Gregory Nutt
98f431d8d8
net/: Run all .c files under net/ through tools/nxstyle and fix all resulting complaints.
2020-01-11 13:41:33 -03:00
Xiang Xiao
5c5c08efcd
network: simplify the timeout process logic
...
1.Consolidate absolute to relative timeout conversion into one place(_net_timedwait)
2.Drive the wait timeout logic by net_timedwait instead of devif_timer
This patch help us remove devif_timer(period tick) to save the power in the future.
Change-Id: I534748a5d767ca6da8a7843c3c2f993ed9ea77d4
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-01-11 08:24:49 -06:00
Xiang Xiao
6a3c2aded6
Fix wait loop and void cast ( #24 )
...
* Simplify EINTR/ECANCEL error handling
1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx
* Unify the void cast usage
1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
2020-01-02 10:54:43 -06:00
Gregory Nutt
66ef6d143a
This commit adds an initial implemented of TCP delayed ACKs as specified in RFC 1122.
...
Squashed commit of the following:
net/tmp: Rename the unacked field of the tcp connection structure to tx_unacked. Too confusing with the implementation of delayed RX ACKs.
net/tcp: Initial implementation of TCP delayed ACKs.
net/tcp: Add delayed ACK configuration selection. Rename tcp_ack() to tcp_synack(). It may or may not send a ACK. It will always send SYN or SYN/ACK.
2019-12-08 13:13:51 -06:00
Gregory Nutt
3b275fcf4e
net/: Run nxstyle against all C files.
2019-10-25 11:31:42 -06:00
Gregory Nutt
a52ceac13e
net/: Now handles reception of IPv4 packets with larger IPv4 headers containing options.
2019-08-31 12:25:30 -06:00
zhangyuan7
b33fc302f0
net/inet and net/tcp: Fix tcp close flow; free the connection after all tcp close process finished.
2019-08-30 06:44:43 -06:00
Gregory Nutt
1346f29151
net/: Fix alignment and spacing problems found by tools/nxstyle.
2019-07-02 18:02:23 -06:00
Gregory Nutt
f6b00e1966
tools/nxstyle.c: Fix logic error that prevent detecion of '/' and '/=' as operators. net/: Minor updates resulting from testing tools/nxstyle.
2019-03-11 12:48:39 -06:00
Gregory Nutt
42a018747e
net/devif, net/tcp, and net/udp: Extend the logic of 6c0ab0e077
so that all support Transport protocols support by IPv6 can handle the presence of IPv6 header extension options.
2018-11-02 17:50:01 -06:00
Sakari Kapanen
f185c79ea6
nuttx/net/tcp/tcp_input.c: Fix recovery when ackseq > unackseq. The comment near this line says "reset the number of outstanding, unacknowledged bytes". However, the code actually resets the whole TCP connection. It was changed to the current form in commit f034d84ea1
with no explanation of the intent. Recover the line to what it was before that commit.
2018-10-24 09:10:56 -06:00
Gregory Nutt
715d561c41
Trivial spelling corrections in comments; update some comments in a Kconfig file.
2018-06-24 15:01:49 -06:00
Gregory Nutt
433f29eea2
net/: Rename CONFIG_TCP_REASSEMBLY to CONFIG_IPv4_REASSEMBLY. Add some fixes to get a clen compile with CONFIG_IPv4_REASSEMBLY enabled. There are several problems with the current implementation: It is untested (and depends on CONFIG_EXPERMIMENTAL). It uses some Ethernet specific definitions (and depends on CONFIG_NET_ETHERNET). There is only a single reassembly buffer. The last two issues prevent use of this feature in any context where IPv4 packets may be reassembled for multiple network devices concurrently).
2018-06-24 12:06:12 -06:00
Gregory Nutt
b54ffe858a
Standardization of some function headers.
2018-03-13 09:52:27 -06:00
Gregory Nutt
ae399b9b62
net/tcp: In tcp_input(), add the logic to detect, decode, and respond to TCP Keep-Alive packets. In tcp_timer(), fix some problems with the way that TCP Keep-Alive probes were being formatted.
2018-03-12 15:54:45 -06:00
Gregory Nutt
251924a734
Squashed commit of the following:
...
net/tcp: Add logic to send probes when SO_KEEPALIVE is enabled.
net/tcp: TCP socket should not have to be connected to configure KeepAlive.
net/: Add a separate configuration to enable/disable KEEPALIVE socket options.
net/tcp: Arguments to TCP keep-alive timing functions probably should be struct timeval as are the times for other time-related socket options.
net/tcp: Fix a backward conditional
net/tcp: Add some more checks and debug output to TCP-protocol socket options.
net/tcp: Cosmetic changes to some alignment.
net/: Adds socket options needed to manage TCP-keepalive and TCP state machine logic to detect if that the remote peer is alive. Still missing the timer poll logic to send the keep-alive probes and the state machine logic to respond to probes.
2018-03-12 10:59:46 -06:00
Gregory Nutt
7cf88d7dbd
Make sure that labeling is used consistently in all function headers.
2018-02-01 10:00:02 -06:00
Gregory Nutt
0b2a4eb4bd
Networking: A little more wording changes related to interrupts vs. events
2017-08-29 15:08:38 -06:00
Gregory Nutt
88a87f8e3f
6LoWPAN: The original, Contiki-based design used only a single buffer for reassemblying larger packets. This could be a problem issue for hub configurations which really need the capability concurrently reassemble multiple incoming streams concurrently. These was also a design issue in that the reassembly buffer could be corrupted by outgoing packets. The design was extended to support multiple reassembly buffers, each associated with the reassembly tag and source address. This assures that there can be be no corruption of the reassembly once it has started.
2017-08-26 10:00:47 -06:00
Gregory Nutt
8d81b35c44
network: Correct some issues that prevent TCP from working correctly when both IPv4 and IPv6 are enabled.
2017-07-07 08:50:01 -06:00
Gregory Nutt
5a8668b362
6LoWPAN TCP: Fix more ACK handling, fix some callback flag settings. Now the TCP test appears fully functional on 6LoWPAN.
2017-06-25 13:00:42 -06:00
Gregory Nutt
96af668ab8
6LoWPAN: Handle case where the local address is zero (listen socket)
2017-06-24 11:57:59 -06:00
Gregory Nutt
01b0a56371
TCP: tcp_input() now receives IP domain as an input parameter vs. deriving from the IP header length.
2017-05-25 08:02:08 -06:00
Masayuki Ishikawa
32a638cdfe
TCP: Fix tcp_findlistner() in dual stack mode
...
Signed-off-by: Masayuki Ishikawa <masayuki.ishikawa@gmail.com>
2017-05-25 16:54:19 +09:00
Gregory Nutt
56c8456ff0
Update some comments.
2017-05-16 07:38:57 -06:00
Gregory Nutt
914c5dad0c
TCP: An RST recevied suring the 3-way handshake requires a little more clean-up
2017-05-15 08:10:43 -06:00
Gregory Nutt
aa57fb159d
TCP: Send RST if applicaiton 'unlistens()' before we complete the connection sequence.
2017-05-14 13:30:59 -06:00
Gregory Nutt
8acfea1197
Fix some typos
2017-05-14 12:14:31 -06:00
Gregory Nutt
d339ba9e0e
TCP: Fix some potential error conditions that could result from deferring the connection until the full 3-way handshake has completed.
2017-05-14 10:56:25 -06:00
Simon Piriou
8dc7f6d79e
tcp: wait for 3-Way Handshare before accept() returns
2017-05-14 09:08:32 -06:00
Gregory Nutt
76406af71b
6loWPAN: Add support for sendto()
2017-04-02 11:15:46 -06:00
Gregory Nutt
d40a473f72
Without lowsyslog() *llwarn() is not useful. Eliminate and replace with *warn().
2016-06-20 09:37:08 -06:00
Jakub Łągwa
338b915008
While working with version 7.10 I discovered a problem in TCP stack that could be observed on high network load. Generally speaking, the problem is that RST flag is set in unnecessary case, in which between loss of some TCP packet and its proper retransmission, another packets had been successfully sent. The scenario is as follows: NuttX did not receive ACK for some sent packet, so it has been probably lost somewhere. But before its retransmission starts, NuttX is correctly issuing next TCP packets, with sequence numbers increasing properly. When the retransmission of previously lost packet finally succeeds, tcp_input receives the accumulated ACK value, which acknowledges also the packets sent in the meantime (i.e. between unsuccessful sending of lost packet and its proper retransmission). However, variable unackseq is still set to conn->isn + conn->sent, which is truth only if no further packets transmission occurred in the meantime. Because of incorrect (in such specific case) unackseq value, few lines further condition if (ackseq <= unackseq)is not met, and, as a result, we are going to reset label.
2016-06-20 06:55:29 -06:00
Gregory Nutt
7d0950bb22
net/: Change some nerr() ERRORS to nwarn() WARNINGS. Anomolous network events are not errors.
2016-06-12 07:09:37 -06:00
Gregory Nutt
f4fcdcdb4d
net/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition.
2016-06-11 17:37:21 -06:00
Gregory Nutt
e99301d7c2
Rename *lldbg to *llerr
2016-06-11 14:55:27 -06:00
Gregory Nutt
fc3540cffe
Replace all occurrences of vdbg with vinfo
2016-06-11 11:59:51 -06:00
Gregory Nutt
c98f00a93b
Update comments; trivial addtion to a document.
2016-06-10 09:36:59 -06:00
Gregory Nutt
4f208600aa
Replace confusing references to uIP with just 'the network'
2016-05-30 09:31:44 -06:00
Gregory Nutt
4639cdd894
TCP timeouts: Fix some logic when there are multiple network interfaces. In this case, TCP timeout events can really only being processed when the poll from the correct device is received.
2016-03-20 08:19:00 -06:00
Gregory Nutt
2c95fef501
Remove some empty code section comments
2016-02-26 07:35:55 -06:00
Gregory Nutt
0fb035f76b
Standardize some naming in code section comments
2016-02-21 18:09:04 -06:00
Gregory Nutt
6209c51206
net/: More clean-up of spacing/alignment issues
2015-10-08 15:10:04 -06:00
Gregory Nutt
cb9e27c3b0
Standardize naming used for public data and function groupings
2015-10-02 16:30:35 -06:00
Gregory Nutt
d6c3ed1c6f
Networking: Fixes an important TCP bug: 16-bit flags was being converted to 8-bits in a few locations, causing loss of status indications
2015-05-27 17:17:42 -06:00
Gregory Nutt
2c251d845c
include/net/if.h: Add a bit to the device flags to indicate if the device packet buffer holds an IPv4 or an IPv6 domain packet. Set/clear the flag along with the correct offset to the application payload data as each packet is received.
...
net/socket, net/tcp, net/udp: Add logic to select the domain of the outputgoing packet before sending any UDP or TCP packet. This sets the bit to indicate the IPv4 or IPv6 domain and the correct offset to the output going payload data.
2015-01-17 07:42:09 -06:00
Gregory Nutt
88a0e82934
Networking: Remove field d_sndata from the device structure. It is the same as d_appdata and unnecessary
2015-01-17 05:59:13 -06:00
Gregory Nutt
8f8259a0d6
Networking: UDP and TCP MSS depends on the IP header size (as well as the link layer header size) and cannot be represented with a single value.
2015-01-16 15:03:10 -06:00
Gregory Nutt
630366272a
Networking: Seperate tcp_input() and udp_input() into seprate functions tcp_ipv4_input(), tcp_ipv6_input(), udp_ipv4_input(), and upd_ipv6_input() than can deal will the data offsets caused by the differing sizes of the IP header.
2015-01-15 15:06:46 -06:00
Gregory Nutt
a7ce1279f9
Networking: (1) Copied all ICMP sources files to net/icmpv6 with proper renaming and removal of IPv4 logic, (2) remove IPv6 logic from files in net/icmp, (3) copied include/nuttx/icmp.h to icmpv6.h and removed IPv4 specific logic, (4) removed all IPv6 logic from icmp.h, (5) IP_HDRLEN became IPv4_HDRLEN and IPv6_HDRLEN, (6) ip_chksum() became ipv4_chksum() and ipv6_chksum(), and (7) added partial support for ICMPv6 statistics.
2015-01-14 16:10:38 -06:00