David Sidrane
a2052d006c
Fix what I believe to be typos in SAMV7 timer
2016-03-08 17:26:01 -06:00
David Sidrane
72eef9f628
Ensure that CONFIG_ARMV7M_STACKCHECK works on the samv7
2016-03-08 17:22:07 -06:00
Gregory Nutt
85a7ca1ddd
i.MX6: Fill in some 'Missing logic' that depended on CCM definitions. Correct confusion with boot media configuration.
2016-03-08 16:49:09 -06:00
Gregory Nutt
145853a930
i.MX6: Complete CCM header file
2016-03-08 13:54:43 -06:00
Frank Benkert
73de0d9114
SAMV7: TWIHS: Correct Error Handling
2016-03-08 06:47:22 -06:00
Frank Benkert
945e137382
SAMV7: TWIHS: Correct timeout calculation; correct some issues with Multi-Message-Transfer
2016-03-08 06:44:41 -06:00
Gregory Nutt
f46298105a
i.MX6: Add skeleton clockconfig file. Fix some naming problems. Add some warnings.
2016-03-07 16:14:13 -06:00
Gregory Nutt
0d7edfd370
i.MX6: Add CCM header file
2016-03-07 15:01:38 -06:00
Gregory Nutt
3b1812b50f
i.MX6 UART: Update periperal clock logic; Remove use of UART bits from i.MX1 that don't exist in i.MX6
2016-03-07 14:08:53 -06:00
Gregory Nutt
912008a883
i.MX6: Finish off some missing IOMUXC register bit definitions
2016-03-07 12:22:27 -06:00
Gregory Nutt
012f1c0e90
i.MX6: Some fixes for compiling imx_lowput.c. Still some missing clocking definitions.
2016-03-07 09:02:29 -06:00
Gregory Nutt
a67de9ce24
i.MX6: Add imx_lowputc.c; repartition some serial logic
2016-03-07 08:21:03 -06:00
Gregory Nutt
1992d57294
i.MX6: Add pin multiplexing header file
2016-03-06 21:30:37 -06:00
Gregory Nutt
dd7a4fb6a4
i.MX6: Modify encoding of GPIOs; add support for peripherals
2016-03-06 16:19:14 -06:00
Gregory Nutt
be594b8932
i.MX6 Add more IOMUX logic
2016-03-06 15:44:54 -06:00
Gregory Nutt
2b0124b9f2
i.MX6: Add a little more GPIO/IOMUX logic
2016-03-06 13:49:34 -06:00
Gregory Nutt
cbf7401dfb
i.MX6 GPIO: Add IOMUXC logic to set pin as a GPIO
2016-03-06 12:24:24 -06:00
Gregory Nutt
0f825eed3d
i.MX6: Add PADCTL register offsets
2016-03-06 09:37:43 -06:00
Gregory Nutt
af76adf06f
i.MX6: Simply some IOMUXC naming
2016-03-06 08:54:45 -06:00
Gregory Nutt
dd27fce4eb
Remove some whitespace at the end of the line
2016-03-05 09:18:30 -06:00
Gregory Nutt
56eebbbfe1
i.MX6: Add some basic, incomplete GPIO controls
2016-03-05 09:16:08 -06:00
Gregory Nutt
d938c1cd8c
SAMV7: Use sem_reset() instead of sem_init() to set a semaphore count
2016-03-05 07:44:18 -06:00
Gregory Nutt
5c881e6d2e
i.MX6: minor updates to last commit
2016-03-04 18:44:30 -06:00
Gregory Nutt
5100e7a623
i.MX6: Add some preliminary definitions to handle other family members
2016-03-04 18:43:16 -06:00
Gregory Nutt
f41189d828
i.MX6: Add IOMUXC header file
2016-03-04 16:19:34 -06:00
Frank Benkert
2297fdb714
SAMV71 and SAME70: Place the Main Oscillator Enable in the board.h
2016-03-04 12:31:54 -06:00
Gregory Nutt
88f0d35bce
i.MX6: Add high-level GPIO header file
2016-03-04 12:27:11 -06:00
Gregory Nutt
910e649616
Add a debug assertion for logic error in previous commit
2016-03-04 10:28:13 -06:00
Frank Benkert
a115e13e06
SAMV7 MCAN: use FIFO mode instead of QUEUE mode; improve error reporting
...
When using QUEUE mode sometimes the counting semaphore indicates there is no space left in the TX buffers, but in fact there is. This leads to a situation, where all TX buffers are empty and the driver
still waits for space in the buffers. The switch from QUEUE mode to FIFO mode is just a workarround to make the semaphore counting self repairing.
The Error reporting is changed due to some Error Interrupts not reporting states, they are reporting state changes. To keep this into Account the static Error conditions like WARNING, PASSIVE or BUS_OFF are filled in
every time.
2016-03-04 10:15:35 -06:00
Gregory Nutt
7fd57d1591
Some fixes to last commit
2016-03-04 08:20:28 -06:00
Gregory Nutt
7887971ea5
i.MX6: Add GPIO header file
2016-03-04 08:17:13 -06:00
Gregory Nutt
f74d2a9f51
i.MX1: Rename imx_boardinitialize to imx_board_initialize
2016-03-03 16:42:07 -06:00
Gregory Nutt
16e93f5d41
i.MX6: Bring i.MX1 serial driver into i.MX6. Basically the same IP but does not yet compile due to some small differences, missign GPIO configuration logic, and missing clocking logic
2016-03-03 16:31:56 -06:00
Gregory Nutt
bff9eaab1e
i.MX6: Add UART header file
2016-03-03 15:11:26 -06:00
Gregory Nutt
c404eae718
Costmetic update to comments
2016-03-03 09:12:13 -06:00
Gregory Nutt
3a14a4c4c6
i.MX6: Put in basic framework for interrupt handling
2016-03-03 08:50:56 -06:00
Gregory Nutt
a0783791a9
GIC: Fix some name collisions and naming inconsistencies
2016-03-03 08:50:25 -06:00
Gregory Nutt
c75e594350
SAMV7 USBHS Device: Reorder some interrupt handling logic to avoid losing an interrupt and to avoid a race condition
2016-03-02 14:58:17 -06:00
Gregory Nutt
52d499ba33
ARMv7-A: Add hooks for some common GIC logic
2016-03-02 14:56:54 -06:00
Gregory Nutt
5703f72a94
i.MX6: Add some boot logic. Mostly just cloned from the SAMA5D
2016-03-02 12:59:41 -06:00
Gregory Nutt
bed5aa8731
Add IMX_NCPUS to i.MX6 chip.h file
2016-03-02 10:28:09 -06:00
Gregory Nutt
0270530f75
Cosmetic change to spacing
2016-03-01 14:42:13 -06:00
Gregory Nutt
b466f18daf
i.MX6: Some fixes for early compile issues
2016-03-01 14:15:43 -06:00
Gregory Nutt
db61cdefe7
Merge branch 'master' of bitbucket.org:nuttx/arch
2016-03-01 12:56:58 -06:00
Gregory Nutt
c05ae8ee99
i.MX6: Add basic memory map tables
2016-03-01 12:56:36 -06:00
Gregory Nutt
db331d47dd
ARMv7-A: Clean up some kruft in gic.h
2016-03-01 12:55:48 -06:00
Gregory Nutt
2cafb5cf6c
ARMv7-A: Clean up some kruft in gic.h
2016-03-01 12:55:39 -06:00
Gregory Nutt
52d777fa8d
Merged in paulpatience/nuttx-arch/stm32f469 (pull request #56 )
...
STM32: Add support for STM32F46xxx
2016-03-01 11:53:07 -06:00
Gregory Nutt
f552aa3ee8
Merged in paulpatience/nuttx-arch/stm32f30xxx_pinmap (pull request #55 )
...
STM32: Rename STM32F30xxx ADC pins to be more consistent
2016-03-01 11:38:44 -06:00
Paul A. Patience
099990f3da
STM32: Add support for STM32F46xxx
2016-03-01 12:18:07 -05:00
