When creating the next chain of directory entries, (1) add the position
of next entry to the current sector, and then (2) update the sector of
next entry. If the power is turned off between (1) and (2), the next
entry will not be found, and the chain of directory entries will break.
It causes the SmartFS file system corruption, and we will not be able
to add files.
To avoid this issue, in checking the filesystem by smart_fsck_directory,
if the sector of next entry does not exist, update the sector of
directory entry to invalidate the field of next entry.
since emergstream always call syslog_force, but syslog_force is designed
for the interrupt context, and then doesn't mean any emergency thing.
On the other hand, emergstream has other bad side effect:
1.Can't output to file or dev channel
2.Can't work well with the interrupt buffer
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
specified the name of remote proc(rpmsg server)
Change-Id: I0086bb43727a2bbb5e68f88907b5e4608182ef9c
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
N/A
specified the name of remote proc(rpmsg server)
Change-Id: Ie270d651071e87a40a80ab489597ae18db9814f0
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
since the console is normally opened three time as stdin, stdout and
stderr and remove the dependence on STANDARD_SERIAL because other type
of serial drivers also support the poll through the same codebase.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ie68322c4647cc838b295491329969869d6ba310b
This is addressing an issue where Rx interrupts were not restored for
cdcacm after the buffer had been filled (in a burst).
The Rx interrupts were only restored after the watchdog timeout of 200ms
fired.
This happened because CONFIG_SERIAL_RXDMA was set, however, for the
cdcacm driver this does not actually matter as it is relying on
uart_enablerxint to be called via the ops table.
This patch makes sure that uart_enablerxint and uart_disablerxint are
always called, independent of CONFIG_SERIAL_RXDMA, relying on the ops
table to be correct for the case where it should be only a no-op.
Summary:
- When sending an AT command during receiving a bulk packet,
the bulk packet might be put in the AT command response.
- To handle such the case, gs2200m_send_cmd2() is newly
introduced instead of using gs2200m_send_cmd(dev, cmd, NULL)
Impact:
- All use cases that send an AT command in gs2200m.c
Testing:
- Tested with renew and nxplayer with spresense:wifi
Reported-by: Masatoshi Ueno <Masatoshi.Ueno@sony.com>
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Removes the family identifier from the device configuration, since the device
family is already part of the rom code and the underlying logic does know how
to extract this information.
include/nuttx/1wire drivers/sensors
stm32f103-minimim
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
The following changes where added.
- Removes dependency to slave structure. Selecting a device on the bus only
requires the unique romcode.
- Make search operation mutual exclusive on the bus. This is necessary to
prevent another driver instance from making a transition on the bus at
the same time.
- Skip also rom when only 1 slave is expected on the bus. Physical
connected devuce should be indicated by the maxslave paramter during
initializing, not the reigstered slaves.
- Fixes some compiler warnings in existing ds28e17 driver.
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
Summary:
- When receiving a UDP packet partially, the rest of the packet
must be discarded.
Impact:
- None
Testing:
- Tested with a UDP sample program
Reported-by: Masatoshi Ueno <Masatoshi.Ueno@sony.com>
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Ken Pettit has submitted the ICLA and we can migrate the licenses
to Apache.
Sebastien Lorquet has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This adds a sensor driver for the hyt271, hyt221, and hyt939 sensor module from
vendor iST (Innovative Sensor Technology). This sensor type is connected via i2c
bus and allows the measurement of relative humidity and temperature.
Each driver instance supports two different character device for each type
(/dev/sensor/tempX and /dev/sensor/humiX).
This driver also supports changing the i2c address of one connected sensor on
the bus. This requires a callback to the platform-specific board logic which
must ensure a power-on reset.
Optional the driver allows setting up a read interval for fetching sensor data.
This is done by a worker thread and can be useful when watching several sensors
via poll() by the userspace application.
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
MIRTOS4BES-22
since -ENOTTY is an expected code to indicate IOCTL isn't supported
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I62cf58c514be696327ad769ab2f35099154bcb42
Marco Krahl has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt, S.A has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This change makes it so that the timeout is set as part of the SDIO_WAITENABLE call instead of the SDIO_EVENTWAIT call. By doing so, you eliminate all opportunity for a race condition.
stm32h7:sdmmc Check if busy ended early
Ales Verbic has submitted the ICLA and we can migrate the licenses
to Apache.
Uros Platise has submitted the ICLA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
