Gregory Nutt
9c9c31eca8
STM32 F7: Fix a few of the many Ethernet compilation issues (still more)
2015-07-19 12:58:41 -06:00
Gregory Nutt
1d3329e6d9
STM32 F7: Quick'n'dirty port of the STM32 F4 Ethernet driver. Does not yet even compile
2015-07-19 12:51:23 -06:00
Gregory Nutt
9908449fca
STM32 F7: Add Ethernet header file
2015-07-19 12:26:13 -06:00
Gregory Nutt
4b9b7589b9
STM32 F7: Add logic to enable I-/D-Cache, ITCM and DTCM
2015-07-19 10:43:26 -06:00
Gregory Nutt
0b581944b9
STM32 F7: Port the STM32 F3 serial driver to the STM32 F7
2015-07-19 09:25:27 -06:00
Gregory Nutt
03cbe4ab93
STM32 F7: Add DMA header files
2015-07-19 07:34:09 -06:00
Gregory Nutt
3f1b6ca415
STM32 F7: Add low level serial console support
2015-07-18 16:24:02 -06:00
Gregory Nutt
1c2966f5ce
STM32 F7: Bring in other EXTI related files from STM32 F4
2015-07-18 16:00:00 -06:00
Gregory Nutt
1fdb504f24
STM32 F7: Add USART/UART register definition
2015-07-18 15:58:59 -06:00
Gregory Nutt
8fa67213c1
STM32 F7: Add heap initializatino logic; Clone the STM32 CCM allocator as the F7 DTCM allocator
2015-07-18 12:52:24 -06:00
Gregory Nutt
5c76329d2e
STM32 F7: Add PWR register definitions
2015-07-18 11:55:35 -06:00
David Sidrane
64869024f3
STM32: Oops. Some STM32 F7 edits accidentally went into STM32 files ;(. Fixed by David Sidrane
2015-07-18 11:05:44 -06:00
Gregory Nutt
fb129fa354
STM32 F7: Add FLASH and SYSCFG header files
2015-07-18 10:06:44 -06:00
Gregory Nutt
d5ebc0ae79
STM32F7: Clone GPIO support from the STM32 F4
2015-07-18 08:34:07 -06:00
Gregory Nutt
36d01979be
STM32 F7: Add RCC clock configuration logic from STM32 F429
2015-07-17 17:39:33 -06:00
Gregory Nutt
07d5b6d5bc
STM32 F7: Fix input clock source to SysTick
2015-07-17 16:38:47 -06:00
Gregory Nutt
7af567b9e2
STM32F7: Add GPIO header files
2015-07-17 15:43:51 -06:00
Gregory Nutt
dac4a67c7b
STM32 F7: Add RCC header files
2015-07-17 13:52:10 -06:00
Gregory Nutt
1db902d135
STM32 RCC: Fix some more typos in STM32 RCC header files
2015-07-17 12:16:29 -06:00
Gregory Nutt
b86214ff77
STM32 RCC: Fix what looks like a double paste
2015-07-17 12:00:46 -06:00
Gregory Nutt
a314561474
STM32F746G-DISCO: Getting closer to a build
2015-07-17 11:47:16 -06:00
Sebastien Lorquet
b5016f3a7f
gethostbyname() and gethostbyname_r() should be built even if there is no host file support. From Sebastien Lorquet
2015-07-17 09:43:28 -06:00
Sebastien Lorquet
4eec7041fc
Move definition of h_errno from lib_parsehostfile.c to lib_netdb. h_errno should still be defined even if there is no host file support. From Sebastien Lorquet.
2015-07-17 09:39:45 -06:00
Gregory Nutt
cb5a3bd84d
Fix error in Kconfig of previous change: Can't mix tabs and spaces in help text
2015-07-17 08:31:21 -06:00
Gregory Nutt
2a2e9fa56a
gethostbyname_r: Fix test of return value from inet_pton(). Zero does not mean success
2015-07-17 08:24:21 -06:00
Gregory Nutt
0aefd55383
Update ChangeLog
2015-07-17 07:46:40 -06:00
Sebastien Lorquet
cc1b108d71
Extend STM32 Ethernet operating frequency to 180MHz:
...
-Extend frequency range options to 180 MHz for STM32 ETH_MACMIIA_CR
-Fix a typo in a frequency range option in LPC43
-Only configure the PPS GPIO if the PTP protocol is enabled
From Sebastien Lorquet
2015-07-17 07:44:12 -06:00
Gregory Nutt
652371c919
Add CONFIG_NETDEV_LATEINIT that can be used to suppress calls to up_netinitialize() from early initialization
2015-07-17 07:20:16 -06:00
Gregory Nutt
50897b7a64
STM32 F7: Misc naming fixes
2015-07-16 19:49:20 -06:00
Gregory Nutt
55cbf843b8
STM32 F7: Add more configuration selections
2015-07-16 18:30:40 -06:00
Gregory Nutt
1f54e92658
STM32 F7: Add pin multiplexing definitions
2015-07-16 16:31:02 -06:00
Gregory Nutt
27f6509022
Add initial support for the STM32 F7 Discovery board
2015-07-16 11:43:25 -06:00
Gregory Nutt
6a15aef38f
Add include/chip.h definitions and configuration support for the STM32 F7
2015-07-16 08:47:25 -06:00
Gregory Nutt
bf1adc1e55
Another CAN driver fix: From inspection, it appears that RTR counter was not being handled correctly
2015-07-15 19:52:08 -06:00
Gregory Nutt
f41df38b0b
More CAN driver fixes: remove and unused semaphore. Looks to me that waiter counts are not being initialized
2015-07-15 19:27:36 -06:00
Gregory Nutt
048d338808
Another oops. I introduced a but in a previous commit. The CAN read method nees to return an error if sem_wait() fails for any reason
2015-07-15 18:51:31 -06:00
Gregory Nutt
621fef2c31
Some trivial clean up associated with the last commit
2015-07-15 18:43:53 -06:00
Gregory Nutt
320c584888
CAN driver: Fix a problem where the rx_sem count can grow without bounds
2015-07-15 18:20:08 -06:00
Gregory Nutt
38dee32fdc
Add STM32 F7 memory map header file
2015-07-15 16:24:03 -06:00
Gregory Nutt
b7fb157c94
STM32F7: Bring over a couple more Cortex-M7 files from SAMV7
2015-07-15 14:51:41 -06:00
Gregory Nutt
966e0a7d78
Create a src directory for the STM32F7 (not much in it yet)
2015-07-15 14:32:28 -06:00
Gregory Nutt
e0a3c55cda
STM32: Move STM32F42xxx IRQ definitions out of stm32f40xxx_irq.h into their own stm32f42xxx_irq.h header file
2015-07-15 13:52:20 -06:00
Alan Carvalho de Assis
d7d15072c4
Updated SSD1306 driver
2015-07-15 13:28:31 -06:00
Gregory Nutt
e832ebdd23
STM32: Fix a minor error in new STMF42* header files
2015-07-15 13:21:39 -06:00
Gregory Nutt
5ec1ff185d
STM32: Move STM32F42xxx vector definitions out of stm32f40xxx_vector.h into their own stm32f42xxx_vector.h header file
2015-07-15 13:02:55 -06:00
Gregory Nutt
b9a31ebcf0
STM32: Move STM32F42xxx SYSCFG definitions out of stm32f40xxx_syscfg.h into their own stm32f42xxx_syscfg.h header file
2015-07-15 12:54:15 -06:00
Gregory Nutt
1aa901b31a
STM32: Move STM32F42xxx RCC definitions out of stm32f40xxx_rcc.h into their own stm32f42xxx_rcc.h header file
2015-07-15 12:50:04 -06:00
Gregory Nutt
403dd4c3c9
STM32: Move STM32F42xxx DMA definitions out of stm32f40xxx_dma.h into their own stm32f42xxx_dma.h header file
2015-07-15 12:38:33 -06:00
Gregory Nutt
538e0aa989
STM32: Move STM32F42xxx pinmap definitions out of stm32f40xxx_pinmap.h into their own stm32f42xxx pinmap.h header file
2015-07-15 12:28:45 -06:00
Gregory Nutt
8580d37352
SSD1306: Rename ssd1306_helpers.h to ssd1306.h. Move all SSD1306 driver definitions from ssd1306_base.c to ssd1306.h
2015-07-15 11:46:28 -06:00
