sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
25,998 Commits 1 Branch 0 Tags 291 MiB
a0980c610b
Commit Graph

25998 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Gregory Nutt
a308ea553b Remove some excessive, redundant debug info per request of antin Berezenko. See Issue #8. 2016-06-14 15:50:23 -06:00
Gregory Nutt
a97d8378c9 Remove some excessive, redundant debug info per request of antin Berezenko 2016-06-14 15:48:40 -06:00
Gregory Nutt
c384f33ac9 Update ChangeLog 2016-06-14 13:24:28 -06:00
Frank Benkert
573b1d415c * SAMV7: SPI: SPI-Freq. 40MHz; VARSELECT; hw-features 
This change adds the following improvements:
  - Increase the allowed SPI-Frequency from 20 to 40 MHz.
  - Correct and rename the "VARSELECT" option This option was included in the code as "CONFIG_SPI_VARSELECT" but nowhere  defined in a Kconfig file. The patch renames it to "CONFIG_SAMV7_SPI_VARSELECT" and corrects the implementation according the datasheet of Atmel. In short, this option switches the processor from "fixed peripheral selection" (single device) to "variable peripheral selection" (multiple devices on the bus).
  - Add a new Function to the interface to control the timing and delays of the chip according the ChipSelect lines. This function can control the delay between the assertion of the ChipSelect and the first bit, between the last bit and the de-assertion of the ChipSelect and between two ChipSelects. This is needed to tune the transfer according the specification of the connected devices.
  - Add three "hw-features" for the SAMV7, which controls the behavior of the ChipSelect:
    1. force CS inactive after transfer: this forces a (short) de-assertion of the CS after a transfer, even if more data is
      available in time
    2. force CS active after transfer: this forces the CS to stay active after a transfer, even if the chip runs out of data. Btw.: this is a prerequisit to make the LASTXFER bit working at all.
    - escape LASTXFER: this suppresses the LASTXFER bit at the end of the  next transfer. The "escape"-Flag is reset automatically.
 2016-06-14 13:12:16 -06:00
Gregory Nutt
5cc9a13f95 arch/avr/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-14 12:45:12 -06:00
Gregory Nutt
688e553d1d arch/hc/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-14 12:38:40 -06:00
Gregory Nutt
64fa0ab51f Fix Kconfig dependency 2016-06-14 12:36:59 -06:00
Gregory Nutt
080aa07110 arch/mips/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-14 12:34:29 -06:00
Gregory Nutt
2f3b9ccc81 arch/rgmp/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-14 12:00:38 -06:00
Gregory Nutt
f165dd96bf arch/sh/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-14 11:53:36 -06:00
Gregory Nutt
dfc703f250 arch/sim/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-14 11:49:55 -06:00
Shirshak Sengupta
078e9b7082 Bug Fix in tiva_serial.c - UART5, UART6 and UART7 were not being configured as TTYS0 for printing over serial console 2016-06-14 10:47:18 -06:00
David Sidrane
0bded28cf3 Fix some naming errors that were recently introduced with mass substirutions 2016-06-14 09:42:04 -06:00
Gregory Nutt
01ee8ccc6c arch/x86/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-14 09:16:34 -06:00
Gregory Nutt
a98bc05f65 New debug macro: alert(). This is high priority, unconditional output and is used to simplify and stanardize crash error reporting. 2016-06-14 09:07:53 -06:00
David Sidrane
4f72ad74d2 configs/nucleo-144: Test F7 SPI 2016-06-14 07:30:28 -06:00
David Sidrane
ccfcb12ef7 STM32F7: Add SPI driver. DMA not yet supported. 2016-06-14 07:11:55 -06:00
David Sidrane
189b0d004f Added Pinmap to F7 2016-06-14 07:02:41 -06:00
David Sidrane
6d88df6802 Remove duplicate settings from stm32/Kconfig 2016-06-14 07:00:06 -06:00
Gregory Nutt
3659bf58c0 arch/z16/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-13 19:08:23 -06:00
Gregory Nutt
3c2050040c arch/z80/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-13 18:55:24 -06:00
Gregory Nutt
191d875b05 Cleanup of configs/teensy-2.0/src files 2016-06-13 16:03:16 -06:00
Gregory Nutt
749de40768 Teensy-2.0: Add board_app_initalize() 2016-06-13 15:13:19 -06:00
Gregory Nutt
fd57fde659 Back out part of previous commit 2016-06-13 14:44:28 -06:00
Gregory Nutt
93e7b5d7a0 Eliminate some warnings 2016-06-13 14:15:54 -06:00
Gregory Nutt
0f249016a0 Eliminate some warnings 2016-06-13 14:01:32 -06:00
Gregory Nutt
d5275e48d0 Eliminate some warnings 2016-06-13 13:16:03 -06:00
Gregory Nutt
eac916c907 Fix some warnings 2016-06-13 11:48:20 -06:00
Gregory Nutt
94f5e87222 configs/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-13 11:04:19 -06:00
Gregory Nutt
40f0481478 configs/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-13 09:44:12 -06:00
Gregory Nutt
90e60513b1 New strtoul[l] functions need to include errno.h 2016-06-13 08:49:46 -06:00
Gregory Nutt
b9aadf7242 configs/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-13 08:45:54 -06:00
Gregory Nutt
56c5da3030 Cosmetic change from review of PR53 2016-06-13 08:21:06 -06:00
Gregory Nutt
e064439cea Merged in slorquet/nuttx/fix_strtoul (pull request #53) 
Fixes for strtoul/strtoull. Fixes Issue #1
 2016-06-13 08:15:17 -06:00
Gregory Nutt
c494454bc4 configs/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-13 07:43:55 -06:00
Sebastien Lorquet
15c92867de Fixes for strtoul/strtoull. Fixes Issue #1 2016-06-13 15:29:05 +02:00
Gregory Nutt
5073bf1de6 Update some comments 2016-06-13 07:02:45 -06:00
Gregory Nutt
bed85cc515 configs/: Remove one more reference to non-existent SPI_VERBOSE setting 2016-06-12 18:48:13 -06:00
Gregory Nutt
b0458e36da configs/: Remove references to non-existent SPI_VERBOSE setting 2016-06-12 17:57:12 -06:00
Gregory Nutt
eab652bd9a Update ChangeLog 2016-06-12 17:34:42 -06:00
Gregory Nutt
a5457987d8 configs/: Change some err() ERRORS to warn() WARNINGS or info() 2016-06-12 17:02:46 -06:00
Gregory Nutt
26718cee5c Eliminate some warnings when CONFIG_DEBUG_FEATURES is enabled, but no output is enabled 2016-06-12 14:44:04 -06:00
Gregory Nutt
f3ec664f63 Debug output level (error, warning, info) is now selectable on a per-subsystem, per-driver basis 2016-06-12 13:08:23 -06:00
Gregory Nutt
cf4075c741 Missed macro definition in one case 2016-06-12 11:13:34 -06:00
Gregory Nutt
823b4b0cff Forget to define an info() macro 2016-06-12 11:11:08 -06:00
Gregory Nutt
4f97f15b5e graphics/, libc/: Change some err() ERRORS to warn() WARNINGS or info() 2016-06-12 11:11:57 -06:00
Gregory Nutt
b29a4dd49c audio/, crypto/, libnx/, and mm/: Change some err() ERRORS to warn() WARNINGS or info() 2016-06-12 09:46:23 -06:00
Gregory Nutt
0665c7e06c drivers/: Change some nerr() ERRORS to ninfo() and nwarn() WARNINGS. 2016-06-12 09:26:12 -06:00
Gregory Nutt
61969a5f88 Eliminate some warnings 2016-06-12 08:37:03 -06:00
Gregory Nutt
efb02f2ef1 drivers/: Change some nerr() ERRORS to nwarn() WARNINGS. Anomolous network evernts are not errors. 2016-06-12 08:31:22 -06:00