sim/rpserver
NuttShell (NSH) NuttX-12.0.0
server> cu
_assert: Current Version: NuttX server 12.0.0 3ead669e7a-dirty Feb 2 2023 23:53:48 sim
_assert: Assertion failed : at file: libs/libc/misc/lib_mutex.c:303 task: cu 0x5662fff4
Signed-off-by: chao an <anchao@xiaomi.com>
NuttX kernel should not use the syscall functions, especially after
enabling CONFIG_SCHED_INSTRUMENTATION_SYSCALL, all system functions
will be traced to backend, which will impact system performance.
Signed-off-by: chao an <anchao@xiaomi.com>
First configure nuttx to support ipv4 and ipv6 dual stack,
then start two simulators and run Iperf ipv4 udp speed test,
unaligned access exception to sockaddr_in occours.
The root cause is that struct sockaddr_storage isn't set to
the desired alignment.
Signed-off-by: luojun1 <luojun1@xiaomi.com>
Here is a case how to use arg:
If application need do the ADC conversion as the same frequency and phase
of PWM, he can pass a semaphore as arg and then PWM driver will post the
semaphore in he start point of every period.
Signed-off-by: zhangchengqi <zhangchengqi@xiaomi.com>
dbus/dbus/dbus-pollable-set-epoll.c:258:18: error: ‘EPOLLET’ undeclared
(first use in this function); did you mean ‘EPOLLERR’?
258 | event.events = EPOLLET;
| ^~~~~~~
| EPOLLERR
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
This is preparation for moving address environments out of the group
structure into the tcb.
Why move ? Because the group is destroyed very early in the exit phase,
but the MMU mappings are needed until the context switch to the next
process is complete. Otherwise the MMU will lose its mappings and the
system will crash.
continue the follow work:
commit 43e7b13697
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Sun Jan 22 19:31:32 2023 +0800
assert: Log the assertion expression in case of fail
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
ptrdiff_t is defined as intptr_t that is defined as _ssize_t in Nuttx.
The real size depends on architecture and the PTR_MAX and PTR_MIN is
specified by it.
the application can access the remote cpu touch driver by
rpmsgdev, so the defines and struct will be used even if not
enable the CONFIG_INPUT/CONFIG_INPUT_TOUCHSCREEN.
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
in user space
Use the flag (COP_FLAG_UPDATE)structure member to mark
whether it is just input data.
like this:
can do manys times,just input data
....
cryp.ses = session.ses;
cryp.op = COP_ENCRYPT;
cryp.src = (caddr_t) s;
cryp.len = len;
cryp.flags = COP_FLAG_UPDATE;
cryp.dst = 0;
cryp.mac = (caddr_t) out;
cryp.iv = 0;
if (ioctl(cryptodev_fd, CIOCCRYPT, &cryp) == -1)
{
warn("CIOCCRYPT");
goto err;
}
can do manys times like frist...
then,the last time
Don't use any flay structure member to mark
this is last time,need get final result
....
cryp.ses = session.ses;
cryp.op = COP_ENCRYPT;
cryp.src = (caddr_t) s;
cryp.len = len;
cryp.flags = 0;
cryp.dst = 0;
cryp.mac = (caddr_t) out;
cryp.iv = 0;
if (ioctl(cryptodev_fd, CIOCCRYPT, &cryp) == -1)
{
warn("CIOCCRYPT");
goto err;
}
....
that will get last result.
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
This PR adds the existing Goodix GT9XX Touch Panel Driver to the Bringup Function for PINE64 PinePhone.
With this PR, LVGL Touchscreen Apps will respond to Touch Input on PinePhone.
### Modified Files
`boards/arm64/a64/pinephone/src/pinephone_bringup.c`: Added GT9XX Touch Panel Driver to PinePhone Bringup Function
`boards/arm64/a64/pinephone/src/Makefile`: Added `pinephone_touch.c` to the Makefile
`include/nuttx/input/gt9xx.h`: Fixed a comment in GT9XX Touch Panel Driver
### New Files
`boards/arm64/a64/pinephone/src/pinephone_touch.c`, `pinephone_touch.h`: Register GT9XX Touch Panel Driver on PinePhone
`boards/arm64/a64/pinephone/configs/lvgl/defconfig`: Added PinePhone Board Config `lvgl` to support LVGL Touchscreen Apps
### Updated Documentation
`Documentation/platforms/arm/a64/boards/pinephone/index.rst`: Added PinePhone Board Config `lvgl` for LVGL Touchscreen Apps
The memalign is special to multiple mempool because multiple mempool
doesn't support split and shrink chunk operate. So When you alloc a
memory block and find an aligned address in this block, you need to
occupy 8 bytes before the address to save the address of the padding
size and pool to ensure correct use in realloc and free operations.
So we will use bit1 in the previous address of the address to represent
that it is applied by memalign.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
This delta describes the relationship between the block size of each
mempool in multiple mempool by user initialized. It is automatically
detected by the mempool_multiple_init function. If the delta is not
equal to 0, the block size of the pool in the multiple mempool is an
arithmetic progressions, otherwise it is an increasing progressions.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
Let's specify size instead of number, so that we can unify the size of
expansion memory in the multiple mempool.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
the crash backtrace:
kasan_report (addr=0xf3d02fd4, size=4, is_write=false) at
kasan/kasan.c:106
0x5658518d in __asan_loadN_noabort (addr=0xf3d02fd4, size=4) at
kasan/kasan.c:300
0x565851ee in __asan_load4_noabort (addr=0xf3d02fd4) at
kasan/kasan.c:334
0x56580b02 in sq_remfirst (queue=0xf3d02b08) at
queue/sq_remfirst.c:45
0x565e0e0b in mempool_alloc (pool=0xf3d02aec) at
mempool/mempool.c:161
0x566033d2 in mempool_multiple_alloc (mpool=0xf3d02a30, size=16) at
mempool/mempool_multiple.c:147
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
- Also remove the nuttx private shm.h file nuttx/mm/shm.h, which became redundant
- Also remove the gran allocator initialization/release in binfmt since common
vpage allocator is initialized in group_create/group_leave
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
The dependency should be vice versa; the MM_SHM should depend on the
existence of the virtual memory range allocator.
Create a new CONFIG flag CONFIG_ARCH_VMA_MAPPING, which will define that
there is a virtual memory range allocator. Make MM_SHM select that flag
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Replace static gs_vaddr with a new dynamic mapping list. Collecting all
this kind of virtual memory mappings into a single structure makes
things more consistent.
This still leaves the task group specific granule alloocator, gs_handle,
in the task group
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
The task_group specific list can be used to store information about
mmappings.
For a driver or filesystem performing mmap can also enable munmap by
adding an item to this list using mm_map_add(). The item is then
returned in the corresponding munmap call.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
and Fix include/nuttx/mm/map.h:55:28: error: 'struct task_group_s' declared inside parameter list will not be visible outside of this definition or declaration
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
change 1: rename sysview.c to note_sysview.c
change 2: add note_ prefix to sysview's public function
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
since mmap may exist in block_operations, but truncate may not,
moving mmap beforee truncate could make three struct more compatible
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
ECG sensors usually output some status info besides ECG data, such as lead and fast-recovery status. Thus a new member "status" is added into sensor_ecg struct.
Signed-off-by: liucheng5 <liucheng5@xiaomi.com>
- Add mmap into file_operations and remove it from ioctl definitions.
- Add mm_map structure definitions to support future unmapping
- Modify all drivers to initialize the operations struct accordingly
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
- Add truncate into file_operations
- Move truncate to be common for mountpt_operations and file_operations
- Modify all drivers to initialize the operations struct accordingly
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
The pw_gecos field is not specified in POSIX, but is
present on most implementations.
passwd file format:
name:uid:gid:gecos:dir:shell
ex: gdm❌127:133:Gnome Display Manager:/var/lib/gdm3:/bin/false
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
When the signal sent by the sender is blocked in the target task,
if the target task has an action registered with sa_flags SA_KENELHAND,
it will directly respond to the action in the context of the sender.
When the action is executed, it will have the parameters set by the
target task with sigaction:sa_user.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
