This is a collection of tweaks / optimizations to the driver to limit
CPU usage as well as interrupt processing times.
The changes are as follows:
- setfrequency is now no-op if the frequency does not change. Accessing
MPFS_SPI_CONTROL requires synchronization to the FIC domain, which
takes unnecessary time if nothing changes
- load/unload FIFO loops optimized so !buffer, priv->nbits and i==last are
only tested once (instead of for every word written in loop).
- Disable the RX interrupt only once (again, FIC domain access is slow)
- In case a spurious MPFS_SPI_DATA_RX interrupt arrives, just wipe the
whole RX FIFO, instead of trying to read it byte-by-byte
stm32_ifdown() holds critical section when calling stm32_ethreset().
That function used to call up_mdelay(10) while waiting for the ethernet
peripheral reset to complete. This resulted in excessively long
critical section time with interrupts disabled.
The actual expected delay is a few clock ticks of the 50 MHz clock domain.
This commit changes polling interval to 1us and maximum to 10us.
if not unlink shm, the shared memory object still exists in host /dev/shm after quit
if nuttx is started with administrator privileges, or if it is restarted with user
privileges, there will be a problem with the permission to open this shm file
Signed-off-by: yintao <yintao@xiaomi.com>
PMPCFG_A_TOR region may have zero size. The pmp configuration
currently fails for zero-sized TOR. This patch bypasses such a
restriction.
Also replace log2ceil with LOG2_CEIL from lib/math32.h.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
This commit adds support for 1 wire interface over serial driver. SAMv7
MCU does not have build in one wire support therefore external hardware
still has to be used (connection of RX/TX for example).
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
UART/USART peripheral can be used for more than just standard serial
driver. It can for example be used for 1 wire interface communication
(with external circuitry added). This changes the Kconfig for SAMv7 to
allow future implementation of these drivers. Now user can select
what kind of a driver he wants on UART/USART (serial or something else).
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Follow other risc-v based chips, and fix:
```
chip/rv32m1_irq.c: In function 'up_irqinitialize':
Error: chip/rv32m1_irq.c:98:3: error: array subscript -2048 is outside array bounds of 'uint8_t[2147483647]' {aka 'unsigned char[2147483647]'} [-Werror=array-bounds]
98 | riscv_stack_color(g_intstacktop - intstack_size, intstack_size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /github/workspace/sources/nuttx/arch/risc-v/src/common/riscv_internal.h:40,
from chip/rv32m1_irq.c:36:
/github/workspace/sources/nuttx/arch/risc-v/src/common/riscv_common_memorymap.h:72:16: note: at offset -2048 into object 'g_intstacktop' of size [0, 2147483647]
72 | EXTERN uint8_t g_intstacktop[]; /* Initial top of interrupt stack */
| ^~~~~~~~~~~~~
cc1: all warnings being treated as errors
```
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Summary
Add ARM PCSI (Power State Coordination Interface) Support
for qemu. With the interface, Poweroff/PowerReset can be support
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
Summary:
Adding virtual evaluate platform GoldFish. Which is based on
Android Goldfish Emulator, it's a ARM virt board but Android enhance
it with more featue
The patch set goldfish as a chip
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
Summary
when using new gcc verion like:
GNU ld (Arm GNU Toolchain 12.2.Rel1 (Build arm-12.24)) 2.39.0.20221210)
we will get link warning like:
aarch64-none-elf-ld: warning: XXX/nuttx has a LOAD segment with RWX permissions
The patch fix the warning through add link option --no-warn-rwx-segments
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
