buffer, net device could reuse this entry to send directly

Signed-off-by: chao an <anchao@xiaomi.com>
 2023-01-13 16:41:10 +08:00
chao an
11de08de27 net/devif_send: replace all block send to nonblock mode 
Signed-off-by: chao an <anchao@xiaomi.com>
 2022-12-08 09:53:15 +01:00
chao an
34d2cde8a8 net/l2/l3/l4: add support of iob offload 
1. Add new config CONFIG_NET_LL_GUARDSIZE to isolation of l2 stack,
   which will benefit l3(IP) layer for multi-MAC(l2) implementation,
   especially in some NICs such as celluler net driver.

new configuration options: CONFIG_NET_LL_GUARDSIZE

CONFIG_NET_LL_GUARDSIZE will reserved l2 buffer header size of
network buffer to isolate the L2/L3 (MAC/IP) data on network layer,
which will be beneficial to L3 network layer protocol transparent
transmission and forwarding

------------------------------------------------------------
Layout of frist iob entry:

        iob_data (aligned by CONFIG_IOB_ALIGNMENT)
            |
            |                  io_offset(CONFIG_NET_LL_GUARDSIZE)
            |                                |
            -------------------------------------------------
      iob   |            Reserved            |    io_len    |
            -------------------------------------------------

-------------------------------------------------------------
Layout of different NICs implementation:

        iob_data (aligned by CONFIG_IOB_ALIGNMENT)
            |
            |                 io_offset(CONFIG_NET_LL_GUARDSIZE)
            |                                |
            -------------------------------------------------
 Ethernet   |       Reserved    | ETH_HDRLEN |    io_len    |
            ---------------------------------|---------------
 8021Q      |   Reserved  | ETH_8021Q_HDRLEN |    io_len    |
            ---------------------------------|---------------
 ipforward  |            Reserved            |    io_len    |
            -------------------------------------------------

--------------------------------------------------------------------

2. Support iob offload to l2 driver to avoid unnecessary memory copy

Support send/receive iob vectors directly between the NICs and l3/l4
stack to avoid unnecessary memory copies, especially on hardware that
supports Scatter/gather, which can greatly improve performance.

new interface to support iob offload:

  ------------------------------------------
  |    IOB version     |     original      |
  |----------------------------------------|
  |  devif_iob_poll()  |   devif_poll()    |
  |       ...          |       ...         |
  ------------------------------------------

--------------------------------------------------------------------

1> NIC hardware support Scatter/gather transfer

TX:

                tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
                           /              \
                          /                \
devif_poll_[l3|l4]_connections()     devif_iob_send() (nocopy:udp/icmp/...)
           /                                   \      (copy:tcp)
          /                                     \
  devif_iob_poll("NIC"_txpoll)                callback() // "NIC"_txpoll
                                                  |
                            dev->d_iob:           |
                                                ---------------         ---------------
                             io_data       iob1 |  |          |    iob3 |  |          |
                                    \           ---------------         ---------------
                                  ---------------  |       --------------- |
                             iob0 |  |          |  |  iob2 |  |          | |
                                  ---------------  |       --------------- |
                                     \             |          /           /
                                        \          |       /           /
                                   ----------------------------------------------
                    NICs io vector |    |    |    |    |    |    |    |    |    |
                                   ----------------------------------------------

RX:

  [tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
                    |
                    |
      [tcp|udp|icmp|...]_ipv[4|6]_in()/...
                    |
                    |
          pkt/ipv[4/6]_input()/...
                    |
                    |
     NICs io vector receive(iov_base to each iobs)

--------------------------------------------------------------------

2> CONFIG_IOB_BUFSIZE is greater than MTU:

TX:

"(CONFIG_IOB_BUFSIZE) > (MAX_NETDEV_PKTSIZE + CONFIG_NET_GUARDSIZE + CONFIG_NET_LL_GUARDSIZE)"

                tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
                           /              \
                          /                \
devif_poll_[l3|l4]_connections()     devif_iob_send() (nocopy:udp/icmp/...)
           /                                   \      (copy:tcp)
          /                                     \
  devif_iob_poll("NIC"_txpoll)                callback() // "NIC"_txpoll
                                                  |
                                             "NIC"_send()
                          (dev->d_iob->io_data[CONFIG_NET_LL_GUARDSIZE - NET_LL_HDRLEN(dev)])

RX:

  [tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
                    |
                    |
      [tcp|udp|icmp|...]_ipv[4|6]_in()/...
                    |
                    |
          pkt/ipv[4/6]_input()/...
                    |
                    |
     NICs io vector receive(iov_base to io_data)

--------------------------------------------------------------------

3> Compatible with all old flat buffer NICs

TX:
                tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
                           /              \
                          /                \
devif_poll_[l3|l4]_connections()     devif_iob_send() (nocopy:udp/icmp/...)
           /                                   \      (copy:tcp)
          /                                     \
  devif_iob_poll(devif_poll_callback())  devif_poll_callback() /* new interface, gather iobs to flat buffer */
       /                                           \
      /                                             \
 devif_poll("NIC"_txpoll)                     "NIC"_send()(dev->d_buf)

RX:

  [tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
                    |
                    |
      [tcp|udp|icmp|...]_ipv[4|6]_in()/...
                    |
                    |
               netdev_input()  /* new interface, Scatter/gather flat/iob buffer */
                    |
                    |
          pkt/ipv[4|6]_input()/...
                    |
                    |
    NICs io vector receive(Orignal flat buffer)

3. Iperf passthrough on NuttX simulator:

  -------------------------------------------------
  |  Protocol      | Server | Client |            |
  |-----------------------------------------------|
  |  TCP           |  813   |   834  |  Mbits/sec |
  |  TCP(Offload)  | 1720   |  1100  |  Mbits/sec |
  |  UDP           |   22   |   757  |  Mbits/sec |
  |  UDP(Offload)  |   25   |  1250  |  Mbits/sec |
  -------------------------------------------------

Signed-off-by: chao an <anchao@xiaomi.com>
 2022-12-03 11:47:04 +08:00
chao an
d54a20b393 net/tcp/udp: remove all domain assertion 
fix build break if enable CONFIG_NET_IPv6 only

In file included from tcp/tcp_sendfile.c:38:
tcp/tcp_sendfile.c: In function ‘sendfile_eventhandler’:
tcp/tcp_sendfile.c:173:27: error: ‘struct tcp_conn_s’ has no member named ‘domain’
  173 |           DEBUGASSERT(conn->domain == PF_INET6);
      |                           ^~

Signed-off-by: chao an <anchao@xiaomi.com>
 2022-11-29 17:28:36 +08:00
chao an
3caa551ff4 net: remove psock reference from connect 
Signed-off-by: chao an <anchao@xiaomi.com>
 2022-11-24 22:57:42 +08:00
anjiahao
5724c6b2e4 sem:remove sem default protocl 
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
 2022-10-22 14:50:48 +08:00
chao.an
162fcd10ca net: cleanup pvconn reference to avoid confuse 
More reference:
https://github.com/apache/incubator-nuttx/pull/5252
https://github.com/apache/incubator-nuttx/pull/5434

Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-08-26 20:58:11 +08:00
chao.an
eac13a113d net/udp: remove psock hook to avoid invalid reference 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-02-10 15:04:33 -03:00
chao.an
3fce144aeb net/inet: move recv/send timeout into socket_conn_s 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-02-10 15:04:33 -03:00
chao.an
99cde13a11 net/inet: move socket flags into socket_conn_s 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-02-10 15:04:33 -03:00
chao.an
b10dcf7c0d net/udp: fix the invaild udp destination address 
If the udp socket not connected, it is possible to have
multi-different destination address in each iob entry,
update the remote address every time to avoid sent to the
incorrect destination.

Signed-off-by: chao.an <anchao@xiaomi.com>
 2021-12-17 11:25:06 -06:00
Gregory Nutt
57bc329aac Run nxstyle all .c and .h files modified by PR. 2020-05-17 14:01:00 -03:00
Gregory Nutt
a569006fd8 sched/: Make more naming consistent 
Rename various functions per the quidelines of https://cwiki.apache.org/confluence/display/NUTTX/Naming+of+OS+Internal+Functions

    nxsem_setprotocol -> nxsem_set_protocol
    nxsem_getprotocol -> nxsem_get_protocol
    nxsem_getvalue -> nxsem_get_value
 2020-05-17 14:01:00 -03:00
Xiang Xiao
677536ccf5 net/udp: Rename udp_psock_sendto_xxx.c to udp_sendto_xxx.c like TCP 
Rename udp_psock_sendto_xxx.c to udp_sendto_xxx.c like TCP and remove udp_psock_send.c
 2020-01-21 08:30:39 -06:00