Summary:
- I noticed that device discovery for virtio-mmio devices does not
work without bus=virtio-mmio-bus.x option. Without this option,
qemu assigns the virtio device into the virtio-mmio space
in reverse order automatically.
- To fix this issue, we must specify the correct numbers for the
target machines. (i.e. arm32/64->32, rv32/64->8)
Impact:
- None
Testing:
- Tested with qemu-7.2.4
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
1. virtio devics/drivers match and probe/remote mechanism;
2. virtio mmio transport layer based on OpenAmp (Compatible with both
virtio mmio version 1 and 2);
3. virtio-serial driver based on new virtio framework;
4. virtio-rng driver based on new virtio framework;
5. virtio-net driver based on new virtio framework
(IOB Offload implementation);
6. virtio-blk driver based on new virtio framework;
7. Remove the old virtio mmio framework, the old framework only
support mmio transport layer, and the new framwork support
more transport layer and this commit has implemented all the
old virtio drivers;
8. Refresh the the qemu-arm64 and qemu-riscv virtio related
configs, and update its README.txt;
New virtio-net driver has better performance
Compared with previous virtio-mmio-net:
| | master/-c | master/-s | this/-c | this/-s |
| :--------------------: | :-------: | :-------: | :-----: | :-----: |
| qemu-armv8a:netnsh | 539Mbps | 524Mbps | 906Mbps | 715Mbps |
| qemu-armv8a:netnsh_smp | 401Mbps | 437Mbps | 583Mbps | 505Mbps |
| rv-virt:netnsh | 487Mbps | 512Mbps | 760Mbps | 634Mbps |
| rv-virt:netnsh_smp | 387Mbps | 455Mbps | 447Mbps | 502Mbps |
| rv-virt:netnsh64 | 602Mbps | 595Mbps | 881Mbps | 769Mbps |
| rv-virt:netnsh64_smp | 414Mbps | 515Mbps | 491Mbps | 525Mbps |
| rv-virt:knetnsh64 | 515Mbps | 457Mbps | 606Mbps | 540Mbps |
| rv-virt:knetnsh64_smp | 308Mbps | 389Mbps | 415Mbps | 474Mbps |
Note: Both CONFIG_IOB_NBUFFERS=64, using iperf command, all in Mbits/sec
Tested in QEMU 7.2.2
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
VELAPLATFO-12536
This provides the initial hooks for Flattened Device Tree support
with QEMU RV. It also provides a new procfs file that exposes the
fdt to userspace much like the /sys/firmware/fdt endpoint in Linux.
See https://www.kernel.org/doc/Documentation/ABI/testing/sysfs-firmware-ofw
Nodes in the fdt are not yet usable by the OS.
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
Signed-off-by: liaoao <liaoao@xiaomi.com>
Summary:
- I noticed that virtio-blk and FAT are not enabled for some
virt configurations.
- This commit enables them for testing.
Impact:
- None
Testing:
- Tested with qemu-7.1
- NOTE: file copy with rv-virt:knetnsh64 is sometimes unstable.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
There is currently a big problem in the address environment handling which
is that the address environment is released too soon when the process is
exiting. The current MMU mappings will always be the exiting process's, which means
the system needs them AT LEAST until the next context switch happens. If
the next thread is a kernel thread, the address environment is needed for
longer.
Kernel threads "lend" the address environment of the previous user process.
This is beneficial in two ways:
- The kernel processes do not need an allocated address environment
- When a context switch happens from user -> kernel or kernel -> kernel,
the TLB does not need to be flushed. This must be done only when
changing to a different user address environment.
Another issue is when a new process is created; the address environment
of the new process must be temporarily instantiated by up_addrenv_select().
However, the system scheduler does not know that the process has a different
address environment to its own and when / if a context restore happens, the
wrong MMU page directory is restored and the process will either crash or
do something horribly wrong.
The following changes are needed to fix the issues:
- Add mm_curr which is the current address environment of the process
- Add a reference counter to safeguard the address environment
- Whenever an address environment is mapped to MMU, its reference counter
is incremented
- Whenever and address environment is unmapped from MMU, its reference
counter is decremented, and tested. If no more references -> drop the
address environment and release the memory as well
- To limit the context switch delay, the address environment is freed in
a separate low priority clean-up thread (LPWORK)
- When a process temporarily instantiates another process's address
environment, the scheduler will now know of this and will restore the
correct mappings to MMU
Why is this not causing more noticeable issues ? The problem only happens
under the aforementioned special conditions, and if a context switch or
IRQ occurs during this time.
Summary:
- This commit adds knetnsh64 and knetnsh64_smp
Impact:
- None
Testing:
- Tested with ping, telnet and iperf on QEMU-7.1
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit updates README.txt regarding how to build kernel
and apps for BUILD_KERNEL
- Also update on parallel build for BUILD_FLAT
Impact:
- None
Testing:
- Tested with qemu-7.1.0
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit adds ksmp64 configuration to test BUILD_KERNEL+SMP
- NOTE: README.txt has been updated
Impact:
- None
Testing:
- Tested with QEMU 6.2
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit adds hostfs support to nsh and nsh64 defconfigs
Impact:
- None
Testing:
- Tested with qemu-6.2
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Enable this option to optimization the unused input sections with the
linker by compiling with " -ffunction-sections -fdata-sections ", and
linking with " --gc-sections ".
Signed-off-by: chao.an <anchao@xiaomi.com>
Follow: http://glennastory.net/boot/sysinit.html
This is first script that init runs is rc.sysinit. This
script does serval initialization tasks about basic service.
The boot sequence currently provided to the board level is:
board_earlyinitialize->
board_lateinitialize(Peripherals driver, core driver, ...)->
run rcS script(mount fs, run service) ->
board_appinitialize->
After this patch:
The boot sequence currently provided to the board level is:
board_earlyinitialize->
board_lateinitialize(core driver,...)->
run rc.sysinit script(mount fs, run core service) ->
board_appinitialize(Peripherals driver)->
run rcS script(run other service)->
So, Peripheral drivers can do more with the file system and
core services.
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
