sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
49,921 Commits 1 Branch 0 Tags 291 MiB
9c6f48e57b
Commit Graph

5314 Commits

Author SHA1 Message Date
ZhongAn
596f52c3ee Nuttx/dma: add dma framework for nuttx 
Signed-off-by: ZhongAn <zhongan@pinecone.net>
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
 2023-04-22 01:02:51 +08:00
yinshengkai
a297ff61f5 drivers/note: replace sched_note_filter_dump to sched_note_filter_tag 
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2023-04-19 02:53:34 +08:00
Fotis Panagiotopoulos
ab1b3c0337 Added missing checks in strdup'ed strings. 2023-04-19 02:49:31 +08:00
simbit18
433ec4c9de drivers/sensors/Kconfig: Fix bmp280 texts in Kconfig 
Fix SENSORS_BMP280 texts in Kconfig
 2023-04-19 02:46:09 +08:00
XinStellaris
a4546f35d2 drivers/mtd:fix uninit data in mtd_config_fs 
Signed-off-by: XinStellaris <tianxin7@xiaomi.com>
 2023-04-19 02:45:46 +08:00
SPRESENSE
20424a8a59 drivers/audio/cxd56.c: Fix freeze audio and add underrun notify 
Fix freeze audio driver when it start 2nd time.
And add underrun notify to application as an event.
 2023-04-17 10:24:48 +02:00
Zhe Weng
7671ed9615 usrsock_server: Raise error earlier for large sendto request 
It's better to raise error before client sends its (NIOVEC+1)th buffer
(and release buffers held by server), otherwise the client may stuck at
getting (NIOVEC+1)th tx buffer if NIOVEC is equal to rpmsg buffer num.

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
 2023-04-15 21:56:03 +09:00
Zhe Weng
0d118ec214 usrsock_server: Use remain instead of iov[0] to figure out partial requests 
Found a problem:

When sendto handler gets an error, it will release all its rx buffer,
then iov_base becomes NULL. But it cannot let client stop its request,
then the next data from client cannot be handled by usrsock server
correctly.

It's better to note down the remaining bytes, then we can stop at
correct time.

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
 2023-04-15 21:56:03 +09:00
simbit18
2309eacf9f drivers/sensors/Kconfig: Fix bmi160 help texts in Kconfig 
Fix bmi160 help texts in Kconfig
 2023-04-12 07:54:19 +02:00
zhangyuan21
c239d19df0 nuttx: add more dependent header file 
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
 2023-04-11 09:13:32 +03:00
wangming9
a7fc26124d arch/arm64: the arm64 perf interface supports pmu 
Summary:
- Support arm64 pmu api, Currently only the cycle counter function is supported.
- Using ARM64 PMU hardware capability to implement perf interface, modify all
  perf interface related code.
- Support for pmu init under smp.

Signed-off-by: wangming9 <wangming9@xiaomi.com>
 2023-04-10 16:23:49 -03:00
zouboan
90ff76dfd6 drivers/sensors: add support of InvenSense MPU-9250 sensor 2023-04-10 11:25:42 -03:00
yinshengkai
b3e1004658 sched_note: add function auto-tracing 
After enabling this option, you can automatically trace the function instrumentation without adding tracepoint manually.
This is similar to the Function Trace effect of the linux kernel

Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2023-04-10 11:04:24 -03:00
Dong Heng
a51e102a41 xtensa/esp32: Make asprintf and lib_free corresponding 2023-04-06 20:57:19 +03:00
raiden00pl
478f2f3d5f rndis: move private definitions from a public header to the source file 2023-03-31 08:17:01 +09:00
raiden00pl
58e817db76 rndis: do not configure endpoints from Kconfig when composite enabled 
This should be done from a board specific logic, as for other composite devices
 2023-03-31 08:17:01 +09:00
Lwazi Dube
18d196e968 usbhost_hidkbd: Add the option to use interrupt transfers. 
Using the interrupt pipe is recommended in the Get_Report
request section of the HID standard. This option has been
added to support some keyboards that refuse to return valid
keys when polled using the Get_Report request. Support for
the Caps Lock key, including LED, has also been added.
 2023-03-29 09:22:41 -03:00
Zhe Weng
9fd4d6b767 usrsock_server: Do not poll SOCK_CTRL. 
It seems that we don't need to poll the SOCK_CTRL sockets, so skip them in usrsock server.

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
 2023-03-29 09:18:36 -03:00
zhanghongyu
0550082966 usrsock_server: add debug info for poll_setup 
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
 2023-03-29 09:18:36 -03:00
raiden00pl
bed53538e8 rndis: EP0 belongs to composite class if composite enabled 2023-03-28 19:43:56 -03:00
raiden00pl
8de2197773 rndis: exclude the logic that belongs to composite 2023-03-28 19:43:56 -03:00
raiden00pl
cb05700acf rndis: interface association descriptor should depend on CONFIG_COMPOSITE_IAD 2023-03-28 19:43:56 -03:00
raiden00pl
10f1d3e76e rndis: fix dev info init for composite 2023-03-28 19:43:56 -03:00
raiden00pl
9b70e010dc rndis: refactor usbdev_rndis_get_composite_devdesc to make it more like in other composite drivers 2023-03-28 19:43:56 -03:00
Huang Qi
c623a7b731 drivers/lcd/st7789: Support mirror X/Y 
Support mirror display by X/Y axis, it's useful for
single portrait/landscape but need to mirror specific direction.

Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2023-03-27 17:55:49 -03:00
Xiang Xiao
bc3e6c84e1 arch: Rename up_[early]serialinit to [arm64|riscv|x86_64][early]serialinit 
The naming standard at:
https://cwiki.apache.org/confluence/display/NUTTX/Naming+of+Architecture%2C+MCU%2C+and+Board+Interfaces
requires that all MCU-private function begin with the name of the architecture, not up_.

follow the change from: https://github.com/apache/nuttx/pull/930

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-03-27 12:35:04 +03:00
Lwazi Dube
21ffb4de72 boards/sama5d3-xplained: Make hot plugging more reliable. 2023-03-26 13:03:21 -03:00
Huang Qi
7ce78dd66a Revert "driver/uart_rpmsg: Passthrough data by default" 
This reverts commit 64e611d71e.
 2023-03-24 14:59:41 -03:00
raiden00pl
50cf84c99a usbdev-composite: ep0 submit should be send only once for the composite class 2023-03-24 14:54:31 -03:00
raiden00pl
d014b9d384 rndis: use composite_ep0submit to send the ep0 when composite 2023-03-24 14:54:31 -03:00
raiden00pl
6caa9317f6 usbmsc: do not send deferred response if we are part of the composite device 
EP0 is owned by the composite class so it shouldn't be directly accessed by usbmsc
 2023-03-24 14:52:50 -03:00
chao an
cdcdce16f7 wireless/bcm43xxx: enter power saving only if IEEE80211_BROADCOM_LOWPOWER enabled 
Signed-off-by: chao an <anchao@xiaomi.com>
 2023-03-22 17:26:52 -03:00
chao an
266774939f wireless/bcm43xxx: downgrade log level of allocate frame fail 
Signed-off-by: chao an <anchao@xiaomi.com>
 2023-03-22 17:26:52 -03:00
chao an
4e3480554d mmcsd/sdio: enlarge cmd53 timeout to 1s 
cmd53 need a longer tolerance on some slow devices

Signed-off-by: chao an <anchao@xiaomi.com>
 2023-03-22 17:26:52 -03:00
chao an
1b46484849 mmcsd/sdio: fix potential race condition in sdio 
sdio driver should ensure the thread safety

Signed-off-by: chao an <anchao@xiaomi.com>
 2023-03-21 14:40:44 -03:00
Lwazi Dube
84a3ddd79b boards/sama5d3-xplained: Fix OHCI clock. 
Choose a divider value that matches the description provided within
the same header file.
Include stddef.h to fix compiler errors because NULL is not defined.
Make logs print protocol, vid and pid consistently, (decimal hex hex).
 2023-03-21 14:08:03 -03:00
Lucas Saavedra Vaz
326261dd7d drivers/audio/es8388: Add input support 2023-03-21 12:13:59 -03:00
yinshengkai
64e7e43f1f drivers/note: adjust the note_driver_ops definition 
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2023-03-21 12:13:38 -03:00
yinshengkai
9ecaa022c8 note: fix assignment warning 
note/note_driver.c:154:7: warning: unsigned conversion from ‘int’ to ‘unsigned char’ changes value from ‘65535’ to ‘255’ [-Woverflow]
  154 |     , CONFIG_SCHED_INSTRUMENTATION_CPUSET
      |       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2023-03-21 12:13:38 -03:00
yinshengkai
d73fb5ca21 note: fix sched_note_suspend logic error 
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2023-03-21 12:13:38 -03:00
Huang Qi
fab77cd322 drivers/pty: Echo input by default 
Align the pty behavior to linux/bsd,

Also fix the ECHO issue with microadb after https://github.com/apache/nuttx/pull/8691.

adb shell will echo normally with this patch.

Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2023-03-21 07:23:17 +09:00
Sebastien Lorquet
13d823f307 spi_xx25xx: Repair the spi bus locking mechanism when waiting for write completion 2023-03-20 07:08:16 -07:00
Xiang Xiao
e7090022a0 drivers/serial: Fix some typo error report in https://github.com/apache/nuttx/pull/8843 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-03-20 08:08:04 +01:00
Xiang Xiao
d9a8d5f2ee usb/cdcacm: Remove the process for tc_iflag, tc_oflag and tc_lflag 
since the common code in serial.c already handle them correctly:
https://github.com/apache/nuttx/blob/master/drivers/serial/serial.c#L1556-L1601

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-03-19 14:54:59 -06:00
Xiang Xiao
b63994b7f7 drivers/serial: Always support c_oflag, c_iflag and c_lflag in termios 
CONFIG_SERIAL_TERMIOS only decide whether to support c_cflag field since
many terminal application need the first three fields to work correctly.
For more information please reference:
https://www.mail-archive.com/dev@nuttx.apache.org/msg09321.html

before this change(olimexino-stm32:tiny):
   text    data     bss     dec     hex filename
  34884     328    1768   36980    9074 nuttx
after this change:
   text    data     bss     dec     hex filename
  35052     340    1768   37160    9128 nuttx
delta
   text    data     bss     dec     hex filename
    168      12       0     180      b4 nuttx

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-03-19 14:54:59 -06:00
zhanghongyu
9a28cd2000 tun: fix the access address is incorrect 
correct eth_hdr address and reset d_iob to NULL after netdev_iob_prepare

Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
 2023-03-15 22:34:59 +01:00
zhangyuan21
443c4c46b0 arch_timer: fixed build issue when enable tickless 
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
 2023-03-15 11:52:52 +01:00
raiden00pl
a6c1ef3c52 wireless/bluetooth: add RPMSG HCI controller support 2023-03-14 09:51:13 +08:00
Michal Lenc
0797b03c08 mmcsd: add nxsig_usleep delay after MMC_CMD1 command 
MMC_CMD1 command is used to check whether card is MMC type (checked if
CONFIG_MMCSD_MMCSUPPORT is enabled). This commit inserts nxsig_usleep
wait if this check fails. This is to ensure the communication recovers
from invalid response as this may take some time on some platforms (
samv7 for example). Following command for SDHC check may fail if sleep
is not used.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
 2023-03-13 22:22:54 +02:00
Huang Qi
061e98aa98 drivers/serial: Fix wrong ECHO flag 
There is a rookie mistake introduced by https://github.com/apache/nuttx/pull/8691,
ECHO flag is a part of Local Mode (c_lflags) instead of c_iflags.

nuttx-apps should do the same change in nsh_login and termcurse_vt100.

Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2023-03-13 16:29:36 -03:00
zouboan
474bcedbd4 sensor/mpu60x0: Fix some error bit and width macro 2023-03-12 15:59:56 +02:00
raiden00pl
b9fd059914 drivers/bluetooth: bth4 depends on bluetooth definitions 2023-03-11 20:30:25 -03:00
Petro Karashchenko
61e996af33 drivers/usbmisc: remove redundant scope in switch/case 
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2023-03-09 16:27:07 -03:00
Petro Karashchenko
4581a84064 nuttx: fix indentation issue 
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2023-03-09 16:27:07 -03:00
Gonzalo Aterido
6cb649ecf6 Fix unwanted flush in the SPI slave driver 2023-03-09 03:53:35 +08:00
Huang Qi
cfe6c4be8e driver/serial: Only enable tx interrupt if tx buffer is not empty 
Fix https://github.com/apache/nuttx/issues/8731

Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2023-03-08 16:02:56 +02:00
Karel Kočí
62661600b2 treewide: add DOWNLOAD variable as unification of curl call 
This is a followup to the commit
03b164f59c.
 2023-03-08 17:05:05 +08:00
Huang Qi
64e611d71e driver/uart_rpmsg: Passthrough data by default 
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2023-03-08 16:39:17 +08:00
Michal Lenc
88f3d89920 pwm: add configuration option for dead time generators 
PWM drivers usually supports dead time generators that automatically
insert output activation delay for complementary PWM outputs. This
is usefull for some control purposes as control of H bridge for example.

This commit adds an application to driver interface that can be used
to set up those delays (if supported by the selected architecture)
directly from the application. The set up remains the same as for duty
cycle value.

The whole addition is by default disabled. It can be enabled by config
option PWM_DEADTIME.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
 2023-03-07 01:30:01 +08:00
TimJTi
94f0283bdd Correct DEBUGASSERT code error, _err format error, better C89 compatability 
Update drivers/power/supply/act8945a.c

Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2023-03-06 17:25:39 +02:00
jturnsek
4c2edece50 Adding support for LS027B7DH01A display and MEMLCD_EXTCOMIN_MODE_HW 2023-03-06 16:23:15 +02:00
jturnsek
97b4900c59 Bug fixes and improved interrupt support for mcp23x17 driver 2023-03-06 08:40:33 +08:00
Tiago Medicci Serrano
a3badd26a0 drivers/serial: Echo CR if NL is detected if console 
Echoing console's input is now performed by the serial driver
(https://github.com/apache/nuttx/pull/8691). In order to keep old
behavior of CR being echoed by the device, it's needed to detected
whenever NL is being echoed and send CR before sending it.
 2023-03-05 09:44:26 +08:00
zhangyuan21
699c930987 drivers/usb: fixed sim usb dev and host build issue 
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
 2023-03-03 14:31:30 -03:00
Xiang Xiao
a2190aeb35 Fix error: '%s' directive output may be truncated 
writing up to 31 bytes into a region of size 27 [-Werror=format-truncation=]

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-03-03 04:08:22 -08:00
Huang Qi
44857ab30e driver/serial: Echo only determined by ECHO flag with termios enabled 
Fix a bug that can not disable echo even if termios is enabled.

Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2023-03-03 09:44:30 +02:00
Huang Qi
68384e9db4 drivers/serial: Echo input in driver layer 
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2023-03-03 11:37:41 +08:00
yinshengkai
6e35a51feb note: optimize noteram_add, copy as much content as possible at a time 
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2023-03-02 22:55:50 +08:00
Huang Qi
5ced61ce08 drivers/serial: Include spawn.h required by CONFIG_TTY_LAUNCH 
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2023-03-02 11:43:28 +08:00
zhanghongyu
16ea80e53b rndis: support iob offload 
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
 2023-03-02 02:50:59 +08:00
yinshengkai
67461175fe note: support note filtering at runtime 
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2023-03-01 22:09:41 +08:00
huxiandong
266455f01c mtd: Extend isbad and markbad func for mtd_dev_s 
Signed-off-by: huxiandong <huxiandong@xiaomi.com>
 2023-03-01 10:06:56 -03:00
Huang Qi
b178ce4da9 driver/pty: Map CR->LF from terminal input 
NuttX only treat \n as new line after https://github.com/apache/nuttx/pull/8628,
so need this conversion to interact with terminal emulator.

Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2023-02-27 21:12:35 +08:00
Xiang Xiao
2c5f653bfd Remove the tail spaces from all files except Documentation 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-02-26 13:24:24 -08:00
zhangyuan21
528dce4f7f usbdev/adb: fixed adb build issue 
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
 2023-02-27 01:30:19 +08:00
yinshengkai
aa6bffef83 drivers/note: dump the latest scheduling information when panic 
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2023-02-25 18:39:27 +08:00
yinshengkai
f9f0ab8dc4 drivers: add note driver backend for recording scheduling information 
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2023-02-25 18:39:27 +08:00
pengyiqiang
621bf54efc drivers/video/fb: fix poll event lost 
Signed-off-by: pengyiqiang <pengyiqiang@xiaomi.com>
 2023-02-24 22:21:09 +08:00
yinshengkai
9ed1519cea note: handle tcb is empty, so that it can also record before the driver initialization 
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2023-02-24 14:07:33 +08:00
lilei19
38f64f559d change strcpy to strlcpy 
Signed-off-by: lilei19 <lilei19@xiaomi.com>
 2023-02-24 12:15:40 +08:00
ligd
8b078d261f rptun: fix rptun_start() failed 
Signed-off-by: ligd <liguiding1@xiaomi.com>
 2023-02-23 22:49:47 +08:00
yinshengkai
29a7d267fb note: correct systime with perf count 
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2023-02-23 22:30:07 +08:00
yinshengkai
55ce5d0511 note: remove SCHED_INSTRUMENTATION_HIRES 
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2023-02-23 22:30:07 +08:00
Xiang Xiao
c54c9395a5 Revert "drivrs/mtd/filemtd.c: add block device MTD interface. Block MTD interface allows using block device directly as MTD instead of having to use file-system in between. NOTE that this provides the opposite capability of FTL which will let you use an MTD interface directly as a block device." 
since filemtd can handle not only char device, but also block device.
This reverts commit 5ef548677a.
 2023-02-22 16:38:29 +08:00
Zhe Weng
9d53de374c usrsock: Add DebugAssert for poll setup result 
We never check its result and assume it will success, so an assert should be better than retval.

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
 2023-02-22 01:42:14 +08:00
Xiang Xiao
a841be9b9c drivers/note: Remove the warning of preemption and critical sections 
since both aren't suitable after:
commit 98ab55ef68
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date:   Fri Dec 30 12:02:47 2022 +0800

    drivers/note: Replace the scritical section with spin_xxx_wo_note

    to avoid to generate the unexpected schedule information

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-02-20 19:27:32 +08:00
chao an
ee1e1108a7 drivers/note: fix build break by note rename change 
Regression by:

| commit ee24396d77
| Author: Xiang Xiao <xiaoxiang@xiaomi.com>
| Date:   Tue Feb 14 01:11:48 2023 +0800
|
|     drivers/note: Change DRIVER_NOTExxx to DRIVERS_NOTExxx
|
|     follow other driver config style
|
|     Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>

Signed-off-by: chao an <anchao@xiaomi.com>
 2023-02-20 16:19:57 +08:00
Xiang Xiao
ee24396d77 drivers/note: Change DRIVER_NOTExxx to DRIVERS_NOTExxx 
follow other driver config style

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-02-20 14:30:59 +08:00
Xiang Xiao
eafc80c055 drivers/note: Remove the dependence of noteram driver 
since after the below commit, noteram driver can work even when
the instrumentation of csection, spinlock and smp is enabled

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-02-20 14:30:59 +08:00
Xiang Xiao
6b14ad9337 driver/note: Restore SCHED_INSTRUMENTATION config to sched/Konfig 
since the chip/board vendor could disable dirvers/note and
provide the implementation of sched_note_xxx by self

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-02-20 14:30:59 +08:00
Oreh
9902f39d92 Add MTD loop driver (use filemtd) 2023-02-19 19:46:48 +08:00
Michal Lenc
333707e101 pwm: add PWM overwrite under CONFIG_PWM_OVERWRITE option 
Generic drivers shoud not use architecture related config options like
CONFIG_SAMV7_PWM. This commit adds PWM pin overwrite under generic
configuration option CONFIG_PWM_OVERWRITE.

Now the overwrite can be used on other architectures as well or can be
completely disabled for SAMv7.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
 2023-02-19 00:16:41 +08:00
TimJTi
f629b6063c Correct inconsistencies 2023-02-18 11:03:38 +08:00
Igor Mišić
8e4d461d61 drivers/mtd/ramtron: change nsectors size to uint32 2023-02-17 11:19:46 -03:00
Fotis Panagiotopoulos
85ceb7920e Typo fixes. 2023-02-17 11:17:11 -03:00
David Sidrane
9d0e712347 mmcsd_sdio:Release CPU during wait for Write Completion 2023-02-17 15:26:19 +08:00
David Sidrane
d570a93945 mmcsd_sdio:Insure a error exiting via mmcsd_removed will not Hang system. 
mmcsd_removed will be called if the card is in invalid state.
   This can happen if the card is bad, or vibrations causes a power
   loss.

   mmcsd_removed resets:
     priv->capacity     = 0; /* Capacity=0 sometimes means no media */
     priv->blocksize    = 0;
     priv->probed       = false;
     priv->mediachanged = false;
     priv->wrbusy       = false;
     priv->type         = MMCSD_CARDTYPE_UNKNOWN;
     priv->rca          = 0;
     priv->selblocklen  = 0;
     priv->widebus      = false;

  If blocksize is set to 0 will cause the log2 to result
  in an infinate loop in some drivers.

  IS_EMPTY will check for priv->type = MMCSD_CARDTYPE_UNKNOWN
  and return ENODEV.
 2023-02-17 15:26:19 +08:00
Nathan Hartman
409e2f3701 drivers/serial, libc/termios: Implement tcsendbreak 
The TERMIOS(3) function tcsendbreak() and the IOCTLs TCSBRK and TCSBRKP
transmit a serial line Break.

Previously NuttX included an extern declaration for tcsendbreak() and
defines for TCSBRK and TCSBRKP but none of these were implemented.
Attempting to build programs that called tcsendbreak() would fail with
a linker error; attempting to use TCSBRK and TCSBRKP would result in an
error at runtime.

This changeset adds the tcsendbreak() function and handling for TCSBRK
and TCSBRKP; tcsendbreak() is implemented in terms of TCSBRK. Both
TCSBRK and TCSBRKP are implemented in terms of the BSD-compatible Break
IOCTLs TIOCSBRK and TIOCCBRK, which must be provided by the lower half
serial driver. Currently, not all lower half serial drivers in NuttX
support these IOCTLs. Those that do implement them may need one or more
Kconfig options to be set, such as `CONFIG_*_U[S]ART_BREAKS` and, on
some architectures, a separate `CONFIG_*_SERIALBRK_BSDCOMPAT`.

* drivers/serial/serial.c
  (uart_tcsendbreak): New function.
  (uart_ioctl): Implement TCSBRK and TCSBRKP.

* libs/libc/termios/lib_tcsendbreak.c
  (): New file.

* libs/libc/termios/Make.defs
  (CSRCS): Add lib_tcsendbreak.c to the build.

Thanks to Xiang Xiao for PR feedback.

Co-authored-by: Xiang Xiao <xiaoxiang781216@gmail.com>
 2023-02-15 07:50:02 +08:00
zhangyuan21
32513cedf0 usbdev/adb: add adb usbclass_unbind function 
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
 2023-02-14 22:20:12 +08:00
jihandong
a1e04617f8 drivers/video/video: add poll support to capture 
support part of Linux std:
https://www.kernel.org/doc/html/v4.9/media/uapi/v4l/func-poll.html

Capture devices set the POLLIN and POLLRDNORM flags in the revents field

Signed-off-by: jihandong <jihandong@xiaomi.com>
 2023-02-13 23:17:45 +08:00
jihandong
ae7bc4e300 drivers/video/video: add NONBLOCK support 
Signed-off-by: jihandong <jihandong@xiaomi.com>
 2023-02-13 23:17:45 +08:00
zhangyuan21
b4aa5b0d0b usbdev: fixed DUALSPEED issue for adb/cdcecm/rndis 
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
 2023-02-13 18:47:42 +08:00
TimJTi
98e47a1770 FUSB302 
Update fusb302.c

Update fusb302.c
 2023-02-12 16:48:44 +08:00
zhangyuan21
8f4cb0fec3 rndis: add endpoint configure 
ep3 is not avaliable in dummy hcd, so need to
make the endpoint number configurable.

Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
 2023-02-12 16:38:11 +08:00
zhangyuan21
f77a824105 usbdev/composite: remove excess uninitialize code 
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
 2023-02-12 16:37:21 +08:00
zhangyuan21
4ddcb88c65 usbhost: fixed cdcacm issue 
1. fixed cdcacm build issue
2. unregister uart driver when usbhost destroy

Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
 2023-02-12 14:17:51 +08:00
Michal Lenc
824e6b3271 lcd/st7789: raise compilation error when CONFIG_SPI_CMDDATA is not set 
CONFIG_SPI_CMDDATA is required for correct functionality of the display.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
 2023-02-11 20:32:20 +08:00
David Sidrane
ac50b3a473 ioexpander/gpio:Add gpio_pin_register_byname 2023-02-11 18:31:40 +08:00
Peter Bee
1949991fe0 drivers/video: add sequence number to video frames 
Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
 2023-02-09 23:27:15 +08:00
Peter Bee
2ebccd82b6 drivers/video: add timestamp support 
Add support for timestamp and change in related drivers

Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
 2023-02-09 23:27:15 +08:00
chao an
74ce3b81d3 build/Kconfig: add BINDIR/APPSBINDIR to support out of tree build 
First decoupling changes related to CMAKE

BINDIR/APPSBINDIR:
Output path of Kconfig which dynamically generated by NuttX Kernel/Apps
This option is consistent with the TOPDIR/APPSDIR by default, and will
be changed when out-of-tree compilation is supported

Signed-off-by: chao an <anchao@xiaomi.com>
 2023-02-09 20:13:04 +08:00
chao an
e942a7c55e build/Kconfig: fix warnings detected by kconfiglib 
Signed-off-by: chao an <anchao@xiaomi.com>
 2023-02-09 20:07:46 +08:00
chao an
3a0fdb019d nuttx: replace all ARRAY_SIZE()/ARRAYSIZE() to nitems() 
Signed-off-by: chao an <anchao@xiaomi.com>
 2023-02-09 20:05:44 +08:00
Huang Qi
b250db5dba serial: Fix a warning if termios enabled 
Fix:
```
 serial/serial.c: In function 'uart_ioctl':
Error: serial/serial.c:1397:46: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
 1397 |               FAR struct termios *termiosp = (FAR struct termios *)arg;
      |                                              ^
Error: serial/serial.c:1419:46: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
 1419 |               FAR struct termios *termiosp = (FAR struct termios *)arg;
      |
```

Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2023-02-08 13:31:35 +08:00
Huang Qi
3e41bd8b35 driver/serial: Convert CR to LF in driver 
Enable the behavior by default for console,
but configurable by termios.

Binary size:

Before:
   text    data     bss     dec     hex filename
 326460     409    8164  335033   51cb9 nuttx/nuttx

 After:
    text    data     bss     dec     hex filename
 326478     409    8164  335051   51ccb nuttx/nuttx

Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
 2023-02-08 13:31:35 +08:00
Igor Mišić
0a4fbcd123 drivers/mtd: add Kconfig options for RAMTRON emulated page & sector size 2023-02-08 01:44:51 +08:00
chao an
1cb11968b7 net/ip: fix compile break if enable NET_LOCAL_SCM 
1.
net/slip.c:865:29: warning: unused variable ‘priv’ [-Wunused-variable]
  865 |   FAR struct slip_driver_s *priv =
      |                             ^~~~
net/slip.c: In function ‘slip_rmmac’:
net/slip.c:895:29: warning: unused variable ‘priv’ [-Wunused-variable]
  895 |   FAR struct slip_driver_s *priv =
      |                             ^~~~
2.
local/local_sendmsg.c: In function ‘local_sendmsg’:
local/local_sendmsg.c:423:18: warning: ‘count’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  423 |           return count;
      |                  ^~~~~
local/local_sendmsg.c:131:11: warning: ‘i’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  131 |   while (i-- > 0)
      |          ~^~
local/local_sendmsg.c:71:7: note: ‘i’ was declared here
   71 |   int i;
      |       ^

Signed-off-by: chao an <anchao@xiaomi.com>
 2023-02-07 12:46:40 +02:00
Nathan Hartman
5f9cb6faf4 drivers/serial: Fix docstrings on UART interrupt handlers 2023-02-07 04:41:36 +08:00
chao an
1779433c35 wireless/bcm43xxx/qspi: try tx after rx fails 
1. Try tx after rx fails to avoid gspi_thread busy to try rx
2. Add some delay if alloc frame buffer failed

Signed-off-by: chao an <anchao@xiaomi.com>
 2023-02-07 04:40:38 +08:00
chao an
d5ac2be84f bcm43xxx/bcmf_ioctl.h: pack wl_* structure to avoid unaligned access 
Signed-off-by: chao an <anchao@xiaomi.com>
 2023-02-07 04:40:38 +08:00
chao an
d03b105160 drivers/syslog: correct Kconfig name 
Signed-off-by: chao an <anchao@xiaomi.com>
 2023-02-05 01:05:32 +08:00
chao an
7625126c91 Remove the remain MIN/MAX like macro 
Signed-off-by: chao an <anchao@xiaomi.com>
 2023-02-03 23:22:41 +08:00
chao an
d1162ac58f mmcsd/mmcsd_spi: remove redundant mmcsd_unlock() 
Assertion on lm3s6965-ek/qemu-flat if enable CONFIG_DEBUG_ASSERTIONS:

_assert: Current Version: NuttX  12.0.0 666b224c35 Feb  3 2023 19:36:38 arm
_assert: Assertion failed : at file: misc/lib_mutex.c:336 task: nsh_main 0xb385

Backtrace:
nuttx/libs/libc/sched/sched_dumpstack.c:69
nuttx/sched/misc/assert.c:494
nuttx/libs/libc/assert/lib_assert.c:36
nuttx/libs/libc/misc/lib_mutex.c:336
nuttx/drivers/mmcsd/mmcsd_spi.c:421
nuttx/drivers/mmcsd/mmcsd_spi.c:2072
nuttx/boards/arm/tiva/lm3s6965-ek/src/lm_bringup.c:119 (discriminator 3)
nuttx/boards/boardctl.c:335
apps/nshlib/nsh_init.c:144
apps/system/nsh/nsh_main.c:68
nuttx/libs/libc/sched/task_startup.c:70 (discriminator 2)
nuttx/sched/task/task_start.c:134

Signed-off-by: chao an <anchao@xiaomi.com>
 2023-02-03 16:34:04 +02:00
Xiang Xiao
09841300b0 Remove the remain MIN/MAX like macro 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-02-03 20:42:57 +08:00
chao an
4c8d244fae sched/getpid: replace syscall getpid/tid/ppid() to kernel version 
NuttX kernel should not use the syscall functions, especially after
enabling CONFIG_SCHED_INSTRUMENTATION_SYSCALL, all system functions
will be traced to backend, which will impact system performance.

Signed-off-by: chao an <anchao@xiaomi.com>
 2023-02-02 10:33:01 +08:00
Gustavo Henrique Nihei
e6b204f438 nuttx: Use MIN/MAX definitions from "sys/param.h" 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2023-02-01 23:47:44 +08:00
anjiahao
52eaefcc8e watchdog:fix Kconfig typo 
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
 2023-02-01 19:50:47 +08:00
pengyiqiang
b1773934fe note_driver: fix build error 
note/note_driver.c: In function 'note_isenabled':
note/note_driver.c:278:7: error: invalid type argument of unary '*' (have 'int')
  278 |   if (CPU_ISSET(&g_note_filter.mode.cpuset, this_cpu()) == 0)
      |       ^~~~~~~~~
note/note_driver.c:278:7: error: invalid operands to binary << (have 'int' and 'volatile cpu_set_t *' {aka 'volatile unsigned char *'})
  278 |   if (CPU_ISSET(&g_note_filter.mode.cpuset, this_cpu()) == 0)
      |       ^~~~~~~~~
      |                 |
      |                 volatile cpu_set_t * {aka volatile unsigned char *}

Signed-off-by: pengyiqiang <pengyiqiang@xiaomi.com>
 2023-02-01 14:30:33 +08:00
Xiang Xiao
9f027208d4 fs: Add model field to geometry and mtd_geometry_s 
the model is very useful to track the device info

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-01-31 11:50:28 -03:00
Ville Juven
da83836da7 drivers/mmcsd: Fix kconfig error regarding MMCSD_IOCSUPPORT 
Something I noticed in CI:
drivers/mmcsd/Kconfig:32:warning: 'MMCSD_IOCSUPPORT': number is invalid
 2023-01-31 13:56:17 +01:00
Xiang Xiao
55679aec5f drivers/camera: Support the private data for imgsensor and imgdata 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-01-31 08:04:39 +01:00
dongjiuzhu1
74e032e924 drivers/pipes: fix write busy loop because POLLOUT always ready. 
the size of pipes buffer +1 as compensate the full indicator

Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
 2023-01-31 12:45:16 +08:00
Xiang Xiao
004853d6d1 drivers/watchdog: Fix the wrong value of WATCHDOG_AUTOMONITOR_PING_INTERVAL 
if CONFIG_WATCHDOG_AUTOMONITOR_PING_INTERVAL equals 0, we should set
WATCHDOG_AUTOMONITOR_PING_INTERVAL to CONFIG_WATCHDOG_AUTOMONITOR_TIMEOUT / 2, not 0

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-01-31 11:54:36 +08:00
Zhe Weng
d3dd349649 net: Implement shutdown() for usrsock 
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
 2023-01-31 11:15:01 +08:00
lilei19
1d8af7e105 add holder for mutex 
Signed-off-by: lilei19 <lilei19@xiaomi.com>
 2023-01-31 12:08:05 +09:00
Nathan Hartman
6b89b6f945 Remove executable permissions from source files 
* arch/arm/src/sama5/sam_flexcom_spi.h,
  arch/risc-v/src/mpfs/mpfs_ihc_sbi.c,
  drivers/usbdev/adb.c,
  libs/libc/math/lib_scalbn.c,
  libs/libc/math/lib_scalbnf.c,
  net/ipfrag/Make.defs,
  net/ipfrag/ipfrag.c,
  net/ipfrag/ipfrag.h,
  net/ipfrag/ipv4_frag.c,
  net/ipfrag/ipv6_frag.c: Remove executable permission.
 2023-01-30 20:34:51 -03:00
helei8
4b4004b874 drivers/mmcsd: Add MMC_IOC_CMD ioctl 
Signed-off-by: helei8 <helei8@xiaomi.com>
 2023-01-30 14:09:23 -03:00
Zhe Weng
ff68d9ac04 net/tun: Change TUN/TAP to use IOB 
TUN/TAP is not working after IOB offload, try to fix.

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
 2023-01-31 00:39:15 +08:00
Zhe Weng
af0a35f9ae net/slip: Change SLIP to use IOB 
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
 2023-01-30 23:42:01 +08:00
anjiahao
6f2f62f4ce watchdog:fix Kconfig typo 
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
 2023-01-30 15:49:50 +01:00
Oleksandr Oryshchenko
0842a291e0 [Drivers] Add smart_loop_register_driver call to drivers_initialize 2023-01-30 11:09:40 +08:00
Oleksandr Oryshchenko
28f92e8238 [MTD/SmartFS] Extract register_driver call to own function 2023-01-30 11:09:40 +08:00
Xiang Xiao
7d66a16c53 Minor style clean up 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-01-28 19:53:20 +02:00
chao an
94db8a9414 wireless/ieee80211: update ieee80211 header 
Signed-off-by: chao an <anchao@xiaomi.com>
 2023-01-29 00:34:26 +08:00
Xiang Xiao
c137abf4b0 drivers/wireless: Remove the duplicated bc_bifup check from bcmf_wl_auth_event_handler 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-01-28 11:31:28 -03:00
Petro Karashchenko
8e72b07a62 nuttx: Add missing FAR and CODE 
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2023-01-27 13:23:25 +08:00
chentao9
1e8d9466d6 ref: charge: add support for voltage infomation 
Signed-off-by: chentao9 <chentao9@xiaomi.com>
 2023-01-27 00:40:43 +02:00
丁欣童
63879598fa sensors/fakesensor: fix timestamp is woring when batch. 
Signed-off-by: 丁欣童 <dingxintong@xiaomi.com>
 2023-01-27 00:39:15 +02:00
梁超众
7b8ef5dc1b usrsock: only TCP data should be aggregrated for rpmsg case 
non-streaming socket's rx data should not be aggregrated.

Signed-off-by: 梁超众 <liangchaozhong@xiaomi.com>
 2023-01-27 00:38:32 +02:00
Jiuzhu Dong
5bd448825b driver/sensor: sync set buffer number to remote proc 
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
 2023-01-27 00:37:49 +02:00
Jiuzhu Dong
c9c5940382 driver/sensor: using recursive lock to fix deadlock beacuse rptun reentrancy 
nxsem_wait
/home/neo/projects/monkey/nuttx/arch/arm/src/../../../sched/semaphore/sem_wait.c:155 (discriminator 2)
sem_wait
/home/neo/projects/monkey/nuttx/arch/arm/src/../../../sched/semaphore/sem_wait.c:273
nxmutex_lock
/home/neo/projects/monkey/nuttx/include/nuttx/mutex.h:161
nxrmutex_lock.isra.0
/home/neo/projects/monkey/nuttx/include/nuttx/mutex.h:348
sensor_rpmsg_unsub_handler
/home/neo/projects/monkey/nuttx/arch/arm/src/../../../drivers/sensors/sensor_rpmsg.c:1048
rpmsg_virtio_rx_callback
/home/neo/projects/monkey/nuttx/arch/arm/src/../../../openamp/open-amp/lib/rpmsg/rpmsg_virtio.c:334
virtqueue_notification
/home/neo/projects/monkey/nuttx/arch/arm/src/../../../openamp/open-amp/lib/virtio/virtqueue.c:623
up_block_task
/home/neo/projects/monkey/nuttx/arch/arm/src/common/arm_blocktask.c:82 (discriminator 2)
nxsem_tickwait
/home/neo/projects/monkey/nuttx/arch/arm/src/../../../sched/semaphore/sem_tickwait.c:116
rptun_wait_tx
/home/neo/projects/monkey/nuttx/arch/arm/src/../../../drivers/rptun/rptun.c:522
rpmsg_virtio_wait_tx_buffer
/home/neo/projects/monkey/nuttx/include/openamp/rpmsg_virtio.h:120
sensor_rpmsg_push_event_one
/home/neo/projects/monkey/nuttx/arch/arm/src/../../../drivers/sensors/sensor_rpmsg.c:778
sensor_rpmsg_alloc_stub
/home/neo/projects/monkey/nuttx/arch/arm/src/../../../drivers/sensors/sensor_rpmsg.c:547
sensor_rpmsg_sub_handler
/home/neo/projects/monkey/nuttx/arch/arm/src/../../../drivers/sensors/sensor_rpmsg.c:991
rpmsg_virtio_rx_callback
/home/neo/projects/monkey/nuttx/arch/arm/src/../../../openamp/open-amp/lib/rpmsg/rpmsg_virtio.c:334

Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
 2023-01-27 00:37:49 +02:00
fangzhenwei
8a1489c291 driver/h4:increase h4 uart tx/rx buffer default size 
tx buffer size 1024 to 2048
rx buffer size 1024 to 8096

Signed-off-by: fangzhenwei <fangzhenwei@xiaomi.com>
 2023-01-27 00:27:02 +02:00
xinbingnan
7076de9e8a sensors/bmi160.c: fix the problem Linux SPI doesn't working properly 
CH341A chip only supports SPI MODE0, and BMI160 supports both MODE0 and MODE3. So, changing MODE3 to MODE0 makes all cases available.

Signed-off-by: xinbingnan <xinbingnan@xiaomi.com>
 2023-01-27 00:26:13 +02:00
Petro Karashchenko
e3a8e1e3ef drivers/mtd/mtd_config: switch from semaphore to mutex for exclusive access 
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2023-01-26 10:24:05 +08:00
Petro Karashchenko
6e3cb04531 drivers/sensors/msa301: switch from semaphore to mutex for exclusive access 
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2023-01-26 10:24:05 +08:00
Petro Karashchenko
f952b8456c assert: switch from ASSERT(0/false) to PANIC 
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2023-01-26 10:15:34 +08:00
Xiang Xiao
1280a2a8f9 Launch the initial task through task_spawn instead of nxtask_create 
to share the code with the code path of posix_spawn

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-01-25 23:34:52 +02:00
raiden00pl
30015b862c drivers/foc: add ioctl interface that turn off all PWM switches 2023-01-21 12:28:16 +08:00
raiden00pl
91d43edffd drivers/foc: support for BEMF sensing 2023-01-20 21:26:27 +02:00
Masayuki Ishikawa
dc454765fb Revert "add holder for mutex" 
This reverts commit fc176addeb.
 2023-01-19 06:04:48 +09:00
To Doan Ngoc Hai
6ca75deec8 drivers/can/can.c: Change size_t type printf formatter %d -> %zu 2023-01-18 22:03:17 +08:00
lilei19
fc176addeb add holder for mutex 
Signed-off-by: lilei19 <lilei19@xiaomi.com>
 2023-01-18 17:40:58 +08:00
ligd
5b22eba0bd rptun ping: fix warning when open CONFIG_SYSTEM_TIME64 
rptun/rptun_ping.c: In function 'rptun_ping':
rptun/rptun_ping.c:171:20: error: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'time_t' {aka 'long long int'} [-Werror=format=]
  171 |   syslog(LOG_INFO, "avg: s %" PRIu32 ", ns %ld\n", ts.tv_sec, ts.tv_nsec);
      |                    ^~~~~~~~~~                      ~~~~~~~~~
      |                                                      |
      |

Signed-off-by: ligd <liguiding1@xiaomi.com>
 2023-01-17 10:59:59 +08:00
ligd
354abd4e8e uinput: fix uinput compile failed, if no define CONFIG_UINPUT_TOUCH 
input/uinput.c:81:28: error: field 'lower' has incomplete type
   81 |   struct touch_lowerhalf_s lower;
      |                            ^~~~~
CC:  pipes/pipe.c

Signed-off-by: ligd <liguiding1@xiaomi.com>
 2023-01-17 10:55:52 +08:00
crafcat7
2ec117b3ca fs/fs_fsync:Fix the expected error of socket,fifo and pipe returning error in fsync case 2023-01-17 01:56:40 +08:00
ligd
23d1d4c42a power: avoid sem_wait called in IRQ handler 
error backrace:
_assert  --- assert again
sem_wait
pm_unregister
wdog_notifier
panic_notifier_call_chain
_assert
dataabort

Signed-off-by: ligd <liguiding1@xiaomi.com>
 2023-01-17 01:25:27 +08:00
ligd
38c6f20d17 pm: add pm_domain_lock/unlock support 
Signed-off-by: ligd <liguiding1@xiaomi.com>
 2023-01-17 01:25:27 +08:00
ligd
d2ef505684 pm: add lock for pm_auto_updatestate_cb() 
Signed-off-by: ligd <liguiding1@xiaomi.com>
 2023-01-17 01:25:27 +08:00
Xiang Xiao
a851ad84c3 net: consistent the net sem wait naming conversion 
to prepare the new mutex wait function

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-01-15 12:31:30 -03:00
TimJTi
f5e8c30808 Add ACT8945A power driver 
Update act8945a.c

Update Kconfig

Update act8945a.c

Corrections (xiaoxiang781216)
 2023-01-14 18:49:25 +08:00
liushuai25
ea67dafd93 Fix scope issues with "switch ... case" 
Signed-off-by: liushuai25 <liushuai25@xiaomi.com>
 2023-01-14 13:38:37 +08:00
liushuai25
57295d750d Use C89 compatible initializer and modify code format 
Signed-off-by: liushuai25 <liushuai25@xiaomi.com>

Update drivers/video/mipidsi/mipi_dsi_device.c

Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2023-01-13 23:10:56 +08:00
liushuai25
6b729487fb feat: add mipidsi support 
add mipi dsi subsystem support.

reference links:
https://github.com/torvalds/linux/blob/master/drivers/gpu/drm/drm_mipi_dsi.c
https://github.com/torvalds/linux/blob/master/include/video/mipi_display.h

Signed-off-by: liushuai25 <liushuai25@xiaomi.com>
 2023-01-13 23:10:56 +08:00
Jani Paalijarvi
bd461a1016 drivers/eeprom/i2c_xx24xx.c: Fix compiler warnings 
Debug prints were not able to handle 64bit off_t and size_t.
 2023-01-13 23:08:58 +08:00
Lee Lup Yuen
6de5a862cd drivers/input: Add driver for Goodix GT9XX Touch Panel 
This PR adds the driver for Goodix GT9XX I2C Touch Panel, which will be called by PINE64 PinePhone.

Our driver follows the design of the NuttX Driver for [Cypress MBR3108](https://github.com/apache/nuttx/blob/master/drivers/input/cypress_mbr3108.c).

We have documented our driver here: ["NuttX Touch Panel Driver for PinePhone"](https://lupyuen.github.io/articles/touch2#appendix-nuttx-touch-panel-driver-for-pinephone)

`drivers/input/Kconfig`: Added option `INPUT_GT9XX` to select GT9XX Driver

`drivers/input/Make.defs`: Added GT9XX Driver to Makefile

`drivers/input/gt9xx.c`, `gt9xx.h`: I2C Driver for GT9XX Touch Panel
 2023-01-13 12:19:53 +08:00
zhanghongyu
48c9d10336 net_socket: add accept4 function 
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
 2023-01-11 23:28:08 +08:00
xinbingnan
1ce93a7d9a sensors/bmi160.c: fix i2C read and write behavior 
There is a problem with the original driver reading and writing behavior, refer to the driver of mpu60x0 to make corresponding changes.

Signed-off-by: xinbingnan <xinbingnan@xiaomi.com>
 2023-01-11 21:12:29 +08:00
梁超众
aca1a065a8 move usrsock to kernel space 
Signed-off-by: 梁超众 <liangchaozhong@xiaomi.com>
 2023-01-11 15:14:03 +08:00
chengkai
f864e5f657 wireless/bluetooth: add interrupt_context hander for netsnoop 
Signed-off-by: chengkai <chengkai@xiaomi.com>
 2023-01-10 18:08:22 +08:00
田昕
587305723e drivers/pipe:add PIPEIOC_POLLTHRES to set POLLIN/POLLOUT threshold 
Signed-off-by: 田昕 <tianxin7@xiaomi.com>
 2023-01-10 13:33:13 +08:00
Zhe Weng
5e42bd97cd virtio/net: Try fix virtnet logic 
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
 2023-01-09 10:10:49 +09:00
anjiahao
96ec6983db watchdog:use 'V' to stop watchdog 
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
 2023-01-06 20:02:26 +08:00
yinshengkai
6064aa8bb5 drivers/note: remove choice in Kconfig 
To support multiple note drivers to be used at the same time

Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2023-01-06 16:23:00 +08:00
yinshengkai
2e4c4822eb segger/sysview: add up_perf_freq result chaeck 
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2023-01-06 15:06:15 +08:00
Sebastien Lorquet
af6c990498 add support for more is25 mtd devices 2023-01-06 11:52:37 +08:00
anjiahao
5e878186c7 watchdog:add a callback when painc stop the watchdog 
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
 2023-01-06 10:42:37 +08:00
Xiang Xiao
1a59f4ed00 mm/map: Remove the unnessary map.h inclusion in various drivers 
and Fix include/nuttx/mm/map.h:55:28: error: 'struct task_group_s' declared inside parameter list will not be visible outside of this definition or declaration

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-01-05 16:06:53 +02:00
yinshengkai
8f823ce320 sergger: add note_ prefix to sysview 
change 1: rename sysview.c to note_sysview.c
change 2: add note_ prefix to sysview's public function

Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2023-01-05 22:04:52 +08:00
yinshengkai
77466742c7 drivers/segger: register sysview to note drivers list 
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2023-01-05 22:04:52 +08:00
yinshengkai
4ba7624804 Revert "Sysview add prefix kconfig to add an option to decouple sched_note calls" 
This reverts commit f72f7ebee0.
 2023-01-05 22:04:52 +08:00
yinshengkai
e9ed994fec syslog: merge multiple lib_sprintf into one 
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2023-01-05 02:00:43 +08:00
yinshengkai
74b8776872 syslog: put variable initialization in the front 
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2023-01-05 02:00:43 +08:00
yinshengkai
72b19200b5 syslog: replace the switch statement with an array of strings 
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2023-01-05 02:00:43 +08:00
Xiang Xiao
7179d57026 fs: Check offset and length more carefully in mmap callback 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-01-04 17:43:59 +02:00
Xiang Xiao
b0a0ba3ad7 fs: Move mmap callback before truncate in [file|mountpt]_operations 
since mmap may exist in block_operations, but truncate may not,
moving mmap beforee truncate could make three struct more compatible

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-01-04 17:43:59 +02:00
Xiang Xiao
779a610ca3 Remove the unnecessary NULL fields in global instance definition of file_operations 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-01-04 00:32:13 +02:00
Xiang Xiao
1815f8b731 drivers/note: Add const to g_notelog_ops 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-01-04 00:21:18 +02:00
Xiang Xiao
98ab55ef68 drivers/note: Replace the scritical section with spin_xxx_wo_note 
to avoid to generate the unexpected schedule information

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-01-04 00:21:18 +02:00
zouboan
56c6943311 sensors/mpu60x0: fix build warning about data type 2023-01-03 01:45:56 +08:00
yinshengkai
1cee890aa7 drivers/note: unify the spinlock operation in noteram 
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
 2023-01-02 22:29:01 +08:00