Commit Graph

3434 Commits

Author SHA1 Message Date
Gregory Nutt
a2a5c47d9d Tive Timer: Add support for ADC trigger generation from one-shot and periodic timers for timeout and match evetns 2015-01-10 10:07:56 -06:00
Gregory Nutt
2eeca96330 Tiva Timer: Add support to set the match regiser(s) relative to the timer counter (and prescale) registers. Enable match interrupts. These are one time interruprts: After the match interrupt is dispatched, further match interrupts are disabled 2015-01-10 08:34:39 -06:00
Gregory Nutt
2871677362 Tiva Timer: Add support for input clock prescaler in 16-bit one-shot/periodic modes 2015-01-09 16:49:00 -06:00
Gregory Nutt
df48abcc47 Tiva Timer: Add logic to acknowledge Tiva Timer interrupts 2015-01-09 15:01:49 -06:00
Gregory Nutt
9ae597c441 Tive System Control: Add logic to configure the alternatie clock source (ALTCLK). Needed by the Tiva timer module 2015-01-09 14:10:31 -06:00
Gregory Nutt
7384857658 Tiva Timer: Add more interrupt management logic 2015-01-09 13:29:03 -06:00
Gregory Nutt
626d6cdab4 Tiva Timer: Add functions to set match registers; Add logic to select count direction 2015-01-09 12:05:26 -06:00
Gregory Nutt
8552b2f679 Tiva Timer: Add interfaces to start/stop timers and to set the interval load registers. 2015-01-09 11:07:52 -06:00
Gregory Nutt
d5d3a23ac3 Tiva Timers: Add framework to support tmer interrupts 2015-01-09 10:21:59 -06:00
Gregory Nutt
1193b4aa55 STM32 SDIO: Don't let architectures select CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE unless they have implemented SDIOWAIT_WRCOMPLETE 2015-01-08 17:47:34 -06:00
Gregory Nutt
09bd382697 Tiva Timer: Partial support for 16- and 32-bit, oneshot and periodic timer configurations 2015-01-08 13:44:10 -06:00
Gregory Nutt
58818e1afd Tiva Timer: Add support to select alternate clock source and 32-bit register concatenation mode. 2015-01-08 11:08:54 -06:00
Gregory Nutt
d3bc0b7223 Tiva Timer: Add register level debug support 2015-01-08 10:14:38 -06:00
Gregory Nutt
6c612cf967 Tiva Timer: Add basic framework to configure timers. Incomplete on initial commit 2015-01-08 09:47:38 -06:00
Gregory Nutt
92dc58c376 Tiva Timer: SYNC regiser is only available on GPTM0 2015-01-08 08:07:31 -06:00
Gregory Nutt
e55df605a8 Tiva Timer: Update timer register bit definitions for the LM4F 2015-01-08 08:03:47 -06:00
Gregory Nutt
1ed2956ad5 Tiva Timer: Extend timer register definitions to handle other chips 2015-01-08 07:56:00 -06:00
Gregory Nutt
1ace391fcf MMCSD SDIO: Add support for a new SDWAIT_WRCOMPLETE condition. The previous logic used a busy-wait loop to pool the card R1 start to determine when the card was ready for the next transfer. That busy-wait can be quite long -- hundreds of milliseconds. And alternative is to look the the SD D0 pin which will change state when the card is no longer busy.
This logic implements a change the avoids the busy-wait poll by reconfiguring the SD D0 pin as a GPIO interrupt, then waiting for the card to becom ready without taking up CPU cycles.

This change is conditioned on CONFIG_MMCSD_SDIOWATI_WRCOMPLETE and is currenlty only implemented for the STM32 SDIO driver.

From David Sidrane
2015-01-08 06:23:42 -06:00
Gregory Nutt
5c68f0dd34 Tiva Timer: Missed one register bit field definition 2015-01-07 12:03:08 -06:00
Gregory Nutt
9eb693845e TM4C129X Timer: Completes timer register definition header file 2015-01-07 11:43:56 -06:00
Gregory Nutt
81afc06f54 TM4C129X Timer: Add some missing addresses and some of the register bit definitions. Still incomplete 2015-01-07 10:07:47 -06:00
Gregory Nutt
28a52cbd23 TM4C129X Timer: Update addresses in the timer register definitions file. Still missing bit field definitions 2015-01-07 08:57:48 -06:00
Gregory Nutt
0748291ce9 Tiva IRQs: Fix IRQ control logic; was limited to only 64 IRQs. That is a problem for higher numbered IRQs on many platforms 2015-01-06 10:49:47 -06:00
Gregory Nutt
c429a4d93f Tiva I2C: For TM4C, high speed mode is now configurable (but disabled as EXPERIMENTAL) 2015-01-06 10:48:08 -06:00
Gregory Nutt
10b349bd1a Tiva PHY Interrupts: Need to read the PHY interrupt status register in order to clear the pending PHY interrupt 2015-01-05 15:12:45 -06:00
Gregory Nutt
52c4334429 Tiva: Fixes to support building Tiva TM4C129X I2C driver 2015-01-05 13:15:40 -06:00
Gregory Nutt
67aeab7105 Tiva: Update I2C register definitions to include support for the TM4C129X 2015-01-05 13:08:07 -06:00
Gregory Nutt
c4f64c72c8 Tiva Ethernet: Add support for PHY interrupts 2015-01-03 13:16:26 -06:00
Gregory Nutt
40113f0b93 Tiva Ethernet: Configure external PHY interrupt pin 2015-01-03 10:59:12 -06:00
Gregory Nutt
a7e0acbc6f Tiva Ethernet: Removed logic that holds the PHY and re-ordered some reset logic. Can not ping the DK 2015-01-03 09:28:54 -06:00
Gregory Nutt
15f0a046fd Tive Ethernet: Wait for EMAC to come out of reset before accessing any registers 2015-01-03 06:52:19 -06:00
Gregory Nutt
6bb12a34dc Tiva serial: Add volatile to fix a wait loop that was not waiting; CR really should preced LF in CR-LF expansion 2015-01-02 14:05:42 -06:00
Gregory Nutt
28d44e1b30 Cosmetic changes 2015-01-02 13:59:47 -06:00
Gregory Nutt
b828741900 Tiva: Fix typos in conditional compilation 2015-01-02 13:59:30 -06:00
Gregory Nutt
91a92fc538 Tiva Ethernet: Add lots of debug output for testing 2015-01-02 13:10:25 -06:00
Gregory Nutt
ce3dac34b2 Tiva: If peripheral ready register not available, then lets say the peripheral is ready 2015-01-02 12:58:20 -06:00
Gregory Nutt
194e5a9600 Tiva: Wait for the console UART to be ready before configuring it 2015-01-02 12:57:41 -06:00
Gregory Nutt
47b8ce855e Tiva Ethernet: Fix compile problem when debug enabled 2015-01-02 12:04:22 -06:00
Gregory Nutt
86dc1726aa Tiva GPIO: Fix a compiler error when debug is enabled with TM4C129X 2015-01-02 11:53:02 -06:00
Gregory Nutt
9688a9aacb Tiva Ethernet: MMC interrupts need to be disable initially 2015-01-02 11:40:48 -06:00
Gregory Nutt
ea3895c2e8 Tiva Ethernet: Update DMA BUSMODE settings based on TI example code 2015-01-02 11:10:41 -06:00
Gregory Nutt
67699b8cae Tiva Ethernet: Update PHY initialization 2015-01-02 10:11:57 -06:00
Gregory Nutt
a97d304d1a STM32 RTC: Add Kconfig options needed with the preceding commit 2015-01-02 06:45:45 -06:00
Gregory Nutt
7b89f64b37 stm32-rtc: Add support for the internal low speed clock (LSI)
Some boards do not have the external 32khz oscillator installed, for those boards we must fallback to the crummy to the crummy internal RC clock.  Turn on by defining CONFIG_RTC_LSICLOCK.

From Kevin Hester <kevinh@geeksville.com> via Lorenz Meier.
2015-01-02 06:32:40 -06:00
Gregory Nutt
367af5c65d Cosmetic update to some comments 2015-01-02 06:07:56 -06:00
Gregory Nutt
adb9ac6c60 Cosmetic change to file formatting 2015-01-01 15:55:33 -06:00
Gregory Nutt
bc3fc9e3a3 TM4C129X Ethernet: Add logic to get pre-programmed MAC address from user FLASH registers 2015-01-01 12:28:46 -06:00
Gregory Nutt
48f6e06ed1 Tiva FLASH: Add FLASH register definitions for the TM4C129 family 2015-01-01 11:44:35 -06:00
Gregory Nutt
e83f531724 Tiva PHY: Hard code some properties of the internal PHY 2015-01-01 08:11:17 -06:00
Gregory Nutt
14992be38f Tiva Ethernet: Update Ethernet intializaiton logic. Still things to be done 2015-01-01 07:55:15 -06:00