`include/nuttx/version.h` is dependent on `.version`, which needs to run for every invocation of make, since git info can update at any time.
Currently the `.version` target is PHONY, thus making `include/nuttx/version.h` and `context` targets (and every target that depends on `context`) have to run every time.
This PR modifies `.version` so it's a real rule. Additionally, `tools/version.sh` is run every invocation of make. This maintains the current behavior while preventing some targets from needlessly running every time
Polarfire Icicle board has only (128K - 256) bytes for the bootloader
in the non-volatile eNVM. This space is barely enough for running NuttX.
If OpenSBI is selected, it will be placed in DDR. This all means the
nuttx.bin file grows into gigabyte size, filling the unused space (ddr -
envm) with zeroes.
The memory layout is as follows:
MEMORY
{
ddr (rx) : ORIGIN = 0x80000000, LENGTH = 4M
envm (rx) : ORIGIN = 0x20220100, LENGTH = 128K - 256
l2lim (rwx) : ORIGIN = 0x08000000, LENGTH = 1024k
l2zerodevice (rwx) : ORIGIN = 0x0A000000, LENGTH = 512k
}
OpenSBI library is used as a separate binary, which is stored into
eMMC or SD-card. It is then loaded into its precise location in DDR.
Thus, we separate OpenSBI from NuttX and end up with two images
by utilizing the objcopy options:
--only-section=sectionpattern (-j in short)
--remove-section=sectionpattern (-R in short)
This is only valid when CONFIG_MPFS_OPENSBI is set.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
This PR updates the dependencies for `dirlinks` so they're all real files. This allows `dirlinks` rule to not have to be rerun every time.
This PR also changes the name from `dirlinks` to `.dirlinks`, since a file named `.dirlinks` is created to denote that all symlinks have been created
Changes:
* tools/link.sh
* link.sh now detects broken symlinks. Previously, it would return `0` if the symlink existed, but didn't point to anything.
* tools/Makefile.unix
* Added dependencies to symlinks as order-only prerequisites. See https://www.gnu.org/software/make/manual/html_node/Prerequisite-Types.html
* Removed `touch` from symlink recipes by specifying them as order only prerequisites.
* Check Kconfig variables before adding directories as symlinks
* Added rule for `$(TOPDIR)/arch/dummy/Kconfig`
* Added rule for `$(ARCH_SRC)/board/board`
* Added pattern rule (similar to `CONTEXTDIRS_DEPS`) for external folder dirlink dependencies
* Use $(APPDIR) instead of $(CONFIG_APPS_DIR), since on line 64 $(APPDIR) is validated and `realpath` is called on the path
* Added a rule `clean_dirlinks` to cleanup the symlinks in the correct order
* .gitignore
* Added ignore rule for `.dirlinks`
Testing
Step 1: configure nuttx:
```
$ (cd tools && ./configure.sh -a ../incubator-nuttx-apps stm32f3discovery:nsh)
```
part of the configure step ends up calling `.dirlinks`.
Step 2: We can confirm that `.dirlinks` doesn't need to be run again by running with the question flag: `--question`
```
$ make .dirlinks --question
$ echo $?
0
```
Step 3: confirm `make` succeeds.
```
make
```
These changes are from this PR: https://github.com/apache/incubator-nuttx/pull/5069
However I felt they were better as a stand only change.
The `.clean_context` dependency didn't make sense. It was a workaround to ensure that `context` was cleaned when the `.config` changed.
Rather than having a work around, this PR ensures that `clean_context` is run when the `olddefconfig` target is run
Verified locally by running: `tools/testbuild.sh -j 100 -e '-Wno-cpp -Werror' tools/ci/testlist/arm-01.dat`
This pull request improves the dependencies for Makefile.unix::context rule.
* `include/math.h`, `include/float.h`, `include/stdarg.h`, `include/setjmp.h` are only added to `context`'s dependency if the Kconfig value is set. This prevents `context` from trying to make `include/math.h` only to find out there's no command to create the file.
* Instead of executing $(CONTEXTDIRS) in a for loop in the `context` rule, $(CONTEXTDIRS) are added as a dependency to `context` and a rule is created to create the targets. Real files are used, to prevent needlessly rebuilding the same `context` over and over and over again.
* Instead of making the directory `staging`, add it as an order-only dependency for `context`. this ensures the directory is only created if it doesn't exist.
Tested by running:
```
(cd tools && ./configure.sh -a ../incubator-nuttx-apps stm32f3discovery:nsh)
make context
```
First time running context:
```
➜ incubator-nuttx git:(improve-make-context) time make context
make[1]: Entering directory '/home/user/code/fitbit/incubator-nuttx/tools'
make[1]: Leaving directory '/home/user/code/fitbit/incubator-nuttx/tools'
make[1]: Entering directory '/home/user/code/fitbit/incubator-nuttx'
make[2]: Entering directory '/home/user/code/fitbit/incubator-nuttx/boards'
make[2]: Leaving directory '/home/user/code/fitbit/incubator-nuttx/boards'
make[2]: Entering directory '/home/user/code/fitbit/incubator-nuttx-apps'
make[3]: Entering directory '/home/user/code/fitbit/incubator-nuttx-apps/platform'
make[3]: Leaving directory '/home/user/code/fitbit/incubator-nuttx-apps/platform'
make[3]: Entering directory '/home/user/code/fitbit/incubator-nuttx-apps/builtin'
make[3]: Leaving directory '/home/user/code/fitbit/incubator-nuttx-apps/builtin'
make[2]: Leaving directory '/home/user/code/fitbit/incubator-nuttx-apps'
make[2]: Entering directory '/home/user/code/fitbit/incubator-nuttx/graphics'
make[3]: Entering directory '/home/user/code/fitbit/incubator-nuttx/graphics/nxglib'
make[3]: Leaving directory '/home/user/code/fitbit/incubator-nuttx/graphics/nxglib'
make[3]: Entering directory '/home/user/code/fitbit/incubator-nuttx/graphics/nxglib'
make[3]: Leaving directory '/home/user/code/fitbit/incubator-nuttx/graphics/nxglib'
make[3]: Entering directory '/home/user/code/fitbit/incubator-nuttx/graphics/nxglib'
make[3]: Leaving directory '/home/user/code/fitbit/incubator-nuttx/graphics/nxglib'
make[2]: Leaving directory '/home/user/code/fitbit/incubator-nuttx/graphics'
make[1]: Leaving directory '/home/user/code/fitbit/incubator-nuttx'
Create .version
make[1]: Entering directory '/home/user/code/fitbit/incubator-nuttx/tools'
make[1]: Leaving directory '/home/user/code/fitbit/incubator-nuttx/tools'
Create version.h
LN: include/arch to arch/arm/include
LN: include/arch/board to /home/user/code/fitbit/incubator-nuttx/boards/arm/stm32/stm32f3discovery/include
LN: include/arch/chip to arch/arm/include/stm32
LN: arch/arm/src/board to /home/user/code/fitbit/incubator-nuttx/boards/arm/stm32/stm32f3discovery/../common
LN: arch/arm/src/board/board to /home/user/code/fitbit/incubator-nuttx/boards/arm/stm32/stm32f3discovery/src
LN: arch/arm/src/chip to arch/arm/src/stm32
LN: /home/user/code/fitbit/incubator-nuttx/drivers/platform to /home/user/code/fitbit/incubator-nuttx/drivers/dummy
make[1]: Entering directory '/home/user/code/fitbit/incubator-nuttx/boards'
make[1]: Leaving directory '/home/user/code/fitbit/incubator-nuttx/boards'
make[1]: Entering directory '/home/user/code/fitbit/incubator-nuttx-apps'
make[2]: Entering directory '/home/user/code/fitbit/incubator-nuttx-apps/platform'
LN: platform/board to /home/user/code/fitbit/incubator-nuttx-apps/platform/dummy
make[2]: Leaving directory '/home/user/code/fitbit/incubator-nuttx-apps/platform'
make[1]: Leaving directory '/home/user/code/fitbit/incubator-nuttx-apps'
make context 0.95s user 0.45s system 109% cpu 1.281 total
```
second time running context:
```
➜ incubator-nuttx git:(improve-make-context) time make context
Create .version
Create version.h
LN: include/arch/board to /home/user/code/fitbit/incubator-nuttx/boards/arm/stm32/stm32f3discovery/include
make[1]: Entering directory '/home/user/code/fitbit/incubator-nuttx/boards'
make[1]: Nothing to be done for 'dirlinks'.
make[1]: Leaving directory '/home/user/code/fitbit/incubator-nuttx/boards'
make[1]: Entering directory '/home/user/code/fitbit/incubator-nuttx-apps'
make[2]: Entering directory '/home/user/code/fitbit/incubator-nuttx-apps/platform'
LN: platform/board to /home/user/code/fitbit/incubator-nuttx-apps/platform/dummy
make[2]: Leaving directory '/home/user/code/fitbit/incubator-nuttx-apps/platform'
make[1]: Leaving directory '/home/user/code/fitbit/incubator-nuttx-apps'
make context 0.30s user 0.20s system 121% cpu 0.414 total
```
According to Make documentation:
- "Commas and unmatched parentheses or braces cannot appear in the text
of an argument as written";
- "Leading spaces cannot appear in the text of the first argument as
written".
Although in the current state it was not resulting in parsing issues, it
is better to fix it.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
let the nuttx print out symbolic crash information and
symbolic stack backtraces. This increases the size of the nuttx
somewhat, as all symbols have to be loaded into the nuttx image.
Signed-off-by: chao.an <anchao@xiaomi.com>
Add a resource statistics script, which can be used to
analyze the resource occupation of ELF files, including
BSS, data, ROM, etc.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
LICENSE: Add size_report to license file
Declare license for intel Corporation.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Use `JLinkGDBServer -rtos libnuttxplugin` to add this plugin.
Then in gdb can use command:
- `info threads` to show all threads infos
- `thread (id) ` to switch thread.
- `bt` to show thread backtrace.
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
When nxstyle.c detects a "\'", it seeks the other "\'", records the index as "endndx", then skip the "'x'". But it makes the index "n" as "endndx+1".Then it comes to the "n++" in "for()". So the character after "'x'" will be skipped, causing some errors.
For example, "{"devid", no_argument, NULL, 'i'},", the "}" will be skipped, causing a lot of error reports.
Now it's fixed.
Signed-off-by: liucheng5 <liucheng5@xiaomi.com>
This patch adds -B switch to select BSD host platforms.
Linux uses GNU Make as default, command is `make`.
BSD uses BSD Make as default, command is also `make`.
BSD can also use GNU Make, but the command is `gmake`.
This patch uses `make` on GNU platforms and `gmake` on BSD platforms.
Signed-off-by: Tomasz 'CeDeROM' CEDRO <tomek@cedro.info>
tools/sethost.sh: Add BSD host (-B switch) + MAKECMD (make vs gmake).
Signed-off-by: Tomasz 'CeDeROM' CEDRO <tomek@cedro.info>
tools/configure.c: Add BSD host (-B switch).
Signed-off-by: Tomasz 'CeDeROM' CEDRO <tomek@cedro.info>
This helps when redirecting stdout to /dev/null (as in the CI for example) and still be able to catch error output.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
The nxstyle check tool can't recongnize the style error that --, -> or ++ is not next to the operand. For example, "idx ++;", "p ->member" or "(-- idx)", which is in incorrect style, is not recongnized. This patch add detection for these cases.
Signed-off-by: liucheng5 <liucheng5@xiaomi.com>
This is only useful when the path to binary files (e.g. bootloader) is
provided via the ESPTOOL_BINDIR variable.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
The nxstyle check tool recognizes the division operator as
a comment. Check the following content to determine whether
it is a comment.
Change-Id: Id07c6668489895b45a1042794bc3acca66cd3c47
Signed-off-by: yangjiukui <yangjiukui@xiaomi.com>
When SIM_SPI is valid, a specified Linux SPI device ‘spidevN.P’(N is bus number and P is CS number) is attached to nuttx simulator, shown as 'spi0' under /dev. One may type spi command (need SPITOOL valid) in NSH to control the Linux SPI and exchange data, other devices such sensors can use it to debug in simulator on a Ubuntu PC. Note that a USB<>SPI module (e.g. CH341A/B) should be plugged in to achieve Linux SPI ports.
Change-Id: I275b2c2bbf6d14bcdf514c89efb9a2264d69e9a3
Signed-off-by: liucheng5 <liucheng5@xiaomi.com>
In multi-jobs build, `distclean` may be faster than `clean_context`,
Fix the case `distclean` use the dirctorys that have been
removed by `clean_context` in board/xtensa with xt-xcc
This is just a workaround for adding the MCUboot signed binary image to
the clean step of the build system. Once the NuttX build system becomes
aware of general signed images, a new naming pattern should be defined
for the signed images to be used by every platform.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
This is mainly required for macOS builds which do not rely on a base
Docker image that would contain imgtool already preinstalled.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
Cleaning during `clean_context` had the issue of remaking everything
when `menuconfig` was issued. That's because `menuconfig` has a
`clean_context` on its way.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Summary:
- I noticed that nuttx-gdbinit does not work.
- Finally, I found that the g_pidhash had been changed recently.
- This commit fixes this issue.
Impact:
- None
Testing:
- Tested with lm3s6965-ek:discover (QEMU)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Fix an issue that the nuttx version is not '10.1.0' but '10.1.0-RC1'
on the master branch. Add a pattern match of "nuttx-" to tags obtained
from git describe.
* it wasn't intended.
* it doesn't always work:
(gdb) source tools/esp32/backtrace.gdbscript
(gdb) esp32_bt 0x40139706 0x80139811 0x3ffafd40
Attempt to assign to an unmodifiable value.
(gdb)
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
